Wireless charging - Galaxy S6 Q&A, Help & Troubleshooting

When using a wireless charger does the device need to be taken off the 'pad' once fully charged?
Seem to think I've read you should?

It depends on what Wireless Charger you use, all Samsung original and new some Models switch to trickle charge after the Phone is on 100%.
I use the EasyChee T900 v2 and have no problems, I put the Phone on it over night and down in the Morning.

When wireless charging with the original Samsung loader over night the device is pretty hot in the morning and the LED color didn't change. When charging with normal charger the device is cold. So I guess it has to be taken off at 100 % to end the loading process.
The whole wireless charger is simply useless.
Gesendet von meinem SM-G920F mit Tapatalk

Related

[Q] About to get my N5, some questions...

So, I'm getting my N5 on Tuesday for my birthday, and I'm just wondering some things...
The first thing, wireless charging - how well does it work? Can I just walk into a room and put the phone down onto the charger and it instantly starts charging as well as it would on AC?
That's another thing - how well does wireless charging work compared to AC charging? All the phones I've had, it if thinks it's USB charging, then it doesn't actually charge (the battery level goes down).
The major question - do any cheaper wireless chargers work? The one on Google Play A. isn't available, and B. costs loads...
Thanks,
Liam
Wireless charging takes more electricity but charges the phone at the same rate as a wired connection. And yes instant charging. Drop it on the pad and forget about it.
Find one with 1A. That'll charge it normally. Any higher is fine. The NX5 takes what it needs.
Don't buy any that's .03A, you'll be waiting for a while for it to charge.
Sent from my Nexus 5 using Tapatalk

Help! Phone powers off when discharging to 68%

I've noticed recently that when my phone is unplugged it powers off when reaching 68%. After that I get a screen saying that my battery level is too low and that I should charge it for a while before turning it on again.
When connecting the charger it starts to charge from about where it died.
I've tried to calibrate my battery using https://play.google.com/store/apps/details?id=com.nema.batterycalibration but it doesn't help.
Any ideas?
I'd try to let the battery drain till the phone powers off, then plug it to the charger and let it charge (still powered off) for about 90-120 minutes. then turn it on and check again. (Stock charger!)
if the error still persists, you may got a defective battery. in that case i'd file a RMA at oneplus.net
Gesendet von meinem 1+ One
Aavion said:
I'd try to let the battery drain till the phone powers off, then plug it to the charger and let it charge (still powered off) for about 90-120 minutes. then turn it on and check again. (Stock charger!)
Click to expand...
Click to collapse
This seems to be working! At least yesterday it discharged to around 40% before I started charging again.
Can anyone explain the mechanics in this? Previously I hadn't bothered unpack the stock charger as I had a charger already lying around. After reading this post I examined the old and the OnePlus charger and the old one only provided 1A where as the OnePlus one provides 2A.
Why does it matter which charger I use?
I mean I charge it in my car when driving home and the car charger definitely doesn't give me 2 amps. I would think that I would be able to charge it from any charger. I realize that using a smaller charger would take longer to recharge but nothing else...

Charger

What model charger does your z5 came with? Mine is a UCH10 is that a quick charger? If so is there a way to turn off quick charge while charging?
I've got a UCH20 which has got an output of 1500mA at 5V. Btw I'm living in Germany so different sockets over here. Maybe that's why I have another model than you.
Haven't seen any settings regarding quick charge. Why would you like to turn it off?
Gesendet von meinem E6653 mit Tapatalk
I just thought if quick charge always on during charging would affect the battery lifespan
On my charger output 5.0V-1800mA, 9.0V-1700mA, 12.0V-1275mA, my z5 is a Canada bell e6653
Sent from my E6653 using Tapatalk
I received the UCH20 with my UK Z5, which lead me to buy the Aukey quick charge charger.
As far as I'm aware, once the battery hits 100% charge, the phone runs via the power source it is connected to and not the battery.
I got the uch20 too not fast charge grrrr its poor of Sony to do this when your paying a premium

Do you keep the battery mod on all the time?

I'm thinking out of picking up the Incipio battery mod. I normally plug in with about 30% left but after my research on prolonging battery life, I'm realizing the battery mod might actually extend the life of the Z Force battery.
Any ways, the point/question is: do you leave the mod always attached and charge it at night (or when you need to)? Or do you only attach the mod when your battery hits a certain percentage?
So far I only lose about 20% during a day. I know that's not much but I'm connected to a 4g network extender so I don't search for a signal.
To answer your question the first day I had the battery mod I set it in efficiency mode and just slapped it on. That sets the mod battery to kick in when the phi e battery hits 80%. It worked like a charm. At the end of the day my mod was at 70%.
I only used it the first day and since then it's just been sitting there charged. But I try to not let my battery fall below 70-80%.
Sent from my XT1254 using XDA Free mobile app
I leave my tumi battery mod connected all of the time.
Sent from my XT1650 using Tapatalk
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
For the record, the Tumi, Kate Spade, and Incipio should all behave identically...as they are all made by Incipio...the only differences between the 3 are looks...and price
Sent from my XT1650 using Tapatalk
edneum2 said:
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
This.
I want to be able to use my phone as it was meant to be used without thinking about battery life later in the day.
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
The wireless charging capable Tumi mod only charges via wireless. It will NOT charge through the phone.
Obviously when wireless charging it will charge both the mod and phone. When wired charging it only does the phone and not the mod.
However the non-wireless one does charge the mod when charging via wire (I tested it).
Sent from my XT1650 using Tapatalk
JasonJoel said:
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
Click to expand...
Click to collapse
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
HotShotAzn said:
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
Click to expand...
Click to collapse
Not true, I have the Tumi wireless mod: wired & wireless both charge mod & phone.
I have two of both models of Tumi in front of me, and I am 100% sure neither of the wireless models will charge through the phone when it is connected via USB. Not sure why yours is different...
To be clear both of the non-wireless models I have DO charge through the phone when connected via USB...
Sent from my XT1650 using Tapatalk
I have the incipio wireless charging battery pack, can confirm it does charge when the phone is connected with usb.
I wonder if it matters if the mod is in 'efficiency mode' or not... I didn't think so from previous testing, but I'll check that tomorrow.
Edit: I have been using another usb-c cable/charger, not the 'turbo 30' one that came with the phone... That may be the difference. I'll test tomorrow.
Sent from my XT1650 using Tapatalk
So I'll have to apologize. I charged one of the phones with the usb charger that came with the phone, and it DID charge both the phone and mod.
So I must have something else going on with my setup at work, as it definitely does NOT there (even after being plugged in for hours) ...
Sorry for the confusion, and misinformation!
Sent from my XT1650 using Tapatalk
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
I bought my wife the Kate Spade battery pack and it officially died as a result of using a Droid Turbo 1 charger for her nightly charge. The first week or two, it charged just fine throughout the night. Now, however, it won't charge, even on the stock charger (although it will sometimes glitch out and say there is a 97% charge while still not supplying juice to the phone).
I have the Tumi with wireless charging, and I definitely prefer being able to charge it without the phone attached. As for my wife's, Big Red said that they offer a 1 year warranty on accessories, so I'll be able to take the dead one in for an exchange.
Word to the wise: use the stock charger whenever charging your phone with a non-wireless charging model of the battery packs attached. Wireless charging seems to work just fine, every night.
Sent from my XT1650 using Tapatalk
Ace2cool said:
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
Click to expand...
Click to collapse
Actually I get my battery mod to charge using the Verizon branded usb c fast charger. I made sure it worked in a store before I bought it. It does pop up saying turbo charging also. It is not as fast as the Motorola charger. I use Ampere to test them. The Verizon charger is about 2200 and the Motorola one is about 5700. But that and the supplied charger are the only ones that will work to charge the mod. I got screen shots somewhere. I'll try to post them.
Sent from my XT1254 using XDA Free mobile app
The screen shot with the white background shows the supplied Motorola charger.
The screen shot with the white background is the Verizon branded USB C fast charger.
Hope this helps. I've tried using about 15 different chargers and these were the only 2 that would charge the battery mod. That's not to say there's not other ones out there that will do it. Just sharing what I've found.
Sent from my XT1650 using XDA Free mobile app
I had the Tumi wireless battery mod. Changed it to the Incipio wireless battery mod. heres what I have found. Both will charge wireless. They will not however charge using any chargers, while connected to phone, without using the supplied charger or the verizon branded usb c fast charger. Both just sit there with any other charger saying waiting to charge.
I spent more time than ill admit to speaking to verizon tech support, motorola tech support, tumi tech support and incipio tech support verifying this.
Yes any charger will charge the phone. but it needed to turbo charge to be able to switch to charging the battery mod. Ive tried about 10 different chargers to test this. QC 2.0 chargers from the turbo chargers wont charge the battery mods.
I use a generic QC 2.0 charger at home, work, and in the car. All three charge the Tumi mod and the phone. Also use a wireless charger plugged into my computer which charges both. I don't think I've even unwrapped the charger that came with the phone.
It is strange how some chargers work and some don't. I have 5 usb-c chargers, 2 work and 3 don't.
Sent from my XT1650 using Tapatalk

Huawei Fast Charger is slow as heck

I have imported my Huawei and I absolutely love the phone. Since it is an import it came with a UK Type fast charger. I simply used a wall adapter and powered it over the US current. Well, that fast charger isn't working what so ever - after 2 hours I only go to about 35 percent from 0. I have used my Note 7 charger to charge it, and there the charging times are much faster. Any ideas on what, if anything, I am doing wrong and maybe where I can buy a working Huawei charger. I can't return the charger since I bought the phone over Amazon and it strictly came with no warranty. It is not the end of the world if I can't use the included charger I just want to see how fast this phone truly charges.
Either this post is a joke or someone sold you a non supercharge Huawei charger. Also are you using both the charger and charging cable that came with the phone in the box. It's white with purple in the USB A area
Here from 10 to 80% in 45 minutes
Same here. I find the first 80% to be lightning quick and then it slows to a "normal" charging speed for the last 20%.
Must be something wrong with your charger or cable.
Sent from my MHA-L29 using Tapatalk
Using the european adapter, not the UK one, but charging is lightning fast for me as well.
hi
the orginal adapter and cable
i charge from 0% to 90% in about 55 minutes, the last 10 % are slower maybe 30 minutes to full
greetz benji
Mine took almost 2 hours from 48% to 100%. I'm using Original Huawei charger.......
Install ampere and see what the milliamp charge rate shows as. When the battery is almost dead it should charge at just under 5 amps and will slowly decrease as the battery level increases.
Mine typically goes from 0 to 65% in half an hour, then 90% around half an hour on top of this. The final 10% takes almost another hour.
Sent from my MHA-L29 using Tapatalk
sinkoo1979 said:
Mine took almost 2 hours from 48% to 100%. I'm using Original Huawei charger.......
Click to expand...
Click to collapse
Well there is obviously something wrong with your charger, cable or phone. I would guess the first two.
Mine turbocharges in a few minutes. I've been using fir about a year now.
Could be that an "European" charger intended for 220 volts does not provide rapid charge when plugged into a 110 volts wall plug. I have for example an electric toothbrush I bought here in Europe and it refuses to charge on a 110 volt system when using an adapter. Maybe see if you can buy an OEM charger intended for the US?
There are 2 different chargers that are official, there's the supercharge one that comes bundled with the phone which I guess everyone is using and is getting great charging speeds... (Gotta use both the charger and the cable)
And then there's the fast charger which is pretty slow compared to the bundled charger.
The next time you wanna travel abroad make sure you buy a supercharger for that regions type of socket.
Sent from my MHA-L29 using Tapatalk
If you buy a replacement make sure it actually says SuperCharge on it.
Sent from my MHA-L29 using Tapatalk

Categories

Resources