I received my POETIC Affinity Series Premium Thin Fit case in the mail today. The case was packaged well and was received very shortly after I got my tracking number. I must say the buttons have a good feel to them when pressed using this case. I can feel the bottons and know when they are pressed. This is important to me. It is a lot better than the MoKo clear case I purchased recently. This case provides good protection all around which includes the back, 4 sides and front (small lip to protect the screen). The thin polycarbonate Spigen case I am currently use does not cover the top (headphone jack) or the bottom (the charging port) section of the phone. The 4 corners of this Poetic case has some additional protection from what I can see. It should help against some minor drops. The back is polycarbonate and the sides are TPU.
I also removed the cover a few times and noticed it did not scratch my phone which is awesome. The case can be easily removed if you want to clean the phone. This is important because I have owned other cases where I was scared to remove it. No one should fee this way.
I also slid the phone in and out of my jean pocket without any issues. I have used many different cases in the past and have found some to be very difficult to pull out of your pocket.
There are a two raised lines on the back of the phone which help prevent it from sliding around. I placed it on top of my laptop lid and began to open it. The phone did not slide off which was neat. I assume it will help keep the phone from getting scratched when placed on a rough surface. Ever placed your phone on the ground to tie your shoes?
Overall, I enjoy using this case. I recommend it to anyone who wants extra protection without the bulkiness. Please let me know if you have any questions. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wondering if I should get this in white or black. I have a graphite nexus so would the black stripes look bad? and I have two clear cases so I'm wondering if I should get another with the frost white. wish someone had photos with the graphite nexus 6p.
Sent from my Nexus 6P using Tapatalk
Get the black...try something new. Take a chance! =)
alobear said:
wondering if I should get this in white or black. I have a graphite nexus so would the black stripes look bad? and I have two clear cases so I'm wondering if I should get another with the frost white. wish someone had photos with the graphite nexus 6p.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Black case + graphite...
Sent from my Nexus 6P using Tapatalk
inneyeseakay said:
Black case + graphite...
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
lol my dude! nice thank you for the photos.. still deciding now haha.
Sent from my Nexus 6P using Tapatalk
I believe I said this in another thread, but couldn't they put their P anywhere else like above the S or below the N?
I got the clear, black one. It's the perfect case with that one blemish mentioned above.
Another review of the black case.
Things I like:
1. The grip on the sides and back while still remaining thin.
2. The black accents on the graphite phone.
3. Button response
4. Cutouts that work
5. Fit finish and build quality.
6. Raised area around the camera
Things I don't like:
1. Too many "tramp stamps". Is there a need for three places of branding.
The "P" on the rear covers the "NEXUS" text. Not cool. The other two I can live with.
2. I would prefer the FP sensor cutout to be smaller.
Overall I like the case and I'll use it as a daily driver for a while.
I have this case with my carbon fiber warp from slickwarp.
nthai said:
I have this case with my carbon fiber warp from slickwarp.
Click to expand...
Click to collapse
Well.... Post pics [emoji14]
Sent from my Nexus 6P using Tapatalk
TalonFangs said:
Hi guys,
Our production team is working on a new and improved version of the case by raising the "P" so it won't block the beauty of the Nexus brand as well as removing the 'affinity' on the side. Hope that helps. For those who received a case from us - we will be happy to send a new and improved version Please PM us or email us at [email protected]
Cheers!
Click to expand...
Click to collapse
If we purchased through Amazon should we contact you there or through the email you've provided?
Mine just came in and it looks and feels fantastic. Could do without the extra branding so I'll be contacting Poetic to get the revised version when it is released.
good combo on the frost:good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Sorry but... these are ugly, inelegant and cheap-looking. Why mar such an elegant, refined device like the 6p with a case for teenagers? Companies really need to move away from selling stuff like this. It looks like a UAG knock-off -- and UAG's are ugly monstrosities.
But, you know, different strokes for different folks. Live and let live and all that. Nice is such a broad term.
I hate to revive a dead thread, but I just wanted to drop my concerns in case anyone decides to buy or try a different case in the future. This case caught my eye since I am rocking the gold 6P. I ordered the clear Affinity case and at first, I was very pleased. After using it for approximately a month, I have noticed my phone wobbles a bit with this case on. Looking at the case on my 6P, I realized that the Affinity is about 1-2 mm taller than the actual phone... like there is a noticeable gap between my phone and the inside of the top of the case. This 1-2mm space is the cause of the case moving somewhat when on my 6P. The price is great for this case, but honestly, I would not recommend this case to anyone. I've also just noticed that the case somehow managed to get the NEXUS wording either burned into the case or somehow imprinted on the case. Maybe I just got a lemon, but this is a horrid case.
Related
Hey guys,
I don't usually post much as I mostly read the great things people post in this great community, but i had to make a review for this case for everyone. I have bought a case from this ebay user (dcmugen) since i got my mytouch. Then my Nexus, and now my G2. This case is awesome to me. Heres my review:
Feeling: These cases are made from some type of flexible material called Thermoplastic polyurethanes, or TPU. This plastic gives it a flexible feeling but solid. Hard to explain other than saying its a stiffer silicone case. Though it feels rubbery to the touch and the grip you get on it is great, It will slide in and out of your pocket without getting caught on fabric.
Fit: When I first looked at the case I made sure all the openings were there for the speaker, flash, light sensor, etc. Everything has a smooth opening and there is nothing that is left out. Took me less than 2 minutes to put the case together. Since the case is TPU, it doesn't seem to run any risk of scratching your phone once put on. Both sides of the case fit snug and once on, The phone is able to completely close without any space left open between keyboard/screen. When open, it leaved a little void but it is not noticeable.
Typing on it, takes a few times to get used to as the feel of the phone is a little different. The top row of keys are still accessible with no problems, but again take getting used to because of the touch of the new case.
The screen area is raised. This allows your phone to be dropped on the screen and not get hurt! The case also comes with a screen protector, though not like a Zagg screen, works quite well and I recommend it. The trackpad is easily accessable and is not hindered in any way.
The hardware buttons are covered and have a fully solid TPU button over them and are enclosed in the case. They still work perfectly and have had no issues with them.
Protection: Since I've had these cases before, I can vouch and say they protect quite well. I've dropped my phones on concrete, dirt, chairs, tables, etc, and they will not get scratched.
All in all, for the $5 I paid, I'm alot happier with this one, than the cheap hard plastic one i bought from Amazon that broke after a week of use. Highly recommend this.
Here is the link to the Ebay store
http://stores.ebay.com/DCMUGEN
I will post pictures of mine either later tonight or tomorrow morning.
Side note: the item is shipped from Hong Kong and takes a bit to get to you. Usually my cases get to where I am (New Orleans) within a full week. So be patient.
Pictures! Finally!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pics or it din't happen
A link would help too!
It wouldn't let me post pictures because of a 8 forum post limitation. This is my 8th post. Don't like spam but i dont want to randomly post in stuff i don't have interest in! Pictures are coming up in a few minutes.
Dude that's an awesome case. I've been waiting for something like that. I have an otterbox but i like to mix it up a bit. Is it tight fitting?
sent from my V I S I O N.
How hard is the case to take on an off? Some of the oem ones felt like i was gonna break my phone taking them off I just want one to keep on it at work.
Patrick: it is a very snug case and does not slide around while on the phone. I can type and have no problems with it.
ionic7: the case takes less than 5 seconds to take off. Does not feel like it will scratch your phone either. Thats one of the main things that bother me with hard plastic shell cases.
iixiom said:
Patrick: it is a very snug case and does not slide around while on the phone. I can type and have no problems with it.
ionic7: the case takes less than 5 seconds to take off. Does not feel like it will scratch your phone either. Thats one of the main things that bother me with hard plastic shell cases.
Click to expand...
Click to collapse
TY for the reply I had already ordered one with the mirror screen protector before you posted
Dude, please resize the pics.
Where do you buy this case? Thanks!
I would also like a direct link to the case you have, please! I want one.
sent from my V I S I O N.
I highly recommend their screen protectors too.
Their clear one is top notch.
Matte and other variations are expected to have a decrease in screen quality (as with any brand)
well i ordered one..and it came with a screen protector eventhough ive already got a couple. haha. right now im sitting with an otterbox back, with a front piece from a rubberized tmobile case. its nice.
Resized pictures. Sorry didn't notice they were huge as a brower extension i have automatically resized them to fit.
I know its late, but this is the one i ordered:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300499073448&ssPageName=STRK:MEWNX:IT#ht_2125wt_905
I just wish they would make a red one. I'd be all over it!
Looks like a great case, I have the otterbox and I like it but looking for something a little bit thinner. It adds a bit a bulk to the phone. Anyone used both and can give a comparison?
iixiom said:
I just wish they would make a red one. I'd be all over it!
Click to expand...
Click to collapse
There are some other G2 TPU cases with an argyle pattern on the back. These come in a few more color options, including red. Just do a search for "G2 red tpu case" on ebay. I have a clear one myself. These cases are great!
Troggie81 said:
There are some other G2 TPU cases with an argyle pattern on the back. These come in a few more color options, including red. Just do a search for "G2 red tpu case" on ebay. I have a clear one myself. These cases are great!
Click to expand...
Click to collapse
Now that is awesome. Thanks!
I ordered a case and over also got an otterbox right now. Ill let you know. I just wish the otterbox was more hard rubber rather than plastic.
Sent from my HTC Vision using XDA App
I did a little review with some additional pics here if anyone's interested: http://forum.xda-developers.com/showthread.php?t=885333
i got one and i love it
I am with you that I wish the otterbox had more grip to it. Looking forward to seeing your comparison.
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=306
Also comes in white for now
Here it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The plastic is very very very smooth like butter, but has friction between hard surfaces..so if you stick the phone in your hand with the case on itll slide if you move your hand back & forth..the edge of the case barely covers the phones curved glass, Im guessing to put it in and tale it out, has no play,and just seems like a good ol' hardcase
The more i handle it,the plastic should get grippier, ill update on that
No snap,crackle,pop noises from this case, put it on and done
+1 to a simple case, as my first case for the phone its clean&simple
Looks like the sides come up farther than on the ringke case. But looks good otherwise.
-EP
Just got the same case last night. I HATE using cases but this one is really nice. I would absolutely recommend one. Fits like a glove and feels great. It doesn't attract lint like some plastic cases.
Sent from my Nexus 4 using xda app-developers app
OP, could you please provide links, price and color options if possible thanks
Thanks for the pics. How easy is it to get on and off?
galaxys said:
Thanks for the pics. How easy is it to get on and off?
Click to expand...
Click to collapse
No problem taking it off, easy
Ordered mine just waiting is the edges pretty sharp??
ssnr said:
Ordered mine just waiting is the edges pretty sharp??
Click to expand...
Click to collapse
...no,
Add another thumbs up to the Diztronic. My first case from them I, that I decided to get based on comments here. So far the best case I've seen for the Nexus 4 (at least until a decent 2-component case like the Otterbox Commuter etc. comes along).
Nexus 4 Diztronic Hardshell Case Review
$9.99- Amazon Link
$9.99- Diztronic Link
Design
5/5
First of all, this case is EXTREMELY thin. It's only 1mm thin, making it 25% thinner than the original TPU case. The back has a non glossy Diztronic logo on it and a slot cut open for the camera and speakers. It is a bit slippery, but won't catch lint on it or attract finger prints. Unlike other shell cases, this one isn't hard to take in and out. However, you definitely want to take it out periodically to make sure debris doesn't get caught in it and scratch the case. The edges of the case just barely go over the screen making a bit of a "lip". The lip is barely there and you may be able to fit a screen protector on it. The buttons are left exposed on the case making pressing the power button and volume rockers very easy.
Protection
4/5
This case does a decent job at protecting the phone while still keeping a thin profile. The top and bottom of the case are left somewhat vulnerable, yet I understand how it would be tough to cover that part while making the case a "hardshell". Keep in mind this case is only 1mm thick, so I'm grading the protection based on the case's target audience.
Final Verdict
4.5/5
This may be the thinnest case to ever hit the market. At $9.95 you get a lot of bang for your buck; this is a high quality case made with premium materials. You can tell Diztronic took the time to make sure they got everything right. This case is so thin you won't even notice it while still giving you some protection.
Def the best case so far, for the money
Mod wanna merge this w/ my video review thread?
Nxxx said:
Mod wanna merge this w/ my video review thread?
Click to expand...
Click to collapse
Have copied your video and review post into this thread, closing your other thread as this was already available when you posted today.
Thanks
AvRS
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Nxxx said:
Nexus 4 Diztronic Hardshell Case Review
Click to expand...
Click to collapse
Hi, do you happen to have the similar Rearth Ringke and Nilkin Matte Hard Cover cases? If so, comparing all 3 in detail in one video would be AWESOME and help everyone in this forum, I think...
androidfoshizzle said:
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yep I am using it with a Seidio Surface holster. Looks and feels great! Aside from the speaker alignment, it's my fav case. It actually took me away from the official bumper because now I get a holster which has a smaller footprint when on my belt lol.
Mods should combine all diztronic related threads,.. TOO MANY OF THE SAME TOPICS
Sent from my Nexus 4 using Tapatalk 2
:beer:
Sent from my Nexus 4 using Tapatalk 2
Similar to Nillkin but I like the color more:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sells for $13-14 on eBay. I ordered one for myself.
http://www.ebay.ca/itm/Kalaideng-En...t=LH_DefaultDomain_0&var=&hash=item460bc6a413
card holders?
elty123 said:
Similar to Nillkin but I like the color more:
Sells for $13-14 on eBay. I ordered one for myself.
Click to expand...
Click to collapse
KLD Product Info said the Case is made by thin cast aluminum (Photo ~ Line B),
Can you please check out for us if it's true...?
I guess Wireless Charging & NFC Signal will be blocked by the aluminum.
How do you like the fitting?
Will it scratch the phone when install, take out..?
Thanks...!
Re: Enland Flip cover case
This would make me assume NFC will not work if it is lined with aluminum.
Sent from my Nexus 4
Uh60m Pilot said:
This would make me assume NFC will not work if it is lined with aluminum.
Sent from my Nexus 4
Click to expand...
Click to collapse
Also if wireless charging would work or not.
Re: Enland Flip cover case
I'm liking the brown..hmm
"Vanilla android >jail broken iOS>90" TV's"
i like the brown too,
ebay uk listing : http://www.ebay.co.uk/itm/KLD-Enlan...lePhonesCasesPouches&var=&hash=item35c35954e4
£8 delivered
was going to order the Nillkin, but will wait on reviews for this now!
Re: Enland Flip cover case
I heard the buttons are hard to access with the nillken case. Could you please tell us how does it feels with this one?
I am currently looking for a flip case too, and the best up to now seemed to be the nillken, even with that flaw, so if this one do not have the same flaw, I guess I have a winner
Sent from my Nexus 4 using xda app-developers app
JanusDC said:
I heard the buttons are hard to access with the nillken case. Could you please tell us how does it feels with this one?
I am currently looking for a flip case too, and the best up to now seemed to be the nillken, even with that flaw, so if this one do not have the same flaw, I guess I have a winner
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I think this is the best feature of the Google bumper. It incorporates keypressers so pressing the buttons is not as difficult as cases that have simple cutouts. Would love to see a flip case with buttons similar to the stock bumper.
So, elty123, 10 days since you started this thread. Have you already received your order? We want some insights!
Does anyone have this case yet? I'm thinking of getting the pink one, not many femine covers out for this phone yet.
Still waiting for this case. Not sure if this will work from wireless charger, but my HP Touchpad works with the Touchstone even with a case on. This should be similar I guess.
Finally got the red case. build quality is pretty good, and it is nice to touch. However, it doesn't really look like leather - more like.texture plastic. I think It would look better if it is not a bright peachy red.
I don't know if there is a thin cast aluminum inside, however the cover is pretty sturdy. It also doesn't seems to lower reception strength when the case is opened. I have no wireless charger to test.
elty123 said:
Finally got the red case. build quality is pretty good, and it is nice to touch. However, it doesn't really look like leather - more like.texture plastic. I think It would look better if it is not a bright peachy red.
I don't know if there is a thin cast aluminum inside, however the cover is pretty sturdy. It also doesn't seems to lower reception strength when the case is opened. I have no wireless charger to test.
Click to expand...
Click to collapse
Do you have some pictures?
Sent from my Nexus 10 using Tapatalk HD
So it's not more of a fuchsia or a hot pink? That's a relief, I liked that one. Many of these product photos use really bright light and make the colors brighter than pictured in everyday light.
elty123 said:
Finally got the red case. build quality is pretty good, and it is nice to touch. However, it doesn't really look like leather - more like.texture plastic. I think It would look better if it is not a bright peachy red.
I don't know if there is a thin cast aluminum inside, however the cover is pretty sturdy. It also doesn't seems to lower reception strength when the case is opened. I have no wireless charger to test.
Click to expand...
Click to collapse
What can you say about the cuts to access the buttons? I heard they are quite narrow in the Nilkin case, making it a bit hard to press them.
And this is the first flip cover I use, and sometimes the cover doesn't close completely.... is it a problem for other flip cover?
elty123 said:
And this is the first flip cover I use, and sometimes the cover doesn't close completely.... is it a problem for other flip cover?
Click to expand...
Click to collapse
Yep, pretty common.
The cut is not very clean (some residual plastic). Pressing the power is ok but the volume is a bit harder, probably because of the spine.
The texture of the cover is the same as the picture... just that it is a bit more shiny than I thought.
Also closing the cover seems to reduce signal strength by a few dBm. I can't really tell because the signal strength fluctuate a lot here, even without any case.
I ordered this case because it looks realllllly nice. I chose this over the nillkin because I wanted it in brown.
Sent from my Nexus 4 using xda app-developers app
Share the pics of your s5 cases
My case...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado do meu SM-G900F através de Tapatalk
Here are some of my cases:
Any cases you guys are selling? pm me if ever.
and people tell me i have too many cases (only 2)
felloffthetruck said:
Here are some of my cases:
Click to expand...
Click to collapse
I have the clear UAG 5th one over. But, oh man that Recon is nice! But, not $150 nice!
Toogoofy said:
I have the clear UAG 5th one over. But, oh man that Recon is nice! But, not $150 nice!
Click to expand...
Click to collapse
does the clear uag case get scratch easier than the other colors?
I had 1 case ****canned it. Don't use cases now, the manufactures go through so much design to make these phones fit and be slim it is almost a shame to put a case on it. I have dropped mine at least 8 times a few little dings, I wash it daily with soap and water and have yet to have an issue..
.lovemeicase.com/goods.php?id=74[/url] I just got this case and it is awesome, plus it doubles as a crime deterrent. I bought it off eBay though for only 25 I only knew about these cases because I had one for my iPhone 5.
davew41 said:
I had 1 case ****canned it. Don't use cases now, the manufactures go through so much design to make these phones fit and be slim it is almost a shame to put a case on it. I have dropped mine at least 8 times a few little dings, I wash it daily with soap and water and have yet to have an issue..
Click to expand...
Click to collapse
Soap is not good on the phone my friend.
Body Glove case. Really nice grip, anti microbial, and feels very high quality. Snugs the phone tight. Also have the ZAGG glass protector and it works fine with it.
Spigen Tough Armor Case - Gunmetal
This case provide good protection and is very compact. I dropped my phone once and it seemed to provide very good protection.
The buttons are easy to press and I actually like the buttons are flat along the edge of the case, so the chance to mistakenly press the buttons is less!
The cutouts are very good. There are 4 tiny bumps at the back corners that prevent the back from scratches and lift the speaker a little bit above the surface you placed on, so less damping to the speaker.
This case feels high quality made, easy to hold in the hand, and looks good.
Agreed
torr310 said:
This case provide good protection and is very compact. I dropped my phone once and it seemed to provide very good protection.
The buttons are easy to press and I actually like the buttons are flat along the edge of the case, so the chance to mistakenly press the buttons is less!
The cutouts are very good. There are 4 tiny bumps at the back corners that prevent the back from scratches and lift the speaker a little bit above the surface you placed on, so less damping to the speaker.
This case feels high quality made, easy to hold in the hand, and looks good.
Click to expand...
Click to collapse
I actually bought this case before I even bought the phone! It just gives the phone a rugged look and feel. With the phone by itself I didn't necessarily care for the look of it and knew I wanted a case for the S5. Couldn't be happier with this purchase. I even like the ridge edges it has and makes it easier to grip.
My newest spigen case in my collection.
Picked this up from a Cellaris kiosk in the mall.. Had one on my note 2 for the last year and it did an excellent job protecting my phone, so I went back and got one for my S5, I love the kick stand, but the one on my note 2 case seemed more durable than the one on my S5 cases.
They will usually mix and match colors to suit you, and I went with this combo, for the heck of it heh.
heres a link to their webpage, they have other colors at the kiosk, but you get an idea. most of the cases are cruddy, but the kiosks have otterboxes, kraken, and some other decent named cases.. this case set me back about $30.. worth it in my opinion.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC
cheers
I'm using the incipio teal/cyanish with grey. its kind of funny how small the phone is when I have to take it out (like 2 times now) but this thing is durable. I've dropped it and kicked it a few times and it holds up. love how it keeps my camera nice and tucked in. looks pretty cool too but it's built for abuse it seems.
These are my cases up to this moment. unfortunately, i can't use most of them since i'm using the OEM qi.
lordandroid said:
My newest spigen case in my collection.
Click to expand...
Click to collapse
Which one is that?
Sent from my SM-G900V using XDA Free mobile app
stricklerjosh said:
Which one is that?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Spigen Air cushion they have it in a series of colors
Sent from my SM-T700
Get 15% off RhinoShield, Because Bumpers are Back
Phone skins are really great to add style to any phone, plus they’re not expensive, but they provide minimal protection if you happen to drop your phone. On the other end of the spectrum are cases, which are generally more expensive but offer much more protection. Cases are bulky and they don’t let the beauty of your phone show through because they often have to cover all four edges as well as the back of the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That’s where CrashGuard by RhinoShield comes in. CrashGuard is essentially a bumper case, which means that it does not cover the back of your phone but only the sides (thus giving your device a more “naked” feel), but because of how it’s engineered, it provides more protection than most cases. CrashGuard is far superior to the bumpers of the past because it has been engineered to absorb impact. This is done by utilizing a proprietary polymer material that is far more shock-absorbent than plastic, and it also has a protective honeycomb structure within the bumper to disperse impact properly. In fact, within the honeycombs are compartments of pressurized air that act as airbags and deflect impact energy. If that sounds really elaborate, it is, and the net result is that you can drop your phone from a variety of heights (up to 11 feet) and if you have a CrashGuard bumper on the phone, you’re going to have a completely unmarked phone. If you want to see how incredible this protection is, watch this video from David Pogue where he does everything in his power to smash his phone by dropping it from a tall ladder.
Not only are CrashGuard bumpers durable, but they’re lightweight (with most of their bumpers coming in under 14 grams). They’re also pretty grippy thanks to the matte finish, and they come in a variety of colors. Another thing we really like about the CrashGuard line is the pricing: the Pixel XL is priced at $24.99, and you can pre-order a CrashGuard for the Pixel/Pixel XL.
Use discount code "XDAFTW" for 15% off until November 10, 2016. Check out the RhinoShield store here.
Thanks to RhinoShield for sponsoring this post and contest.
Where is the blue to match VZW true blue? Anyways, good bumper, true bumper, is always welcomed!
Any pictures of the bumper? How wide is it?
Any plans for clear and or orange?
This bumper added a lot of widness/tallness on the 6P and I imagine this will be the same. It will probably be manageable due to the Pixel's smaller size (XL included), but still... I'd like to see them make a more minimalistic bumper too.
When the winner will be announced
sargam44 said:
When the winner will be announced
Click to expand...
Click to collapse
It has been. Kyle G, entry #53259 won.
http://www.xda-developers.com/rhinoshield-contest/
Loved the crashguard on my Nexus 6P, so I might as well get this too for my Pixel XL
I just hope this Bumper is better than the crappy one Verizon sold for the Moto Z Force. That thing really was bad. The best bumper ever was the Nexus 4 I think, the all glass Nexus. That bumper was great looking.
I gave a Rhino arriving weds. Amazon has them before Rhinos website does
Sent from my Pixel XL using Tapatalk
I can say that this bumper is great, I have it already and it adds very little bulk to the device. I didn't like it in the 6P so much cuz it made it very wide.
Sent from my Pixel XL using Tapatalk
You guys should try it in person, it made my 6P horrendously large and hard to hold that I returned it.
Reviews looks pretty poor on the Pixel Xl version. Is there gonna be a revised 2.0 version?
Sent from my Pixel XL using Tapatalk
I've received mine today.
I was using a Spigen rugged armor before and the bumper feel so much nicer. It doesn't really make the phone wider and it feel good to touch the glass/metal
I've seen such mixed reviews on this bumper. Right note I'm using a cheap tpu car and it's ok but I'm looking for something more premium. My wife just dropped and shattered her iPhone today and I'm thinking I need to bump up my protection but I hate bulkiness
Smallsmx3 said:
I've seen such mixed reviews on this bumper. Right note I'm using a cheap tpu car and it's ok but I'm looking for something more premium. My wife just dropped and shattered her iPhone today and I'm thinking I need to bump up my protection but I hate bulkiness
Click to expand...
Click to collapse
Yeah, I don't get it. Some are saying maybe it's the first batch that is an issue. I have such a hard time taking the bumper off and I'm even scared that I would damage my phone putting so much force on it just to remove a simple bumper. It's such a shame cause I really like having it on my 6P and it feels real nice on the Pixel except for the tight feel. You can't even put a DBrand skin on it with the bumper cause it'll scrape off the edge.
I've reached out to them to see if there was an issue with the first batch. And if they say no, then I would not recommend them to anyone.
silentkry said:
Yeah, I don't get it. Some are saying maybe it's the first batch that is an issue. I have such a hard time taking the bumper off and I'm even scared that I would damage my phone putting so much force on it just to remove a simple bumper. It's such a shame cause I really like having it on my 6P and it feels real nice on the Pixel except for the tight feel. You can't even put a DBrand skin on it with the bumper cause it'll scrape off the edge.
I've reached out to them to see if there was an issue with the first batch. And if they say no, then I would not recommend them to anyone.
Click to expand...
Click to collapse
I can confirm its pretty tight.
I tried to remove it and I couldn't. I'm also scared that it will crack my screen from the pressure needed.
Even with the bumper in, I can still use it in my daydream so I won't bother to remove it at all.
IIIPowerIII said:
I can confirm its pretty tight.
I tried to remove it and I couldn't. I'm also scared that it will crack my screen from the pressure needed.
Even with the bumper in, I can still use it in my daydream so I won't bother to remove it at all.
Click to expand...
Click to collapse
So, I just decided to buy another one but from Amazon this time, which has mix reviews. This one still has a tight fit but not as bad as the one I pre-ordered from RhinoShield. Their response to me was to make a video and direct me on how I can get it off. Did not feel like putting that one back on because it's just that dam frustrating. Don't know how many people that had issue actually emailed them but I think they should take the review more seriously and actually test it themselves. At this point, I still wouldn't recommend it to anyone. Unless they want to test their luck on getting one that isn't so tight.
Those who are using this bumper, is there any problem with 3.5 mm jack? Heard that its difficult to plug in and out headphones and IEMs, is that true?
ithehappy said:
Those who are using this bumper, is there any problem with 3.5 mm jack? Heard that its difficult to plug in and out headphones and IEMs, is that true?
Click to expand...
Click to collapse
Mostly an issue with headphones with a 90 degree connector. My favorite IEM has one and I can't use it with the bumper. I am waiting on some adapters to remedy this but they will negate the benefits of the 90...
https://www.amazon.com/FosPower-Aux...6&sr=8-1-spell&keywords=Fospower+aux+adapeter
I guess their 15% off doesn't work anymore.... Damn, on the look for saving as I might need 2, me and gf.