Hello. I purchased SM-G920TZKAXAR , Unlocked US version
http://www.samsung.com/us/mobile/cell-phones/SM-G920TZKAXAR
Then I tried to root it by following this guide: http://joyofandroid.com/root-samsung-galaxy-s6/ and using Method 2 via TWRP and then flashing cf-autoroute from https://autoroot.chainfire.eu/ . I downloaded zerofltetmo LRX22G.G920TUVU1AOC9 for SM-G920T.
my process:
1. Copied CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t onto phone
2. entered Downloading mode and then connected Odin
3. PHone rebooted into TWRP and then I proceeded to flash CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.
As a result I get bootloop.
I tried downloading stock T-mobile firmware and flashing to via ODIN but it FAILED in Odin/Download mode due to SW rev check not validating. I tried to use different version of TWRP, 2.8.7.2 , 2.8.7.1 and 2.8.7.0 but bootloop continues
What can do I to fix this? I don't know what else I can try and I can't locate a stock firmware for SM-G920TZKAXAR if such exist.
Thanks!
Related
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp 2.7
I was previously rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/showthread.php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/showthread.php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously rooted
it did not have any recovery software installed
no roms had been flashed previously.
I have tried a few different methods to root this. I recently upgraded the firmware with samsung's official lolipop download via odin. works fine. installed twrp via odin, works fine. but when i try to root it sends it into a boot loop.
So basically I managed to brick my new S6. I rooted it by flashing the unibase with odin. The phone booted correctly and everything was fine. I then decided I needed a custom recovery. I used the application Flashify to flash the recovery. When the phone rebooted, it was stuck on the Samsung logo, with a red message at the stop saying "recovery is not seandroid". What do I do? I'm guessing I need to flash new files using odin but I don't know which - I'm on android 5.1.1 and my model number is SM-G920F. Any help would be appreciated.
In Odin install the .tar (or .tar.md5) files provided with TWRP (https://dl.twrp.me/zeroflte/twrp-2.8.7.2-zeroflte.img.tar.html) or PhilZ Touch Recovery (http://www.arter97.com/browse/exynos7420/recovery/11.0/g920fi/) made by arter97.
It is possible that installing TWRP again using Odin can cause the S6 going into another bootloop. My solution for that is to flash a kernel (like arter97's one or Adam Kernel) and then the phone should boot just fine.
Edit: If you will flash a custom kernel you will not need to root the phone again because these contain SuperSU and maybe Busybox.
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
georgemshaty said:
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
Click to expand...
Click to collapse
Samsung has download mode, not bootloader mode(kinda the same but not exactly because download mode is not fastboot compatible but devices with bootloader mode are fastboot compatible).
As for the issues you're having, try this thread for troubleshooting a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Sent from my LGL84VL using Tapatalk
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap.
EmiliuxPlayz said:
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap.
Click to expand...
Click to collapse
tried all the usb sockets on my computer, noting changed
When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again."
Install TWRP Recovery in your Note 4 I had also this issue early. First Root your device then install twrp recovery and download Tedy Bear Rom Android 6 Marshmallow easily Available on this thread https://forum.xda-developers.com/t/...10c-h-tedybear-rom-v1-5-updated-v1-5.3768967/