Database Info

Honor 8 back to stock and locked

Not sure what thread im looking for but .I'm looking to put my honor 8 back to stock . Toolkit method for this or any instructions in have the FRD -LO4 Honor 8
Sent from my FRD-L04 using XDA-Developers mobile app

If you have swapped out the recovery firmware, for example by installing TWRP, you may have to flash the phone with the original recovery image first: Extract the required "RECOVERY.img" from an original "UPDATE.APP" file using the Huawei Update Extractor and then flash it using fastboot:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot flash recovery RECOVERY.img
Reboot
Then, created a "dload" folder on your SD card and placed the original "UPDATE.APP" inside. Unplug USB (important!) and reboot while holding Vol+ & Vol-. This should install the original firmware from your SD card. You will lose all your data!
Finally, you can lock your bootloader:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot oem relock <YourPersonalUnlockCodeHere>
Reboot
This worked for me, but don't sue me if it does not for you!

I was actually able to go back to what seems to be stock and unlocked by going to the menu in Updater and telling it to download the full image. It seems to have wiped out my unlock, TWRP and root all in one swoop.

xor2000 said:
This worked for me, but don't sue me if it does not for you!
Click to expand...
Click to collapse
I believe I am also on FRD-AL04. Is there a difference between FRD-AL04 and FRD-L04? I got this information from this thread. This is the US version of the phone here, right? Do you happen to have the link for the stock recovery and stock rom for FRD-AL04 or whatever this is?
The only thing I could find is this link, B122 for US. Is this correct?
Please note, I haven't tested this and this was found during a google search. I wouldn't recommend using this. I am only providing it to see if we can use something like this.
http://www.stechguide.com/download-stock-firmware-for-honor-8/

xor2000 said:
If you have swapped out the recovery firmware, for example by installing TWRP, you may have to flash the phone with the original recovery image first: Extract the required "RECOVERY.img" from an original "UPDATE.APP" file using the Huawei Update Extractor and then flash it using fastboot:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot flash recovery RECOVERY.img
Reboot
Then, created a "dload" folder on your SD card and placed the original "UPDATE.APP" inside. Unplug USB (important!) and reboot while holding Vol+ & Vol-. This should install the original firmware from your SD card. You will lose all your data!
Finally, you can lock your bootloader:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot oem lock <YourPersonalUnlockCodeHere>
Reboot
This worked for me, but don't sue me if it does not for you!
Click to expand...
Click to collapse
Also, if you have root, you need to unroot first. After you install stock recovery and update your phone via (stock) recovery, it will re-lock your bootloader.

am not able to flash the stock ROM using volume + and - + power button , its showing software install failed "incompatibility with current version . please download the correct update " I am sure that i have downloaded the correct ROM for FR L09 i tried with different custom Rom . but no luck

sarathvenmony said:
am not able to flash the stock ROM using volume + and - + power button , its showing software install failed "incompatibility with current version . please download the correct update " I am sure that i have downloaded the correct ROM for FR L09 i tried with different custom Rom . but no luck
Click to expand...
Click to collapse
download it again, your download might have been currupted!

try to download it again from another source ,
if fail
do the following :
Make Sure u have bootloader unlocked
unzip
Extract the update.app use this attachment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
take
Boot , Recovery , Data , System .
Go to ur Fast-boot Folder move this Files inside it .
Open Terminal or CMD throw Admin Rights inside the folder
make sure ur device with fast-boot mode before connecting ur cable to ur device
and make sure u have drivers installed
Type in CMD
Fastboot flash Boot boot.img
Fastboot flash Recovery Recovery.img
Etc .. flash all .imgs
Last type fastboot oem lock <YourPersonalUnlockCodeHere> ( THIS ONLY IF U LIKE TO LOCK AGAIN !)
fastboot Reboot . unplug cable and hope Work Fine .
If worked Hit Thanks , And u Welcome !.

I think I have some weird problem too... I am on some strange N build (L09C900B300). I'm not able to restore firmware to M version, because my bootloader is unlocked again after I've tried to revert back to stock M (L09C432B131). I don't know if this is some kind of soft brick or what, cause I can't enable usb debugging in developer options! Please, help! I am desperate...
Don't have recovery anymore. Can enter fastboot, with bootloader: unlock and frp: unlock messages.

Harthouse said:
I think I have some weird problem too... I am on some strange N build (L09C900B300). I'm not able to restore firmware to M version, because my bootloader is unlocked again after I've tried to revert back to stock M (L09C432B131). I don't know if this is some kind of soft brick or what, cause I can't enable usb debugging in developer options! Please, help! I am desperate...
Don't have recovery anymore. Can enter fastboot, with bootloader: unlock and frp: unlock messages.
Click to expand...
Click to collapse
i had the same problem ,when i go to developer option wasn't able to turn on usb debugging , (might be driver issue)
i tried in an another PC and usb debugging was working fine

Update - Finally I did it!!! Reverted to stock FRD-L09C432B120 and then upgraded to FRD-L09C432B131, with dload folder on external sd card (power off phone/volume up & volume down + power button)...

Harthouse said:
Update - Finally I did it!!! Reverted to stock FRD-L09C432B120 and then upgraded to FRD-L09C432B131, with dload folder on external sd card (power off phone/volume up & volume down + power button)...
Click to expand...
Click to collapse
Nice U Got phone back updated , i like to see if OP have his issue fixed or not !. i got my attachments 12 times downloaded ! ..

Harthouse said:
Update - Finally I did it!!! Reverted to stock FRD-L09C432B120 and then upgraded to FRD-L09C432B131, with dload folder on external sd card (power off phone/volume up & volume down + power button)...
Click to expand...
Click to collapse
How you revert to stock? Please help me i'm desperate to revert to stock. I have an FRD-L04 an I have the same problem you have.. I'm in android 7.0 B360 I only unlock the bootloader and install twrp, but i had flashed the stock recovery via fastboot off an original update.app Android 6.0 EMUI 4.1 . I dcan't open the recovery but i can enter in fastboot .

Is there any way to do ?

hi guys i have I installed cm 13 and now I wanna go back to stock but with custom recovery, can I just flash the backups done after installing (read only mode) twrp?

ZicoRamirez77 said:
How you revert to stock? Please help me i'm desperate to revert to stock. I have an FRD-L04 an I have the same problem you have.. I'm in android 7.0 B360 I only unlock the bootloader and install twrp, but i had flashed the stock recovery via fastboot off an original update.app Android 6.0 EMUI 4.1 . I dcan't open the recovery but i can enter in fastboot .
Click to expand...
Click to collapse
First, download full stock firmware for your L04 (EMUI 4.1).
Once the file "update.zip" downloaded, then extract it and connect your Honor 8 to PC.
Now create a folder "dload" in the root of your SD card (If the "dload" folder not exists) and place the update.app file in that folder.
Once the file transferred then switch off your device.
Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
Now wait for few minutes to complete the process.
Good luck!!!

xor2000 said:
If you have swapped out the recovery firmware, for example by installing TWRP, you may have to flash the phone with the original recovery image first: Extract the required "RECOVERY.img" from an original "UPDATE.APP" file using the Huawei Update Extractor and then flash it using fastboot:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot flash recovery RECOVERY.img
Reboot
Then, created a "dload" folder on your SD card and placed the original "UPDATE.APP" inside. Unplug USB (important!) and reboot while holding Vol+ & Vol-. This should install the original firmware from your SD card. You will lose all your data!
Finally, you can lock your bootloader:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot oem lock
Reboot
This worked for me, but don't sue me if it does not for you!
Click to expand...
Click to collapse
Thank you for your answer. I want go back to stock rom but with root and twrp as custom recovery.
While I was installing twrp I saved the backup of the all partition and now I would like to restore all of them unless the recovery.
Theoretically what above is correct but I don't know of there is some hide problem.
Can you guys confirm?
Inviato dal mio HONOR-8 utilizzando Tapatalk

Harthouse said:
First, download full stock firmware for your L04 (EMUI 4.1).
Once the file "update.zip" downloaded, then extract it and connect your Honor 8 to PC.
Now create a folder "dload" in the root of your SD card (If the "dload" folder not exists) and place the update.app file in that folder.
Once the file transferred then switch off your device.
Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
Now wait for few minutes to complete the process.
Good luck!!!
Click to expand...
Click to collapse
I do exactly the same procedure and it tell me the software is not the correct, but i downloaded the correct version for my phone. Maybe if i do the rollback(70MB) first and after flash the full package of android 6(1.6GB) probably works?

valk791 said:
Thank you for your answer. I want go back to stock rom but with root and twrp as custom recovery.
While I was installing twrp I saved the backup of the all partition and now I would like to restore all of them unless the recovery.
Theoretically what above is correct but I don't know of there is some hide problem.
Can you guys confirm?
Inviato dal mio HONOR-8 utilizzando Tapatalk
Click to expand...
Click to collapse
Up please
Inviato dal mio HONOR-8 utilizzando Tapatalk

xor2000 said:
If you have swapped out the recovery firmware, for example by installing TWRP, you may have to flash the phone with the original recovery image first: Extract the required "RECOVERY.img" from an original "UPDATE.APP" file using the Huawei Update Extractor and then flash it using fastboot:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot flash recovery RECOVERY.img
Reboot
Then, created a "dload" folder on your SD card and placed the original "UPDATE.APP" inside. Unplug USB (important!) and reboot while holding Vol+ & Vol-. This should install the original firmware from your SD card. You will lose all your data!
Finally, you can lock your bootloader:
Enable developer mode and connect via USB
adb reboot bootloader
fastboot oem lock <YourPersonalUnlockCodeHere>
Reboot
This worked for me, but don't sue me if it does not for you!
Click to expand...
Click to collapse
This works for version FRD-L09C432B380. Just did and everything works but the last command is [*]fastboot oem relock <YourPersonalUnlockCodeHere> instead of lock
Regards

[TWRP]Lenovo K8 Plus - XT1902-2 - Marino [RECOVERY]

This is Ported TWRP Recovery from a same MT6757 chipset model​--------------------------------------------------------------------------------------------------------------------​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Your warranty is now void.:laugh:
I am not responsible for bricked devices, dead SD cards,thermonuclear war.
Please do some research before flashing it!
YOU are choosing to make these modifications.
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
How to Flash
- Download the Latest TWRP Recovery Image Attached.
- Flash it via fastboot cmd or via sp flash tool.
- If you want stock recovery then flash stock recovery image with SP tool.
- It is recommended to flash TWRP via FASTBOOT.
How to use SP flash tool
- Install Vcom media tek driver on your pc.
- Boot into meta mode.
- More detail and download available on SPFT
BUGS
Nothing with my device.
Tell me if you found.
DOWNLOAD
Latest TWRP here
Note: This recovery is Android Version sensitive which means it only supports Nougat(7.x) firmware not Oreo(8.x) or Pie (9.x). Flashing this on k8+ running Oreo may brick your device.
THANKS
@GEEKOFIA for porting & customizing.
Arisch for his K8 Plus
GOOGLE for everything.
XDA for publishing.
OFFICIAL COMMUNITY
Official Telegram Group
Official Telegram Channel
======== GEEKOFIA ========
VISIT​

Requirements
1. Your Bootloader must be unlocked.
2. This TWRP is strictly for k8+ running on only nougat firmware (Android 7.x).
3. Internal Storage will be wiped.
Bugs
1. Nothing
2. You tell me
Note: This recovery is Android Version sensitive which means it only supports Nougat(7.x) firmware not Oreo(8.x) or Pie (9.x). Flashing this on k8+ running Oreo may brick your device.
Instructions
1. Go to the fastboot mode.
2. Now paste the recovery in adb folder.
3. Open the cmd by holding shift and press right click in adb folder and then click open powershell window here.
4. Now to confirm that device is connected by typing :-
Code:
fastboot devices
If your device seriel no. appers then it is okay.
6. After that type:-
Code:
fastboot flash recovery twrp-recovery-name.img
7. Now unplug your device and then hold power button till it turns off and then hold volume (-) after that press power button to boot into bootloader then choose recovery mode.
Now you are in TWRP mode.
Note:- After flashing recovery you must have to wipe Internal Storage(format data > yes) to remove encryption. Also, you must have to flash magisk so that it will patch boot.img through which system will not be able to overwrite TWRP again.
Download
TWRP
MAGISK
Q&A
Q: What is the dycrept password?
A: Click on cancel after that format data to remove this permanetly.
Q: Is the Screen black after booting to twrp ?
A: Yes,it is on locked state by default,you have to press power button to unlock it.
OFFICIAL COMMUNITY
Official Telegram Group
Official Telegram Channel
======== GEEKOFIA ========
VISIT​

Pls guide
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery ( although bootloader is unlocked)?

akiitd94 said:
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery ( although bootloader is unlocked)?
Click to expand...
Click to collapse
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Code:
fastboot boot twrp-name.img
This will boot you to recovery mode (just wait couple seconds),the screen may be black if so,then press the power button and swipe to unlock the recovery screen. Now you have to flash the same twrp-recovery.img file into recovery partition.
If you don't flash twrp-recovery image during that live recovery session,you will not be able to reboot to twrp recovery again.
But if you don't want twrp recovery permanently,just need root access,then you can flash only magisk .zip during this live session and reboot your phone and install magisk manager apk and patch the stock boot image.By this process your phone will have root access without a TWRP recovery.

GEEKOFIA said:
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Code:
fastboot boot twrp-name.img
This will boot you to recovery mode (just wait couple seconds),the screen may be black if so,then press the power button and swipe to unlock the recovery screen. Now you have to flash the same twrp-recovery.img file into recovery partition.
If you don't flash twrp-recovery image during that live recovery session,you will not be able to reboot to twrp recovery again.
But if you don't want twrp recovery permanently,just need root access,then you can flash only magisk .zip during this live session and reboot your phone and install magisk manager apk and patch the stock boot image.By this process your phone will have root access without a TWRP recovery.
Click to expand...
Click to collapse
Thank you.
1. What did you mean by "Now you have to flash the same twrp-recovery.img file into recovery partition." Please give detailed steps of how to do that once I reach the twrp screen after flashing twrp. sorry but I am new to all this
2. I have now rooted my phone by flashing patched_boot.img from dhruv aggarwal's post. Now how do I install twrp without losing root? Please give detailed steps(like what command, recovery mode or not...). Can I just flash the twrp.img file you have provided in the post using flashify app?
sorry for troubling you.

akiitd94 said:
You need to boot your device (lenovo k8 plus) from this twrp. To do this type following code in cmd.
Thank you.
1. What did you mean by "Now you have to flash the same twrp-recovery.img file into recovery partition." Please give detailed steps of how to do that once I reach the twrp screen after flashing twrp. sorry but I am new to all this
2. I have now rooted my phone by flashing patched_boot.img from dhruv aggarwal's post. Now how do I install twrp without losing root? Please give detailed steps(like what command, recovery mode or not...). Can I just flash the twrp.img file you have provided in the post using flashify app?
sorry for troubling you.
Click to expand...
Click to collapse
If you have root access then install flashify apk and choose the twrp image you want to flash.

how root nokia 6 with unlocked bootloader

here we are
everything i make it with my nokia 6 t-1033 ple with official 1 march patch (oreo 8.0.0)
BACKUP need factory reset
1. unlock boot loader by @the_laser
2. dowload this recovery https://mega.nz/#F!K1k0gC5C!xpw3-AQvSQJ5p6VWX19gpA from @hikari_calyx
3. follow the instructions from https://forum.xda-developers.com/nokia-6/how-to/guide-how-to-flash-custom-recovery-root-t3702354 from 6 to 8. lines (inside "click to show content")
but in 8. line hold [Volume Up] and [Power] on your phone and RELEASE power.
4. now you are on twrp 3.2.1 for NOKIA 6 that support eng lang. MAKE only FACTORY RESET and reboot your system.
5.Download Magisk 16 from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 move it to internal or external card ,and reboot to recovery.
6. from twrp install magisk 16 zip -wipe cache-dalvik - reboot system
7. That is enjoy your rooted NOKIA 6
(for updates - upgrades OTA... etc... will see...)
maybe two issue
1. if some times don't recognize the sim card : boot to recovery wipe cache-davlik reboot to system
or boot normal try it two, three or more times
2. if camera don't start : use this one https://forum.xda-developers.com/nokia-6/themes/google-camera-hdr-portrait-selfie-t3733577
the best
THANKS @the_laser , @hikari_calyx , @xinkid

parageria said:
here we are
everything i make it with my nokia 6 t-1033 ple with official 1 march patch (oreo 8.0.0)
BACKUP need factory reset
1. unlock boot loader by @the_laser
2. dowload this recovery https://mega.nz/#F!K1k0gC5C!xpw3-AQvSQJ5p6VWX19gpA from @hikari_calyx
3. follow the instructions from https://forum.xda-developers.com/nokia-6/how-to/guide-how-to-flash-custom-recovery-root-t3702354 from 6 to 8. lines (inside "click to show content")
but in 8. line hold [Volume Up] and [Power] on your phone and RELEASE power.
4. now you are on twrp 3.2.1 for NOKIA 6 that support eng lang. MAKE only FACTORY RESET and reboot your system.
5.Download Magisk 16 from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 move it to internal or external card ,and reboot to recovery.
6. from twrp install magisk 16 zip -wipe cache-dalvik - reboot system
7. That is enjoy your rooted NOKIA 6
(for updates - upgrades OTA... etc... will see...)
THANKS @the_laser , @hikari_calyx , @xinkid
Click to expand...
Click to collapse
Does this work for ta1021 on 8.1 Oreo? Thanks.

ashimiyy said:
Does this work for ta1021 on 8.1 Oreo? Thanks.
Click to expand...
Click to collapse
on my nokia 6 ta-1033 oreo 8.0.0 work great
MUST work on ta-1021 oreo 8.1.0
follow instruction

In step 2 i always get confuse, wish file do i have to download
i have a nokia 6 ta1025 pleg android 8.1.0
parageria said:
here we are
everything i make it with my nokia 6 t-1033 ple with official 1 march patch (oreo 8.0.0)
BACKUP need factory reset
1. unlock boot loader by @the_laser
2. dowload this recovery https://mega.nz/#F!K1k0gC5C!xpw3-AQvSQJ5p6VWX19gpA from @hikari_calyx
3. follow the instructions from https://forum.xda-developers.com/nokia-6/how-to/guide-how-to-flash-custom-recovery-root-t3702354 from 6 to 8. lines (inside "click to show content")
but in 8. line hold [Volume Up] and [Power] on your phone and RELEASE power.
4. now you are on twrp 3.2.1 for NOKIA 6 that support eng lang. MAKE only FACTORY RESET and reboot your system.
5.Download Magisk 16 from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 move it to internal or external card ,and reboot to recovery.
6. from twrp install magisk 16 zip -wipe cache-dalvik - reboot system
7. That is enjoy your rooted NOKIA 6
(for updates - upgrades OTA... etc... will see...)
THANKS @the_laser , @hikari_calyx , @xinkid
Click to expand...
Click to collapse

SamuSZ said:
In step 2 i always get confuse, wish file do i have to download
i have a nokia 6 ta1025 pleg android 8.1.0
Click to expand...
Click to collapse
nokia-6-ta-1000-8_0-twrp3.2.1-7to-recovery-magisk-root-2018.3.15.img

Thanks it works.
I just have an issiue when i reboot to recovery after FACTORY RESET it shows no command i just flash recovery.img again and enter in recovery and install magisk.
Thanks to all!!
Pics:
drive.google.com/file/d/1L2pCoh0OV5tXQrzEuN7SEg6s91Q4XN11/view?usp=drivesdk
drive.google.com/file/d/1E6XyJ1m1cfsy4dVtn3CVoOnB2yUhuXAy/view?usp=drivesdk
Nokia 6
TA1025
PELG
Android 8.1.0

I am on 7.1.1 with root and custom recovery. I have to unroot to ipdate to oreo or just download update and hit install it will do everything automatically?

I got file from lazer he said that file based on android ple project , what is ple project how to flash it or what i can do ?

hemwahdan said:
I got file from lazer he said that file based on android ple project , what is ple project how to flash it or what i can do ?
Click to expand...
Click to collapse
there is instruction from -the laser to flash unlock bootloader
about ple is the first letters from serial number settings/about phone/status

parageria said:
there is instruction from -the laser to flash unlock bootloader
about ple is the first letters from serial number settings/about phone/status
Click to expand...
Click to collapse
He just said it based project ple
And i don't know any thing about that and how to flash it

hemwahdan said:
He just said it based project ple
And i don't know any thing about that and how to flash it
Click to expand...
Click to collapse
if you have an unlock bin like 12345687xxxxx.bin (PLE its codename from serial number dont need it to flash)
go there https://forum.xda-developers.com/nokia-6/how-to/guide-how-to-unlock-bootloader-qualcomm-t3769930

parageria said:
here we are
everything i make it with my nokia 6 t-1033 ple with official 1 march patch (oreo 8.0.0)
BACKUP need factory reset
1. unlock boot loader by @the_laser
2. dowload this recovery https://mega.nz/#F!K1k0gC5C!xpw3-AQvSQJ5p6VWX19gpA from @hikari_calyx
3. follow the instructions from https://forum.xda-developers.com/nokia-6/how-to/guide-how-to-flash-custom-recovery-root-t3702354 from 6 to 8. lines (inside "click to show content")
but in 8. line hold [Volume Up] and [Power] on your phone and RELEASE power.
4. now you are on twrp 3.2.1 for NOKIA 6 that support eng lang. MAKE only FACTORY RESET and reboot your system.
5.Download Magisk 16 from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 move it to internal or external card ,and reboot to recovery.
6. from twrp install magisk 16 zip -wipe cache-dalvik - reboot system
7. That is enjoy your rooted NOKIA 6
(for updates - upgrades OTA... etc... will see...)
THANKS @the_laser , @hikari_calyx , @xinkid
Click to expand...
Click to collapse
after root does not recognize the sim card

roperper said:
after root does not recognize the sim card
Click to expand...
Click to collapse
i have some time this problem
boot to recovery wipe cache-davlik reboot to system

parageria said:
i have some time this problem
boot to recovery wipe cache-davlik reboot to system
Click to expand...
Click to collapse
Please help me.
My nokia 6 after the recovery can not boot up. Now my phone can only go to fastboot mode and recovery but can not boot up. I tried flash rom about 7.1 but could not flash.

letgol said:
Please help me.
My nokia 6 after the recovery can not boot up. Now my phone can only go to fastboot mode and recovery but can not boot up. I tried flash rom about 7.1 but could not flash.
Click to expand...
Click to collapse
from recovery factory reset - reboot system
or from dowload mode reinstall your firmware
instructions on support threads

parageria said:
from recovery factory reset - reboot system
or from dowload mode reinstall your firmware
instructions on support threads
Click to expand...
Click to collapse
It always reboots into Download mode. But when the flash ROM with OST LA 6.0.4 or 6.1.1 can not be flashed.OST error Boot FTM mode fail.

letgol said:
It always reboots into Download mode. But when the flash ROM with OST LA 6.0.4 or 6.1.1 can not be flashed.OST error Boot FTM mode fail.
Click to expand...
Click to collapse
That is normal. You can flash a firmware in nb0 or mlf format or use fastboot.

ZeroPointMax said:
That is normal. You can flash a firmware in nb0 or mlf format or use fastboot.
Click to expand...
Click to collapse
+1 after "Boot FTM Mode Fail" prompts, you can click "Next" now

parageria said:
i have some time this problem
boot to recovery wipe cache-davlik reboot to system
Click to expand...
Click to collapse
it is also impossible to start the camera

parageria said:
+1 after "Boot FTM Mode Fail" prompts, you can click "Next" now
Click to expand...
Click to collapse
I did so but my phone still did not respond.
OST just stopped here and the phone did not respond
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[SOLVED] Mi A1 BOOTLOOP

THIS PROBLEM IS VERY ANNOYING!! (The reason is because i didn't backup EFS before i flash Custom ROM)
And I would like to share how to RESOLVE it.
**your phone must be Unlocked Bootloader. Search Google how to do it. (Quick tip: in Fastboot mode. Type "fastboot oem unlock")
1) Download Stock MIUI 9.6.8
2) Download TWRP_fastboot_only (This TWRP only run ONE TIME, to Restore EFS and Install Official TWRP 3.3.1). Unzip it, we need boot-recovery.img file
3) Download TWRP 3.3.1
4) Download EFS_TWRP for MIUI 9.6.8
5) Download and Install minimal_adb_fastboot_1.4.3
6) Run "Minimal ADB and Fastboot" in your Desktop. Type "fastboot boot " and drag boot-recovery.img file (in step 2) to Command Prompt window. It will complete your command, like this "fastboot boot "...\boot-recovery.img". Press Enter
7) When the TWRP start up, connect your phone to PC. Unzip file EFS_TWRP, and copy to folder TWRP in your phone.
8) Go to Restore in TWRP and choose Backup folder, restore *Boot* and *EFS* and swipe
9) Now flash Stock MIUI 9.6.8 (in step 1) and TWRP 3.3.1 (in step 3)
10) Everything is OK now! Congrats. :good:

Thanks
---------- Post added at 08:37 PM ---------- Previous post was at 08:19 PM ----------
a question only with that ROM or can I download the latest stock ROM

Dualitydark said:
a question only with that ROM or can I download the latest stock ROM
Click to expand...
Click to collapse
Only with that ROM bro, because the EFS file was backed up from that ROM

I just created this account to say thank you for this solution.
My MI A1 got bricked/in bootloop after the newest update.
I couldn't flash it via MiFlash with a simple stock ROM, I needed to unlock it via the unlocker app of that MIUI thing.
With flashing successfully after, I got the same old bootloop screen.
Then I ran through the steps up until 8.
After that, I rebooted, and the phone started up normally.
So in case people managed to flash their device and do your method, there's no need to flash it again and for TWRP 3.3.1 to solve bootloop issue.
At least for me it wasn't needed.
Once again, thank you very much!!! :good::good::good:

Fantastic. Thanks friend.

My phone just got in to boot loop when I tried to reboot from magisk app. I successfully flashed stock firmware from miflash tool but still stuck on boot loop.
(my phone is bootloader unlocked)

alkoka said:
I just created this account to say thank you for this solution.
My MI A1 got bricked/in bootloop after the newest update.
I couldn't flash it via MiFlash with a simple stock ROM, I needed to unlock it via the unlocker app of that MIUI thing.
With flashing successfully after, I got the same old bootloop screen.
Then I ran through the steps up until 8.
After that, I rebooted, and the phone started up normally.
So in case people managed to flash their device and do your method, there's no need to flash it again and for TWRP 3.3.1 to solve bootloop issue.
At least for me it wasn't needed.
Once again, thank you very much!!! :good::good::good:
Click to expand...
Click to collapse
Me too! Infact, I tried to flash pixel experience and phone was stuck in bootloop, thanks to this guide I was able to make phone working again!
You are a true hero, thank you so much!

it is showing waiting for device

Hi all,
Just sharing my experience. I own two Mi A1 phones (I just love this model and I thought I'd get a spare)
On my first Phone, I got involutarily upgraded to Pie and it wass hell to get it back. I followed a guide here and flashed someone else's EFS partition. That feels dirty to me so I decided to do things properly with my spare phone.
Here's what I did:
- Booted into the OS the phone shipped with (Nougat, good times!)
- Unlocked bootloader and booted into TWRP
- Did a FULL BACKUP. This is what I didn't do with my first one! It's CRUCIAL that you back up your phone first thing when you get it. Don't even connect to wifi, just unlock the bootloader and back it up with TWRP! IF you don't, you will NEVER be able to get back to how things truly were out of the factory. Of course you need to copy the backup to your PC for safe keeping.
- Now I went my merry way installing Lineage os, eventaully upgrading to Pixel Experience (Android 10, which turns out I hate).
- I wanted to get back to stock rom. So I booted into TWRP and did a full restore.
- Unfortunately, It boot looped.
- Flashed EFS and Boot again (from my backup). No luck, no effect.
- Flashed a stock Oreo image (V9.6.8.0.ODHMIFE) using Mi flash Tool and the "clean all and lock" option (I regretted doing this because I realized I wasn't sure if I'd be able to get fastboot again after oem lock, but it turned out fine)
- After flashing it, It was still boot looping! Panic.
- Tried booting into fastboot and succeeded (yay)
- Did a fastboot oem unlock and luckily The bootloader got unlocked no problem.
- Phone finally booted! Hooray.
Just putting this in writing for future reference in case anyone is wondering about the steps to take.

tunhan9x said:
THIS PROBLEM IS VERY ANNOYING!! (The reason is because i didn't backup EFS before i flash Custom ROM)
And I would like to share how to RESOLVE it.
**your phone must be Unlocked Bootloader. Search Google how to do it. (Quick tip: in Fastboot mode. Type "fastboot oem unlock")
1) Download Stock MIUI 9.6.8
2) Download TWRP_fastboot_only (This TWRP only run ONE TIME, to Restore EFS and Install Official TWRP 3.3.1). Unzip it, we need boot-recovery.img file
3) Download TWRP 3.3.1
4) Download EFS_TWRP for MIUI 9.6.8
5) Download and Install minimal_adb_fastboot_1.4.3
6) Run "Minimal ADB and Fastboot" in your Desktop. Type "fastboot boot " and drag boot-recovery.img file (in step 2) to Command Prompt window. It will complete your command, like this "fastboot boot "...\boot-recovery.img". Press Enter
7) When the TWRP start up, connect your phone to PC. Unzip file EFS_TWRP, and copy to folder TWRP in your phone.
8) Go to Restore in TWRP and choose Backup folder, restore *Boot* and *EFS* and swipe
9) Now flash Stock MIUI 9.6.8 (in step 1) and TWRP 3.3.1 (in step 3)
10) Everything is OK now! Congrats. :good:
Click to expand...
Click to collapse
OP, all the links are expired ....What do?

my tissot Bootloop android one logo restart
tissot my bootloop. until androidone logo restarts.
can't flash with stock rom.
I've tried flash with miflash.
both edl mode and testpoint flash are successful but still the same.
but I can install twrp and custom rom, no problem.
i just wanna go back to stockrom
if there are friends here who can provide a solution.
thank you
sorry bad english

Hello everyone.
I am asking for your help.
I tried to follow the procedure described step by step until the end.
But the device keeps rebooting in a loop.
It boots up correctly, I can perform a few steps of the initial configuration and then it reboots.
What else can I try to do?
I don't have backups of my device.
Thanks in advance.

surferstory81 said:
Hello everyone.
I am asking for your help.
I tried to follow the procedure described step by step until the end.
But the device keeps rebooting in a loop.
It boots up correctly, I can perform a few steps of the initial configuration and then it reboots.
What else can I try to do?
I don't have backups of my device.
Thanks in advance.
Click to expand...
Click to collapse
[FASTBOOT][OTA] Xiaomi Mi A1 OTA & FASTBOOT Images
I just find and collect all available OTA and Fastboot links for Xiaomi Mi A1 How to extract OTA link: https://forum.xda-developers.com/showpost.php?p=74828109&postcount=2 Tool to unpack OTA images...
forum.xda-developers.com

GOD BLESS YOU

tunhan9x said:
THIS PROBLEM IS VERY ANNOYING!! (The reason is because i didn't backup EFS before i flash Custom ROM)
And I would like to share how to RESOLVE it.
**your phone must be Unlocked Bootloader. Search Google how to do it. (Quick tip: in Fastboot mode. Type "fastboot oem unlock")
1) Download Stock MIUI 9.6.8
2) Download TWRP_fastboot_only (This TWRP only run ONE TIME, to Restore EFS and Install Official TWRP 3.3.1). Unzip it, we need boot-recovery.img file
3) Download TWRP 3.3.1
4) Download EFS_TWRP for MIUI 9.6.8
5) Download and Install minimal_adb_fastboot_1.4.3
6) Run "Minimal ADB and Fastboot" in your Desktop. Type "fastboot boot " and drag boot-recovery.img file (in step 2) to Command Prompt window. It will complete your command, like this "fastboot boot "...\boot-recovery.img". Press Enter
7) When the TWRP start up, connect your phone to PC. Unzip file EFS_TWRP, and copy to folder TWRP in your phone.
8) Go to Restore in TWRP and choose Backup folder, restore *Boot* and *EFS* and swipe
9) Now flash Stock MIUI 9.6.8 (in step 1) and TWRP 3.3.1 (in step 3)
10) Everything is OK now! Congrats. :good:
Click to expand...
Click to collapse
Sorry but I have a question
I didn't take a backup from my twrp and now I can't do anything
I just wanna ask that rom you uploaded here is custom rom? I mean I should install it with TWRP or I have to install this rom with mi Falsh tool ?
And what do you mean to flash TWRP ?
We didn't do that at first ?
I'm confused

Hey bro i really breaked my phone
I forgot to flash twrp at the end and my phone only vibrate after flashing
Plz help me

you're my hero man...
solved my problem so far...
now i can flash custom rom again....

tunhan9x said:
THIS PROBLEM IS VERY ANNOYING!! (The reason is because i didn't backup EFS before i flash Custom ROM)
And I would like to share how to RESOLVE it.
**your phone must be Unlocked Bootloader. Search Google how to do it. (Quick tip: in Fastboot mode. Type "fastboot oem unlock")
1) Download Stock MIUI 9.6.8
2) Download TWRP_fastboot_only (This TWRP only run ONE TIME, to Restore EFS and Install Official TWRP 3.3.1). Unzip it, we need boot-recovery.img file
3) Download TWRP 3.3.1
4) Download EFS_TWRP for MIUI 9.6.8
5) Download and Install minimal_adb_fastboot_1.4.3
6) Run "Minimal ADB and Fastboot" in your Desktop. Type "fastboot boot " and drag boot-recovery.img file (in step 2) to Command Prompt window. It will complete your command, like this "fastboot boot "...\boot-recovery.img". Press Enter
7) When the TWRP start up, connect your phone to PC. Unzip file EFS_TWRP, and copy to folder TWRP in your phone.
8) Go to Restore in TWRP and choose Backup folder, restore *Boot* and *EFS* and swipe
9) Now flash Stock MIUI 9.6.8 (in step 1) and TWRP 3.3.1 (in step 3)
10) Everything is OK now! Congrats. :good:
Click to expand...
Click to collapse
Kindly explain process 9 in details. I don't know how to flash.

Get this error.
My phone is stuck in bootloop and cannot unlock bootloader.
Anyone have a solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have flash stock from via Testpoint but when I boot into TWRP my touch screen is reversed. How can I fix it?

TWRP wont allow file transfer in USB via pc

NEED HELP
1. I wiped my system .. no system to load into
2. MIFLASH giving antirollback check error for all Fastboot roms
3. TWRP wont allow me to flash roms and there are no roms copied in the phone. getting error while copying files to the phone via TWRP
any solution ..
other than removing antirollback check in the roms .. ?

1. Is your bootlader CURRENTLY unlocked?
2. Which TWRP did you use?
3. Did you format all data using TWRP (enter yes to confirm) AND reboot TWRP before trying to copy rom to phone?
Sent from my Mi 10 Pro using Tapatalk

ted presley said:
1. Is your bootlader CURRENTLY unlocked?
2. Which TWRP did you use?
3. Did you format all data using TWRP (enter yes to confirm) AND reboot TWRP before trying to copy rom to phone?
Sent from my Mi 10 Pro using Tapatalk
Click to expand...
Click to collapse
bootload is unlocked
I figured it out loaded mi recovery wiped data and entered the system ..
I want to go to flash eu rom
do i dirty flash or do i clean flash the rom
stuck up on that part
TED can u help plz ..
I have used twrp-cmi-3.3.1-1
twrp-umi-3.3.1-2
what twrp are u using and i havent installed twrp
i am just booting TWRP
could you please tell me steps to 20.4.27

It seems you still on stock mi flash recovery, if your bootloader currently still unlocked.
You have to:
1. Go to fastboot
2. Flash TWRP again
3. Without restaring the device, reboot TWRP by using button combination: power off the device, press and hold volume down button until you see twrp screen
4. Format all data using twrp (option enter yes to confirm)
5. Reboot recovery using option reboot in TWRP recovery
6. Plug in pc to copy rom and flash.
Sent from my Mi 10 Pro using Tapatalk

ted presley said:
It seems you still on stock mi flash recovery, if your bootloader currently still unlocked.
You have to:
1. Go to fastboot
2. Flash TWRP again
3. Without restaring the device, reboot TWRP by using button combination: power off the device, press and hold volume down button until you see twrp screen
4. Format all data using twrp (option enter yes to confirm)
5. Reboot recovery using option reboot in TWRP recovery
6. Plug in pc to copy rom and flash.
Sent from my Mi 10 Pro using Tapatalk
Click to expand...
Click to collapse
twrp gives error saying
failed to mount /system_root permission denied
failed to mount /vendor permission denied
is it necessary the twrp should be installed
is it possible to just boot twrp while loading zips ..
thanks

sanish4u said:
twrp gives error saying
failed to mount /system_root permission denied
failed to mount /vendor permission denied
is it necessary the twrp should be installed
is it possible to just boot twrp while loading zips ..
thanks
Click to expand...
Click to collapse
problems just increasing now ..
the phone wont boot to twrp it will just go to fastboot
twrp wont load through volume down and power button

Seems like you lost TWRP
Reinstall twrp
Code:
Fastboot flash recovery twrp.img (use your filename)
Fastboot reboot recovery
Then when your in click the top right icon which says wipe. Here click on the right button I forget what it says I think it says wipe data. Next screen will ask you to type out the word "yes" you have to do this. You will lose all your data on the phone.
Now provided you have the drivers correctly installed you should see your phone as accessible from your computer. Paste your rom into the drive from your computer to the phone drive.
Once completed, go back to your phone you should be on the main menu click on top right it should say install. I believe you'll be in root directory you have to navigate to sdcard. Look for sdcard folder.
You should see the Rom you copied over, install it. It should take 5 to 10 minutes. Once complete reboot to system. First but will take some time maybe 5 to 10 minutes let it do it's thing.
Your done. If you want magisk, there are lots of guides here to do that as well

IronSingh said:
Seems like you lost TWRP
Reinstall twrp
Code:
Fastboot flash recovery twrp.img (use your filename)
Fastboot reboot recovery
Then when your in click the top right icon which says wipe. Here click on the right button I forget what it says I think it says wipe data. Next screen will ask you to type out the word "yes" you have to do this. You will lose all your data on the phone.
Now provided you have the drivers correctly installed you should see your phone as accessible from your computer. Paste your rom into the drive from your computer to the phone drive.
Once completed, go back to your phone you should be on the main menu click on top right it should say install. I believe you'll be in root directory you have to navigate to sdcard. Look for sdcard folder.
You should see the Rom you copied over, install it. It should take 5 to 10 minutes. Once complete reboot to system. First but will take some time maybe 5 to 10 minutes let it do it's thing.
Your done. If you want magisk, there are lots of guides here to do that as well
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It just wont let me wipe data says permission denied image attached
and wont let me copy rom as it is connected it MTP mode

sanish4u said:
It just wont let me wipe data says permission denied image attached
and wont let me copy rom as it is connected it MTP mode
Click to expand...
Click to collapse
Mtp is ok no issues. Photo is broken can't see what you posted. Try wipe on the left button. Don't wipe system. Did you have a pin code setup for your phone to get in the phone are you entering this pin code when twrp starts? You should enter this pin/password

IronSingh said:
Mtp is ok no issues. Photo is broken can't see what you posted. Try wipe on the left button. Don't wipe system. Did you have a pin code setup for your phone to get in the phone are you entering this pin code when twrp starts? You should enter this pin/password
Click to expand...
Click to collapse
It wont boot twrp or install twrp ..
twrp wont load whatsoever now ..
my only option is only mflash tool ..
is there any Fastboot rom which wont cause anti rollback error check
If anyone finds any solution will be greatly appreciated ..
Thanks

I'm doubt that you have unlocked Bootloader, that's really a big problem here...
If your bootloader is unlocked, our mentioned steps should work fine.
Did you really unlock bootloader? And didn't locked it again accidentally while using miflash?
Sent from my Mi 10 Pro using Tapatalk

The way you describe your problem it seems you had twrp and you booted into it.
Can you tell me what happens when you run
Fastboot flash recovery twrp.img (use your filename)

IronSingh said:
The way you describe your problem it seems you had twrp and you booted into it.
Can you tell me what happens when you run
Fastboot flash recovery twrp.img (use your filename)
Click to expand...
Click to collapse
1. I have bootloader unlocked via miunlock
2. I had booted into TWRP .. it failed to wipe data many times..
3. I installed TWRP and now it does not allow me to do anything ..
4. Wont go to TWRP wont go to Mi recovery and will just go to fastboot
5. MiFlash wont flash as it has anti rollback check error tried all fastboot roms EU and CN
6. Trying to recover it via MIUI recovery loader but it wont download from servers either ..
<img src="https://i.ibb.co/KNjRdNL/twrp.jpg" alt="twrp" border="0">
https://ibb.co/KNjRdNL this was the error message while wiping data

sanish4u said:
1. I have bootloader unlocked via miunlock
2. I had booted into TWRP .. it failed to wipe data many times..
3. I installed TWRP and now it does not allow me to do anything ..
4. Wont go to TWRP wont go to Mi recovery and will just go to fastboot
5. MiFlash wont flash as it has anti rollback check error tried all fastboot roms EU and CN
6. Trying to recover it via MIUI recovery loader but it wont download from servers either ..
https://ibb.co/KNjRdNL this was the error message while wiping data
Click to expand...
Click to collapse
Try another TWRP
Sent from my Mi 10 Pro using Tapatalk

ted presley said:
Try another TWRP
https://1drv.ms/u/s!Amo9DwwPZk-vg9gNxQ-IcpcHDWTI7A
Sent from my Mi 10 Pro using Tapatalk
Click to expand...
Click to collapse
Thanks ted it did solve the problem
thanks for all the support

ted presley said:
Try another TWRP
Sent from my Mi 10 Pro using Tapatalk
Click to expand...
Click to collapse
I installed miui 12 with the twrp provided. it booted into the system.
I want to install gapps so it try to go back to twrp by using vloume down and power the phone goes to fastboot.
Volume up and power will load xiaomi recovery v3.0
Volume up and down with power will load MIUI rom recovery
What is going wrong why am i not able to load TWRP now ..

sanish4u said:
I installed miui 12 with the twrp provided. it booted into the system.
I want to install gapps so it try to go back to twrp by using vloume down and power the phone goes to fastboot.
Volume up and power will load xiaomi recovery v3.0
Volume up and down with power will load MIUI rom recovery
What is going wrong why am i not able to load TWRP now ..
Click to expand...
Click to collapse
Unless you use custom MIUI rom, stock MIUI always overwrite TWRP.
BTW, if you flash official China Dev rom, no need to flash GAPPs, just install additional play store apk (plus additional latest play service framework if needed) from apkmirror, all other necessary things installed by Xiaomi already.
Sent from my Mi 10 Pro using Tapatalk

ted presley said:
Try another TWRP
Sent from my Mi 10 Pro using Tapatalk
Click to expand...
Click to collapse
thank you brother <3