Related
i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them
The phone doesn't have volume buttons so I decided to root it with Towelroot and install a 4 way reboot for recovery . Now every time I try to boot it starts with recovery booting in blue then secure fail: kernel system software not authorized by Verizon Wireless... . The phone is in 4.4.2 and can't go into adb or Odin as I can't get it in download mode. Is there a fix for this or am I completely screwed ?
xTheLover said:
The phone doesn't have volume buttons so I decided to root it with Towelroot and install a 4 way reboot for recovery . Now every time I try to boot it starts with recovery booting in blue then secure fail: kernel system software not authorized by Verizon Wireless... . The phone is in 4.4.2 and can't go into adb or Odin as I can't get it in download mode. Is there a fix for this or am I completely screwed ?
Click to expand...
Click to collapse
I also face the same problem when i install TWRP 2.8.7.0 using Flashify.
With the phone powered off, press simultaneously volume down, home and power button to get into download mode. On the screen offering option to Volume Up to continue and Volume Down to cancel, press Volume Down and the phone will restart and you can use it.
The link to this forum is given below:
http://forums.androidcentral.com/ve...my-phone-hard-bricked-no-chance-recovery.html
can't get into download mode as volume buttons are broken, is there a way to boot into download mode without volume buttons on the error screen?
xTheLover said:
can't get into download mode as volume buttons are broken, is there a way to boot into download mode without volume buttons on the error screen?
Click to expand...
Click to collapse
If you are familiar with adb, and you have it installed on your computer, you can use it to boot into download mode with this command:
Code:
adb reboot download
For more information check here: http://forum.xda-developers.com/showthread.php?t=872128
Thanks for the replies but my S3 doesn't show up when I type adb devices and Odin doesn't recognize the phone as well. I have the Samsung drivers and have USB debugging checked before all. How can I get my PC to see my s3?
xTheLover said:
Thanks for the replies but my S3 doesn't show up when I type adb devices and Odin doesn't recognize the phone as well. I have the Samsung drivers and have USB debugging checked before all. How can I get my PC to see my s3?
Click to expand...
Click to collapse
While your phone is connected to the PC check Device Manager and see if there are error icons ( yellow triangle with ! ) relating to your device. I won't be able to help much with that, I haven't used Windows in almost a decade.
I have managed to get the PCeU Ransomware onto my Tab and now when I turn it on i immediately get the splash page asking me to pay up.
No matter what i do to try to get into Safemode or Recovery Mode it is no good I simply get the splash page up which prevents me getting any further in my attempts to remove it.
Any suggestions would be gratefully appreciated.
I forgot to add that the usual method of getting into recovery is as far as I know the power button and volume up after turning the device off first (I have tried up and down volume as well)....i feel however that the device never completely turns off as when I hit the turn off option on the lock screen it shuts down but i dont feel the vibration that i used to get when it did this.
Trasnadunta said:
I have managed to get the PCeU Ransomware onto my Tab and now when I turn it on i immediately get the splash page asking me to pay up.
No matter what i do to try to get into Safemode or Recovery Mode it is no good I simply get the splash page up which prevents me getting any further in my attempts to remove it.
Any suggestions would be gratefully appreciated.
I forgot to add that the usual method of getting into recovery is as far as I know the power button and volume up after turning the device off first (I have tried up and down volume as well)....i feel however that the device never completely turns off as when I hit the turn off option on the lock screen it shuts down but i dont feel the vibration that i used to get when it did this.
Click to expand...
Click to collapse
Try to force reboot recovery by using "adb reboot recovery" and wipe data and cache from here. If you want you can save data from TWRP
Greets
If you can get to download mode and reflash stock rom, it might work!
Cant get to download mode unfortunately. Is there any idiots guides for instructions for "adb reboot recovery"?
Scratch the above.. I found the above and was able to run the command prompt but the device does not appear to be found and when any command is run i get error: device '(null)' not found.
I can see the files on the device in Windows explorer however so would have assumed the drivers when correct.
I suspec the issue is that I cant get into usb debug because i cant get past the blasted ransomware splash screen.
Trasnadunta said:
Cant get to download mode unfortunately. Is there any idiots guides for instructions for "adb reboot recovery"?
Scratch the above.. I found the above and was able to run the command prompt but the device does not appear to be found and when any command is run i get error: device '(null)' not found.
I can see the files on the device in Windows explorer however so would have assumed the drivers when correct.
I suspec the issue is that I cant get into usb debug because i cant get past the blasted ransomware splash screen.
Click to expand...
Click to collapse
Hard boot into recovery and then factory reset. Vol Up + Power until screen pops up then keep holding just volume up.
Hello, I recently came on a pixel phone to build and use lineageOS on. Upon rebuilding, I believe I performed adb sync wrong the device and damaged system. After that, my adb keys became unauthorized and I am unable to access the bootloader menu(I press power and volume, but phone boots into Bootloop). I tried the steps to get to bootloader menu, but the phone doesn't power completely off, and when I press the power button it gives me the launch screen saying press power to pause/continue boot, not allowing me to go into bootloader
My bootloop goes like this: Bootloader integrity screen(bootloader unlocked, cannot be verified) --> Google loading screen --> Android recovery. This shows 2 options with the message, "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device". The two options are to try again or data reset.
I press try again, and the same bootloop ensues, sometimes getting to lineage loading logo, but then back to the same recovery error regardless. If I press the buttons(power and vol up), to go into recovery, it just shows an android with a warning sign above it, giving a message saying "Error!" on the bottom. My adb on the computer shows as unauthorized, so I don't know how I can fix this. Google has said the warranty is expired and cannot do anything to help. Ideas to fix? Thanks for help in advance!
Use power and volume down (not up) to go into Fastboot mode. Then flash the stock images
NZedPred said:
Use power and volume down (not up) to go into Fastboot mode. Then flash the stock images
Click to expand...
Click to collapse
I tried that, but whenever I press any button, the phone is never turning completely off unless it dies. Even after that, it goes to the screen showing the secure boot integrity(Press power to continue/stop boot)
How can I completely shut off the device and restart it? And if system is messed up, will that leave my bootloader intact(I'm assuming so as boot is a different partition?)
mycalculations said:
I tried that, but whenever I press any button, the phone is never turning completely off unless it dies. Even after that, it goes to the screen showing the secure boot integrity(Press power to continue/stop boot)
How can I completely **** off the device and restart it? And if system is messed up, will that leave my bootloader intact(I'm assuming so as boot is a different partition?)
Click to expand...
Click to collapse
Does holding down the power button for 5-10 seconds turn it off? Or if you do that does it appear to turn off and then restart?
If that fails to turn it off, try just holding power and volume down for 5 seconds, and if the screen flashes (goes off and then on) let go of the power button but keep holding volume down and hopefully it goes into Fastboot.
That should work unless you have a dodgy power or volume button. The bootloader is completely separate to the boot partition, and the fact that it's doing anything at all suggests that it's still functioning.
Only other option I can think of is trying ADB commands when it's in recovery mode, e.g. adb reboot bootloader. However, if you have the stock recovery, that may not work.
NZedPred said:
Does holding down the power button for 5-10 seconds turn it off? Or if you do that does it appear to turn off and then restart?
If that fails to turn it off, try just holding power and volume down for 5 seconds, and if the screen flashes (goes off and then on) let go of the power button but keep holding volume down and hopefully it goes into Fastboot.
That should work unless you have a dodgy power or volume button. The bootloader is completely separate to the boot partition, and the fact that it's doing anything at all suggests that it's still functioning.
Only other option I can think of is trying ADB commands when it's in recovery mode, e.g. adb reboot bootloader. However, if you have the stock recovery, that may not work.
Click to expand...
Click to collapse
Thank You!!! It didn't work in the bootloop, so I had to let the phone drain its battery and shut itself off, then I was able to enter the bootloader and reinstall lineage. Thanks so much!
mycalculations said:
Hello, I recently came on a pixel phone to build and use lineageOS on. Upon rebuilding, I believe I performed adb sync wrong the device and damaged system. After that, my adb keys became unauthorized and I am unable to access the bootloader menu(I press power and volume, but phone boots into Bootloop). I tried the steps to get to bootloader menu, but the phone doesn't power completely off, and when I press the power button it gives me the launch screen saying press power to pause/continue boot, not allowing me to go into bootloader
My bootloop goes like this: Bootloader integrity screen(bootloader unlocked, cannot be verified) --> Google loading screen --> Android recovery. This shows 2 options with the message, "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device". The two options are to try again or data reset.
I press try again, and the same bootloop ensues, sometimes getting to lineage loading logo, but then back to the same recovery error regardless. If I press the buttons(power and vol up), to go into recovery, it just shows an android with a warning sign above it, giving a message saying "Error!" on the bottom. My adb on the computer shows as unauthorized, so I don't know how I can fix this. Google has said the warranty is expired and cannot do anything to help. Ideas to fix? Thanks for help in advance!
Click to expand...
Click to collapse
Similar problem when i try to flash pixel dust rom through adb sideload... After successful installation reboots to system through twrp it shows no os installed then after i cant get to bootloader only black screen shows no display and now on pc phone not detecting .... connect and disconnect sound is there but nothing on screen
LANDTESTER said:
Similar problem when i try to flash pixel dust rom through adb sideload... After successful installation reboots to system through twrp it shows no os installed then after i cant get to bootloader only black screen shows no display and now on pc phone not detecting .... connect and disconnect sound is there but nothing on screen
Click to expand...
Click to collapse
Is ur bootloader unlocked? If so, use twrp to perform a full wipe and install from twrp as well. Of you can't access trwp, and are in a bootloop, do the same thing I did: let the phone lose all it's battery, so it's outta the loop, connect the phone to a charger, then hold power and volume down. This should get you into bootloader mode where you can then use fastboot to flash twrp.
mycalculations said:
Is ur bootloader unlocked? If so, use twrp to perform a full wipe and install from twrp as well. Of you can't access trwp, and are in a bootloop, do the same thing I did: let the phone lose all it's battery, so it's outta the loop, connect the phone to a charger, then hold power and volume down. This should get you into bootloader mode where you can then use fastboot to flash twrp.
Click to expand...
Click to collapse
Oh so after that i can get to bootloader .....hmm let me try thanks bro
mycalculations said:
Is ur bootloader unlocked? If so, use twrp to perform a full wipe and install from twrp as well. Of you can't access trwp, and are in a bootloop, do the same thing I did: let the phone lose all it's battery, so it's outta the loop, connect the phone to a charger, then hold power and volume down. This should get you into bootloader mode where you can then use fastboot to flash twrp.
Click to expand...
Click to collapse
My bootloader is unlocked but phone not detected on pc only black screen nothing else.... Red light flashes whenever connect to charger