Hey,
so i was on nighlty CM12 and wanted to switch to CM13.
After i downloaded everything i booted to twrp and flashed the CM13 nightly zip and opengapps for 6.0.
Then i think i made the mistake. I thought i had to update the recovery so i switched to "Flash Images" and flashed the CM13 recovery to the recovery partition.
After flashing the cache i waited like 20 minutes and it was stuck on "Powered by android" screen.
So now it is still hanging there. Device is recognized as ADB device but adb devices show "unauthorized".
Booting with Vol+and Power results in a black screen + the device is shown in the device manager as "QHSUSB_BULK"
Do i have to try the hard brick method or are there other ways?
(I tried to install the qualcomm drivers but im getting an error about broken drivers)
I hope someone can help me
Do you make any backup of your ROM before flashing
@abhishek said:
Do you make any backup of your ROM before flashing
Click to expand...
Click to collapse
Sure, i did a full backup but im unable to boot into recovery
Use Bacon Root Toolkit to restore bricked OnePlus One ..
Sent from Bacon (OnePlus One)
Related
Hi all,
I'm trying to get root access on my OPO, so I read some information about the process.
It has CM 11S R38.
* Update recovery unchecked.
* Bootloader unlocked.
Til here everything is OK. The problem starts when I install TWRP or any other custom recovery (I've tried also with Philz CWM). After the installation (via fastboot) it says everything was correct, but when I restart in Recovery the device just "freezes" (actually is the screen which keeps with OPO Logo) and then it becomes to black screen. After this happens I have to force a soft-reset to restart system.
I've tried to roll back to the stock recovery and it works perfectly. But any time I try to flash the custom recovery again, then blackscreen...
I really want to root my device, but I need the custom recovery to install the binaries.
I would be happy if I can bypass the recovery installation, that's not compulsory for me. My plan was indeed flash the binaries and roll back to stock recovery.
Thanks in advance!:good:
ironwick said:
Hi all,
I'm trying to get root access on my OPO, so I read some information about the process.
It has CM 11S R38.
* Update recovery unchecked.
* Bootloader unlocked.
Til here everything is OK. The problem starts when I install TWRP or any other custom recovery (I've tried also with Philz CWM). After the installation (via fastboot) it says everything was correct, but when I restart in Recovery the device just "freezes" (actually is the screen which keeps with OPO Logo) and then it becomes to black screen. After this happens I have to force a soft-reset to restart system.
I've tried to roll back to the stock recovery and it works perfectly. But any time I try to flash the custom recovery again, then blackscreen...
I really want to root my device, but I need the custom recovery to install the binaries.
I would be happy if I can bypass the recovery installation, that's not compulsory for me. My plan was indeed flash the binaries and roll back to stock recovery.
Thanks in advance!:good:
Click to expand...
Click to collapse
i had issue when my recovery was always returned to stock CM recovery
- in developer options there is checkbox "Update CM recovery", have you unchecked that?
Night5talker said:
i had issue when my recovery was always returned to stock CM recovery
- in developer options there is checkbox "Update CM recovery", have you unchecked that?
Click to expand...
Click to collapse
Yes, and did not work.
But finally I managed to install Philz Recovery. So it's solved for me. :good:
I have the same problem, but I need multirom and without TWRP it doesn't work. Anyone help us?
ValoXis said:
I have the same problem, but I need multirom and without TWRP it doesn't work. Anyone help us?
Click to expand...
Click to collapse
For me TWRP works only on ColorOS but the OS doesn't boot, with 11S the OS boots but recovery doesn't boot.
I own a moto g xt 1033 and installed cyaonogem mod 13, I used to recovery twrp,but he did not quit the cyaonogemmod robot image, then restarted and tried to reinstall the android back , but when the device will start it appears the image of the unlocked bootloader and restarts and it becomes infinite.
when I try to clear system cache, the TWRP error , it seems the TWRP is corrupted , what can be ?
If anyone can help me I can post a video on youtube showing defects
What TWRP version are you using? What were the steps you took to install CM and the stock ROM? What was the error that TWRP gave you?
Professor Gibbins said:
What TWRP version are you using? What were the steps you took to install CM and the stock ROM? What was the error that TWRP gave you?
Click to expand...
Click to collapse
Sorry for the delay....i using twrp 2.8.5.0, I stored in the internal storage to cyanogemcm12, It was executed wipes, install cyanogemmod, but got stuck in logo cyanogem,
I returned the recovery was made and wipes again, and install Rom XT1033 Android 4.4.4 KitKat Dual Chip, unfortunately now he does not leave the image "boot loader" unlocked).
*I have access to fastboot via adb!
*I have access to recovery!
*however after all these errors, the TWRP does not allow Wipes, and also appears error installing rom.
*When I install a rom stock fastboot , this does not seem a mistake, but goes into bootloader and is restarting without stopping
help you if I put a video on youtube?
I will record a video and share tomorrow.
Thanks
Sorry my english
Professor Gibbins said:
What TWRP version are you using? What were the steps you took to install CM and the stock ROM? What was the error that TWRP gave you?
Click to expand...
Click to collapse
i using twrp 2.8.5.0, I stored in the internal storage to cyanogemcm12, It was executed wipes, install cyanogemmod, but got stuck in logo cyanogem,
I returned the recovery was made and wipes again, and install Rom XT1033 Android 4.4.4 KitKat Dual Chip, unfortunately now he does not leave the image "boot loader" unlocked).
*I have access to fastboot via adb!
*I have access to recovery!
*however after all these errors, the TWRP does not allow Wipes, and also appears error installing rom.
*When I install a rom stock fastboot , this does not seem a mistake, but goes into bootloader and is restarting without stopping
i have link youtube
Thanks
Sorry my english
To get the phone working again, I would suggest flashing latest 5.1 version of these factory firmware images (for your exact device model) through fastboot.
To flash CM13, try using TWRP 3.0.2-0, and the latest CM13 snapshot. Note that the first boot of Cyanogenmod can take a long time (20+ minutes).
Professor Gibbins said:
To get the phone working again, I would suggest flashing latest 5.1 version of these factory firmware images (for your exact device model) through fastboot.
To flash CM13, try using TWRP 3.0.2-0, and the latest CM13 snapshot. Note that the first boot of Cyanogenmod can take a long time (20+ minutes).
Click to expand...
Click to collapse
I tried all these Step
I think TWRP is corrupt, or the fast i dont know , it installs the features, but not fixed
link my video youtube.com/watch?v=ZGgpL_JCQSY
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Molex69 said:
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Click to expand...
Click to collapse
I guess you didn't read the OP of Oxygen Os correctly,he clearly mentioned that this 'Tuga Power Recovery' is patched to work with Oxygen Os's firmware and one should not flash any other recovery.Now,what you can do is this,
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
> Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.Avoid using any Antivirus program while doing this as they might give false alarms.After this you'll be restored to TWRP then you can flash any rom you want.The reason due to which you weren't able to find 'TugaPower Recovery' on TWRP page is because this is an Unofficial Recovery.
Question
What does the program do with the OPO?
If you are familiar with fastboot commands, this method should work. Had my OnePlus in the same situation last night messing around with Efidroid. Phone was bootlooping. Efidroid boot menu as well as recovery mode were both inaccessible. I had tried several other things but none worked for me. *CAUTION: this method did ERASE my userdata.* I downloaded a fastboot-able stock full firmware zip, then manually reflashed device. My beloved OnePlus is no longer my daily driver but still my fave device to experiment with so I just used COS 13.1 file. After full reboot, I downloaded and flashed official TWRP. Device is fully functional again, but without OOS installed.
Molex69 said:
What does the program do with the OPO?
Click to expand...
Click to collapse
It'll change your firmware and alter your recovery to a functional TWRP.You'll lose Oxygen Os after doing this.Though you can use this anytime when not being able to flash TWRP.
What should i do
Thanks a lot thanks to the method you told me my OPO has recovery again really thanks, but I have a question, I still in the TugaPower recovery, should I flash the stock recovery or the newest version of TWRP?
Because I do not know if flashing again the TWRP will happen the same
Hello everyone!
I am new here and really looking forward for some answers. I own oneplus one and had a good experience with it. I had upgraded to custom rom that is lineage os 14.1
I wanted to upgrade it to 15.1 through Twrp. I followed the same procedure as i did for last flashing. I wiped the old data and everything and started to flash new rom. But this time twrp was giving an error. When I did research on that i found that i needed to upgrade to newer version of twrp to install lineage os 15.1
I did the same. And then end of it I just unselected the Supersu root and it reboots. Now when I go to the twrp recovery. The oneplus icon shows but then nothing happens. My phone now doesn't have a rom and twrp recovery won't open. When I connect it to my laptop through fastboot, cmd doesn't recognizes the device. I don't have any knowledge about tech and stuff. And I might have done something wrong. Please help me with some solutions
First of all, try to reinstall TWRP trough fastboot (boot in bootloader mode with Volume UP + power), just google a guide if you don't know how fastboot works. also be sure to use the correct twrp for bacon
After that you should be able to boot back in recovery and flash your rom
if still it doesn't work, follow this guide
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Sometimes it happens we brick our phones but No worries as long as you can go to fastboot you can always restore back to how it was before.
Either use the Program the guy above provided or this guide:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
I want to know how to flash the twrp again through fastboot, because when I connect it, phone is not detected in cmd. It says no fastboot devices are there. But then I checked and it says some android thing is connected in device manager. I hope it is my Oneplus one. How to pass this step?
It's the android drivers. Make sure you have the drivers installed.
Thank you so much. I was able to download the twrp again and flashed the 14.1 lineage os. The latest twrp is not flashing in the phone i don't know why and because of that 15.1 lineage os is not flashing and shows error. But still it's a relief that my phone is working. Also, when i switch on the camera it's not working and the flashlight icon also is dim and doesn't gets clicked and not works.
I have a lenovo k6, was trying to install this LineageOS, now I can't even get to the TWRP screen, when I press volume up+power it just stays in the lenovo initial white screen, is there anything I can do to fix it?
Also when I connect the usb, nothing appears in my PC.
If you don't have backups then all you can do is restore your phone as new.
Take it to authorized service center and let them flash the Stock ROM
jwoegerbauer said:
If you don't have backups then all you can do is restore your phone as new.
Take it to authorized service center and let them flash the Stock ROM
Click to expand...
Click to collapse
I bought this phone 3 years ago, there's no warrant anymore
Hey there i was trying to root my device with twrp( v2.6.3). My phone is htc one m7. I wiped everything by mistake. Now i just see the twrp screen thats all. And my phone dont have OS. I tried to install roms with twrp but i had an error like "twrp error flashing zip updating partition details". What should i do?
Boot to bootloader. Using your PC, Fastboot boot twrp (don't install, just boot). While in twrp, sideload install the rom.