hi
I have problem on 920v
my phone is factory unlocked (knox warranty void: 1 (0x0000) and I'm living in Asia
I don't know to flash which firmware
in the setting> about phone:
software version: G920VVRU1AOC3
hardware version: G920R4.02
model number: SM-G920V
baseband version: G920VVRU1AOC3
build number: LRX22G.G920VVRU1AOC3
but in the Odin mode:
product name: SM-G920R4
knox warranty void: 0 (0x0000)
and in recovery:
LRX22G.G920R4TYU1AOD3
does anybody have the same problem?
today I wanted to flash 5.1.1 G920VVZW4BOG9 firmware on my phone but it failed after 1sec.
I tried to flash G920R4 and it worked but now it is bricked and it remains on samsung logo
I used the download mode and used twrp recovery to restore my last Rom but It isn't work too
I only can flash 920R4 ROMs but my original build number was 920v
what to do?
:crying: :crying: :crying:
y phone build info is: ( I used "root checker" for this information)
BOARD : universal7420
BOOTLOADER : G920R4TYU1AOD3
BRAND : Verizon
CPU_ABI : arm64-v8a
DEVICE :zeroltevzw
DISPLAY : LRX22G.G920VVRU1AOC3
HARDWARE : samsungexynos7420
HOST : SWDD5706
ID : LRX22G
MANUFACTURER : samsung
MODEL :SM-G920V
PRODUCT: zeroltevzw
INCREMENTAL : G920VVRU1AOC3
RELEASE : 5.0.2
SDK_INT : 21
RADIO :G920R4TYU1AOD3
You will need to flash the OC3 or OE2 firmware if you want to be able to root. If you do not care about root flash OF1 or higher. You will have to stay with Verizon firmware because the 920v you have is from Verizon. Even though Knox is tripped you still have to stick with their firmware because it's the only one that will flash thanks to the locked bootloader. There is no way for us to bypass that. The firmware files I have are here. http://forum.xda-developers.com/showpost.php?p=60427963&postcount=2
thanks a lot
but the problem is that ODIN fails when I want to flash 920v firmwares
I tried OG9 and OG7 but it fails
the only ROM that ODIN flashed was G920R4TYU3BOJ3
I download OC3 and try again
If I want to use a custom ROM, which one works with 920v or 920R4?
arther kernel and unikernel don't support these versions
what's the diference between Stock OE2 Tar and OE2 Retail Firmware?
is there anyway to flash rom without ODIN?
thanks a lot
but the problem is that ODIN fails when I want to flash 920v firmwares
I tried OG9 and OG7 but it fails
the only ROM that ODIN flashed was G920R4TYU3BOJ3
I download OC3 and try again
If I want to use a custom ROM, which one works with 920v or 920R4?
arther kernel and unikernel don't support these versions
what's the diference between Stock OE2 Tar and OE2 Retail Firmware?
is there anyway to flash rom without ODIN?
If you flashed any firmware higher than OC3 you will not b able to downgrade it with the 920V. If you are able to flash the OC3 stock tar with Odin then you can root it with pingpong root and use flashfire to flash ROMs from here. The firmware files only have the modem, bootloaders and stock recovery. You will need to download the stock tar that has the system folder as well. The stock tar has everything that comes with the phone out of the box new. For the 920V Odin is used for the tar and firmware files and flashfire is for the ROMs.
Odin can't flash any firmware except G920R4TYU3BOJ3
I think my phone is 920R4 and I don't know how 920v was installed on it
in my download mode:
product name: SM-G920R4
knox warranty void: 0 (0x0000)
now what can I do?
anyway that my phone works again
can I use CF-root to install custom ROM?
i'm disappointed
I only can flash 920r4 and it's not working
even I can't install custom Rom
is there any Rom that can be installed using twrp recovery?
I'm soft bricked and can't access my phone to iinstall using flashfire
Odin can't flash any firmware except G920R4TYU3BOJ3
I think my phone is 920R4 and I don't know how 920v was installed on it
in my download mode:
product name: SM-G920R4
knox warranty void: 0 (0x0000)
now what can I do?
anyway that my phone works again
can I use CF-root to install custom ROM?
i'm disappointed
I only can flash 920r4 and it's not working
even I can't install custom Rom
So,
Today I flashed the UK BTU firmware (G920FXXU3COI9). However, when I extracted the file it had 4 files for AP, BL, CP AND CSC so I used them all. However, now I can't go back to my previous firmware (G920FXXU2COH5) because when I try flashing it with Odin it says on the phone: sw rev check fail.
I want to go back to this firmware because I have a Nandroid backup with all my stuff and it doesn't work when i try to restore it on the new firmware. Can you help me with the right file to flash? Do I need the CSC file of the old firmware as well? Can you help me please?
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
This post was taken from this thread
$tefanDroid said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
This post was taken from this thread
Click to expand...
Click to collapse
Yeah I saw that, but the Mega download link is invalid
Merry Xmas to all
I have an g920i not rooted , flashed a TTT firmware 5.1.1. (trinidad and tobago) and now the phone cant get 4G networks
all seem to look fine but there is no way to flash an previous 5.1.1. firmware (Mexico TCE) which has the 4G running smooth
Odin pops an NAND write fail error, and i cant get beyond that point
any ideas?
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...
Anyone????
i am always getting error at the cm.bin on odin...
i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone
domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?
when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......
my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo
help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1
Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch
palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help
cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5
check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.
I have a galaxy s7 SM-G930F which is currently on U5 Oreo Firmware, i wanted to downgrade it to Nougat U2, tried flashing it with Odin 3.13.1 , the flash failed and i ran into an SW REV error (Device:5, Binary:2), tried several fixed but no solution .
i have 3 questions:
1. is it even possible to downgrade from U5 to U2 (i assume the answer is no but i need confirmation)
2. is it possible to install a custom rom with TWRP that is based on U2 (if yes - how, if not - why)
3.when flashing stock firmware i read that the bootloader version of the firmware must match the current bootloader version, how do i check my current bootloader version and the downloaded firmware bootloader version?
LSGio said:
I have a galaxy s7 SM-G930F which is currently on U5 Oreo Firmware, i wanted to downgrade it to Nougat U2, tried flashing it with Odin 3.13.1 , the flash failed and i ran into an SW REV error (Device:5, Binary:2), tried several fixed but no solution .
i have 3 questions:
1. is it even possible to downgrade from U5 to U2 (i assume the answer is no but i need confirmation)
2. is it possible to install a custom rom with TWRP that is based on U2 (if yes - how, if not - why)
3.when flashing stock firmware i read that the bootloader version of the firmware must match the current bootloader version, how do i check my current bootloader version and the downloaded firmware bootloader version?
Click to expand...
Click to collapse
1. No it is not, once a bootloader is updated it cannot be downgraded
2. No not anymore since S6 because boot files reside on the EFS partition which is not altered when new firmware is flashed. The boot program is written to only allow upgrades to it, never downgrades (thats the easiest way to explain it.) The primary reason for firmware and thus bootloader upgrades is due to security vulnerabilities.
3. It only has to match or be higher. Within the firmware itself the bootloader version is represented by either the letter U or S, for example G930FXXU5ESD2. = U5, firmware is on bootloader version 5. It could have read S5, it would mean the same thing.
In the settings of your phone, tap >about phone>software infomation>baseband version G930FXX......
u6 bootable factory binary for g930f
Hello my wiz kids friends does any 1 have the u6 bootable combination firmware to share please
Someone help me to fing suitable firmware
I've tried two versions
1. G955FXXSBDUA3_G955FOXMBDTJ1_INS
2. G955FXXSBDTJ1_G955FOXMBDTJ1_INS
SWREV: B:12 K:11 S:11
Can someone tell me which binary is suitable for my device
G955FXXUCDUD1
Petitmaurice said:
G955FXXUCDUD1
Click to expand...
Click to collapse
Thank you very much I've already found the supported version which is flashed successfully but now after flash it automatically booted into recovery as normal for erasing data and installing system updates but after that it reboot and stuck on Samsung Galaxy S8+ logo.
I've flashed 3 firmware which is flashed without error.
1. G955FXXUCDUD1 - BRASIL 2. G955FXXUCDUD1 - GLB 3.G955FXXUCDUD3