[Completed] Hard Bricked Samsung Galaxy Tab 2 - XDA Assist

So, I have a GT-S5570 that is hard bricked. It is stuck on a black screen with a yellow hazard symbol and "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". When I connect it to my computer, my computer says that it has malfunctioned. Any help would be appreciated.

mrbrokenphone said:
So, I have a GT-S5570 that is hard bricked. It is stuck on a black screen with a yellow hazard symbol and "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". When I connect it to my computer, my computer says that it has malfunctioned. Any help would be appreciated.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Here is the Tab 2 homepage:
Samsung Galaxy Tab 2
Here is where you should ask for help:
Galaxy Tab 2 Q&A, Help & Troubleshooting
Good luck!

Related

[Completed] My Samsung tab 2 7.0 p3100 not able to reset! Help??

"firmware upgrade has encountered an issue. Please connect to kies and try again" tab doesn't proceeds after this screen.
I tried to reset it using its firmware and Odin 3
The process gets completed....
But device doesn't reboot...
When switched onn manually again.... It shows up with same screen
"firmware upgrade has encountered an issue. Please connect to kies and try again"
Please help ASAP!
XDA Visitor said:
"firmware upgrade has encountered an issue. Please connect to kies and try again" tab doesn't proceeds after this screen.
I tried to reset it using its firmware and Odin 3
The process gets completed....
But device doesn't reboot...
When switched onn manually again.... It shows up with same screen
"firmware upgrade has encountered an issue. Please connect to kies and try again"
Please help ASAP!
Click to expand...
Click to collapse
You can check this thread: Hard Reset doesn't work/deleted apps are restored after reboot.
But I think better to start here: [Q] Back to stock? P3100 (with 3g) - for waranty.
Or here: [Q] GT-P3100 How to revert back to stock firmware from CM9 build.
Flashing the official/stock firmware should help.
Then you can use the stock recovery to wipe data (= do a factory reset).
For further questions, please register on xda and post in the Galaxy Tab 2 Q&A, Help & Troubleshooting forum.
Thread closed. Thank you.

[Completed] [Q] my Galaxy mega 6.3 is not recognized by computer

Hi.
I have a galaxy mega 6.3 and it's got stuck in "firmware upgrade encountered an issue" screen.
when I connect it to computer in order to flash a rom with odin , computer doesn't recognize it. even it's not shown in device manager and it seems like phone is not connected. I have already installed drivers and I also have kies on my PC. I'm totally confused because I have been searching for a solution but I haven't found any answer.
Also My phone doesn't get into download mode.
Can someone help me?:crying:
SimpleTool said:
You need to download the drivers for your device. It contains Fastboot and ADB for your device. Once it's installed, your computer should be able recognize the phone.
Click to expand...
Click to collapse
I have already installed the drivers.
I can't get into download mode. maybe that's the reason.
anything I do, it shows the screen " firmware encountered an issue"
no download mode and no samsung logo while turning the phone on.
Hi
Thanks for writing to us at XDA Assist. I think it's best to ask your question in the Galaxy Mega q&a section here:
Galaxy Mega Q&A, Help & Troubleshooting
Good luck!
Thread closed, thanks.

[Completed] [Q] Galaxy Tab (GT-P1000) stuck at blinking phone/computer screen

My brother installed cyanogenmod on this tablet, and i didn't like it, so i tried flashing the GT-P1000 stock firmware via ODIN. It didn't brick but it wasn't the right firmware so i tried going back to cyanogenmod and i bricked it. It doesn't turn on if i hold the power button and once i plug it onto the charger it gives me a blinking PHONE ------!------ COMPUTER screen, and i can't get into downloading mode or recovery mode the only option i have is to press POWER+VOL UP+VOL DOWN and a screen which shows "Power reset or uknown upload mode" appears.
How can i solve this? Do i just wait for it to charge completely and try flashing a pit via ODIN?
Any help is appreciated
Hi there,
You'd be best served asking for help from the experts who own your device, here:
Galaxy Tab Q&A, Help & Troubleshooting
Also please see this FAQ: [Questions] & [Answers] For (Nearly) All Your Galaxy Tab Problems.
Good luck

[Completed] galaxy tab 3 not powering on

help please, i recently bought a galaxy tab 3 sm-t210r for a low price since the tab was on samsung logo boot loop, so i though that all i had to do is restore to stock using odin, the tab turned off about one hour after i bought so i never got the chance to try to restore, now the tab does not power on or charge, only sign of life on it is when connected to pc via usb, but pc keeps on asking for "EMEI" driver which i cannot find, i have installed the proper drivers for this device, i have installed kies also tried odin but none detect the tab, i would really appreciate some help on this issue. THANK YOU SO MUCH IN ADVANCE
XDA Visitor said:
help please, i recently bought a galaxy tab 3 sm-t210r for a low price since the tab was on samsung logo boot loop, so i though that all i had to do is restore to stock using odin, the tab turned off about one hour after i bought so i never got the chance to try to restore, now the tab does not power on or charge, only sign of life on it is when connected to pc via usb, but pc keeps on asking for "EMEI" driver which i cannot find, i have installed the proper drivers for this device, i have installed kies also tried odin but none detect the tab, i would really appreciate some help on this issue. THANK YOU SO MUCH IN ADVANCE
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-tab-3
After creating your account, please post your question here:
http://forum.xda-developers.com/galaxy-tab-3/help
The experts for your device are located there and will be able to help.
Good luck!

[Completed] Galaxy Tab S 8.4 - Can't get past through Samsung logo

Hello,
So I have a little problem. I was trying to install a ROM and did some mistake. I wiped almost everything on my tablet and restore the system. It said "there's no OS installed" and when I try to reboot I can't get past through the Samsung logo.
I know how to get to download mode and recovery mode, Odin recognizes my tablet while in download mode, but I don't know what to do. Kies, on the other hand, doesn't recognize my tablet and still says "Connecting..."
Can someone help me please?
XDA Visitor said:
Hello,
So I have a little problem. I was trying to install a ROM and did some mistake. I wiped almost everything on my tablet and restore the system. It said "there's no OS installed" and when I try to reboot I can't get past through the Samsung logo.
I know how to get to download mode and recovery mode, Odin recognizes my tablet while in download mode, but I don't know what to do. Kies, on the other hand, doesn't recognize my tablet and still says "Connecting..."
Can someone help me please?
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Galaxy Tab S 8.4 Q&A, Help & Troubleshooting
Your device experts are located there....(You will have a much better chance of getting help there)
Also, here is the Main Galaxy Tab S 8.4 Area just in case:
http://forum.xda-developers.com/galaxy-tab-s
Always Remember to use the Search...
Thank you! Hope this help!

Categories

Resources