Database Info

[ROM] ANIMUS 1.1.9 for samsung galaxy w

Finally, after several tests, experiments, and cursing the Rom ANIMUS 1.1.9 and ready
the rom does not want to be the best rom around for our device
ANIMUS was created to give everyone the chance to cook their own rom modding and staff.
the basis of the Rom is 2.3.6 I think the most powerful device for our
Roma is a technically stocks, but lighter, eco additions:
Android 2.3.6 (Gingerbread)
zipalign
Busy box
deodex
enabled bash
app2sd enabled
The ROM is significantly lighter than the basic
installation
1.Download the rom
2.mettere the file to the sd of the device
3.disconnect the device from the PC and turn it off
4.Switch in recovery
5.nel recovery menu to wipe ALL
6.go sd card for installation in the menu and scroll to find the file of the Rom
7.lanciare the installation
8.alla end of the recovery procedure to restart the system
this is the link http://www.megaupload.com/?d=RSVBW3HS
end!
this rom with the kitchen and customizable dsixdia easily ...
tell you guys .. a small step was taken to work. good luck to all the dev!
I do not assume any liability you do so at your own risk
thanks:
scupinatos for availability and kindness
morfes for advice and pazienzaaaaa
qzem ready for answers to any time of night and day
Raidzero for the recovery that has allowed us to get this far
Enjoy
Sorry for my bad English

have you benchmark it?

gymnastiar said:
have you benchmark it?
Click to expand...
Click to collapse
Off course! Personally tested

can u upload the screen shot plizzz . . .

mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping

Can you upload some screenshot please??..Thank a lot..

Can you reach the Download Mode ?
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E

THE-E said:
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E
Click to expand...
Click to collapse
i can reach the download mode ..
tell me how then.

jayidoans said:
i can reach the download mode ..
tell me how then.
Click to expand...
Click to collapse
First I need to know from where you are, because there are different firmwares. Or are you anyway going to flash the custom firmware again ?

THE-E said:
First I need to know from where you are, because there are different firmwares. Or are you going to flash anyway the custom firmware again ?
Click to expand...
Click to collapse
i'm from indonesia ..
if possible i want to try this custom ROM .

jayidoans said:
i'm from indonesia ..
if possible i want to try this custom' ROM .
Click to expand...
Click to collapse
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.

THE-E said:
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.
Click to expand...
Click to collapse
thanks for your response bro
anyway, is there any download site that's not limiting download speed ?
like mediafire or something ?

any screenshot of this custom rom?

jayidoans said:
mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping
Click to expand...
Click to collapse
Have you wiped everything before flashing? You should if you haven't.

qzem said:
Have you wiped everything before flashing? You should if you haven't.
Click to expand...
Click to collapse
I had ..
Wipe all + another wipe before doing the update from SD card ..
and the result is Boot Looping.
now i'm trying to flash to stock ROM .

guys I did not put any screenshots just because it's identical to the stock rom

for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.

snake873 said:
for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.
Click to expand...
Click to collapse
i think that there is no difference between euro or asia rom .
but i cant install your custom ROM,
as i said before, it stuck at boot looping
and anyway, for App2SD mods,
should i have a microSD card installed ? and should i format it as ntfs and ext3 ?

how much the quadrant score for this rom?..My stock rom only get 1199.

lvoonjian8888 said:
how much the quadrant score for this rom?..My stock rom only get 1199.
Click to expand...
Click to collapse
You do know that Quadrant scores mean nothing right?
As Chainfire once said: "However, if you put any trust in Quadrant scores you could use them to prove that dancing naked for 5 minutes in your garden affects device performance."

[GUIDE] How to Restore Stock Firmware Images in All Tab 4 Series: 7.0, 8.0 & 10.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys, with this guide you can restore Stock Firmware Images for all Galaxy Tab 4 Series.
This is useful to restore firmware in case something goes wrong, if you flash a custom ROM and it fails, or, for example, if Samsung decides to update this devices to Lollipop. For this you also will need stock untouched firmware.​
Pre-requisites:
1) Make a backup of everything you consider important: Apps, photos, music, etc.
2) Download drivers for your specific device from HERE, install the drivers and reboot your PC to apply changes.
3) Download Odin 3.0.9, it is attached below in this post, and extract it.
4) Download the firmware image for your specific device from HERE and extraxt the file inside, it should be a huge 1GB+ size *.tar.md5 file.
5) Make sure your device's battery is at 60% or more.
6) Enable USB Debugging on Settings > General > Developer Options (If you can't find Developer Options menu, go to Settings > General > About Device and tap several times on Build Number, then it will tell you Dev Options is enabled).
Lets start:
1) Run Odin 3.09 as Administrator (in Windows right click on Odin icon and select "Run as Administrator")
2) Turn off your tablet and now turn it on in Download Mode (press Home + Volume Down + Power buttons at the same time until the tablet turns on, then when prompted, press Volume Up button to proceed)
3) Now connect your tablet to PC via USB cable. Odin should show a plugged device and an ADDED! message, like this:
If you can't get Odin to recognise your device, check which drivers you installed or try another USB cable.
4) Make sure that Auto Reboot and F. Reset Time options are selected, like this:
5) Now check the AP option and press the AP button to find and select the firmware image (the *.tar.md5 file you extracted earlier), when you select the image, Odin will check if it has errors. If everything is OK, it should say it succesfully checked it, like this:
6) You are ready to rock, so, hit the START button and wait...
7) Go, watch TV, chat with friends, make a sandwich or play Chess with your cat.
8) Once completed, you will see the Pass! message in ID:COM section, with a green background. Your tablet should auto reboot automatically.
9) Unplug your tablet.
10) Enjoy all the bloatware once again!
Thanks for reading and if you have doubts, let us know in the comments.
Cheers!!!​

Thank You!
Thanks Man! Custom ROMS are fun but it sucks when something is not working right that which was working perfectly in the Stock ROM. Will wait patiently. hope Lollipop comes to SM-T230NU soon

Joelsmarias said:
Thanks Man! Custom ROMS are fun but it sucks when something is not working right that which was working perfectly in the Stock ROM. Will wait patiently. hope Lollipop comes to SM-T230NU soon
Click to expand...
Click to collapse
it come in 6 months (might come tomorrow, after month any time), i promise

Any faster links?

sportscrazed2 said:
Any faster links?
Click to expand...
Click to collapse
Yes, here
Or here if you've got a 7.0

I cannot for the life of me get my tab to stay in download mode while flashing. It makes it as far as a quarter though the system partition then it just reboots back to the "firmware encountered an issue" screen. As far as I know the battery has more than enough if not a full charge!! HEEEEEEELP!!!!

thelous said:
it come in 6 months (might come tomorrow, after month any time), i promise
Click to expand...
Click to collapse
"You promise" and where did you get this information from?

Deejaydark said:
"You promise" and where did you get this information from?
Click to expand...
Click to collapse
Just wait and it will come lol, theres no hardware limitation on tab 4 7,0 so 5.1.1 will fall for us, just wait till samsung makes it or till CM12.1 is ready in xda

Will restore of stock firmware overwrite custom recovery
Hi... just finally got my Tab 4 8.0 rooted by using custom recovery and special kernel. I love having root, but in the event i have to send the tablet in for any kind of warranty repair, i just want to know if simply ODIN flashing the stock 5.1.1 firmware will restore the stock recovery and reset my knox counter and stuff... Any details greatly appreciated!

beatbreakee said:
Hi... just finally got my Tab 4 8.0 rooted by using custom recovery and special kernel. I love having root, but in the event i have to send the tablet in for any kind of warranty repair, i just want to know if simply ODIN flashing the stock 5.1.1 firmware will restore the stock recovery and reset my knox counter and stuff... Any details greatly appreciated!
Click to expand...
Click to collapse
It will definitely restore the stock recovery. Idk about resetting the flash counter, my instinct tells me no but that could be wrong. If worst comes to worst and you do have to send it in under warranty, tell them Kies broke it, that's worked for me and a few of my friends even with the knox counter tripped lmao. And if you want the quickest firmware file downloads, check out this thread. About a 5 minute download versus anywhere from 2-8 hours from any other host (seriously, it's awful).

How can I know when the flash is done?
Thank you for this helpful guide. I used this to upgrade my Samsung Tab 4 8.0 from 4.4.2 KitKat to Lollipop 5.1.1.
May I suggest, OP, adding a note on how to know when the flashing is over. I mistakenly thought that all the boxes on the top half (the row that begins with with a green "Pass" box) would all be colored. But the users should know that the flash is over when you see the green Pass box.
Please see my attached screenshot.

thanks for bringing my tablet back to life!

I played chess with my cat.... and lost. Thank you for this, my Tab has been shut away in shame for a while, and I decided to bring it back out again.

Does anyone know if this will activate knox if I revert to the original firmware? T530NU

Cyntil8ing said:
Does anyone know if this will activate knox if I revert to the original firmware? T530NU
Click to expand...
Click to collapse
From where ?

repey6 said:
From where ?
Click to expand...
Click to collapse
From 5.0.2. Non rooted T530NU. Southern Cellular version.

Cyntil8ing said:
From 5.0.2. Non rooted T530NU. Southern Cellular version.
Click to expand...
Click to collapse
nothing will be

repey6 said:
nothing will be
Click to expand...
Click to collapse
OK thanks. Reverted to stock ROM. It didn't trip knox.

thelous said:
Just wait and it will come lol, theres no hardware limitation on tab 4 7,0 so 5.1.1 will fall for us, just wait till samsung makes it or till CM12.1 is ready in xda
Click to expand...
Click to collapse
Yeah... Right. The t-230nu has less powerful hardware and its 2016 and lolipop hasnt even come.

Pix12 said:
Yeah... Right. The t-230nu has less powerful hardware and its 2016 and lolipop hasnt even come.
Click to expand...
Click to collapse
what ive seen so fsr with 4.4.2 i dont see any reason to change 5.1.1 so its not big deal

[5/15][Odin Tar][VZW] - Stock Odin Tar - ALL_VZW_G920VVRU1AOC3 - Return to stock

Here is much faster alternative to the current Odin Tar that is hanging around. Not to diss anyone but putting an important file on a server that makes you pay for high speed access is LAME. This took over 3 hours to download from that server...
This takes you back to: G920VVRU1AOC3, Wipes everything! Like a new phone
Here it is on AFH.com
Fast for every one!
ALL_VZW_G920VVRU1AOC3_G920VVZW1AOC3_CL4318389_QB4424773_REV02_user_low_ship.zip

Latest Odin for this file....

How to use!
Load Samsung Mobile Drivers
Connect Phone while in download mode (Hold Power, Home and Volume down to get there)
Unzip Odin to desktop
Unzip Odin Tar from post #1 to desktop
Open Odin
Select AP and load Odin Tar
Wait a few seconds (depending on PC Speed)
Hit Start then wait until its done.
Do NOT touch the phone while this is in process!
When completed phone will reboot to recovery, do some "stuff" then boot up fresh like out of the box new!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

I've seen you on a lot of my Samsung devices and HTC devices. Glad to have you here. So glad I decided to buy/keep this phone
Sent from my SM-G920V using Tapatalk 2

hopesrequiem said:
I've seen you on a lot of my Samsung devices and HTC devices. Glad to have you here. So glad I decided to buy/keep this phone
Sent from my SM-G920V using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I have been around a while, lol. Im old!

Don't make it too easy, lol.
I get a warm, fuzzy feeling when I see scrosler post in a dev section for a phone I want. Now I have to get this phone.

xdadevnube said:
Don't make it too easy, lol.
I get a warm, fuzzy feeling when I see scrosler post in a dev section for a phone I want. Now I have to get this phone.
Click to expand...
Click to collapse
Get it. That it is all.

scrosler said:
Yeah, I have been around a while, lol. Im old!
Click to expand...
Click to collapse
You've been around more times than the ice cream truck in the second week of July. And that's a HOT week! Lol. Thanks for all your hard work sir! Looking forward to seeing what happens and it's good to know that a lot of us here "know you" and your credibility/reputation for producing great work. Keep it up buddy! =)

Having trouble ladies and gents. Hoping for help.
I am soft-bricked ATM.
I was running fine, rooted, and have paid for Flashfire.
I downloaded our friend scrosler's flashable rom with root and I somehow soft-bricked my phone on the first try.
So....I downloaded Odin and the stock rom from this thread, even got the latest drivers just to be sure.
no matter what I do, Odin reports: "complete ( Write) operation failed." and "all threads completed, (succeed 0, failed 1)"
Have tried it multiple times, even switched to S6 factory USB cord and moved around to different prts on my system, all are motherboard driven USB ports.
Any ideas?

Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.

Rafael4096 said:
Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.
Click to expand...
Click to collapse
Screenshot the fail and post it

I thought stock unmodified Roms/source files belonged in the general section? not really development lol
Sent from my SM-G925V using XDA Free mobile app
---------- Post added at 12:22 AM ---------- Previous post was at 12:21 AM ----------
Rafael4096 said:
Cant get MD5's to match. Have downloaded multiple times, have tried multiple programs to unzip....no luck.
Never mind...was checking MD5 against unzipped file. Zipped MD5 is correct.
Going to try Odin again.
Nope.....Odin still fails.
Would love some ideas of what to try next.
Click to expand...
Click to collapse
try selecting only auto reboot in options and report back here
Sent from my SM-G925V using XDA Free mobile app

Using Odin with only Auto-reboot checked yields the same result.

Here is pic.

Rafael4096 said:
Here is pic.
Click to expand...
Click to collapse
Ok, you are failing on the very first step. Make sure you dont have KIES running on your PC, make sure you are in download mode and make sure you are using factory cable.
Let us know.

elliwigy said:
I thought stock unmodified Roms/source files belonged in the general section? not really development lol
Click to expand...
Click to collapse
Your not that guy who put the files on a server that serves 100K per second unless you pay are you? lol
PS: Why didint you ask the same question in this thread: [Root/Guide] How-to Root (Simplified)

Never had Kies on this machine. In download mode (press and hold down-vol and button at bottom of face of phone, and power).
Screen is light blue and says "Downloading..." with a big down arrow. Of course, Odin doesn't see the phone until I hit vol-up button.....and I am doing that. Factory cable. Have tried it in multiple motherboard ports....not an add-on card. I have used Odin on my S4 from this machine without problems.
Any other ideas? Thanks for trying to help me.

Rafael4096 said:
Never had Kies on this machine. In download mode (press and hold down-vol and button at bottom of face of phone, and power).
Screen is light blue and says "Downloading..." with a big down arrow. Of course, Odin doesn't see the phone until I hit vol-up button.....and I am doing that. Factory cable. Have tried it in multiple motherboard ports....not an add-on card. I have used Odin on my S4 from this machine without problems.
Any other ideas? Thanks for trying to help me.
Click to expand...
Click to collapse
Can I ask what version of Odin you are using?

3.10.6
Downloaded it from your link in this thread.

jparasita said:
Can I ask what version of Odin you are using?
Click to expand...
Click to collapse
Hopefully the one in the OP but that is a good question as well.

S7 G930T HARD BRICKED qualcomm hs-usb qdloader 9008

Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm happy when you care my threads.

Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again

atrix_noob said:
Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again
Click to expand...
Click to collapse
I tried, but it not work!

Hiep2409 said:
Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
I'm happy when you care my threads.
Click to expand...
Click to collapse
What files did you use to restore from odin? What version was you phone on and what versi9n was the firmware you flashed? Also where did you download it from? (Check for the obvious, like deleting drivers and installing the correct ones or just reinstalling them. Or just use a different computer) Let us know as much as you do, so we can help you out

Looks to me like you have A LOT of driver compatibility issues on your computer. I see some that have to do with HTC.. Do you have an HTC phone as well?
Try these steps:
1. In device Manager, double click on one of the devices with the exclamation mark
2. Click on the "Details" tab
3. Under the "Property" drop down, look for "Hardware Ids" and click on it
Highlight the first thing you see under "Value" right click on it and copy it.
Mine says: USB\VID_04E8&PID_6860&REV_0400
And it's for the SAMSUNG Mobile USB Composite Device
4. Try googling that value. You should find compatible drivers for it.
I'm attaching the USB drivers I'm using.
Hope this helps.

my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7

micallan_17 said:
my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7
Click to expand...
Click to collapse
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!

PadsPCB said:
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!
Click to expand...
Click to collapse
Without an unlocked bootloader, it's nearly impossible to brick our S7 unless you try super hard to do so. Instead of getting snappy with people here, giving us information would help.
Can you put the phone into download mode? (power off, hold vol down, home, power until a blue screen appears, then press vol up)
What exactly did you flash with Odin?
Was the flash interrupted? can you provide a log?
Whatever you did to your phone, YOU did it. So dont come here, ask for help, and then tell the people trying to help to "Grow up".

I am having the same issue, except I didn't do anything wrong with Odin, I was a just reflashing, and it broke. How can I fix this?

If you can link the xml files, i can try from my end

anyone fix this have the same issue with a s8 +

[email protected] said:
anyone fix this have the same issue with a s8 +
Click to expand...
Click to collapse
My recommendation is to go on the s8/s8+ forums, hopefully someone had the same issue and resolved it there...

unbrick hardbricked
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA

Can i have the password for the file
PLZ

carlitossatan said:
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA
Click to expand...
Click to collapse
decryption key PLEASE

I want this file, too
---------- Post added at 03:56 AM ---------- Previous post was at 03:50 AM ----------
My S7 edge has also become brick. Can you send repair methods and tool files to my Google mail? Thank you!([email protected])

Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now

Im on it...
*Detection* said:
Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now
Click to expand...
Click to collapse

Here File without password work only with old binary Like 4 But New Binary Not work I have G930V Bricked After Flash Downgrade Companion file From 8.0 I hope any one can share or make file with new binary
G930XU5
https://mega.nz/#!6NEz2I7Q!df-ITxjS0w7YZJmn1_dSoqil7KWgzYmuvLNss-qTePg
G935XU5
https://mega.nz/#!GIkh0DQD!mKb2vR6p6ivYKofhFXl9iT7DAkIg04qn-Nk32VuTHqk

g955u bit5
gonnaneedaburnheal said:
If you can link the xml files, i can try from my end
Click to expand...
Click to collapse
if you need g955u bit5 unbrick solution
whatsapp+2348067369016

Found my Galaxy Tab 2 - doesn't boot!

I haven't used my Tab 2 (P5110) in a long time. I rely on my phone quite a bit instead.
Recently, I've been doing a bit of IoT stuff and though the Tab would make an excellent remote controller.
When I boot it, it shows the Samsung logo and goes no further.
Is there anything I can do to recover it, please?
I can get it into Odin mode, but I can't remember what can be done from there.
Can someone just steer me to a refresher, please?

Use recovery and do factory reset

KDMcM said:
I haven't used my Tab 2 (P5110) in a long time. I rely on my phone quite a bit instead.
Recently, I've been doing a bit of IoT stuff and though the Tab would make an excellent remote controller.
When I boot it, it shows the Samsung logo and goes no further.
Is there anything I can do to recover it, please?
I can get it into Odin mode, but I can't remember what can be done from there.
Can someone just steer me to a refresher, please?
Click to expand...
Click to collapse
You can flash TWRP from Odin and flash Custom Rom

drnightshadow said:
Use recovery and do factory reset
Click to expand...
Click to collapse
With apologies, if I knew what "use recovery" meant, I probably would have already done it.
Can you help, please?

hmd_msrf_k said:
You can flash TWRP from Odin and flash Custom Rom
Click to expand...
Click to collapse
I've downloaded twrp-2.8.5.0-p5110.tar.
The guide on the TWRP download site says I should install Odin and look for the "PDA tab or button". I have Odin 3.14.1 and the buttons are BL, AP, CP, CSC and USERDATA.
Elsewhere, here, I'm told to use AP. Is AP the correct / safe option?
Thanks.

KDMcM said:
I've downloaded twrp-2.8.5.0-p5110.tar.
The guide on the TWRP download site says I should install Odin and look for the "PDA tab or button". I have Odin 3.14.1 and the buttons are BL, AP, CP, CSC and USERDATA.
Elsewhere, here, I'm told to use AP. Is AP the correct / safe option?
Thanks.
Click to expand...
Click to collapse
Yes you can use AP, but why are you using too old recovery?.
New Version of TWRP is available and you should use that one

hmd_msrf_k said:
Yes you can use AP, but why are you using too old recovery?.
New Version of TWRP is available and you should use that one
Click to expand...
Click to collapse
It's the most recent one I could find as a .tar file. The more recent ones seem to be .img.
Download TWRP for p5110
Download TWRP Open Recovery for p5110
eu.dl.twrp.me

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It's not looking good for the good guys. Is this a dead loss?
Thanks.

Try different Odin, oldest is better

KDMcM said:
View attachment 5805273
Click to expand...
Click to collapse
Try Odin 3.07, it has PDA option, it may work

KDMcM said:
I haven't used my Tab 2 (P5110) in a long time. I rely on my phone quite a bit instead.
Recently, I've been doing a bit of IoT stuff and though the Tab would make an excellent remote controller.
When I boot it, it shows the Samsung logo and goes no further.
Is there anything I can do to recover it, please?
I can get it into Odin mode, but I can't remember what can be done from there.
Can someone just steer me to a refresher, please?
Click to expand...
Click to collapse
use old odin/heimdall and flash stock firmware

$cronos_ said:
use old odin/heimdall and flash stock firmware
Click to expand...
Click to collapse
Where can I get a heimdall Windows Binary, please?
Also, not sure where I can get stock firmware!
Thanks!

hmd_msrf_k said:
Try Odin 3.07, it has PDA option, it may work
Click to expand...
Click to collapse
Interesting. First try the progress bar went to about 80% and I thought it was working. Then it failed.
Second try ... waited for ages then failed outright.
Any other thoughts, please?

i
KDMcM said:
Interesting. First try the progress bar went to about 80% and I thought it was working. Then it failed.
Second try ... waited for ages then failed outright.
Any other thoughts, please?
View attachment 5807221
Click to expand...
Click to collapse
Interesting.
I have a couple of suggestions
1) Try to place the tar file in a folder without any spaces in the name in it and try to flash it again
2) Try to download the latest TWRP tar file from here https://dl.twrp.me/espressowifi/ and flash it with Odin 3.14.1
If none of this work, then I have no idea

KDMcM said:
Interesting. First try the progress bar went to about 80% and I thought it was working. Then it failed.
Second try ... waited for ages then failed outright.
Any other thoughts, please?
View attachment 5807221
Click to expand...
Click to collapse
use the latest odin, (in the latest it is called ap instead of pda partition)