When my phone boots up it shows the logo then it shows at the top where its checking internal card whatever then the screen goes blank, it only comes up to view when i touch the top button, i think its booting to the standby mode it did it before gingerbread update and after ,i dont really mind cause all i need to do is press the top on button once to get my display up just it seems a bit strange to do this though evry time.
synthkid2 said:
When my phone boots up it shows the logo then it shows at the top where its checking internal card whatever then the screen goes blank, it only comes up to view when i touch the top button, i think its booting to the standby mode it did it before gingerbread update and after ,i dont really mind cause all i need to do is press the top on button once to get my display up just it seems a bit strange to do this though evry time.
Click to expand...
Click to collapse
change the --> settings in the display, you'll figure it out there............
its not stdby by the way its just saving power by turning off the screen....
I checked display settings and i,m set at 1 minute ,but cant see any power saving .
synthkid2 said:
I checked display settings and i,m set at 1 minute ,but cant see any power saving .
Click to expand...
Click to collapse
Yes, it aint there. Been looking for it also. I'll try to if someone has successfully changed it. Probably a setting in the build.prop.
If you read the post carefully you might figure it out by yourself!
Its a simple settings option that tells the screen to go blank its in settings/display/screen timeout on all stock roms.
Sent from my LG-P920 using Tapatalk
I've had an odd problem with my 820 almost since getting. I'm hoping one of you geniuses have some advice.
When I turn it on it works perfectly, sometimes for hours. Then the screen goes blank, and then random pixels begin to appear, starting at the top of the screen. Outdoors rather than random pixels the screen goes almost totally green. Strangely, if part of the screen is obscured the green only covers rhe exposed area.
Pressing the on button repeatedly usually brings back the lock screen and reset (on+down) fixes the problem for another few hours.
By the way, eventhough I can't see the screen the touch sensor works. For instance I can hold theon button and then swipe downwards to turn off the phone. I can also answer and hang up using earphones.
My daughter who purchased the phone said it worked fine until the amber update. I had hoped the black update would fix the problem but no change. I found some posts from people with the same problem who sent the phone in to be fixed and got it back in the same condition. I really don't want to go through the hassle unless I expect to get it back fixed. I'd rather try fixing it myself.
My question is whether this is a firmware problem an whether it is likely that re-installing the stock black rom would do any more than the ota install that occurred automatically did (or didn't do).
Any ideas?
Nobody?
By the way it seems to happen only, or mostly when in standby.
I installed an app that displays a clock and doesn't allow the phone to go into standby mode,
and the problem doesn't appear to occur (unless I forget to leave the app on top).
I would set the phone to standby = "never" but the option isn't available on my phone, though
I understand that there are those with the standby = "never" option.
Any idea if I can set standby = "never" with keyboard commands, perhaps?
Hi all !!! Sorry for my English but I need your help
I commented what is happening with my phone N5 (which for good and evil is always stock without root or anything, with corresponding OTA updates.)
1- Yesterday afternoon at lunchtime while reading a book in playbooks, I notice that suddenly disappears one line and then appeared intermittently. I close the app and noticed the same thing happening on the screen menu. I shut down the cell and turn on again and I thought it must be an application be kidding. But still does.
2 Also yesterday I happened to change the security on the phone screen. After a while of normal operation, try to turn it on the screen with the button, nothing, the screen goes "black", with light and retrolight turned on but no picture no nothing .
Called the cell to see if it works or is turned off and the phone rings but the screen nothing. Try turning it off and on again by holding the on / off / lock button and the phone restarts, but the screen nothing. In one such attempt to do the above it is seen that managed to turn it off. And I get it on and do a normal boot, except that the picture of my screen is changed to the original. Change the lock screen which was previously using (slip). And it seemed that out or some conflict with the lock. In one of those again pressed the ON / OFF / lock as would normally and it starts all over again.
After I magically back to life, I want to make a full wipe as I think it should be an app that is doing some conflict or something. BUT ....
3I turn off the phone and then press the keys VOLUME UP / DOWN and ON / OFF is normally off, squeezed the first screen with the options but options RECOVERY / BOOTLOADER appears in red I choose RECOVERY give the ok with the key and .... andriod robot appears with the legend below that says something (I do not remember well) without or without controls options appears. So its seems thatI dont have recovery.
After that keep pressing the key ON / OFF and the phone turns off and / or reboot normally. All this I did it again to see if the error reappears and looks that I do not have recovery.
The failure of the screen is increasing. I dont know if they are separate problems or is it all the same problem.
Sorry if I was too long but I need the help of you.
UPDATE Now it seems that the screen died, since I do not achieve to turn it on as before, the light and the retrolight its ok. The phone receives calls and notifications but the screen stills black.
Thanks all.
Matias M 73
the android laying on its back IS the atock recovery.
simms22 said:
the android laying on its back IS the atock recovery.
Click to expand...
Click to collapse
thank you simms22 but I need to fix or understand what happend with the screen first.
:good::good:
Matias M 73 said:
thank you simms22 but I need to fix or understand what happend with the screen first.
:good::good:
Click to expand...
Click to collapse
sometimes things just "derp". itll happen more often if you dont reboot your phone often. also, your phone will be a little bit more responsive if it gets reboot once a day or two.
RMA or fastboot it back to stock, if the screen doesnt turn on afterwards then it looks like a hardware issue, open device and reconnect the display.
republicano said:
RMA or fastboot it back to stock, if the screen doesnt turn on afterwards then it looks like a hardware issue, open device and reconnect the display.
Click to expand...
Click to collapse
Thank you Republicano!!
I think too that its a hardware issue. I already see on you tube problems like mine.
Thanks again!!
Hi I just got my phone yesterday and when my phone screen timeout triggered it show me this(attachment) and to get rid of that I can only press to power button twice to get on to the lockscreen and unlock my phone then everything goes normal and I must say this is quite annoying. Please help me guys.
Ps:the picture is not cropped or anything it's cut and I can't read it as well.
This is it. Closed
It is the second time this happened. Last time it fixed itself after half an hour.
The screen is always pitch black and the device stays warm.
Most of the time it is boot looping with a black screen, the 5G led on the back keeps blinking in different colours. When connected to a PC, in Device Manager I can see two "LG-V500N", then it disappears after a minute, and comes back, repeat.
Sometimes the device boots and stay booted with a black screen, I can tell the device is on because it is listed in "adb devices". Unfortunately I don't have any authorized device to connect to it via adb.
I am not sure what I can try, I have pressed and hold power + vol down many times but the screen remains black.
I also have trouble switching off the device, it seems to either stay on or boot loop.
After letting it rest for a few hours, switching it on shows this screen, with a white/gray line at the top of the screen, and after 5 seconds it switches itself off again.
k3vink3vin said:
After letting it rest for a few hours, switching it on shows this screen, with a white/gray line at the top of the screen, and after 5 seconds it switches itself off again.
Click to expand...
Click to collapse
Get into download mode by powering off the phone and pressing volume up while having it plugged into a PC. Then find a guide to flash a kdz lgup. You will probably lose data or have already lost it
antintin said:
Get into download mode by powering off the phone and pressing volume up while having it plugged into a PC. Then find a guide to flash a kdz lgup. You will probably lose data or have already lost it
Click to expand...
Click to collapse
It seems the phone will not stay in download mode for more than 5 seconds, it powers off after showing the big download mode screen for 5 seconds.
I will try to leave my phone on the charger for some time and then try again.
antintin said:
Get into download mode by powering off the phone and pressing volume up while having it plugged into a PC. Then find a guide to flash a kdz lgup. You will probably lose data or have already lost it
Click to expand...
Click to collapse
I managed to get the device to enter and stay in download mode, however the screen stays pitch black and I am not sure if I should continue flashing.
Would you go ahead and flash it if you were me?
The device is currently on Pie, I will probably try flashing a Pie KDZ first, before an Android 10 KDZ.
Sometimes there is a brief moment where the screen comes on, that's when the LG V50 logo shows before entering download mode.
Did an UPGRADE with V500N11r_00_KT_KR_OP_1017.kdz, which should be the same firmware that the device is already on, it flashed successfully, didn't seem to help, screen remains pitch black.
Did a REFURBISH with the same kdz, didn't seem to help either.
The phone seems to continue to boot loop after the REFURBISH flash. When connected to PC, LG-V500N shows up and then disappears repeatedly. Sometimes I can hear a sound effect being played from the phone, sounds like it has booted and the sound probably came from the initial setup screen.
Seems the phone has stopped boot looping, it is on the initial setup screen. The screen remains pitch black but it responds to touch.
Not sure where I can go from here.
Edited:
The screen has come on briefly once for a few seconds, it is on the initial setup screen. I only had time to switch the language to English, then the screen went black and the device seem to have crashed (no longer makes sound or vibrate as I randomly tap on the screen)
k3vink3vin said:
Seems the phone has stopped boot looping, it is on the initial setup screen. The screen remains pitch black but it responds to touch.
Not sure where I can go from here.
Edited:
The screen has come on briefly once for a few seconds, it is on the initial setup screen. I only had time to switch the language to English, then the screen went black and the device seem to have crashed (no longer makes sound or vibrate as I randomly tap on the screen)
Click to expand...
Click to collapse
I think it's some faulty hardware at this point. You've tried everything possible as of now.
k3vink3vin said:
Seems the phone has stopped boot looping, it is on the initial setup screen. The screen remains pitch black but it responds to touch.
Not sure where I can go from here.
Edited:
The screen has come on briefly once for a few seconds, it is on the initial setup screen. I only had time to switch the language to English, then the screen went black and the device seem to have crashed (no longer makes sound or vibrate as I randomly tap on the screen)
Click to expand...
Click to collapse
Hi! I bought an LG V50 and exactly the same things you described happens to me, the screen starts, it shows the logo, but then it goes completely black, but phone starts, sounds are heard and the touch screen work. But not image, screen is black. Could you find out what hardware defect it is? It's the display module, or will it be the motherboard? Thanks
Nope, I have sold the phone as parts.
H
k3vink3vin said:
I managed to get the device to enter and stay in download mode, however the screen stays pitch black and I am not sure if I should continue flashing.
Would you go ahead and flash it if you were me?
The device is currently on Pie, I will probably try flashing a Pie KDZ first, before an Android 10 KDZ.
Click to expand...
Click to collapse
OW CAN YOU MANAGED TO SATY IN DOWNLOAD MINE ALSO HAVE SAME ISSUE DOWNLOAD MODE GONE AFTER 2 TO 3 SECONDS....PLEASE TELL ME HOW TO STAY...
AND YOUR PROBLEM SOLVED OR STILL
Dntx27 said:
Hi! I bought an LG V50 and exactly the same things you described happens to me, the screen starts, it shows the logo, but then it goes completely black, but phone starts, sounds are heard and the touch screen work. But not image, screen is black. Could you find out what hardware defect it is? It's the display module, or will it be the motherboard? Thanks
Click to expand...
Click to collapse
I got a samsung Note 10 doing this! Took it to local shop! he sprayed some liquid near the proximity sensor area and I saw my phones screen came back to life ;while hiding it he was Telling me if he can repair the screen without changing it he"ll need 20$.. I laughed and told him not interested to repair....