Please help me out - HTC Pico (Explorer)

I have rooted and unlocked bootloader HTC pico...
I have tried flashing
cm-10.2-20131018-UNOFFICIAL-pico.zip
cm-11-20141020-UNOFFICIAL-pico.zip
and Speed Droid Pico Build#2
First two always fail.. In the twrp (2.5.0.0) console it shoes unable to find partion, updating partition and then failed...
and when I try to install speed droid.. It stucks at beats audio logo...
Please help me..
HBOOT 1.03.0000
RADIO 1.11.82.17
Also I am unable to flash any other recovery.. When I try to flash it from fastboot.. It always shoes failed (too many links)

Did u made SD-Ext partition before flashing these roms?

Related

[Q] Bricked htc sensation ? BootLoop & No Recovery

Hi everyone,
I'm gona try to explain my problem with my poor English, i do my best so don't get Mad at me :
Symptoms :
- Htc Sensation Stick in a Boot Loop, I can go on Hboot , I can do Fastboot command.
- I CANT go into recovery if i try to go into recovery i got white HTC screen then bootloop.
Where i came from
Yesterday :
Update Firmaware last 3.24 on the forum with no superCID,
Flash the "Blitz senseLess" roms
Flash the settings come with
Flash Blitz update 2
Flash Blitz update 3.
Boot !! It works.
Today :
Reboot my phone this morning, go into the bootLoop,
Try to go to recovery --> BootLoop.......... Hard time
Install SDK Android
Try update recovery through fastboot --> Ok but Still BootLoop
Try flashall don't work
Try flash CustomROm --> Don't know how to do
try : fastboot -w --> ok
try others stuff like downgrade Firmware still bootloop & no recovery
Question
How I can get a recovery to work ?
My Phone Is brick forever ?
How i Can flash a customrom from fastBoot ?
Thanks in advance & thanks to the XDA comunity for all the work Done here
rabar omer said:
Hi everyone,
I'm gona try to explain my problem with my poor English, i do my best so don't get Mad at me :
Symptoms :
- Htc Sensation Stick in a Boot Loop, I can go on Hboot , I can do Fastboot command.
- I CANT go into recovery if i try to go into recovery i got white HTC screen then bootloop.
Where i came from
Yesterday :
Update Firmaware last 3.24 on the forum with no superCID,
Flash the "Blitz senseLess" roms
Flash the settings come with
Flash Blitz update 2
Flash Blitz update 3.
Boot !! It works.
Today :
Reboot my phone this morning, go into the bootLoop,
Try to go to recovery --> BootLoop.......... Hard time
Install SDK Android
Try update recovery through fastboot --> Ok but Still BootLoop
Try flashall don't work
Try flash CustomROm --> Don't know how to do
try : fastboot -w --> ok
try others stuff like downgrade Firmware still bootloop & no recovery
Question
How I can get a recovery to work ?
My Phone Is brick forever ?
How i Can flash a customrom from fastBoot ?
Thanks in advance & thanks to the XDA comunity for all the work Done here
Click to expand...
Click to collapse
Take the battery out, and sd card and SIM.
leave for 10 mins or so.
insert the sd card and sim, then the battery and try a recovery boot again.
That should work

hanged on logo

hi
my phone hanged on htc logo
hboot and recovery (clock work recovery) is open but i can not wipe or factory set(clear storage)
i try ruu but ruu stop in rebooting to bootloader
i try with coustom rom but no answer
my phone is s-off
please help me
please help me...........................:crying:

Common problem with HTC Desire 700/7060

My phone is HTC desire 700 / 7060,
I used "root" and after restarting the phone is stop and now is hanging on HTC logo..
I tried all the recoveries and boots i found in xda-developers forums, but nothing work..
The phone model is CP5DUG..which is a chinese version, i want recovery and boot for this version.
Please help
No one know how to solve the problem ..
HTC desire 700 / 7060 firmware
yousef-88 said:
My phone is HTC desire 700 / 7060,
I used "root" and after restarting the phone is stop and now is hanging on HTC logo..
I tried all the recoveries and boots i found in xda-developers forums, but nothing work..
The phone model is CP5DUG..which is a chinese version, i want recovery and boot for this version.
Please help
No one know how to solve the problem ..
Click to expand...
Click to collapse
here you can find your firmware bro flash it
then you can recover your phone
yousef-88 said:
My phone is HTC desire 700 / 7060,
I used "root" and after restarting the phone is stop and now is hanging on HTC logo..
I tried all the recoveries and boots i found in xda-developers forums, but nothing work..
The phone model is CP5DUG..which is a chinese version, i want recovery and boot for this version.
Please help
No one know how to solve the problem ..
Click to expand...
Click to collapse
I'm note sure but if you flash any other recovery (not that which is installed already).... i think it solves
And i don't where to get these
gud luck
Thanks for help bro
I tried this link and I unlocked the bootloader, but not able to flash system.img
first it said not enough space , now it says it could not allocate *number* bytes
When trying to "fastboot erase /system" it says FAILED: remote: not allowed
same thing for erase /userdata /cache or any other partition
I tried to flash a stock recovery, finished successfully but doesn't boot into recovery, it just hangs on the screen of a device with the red attention triangle.
I have S-ON .. couldn't find any tutorial on how to S-OFF this device
it's a pretty much "left-behind" device .. there are no posts of it , no official ROMs , no custom recoveries , no RUUs , nothing.

[Q] My device went bootloop!!!! stuck at boot screen!!

GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom

i have twrp Recovery problem with my htc explorer

hi
i have problem with my HTC explorer phone i can flash cwm Recovery and philz touch but i can't flash any twrp Recovery i try to flash it from phone and Fastboot and still not working it show {FAILED (remote: image update error)} plz help i want to flash cm 12
try to ask your question here:
http://forum.xda-developers.com/htc...pment/twrp-2-8-7-0-twrp-htc-explorer-t3282943

Categories

Resources