I've seen that there already is a Q&A thread, but as it is not usable from XDA app I've created this one here.
Sent from my Taoshan using XDA
Xperia dead
My phone died after first reboot. No anwser from the device, dont work fastboot and no charge.
I think my Xperia is dead...
Edit:
I noticed the internal storage was separated and formated in two partitions and one of them was corrupted.
Maybe the motherboard died after that...
After that, I will try to use my phone insurance
PD: im so bad with english.
I suppose development of this rom should start fresh and fix bricking bug first.
this is info I got from ubuntu
Phone is somehow active but this is all I got
http://pastebin.com/YrGy6qHZ
Idk, last week when I am on Lollipop 5.1 (many rom) I cannot connect my phone to flashtool, no fastboot mode, flashmode too. Even I cannot charge my phone on offline mode.
I did not played with kernel. Only using stock kernel
And the solution is power button plus vol down or up (depends what you need)
Now I am om stock ROM
Related
Hi! My name is Petar and i new here at xda-developers. First of all I am not a developer and I do not have knowledge as much as you guys. I am here to ask for help. I have very very very BIG problem with my phone. It is Sony Xperia Miro. The phone is not expensive, but it is very very important to me. The phone was working perfectly untill i flashed cyanogen mod 10 JB mesina (i found mesina is the name for xperia miro). I know that Miro doesnt support JB officialy, but i found a video on You-Tube about un-official JB on Xperia Miro. Here is what i did:
-Rooted and unlocked bootloader using UnLock Root program (I verified the root with RootChecker app).
-Installed Clockwork mode.
-made a backup (nandroid).
-delete and wipe all data with clockwork.
-flash new rom ( Cyanogen mod 10 JB Mesina).
-after flashing completed 100%, the phone turned off ( the phone was fully 100% charged before doing all this).
-I tried to turn on the phone but i only get a single vibration (No led, No screen working, No sound).
-I tried to connect the phone to PC and restore original ICS using Sony PC Companion, but my PC doesnt detect my phone because unlocked bootloader.
-So i put the phone on charge for 6 days.
-Yesterday i took the phone off the charge and pushed it on. The phone didnt turn on, but i didnt even get a vibration only now i get is blinking RED LIGHT at top of the phone.
-I contacted you !
I read thousands of posts here on xda and everywhere on Google about fixing this. But I only found tutorials and fixes for other Xperias ( Z, S, J etc.), but not for my cheap miro ... Please guys i need to fix my phone really soon, please in name of the LORD , help me.. Thank you ):
you downloaded mesona cm10 zip file right? there is one boot.img file inside it, try to flash it first(using flashtool..search how to)
put cm10 for mesona on your sd card and after flashing boot.img go to recovery and flash the rom.
in case your pc does not detect your phone you should try on some other pc.
red led means your phone is not dead yet.
please step by step
c4cyro said:
you downloaded mesona cm10 zip file right? there is one boot.img file inside it, try to flash it first(using flashtool..search how to)
put cm10 for mesona on your sd card and after flashing boot.img go to recovery and flash the rom.
in case your pc does not detect your phone you should try on some other pc.
red led means your phone is not dead yet.
Click to expand...
Click to collapse
Thanks for the reply man..but please explain to me step by step how to do all that...
The Simplest way is to download Flashtool and Flash the stock firmware you can find in the General Section here on the Threads, after that see the magic,
If it works hit thanks bro !
Dear devs.
I hope i'll not be disappointed on xda.
My issue is that i've flashed a zip which claims to be a boot logo changer using pure cwm. Soon after that everything stops working. Only red led notification is showing after connecting charger or to pc. I've posted this thread after researching every possible fix but no one z working. My pc also recgnize my xperia c as unidentified device. Plz help and reply asap if you've a fix. Once again i'd like to tell that i've tried every possible fix without any sucess. Thanks in advance.
Omg...i dont understand why do u guys need to change the boot logo? To see something else when powering it on once a week? Im sorry, but its not clever.
Flash stock rom with pc
Sent from my NOTE III SM-N9005 using XDA Premium 4 mobile app
lostangeles said:
Omg...i dont understand why do u guys need to change the boot logo? To see something else when powering it on once a week? Im sorry, but its not clever.
Click to expand...
Click to collapse
I was just looking for some modification, i didn't realized that i'll end up having na dead android
zishu said:
Flash stock rom with pc
Sent from my NOTE III SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried flashing stock tft from Wmshua toll however it only detects my xperia c in odin mode, not in flash mode.
Sony SUS not regognizing my handset. I've tried every possible hardware key combination without any sucess.
I think it's time to get going to a Xperia service centre
Btw thanks for your reply.
abhaykush said:
Dear devs.
I hope i'll not be disappointed on xda.
My issue is that i've flashed a zip which claims to be a boot logo changer using pure cwm. Soon after that everything stops working. Only red led notification is showing after connecting charger or to pc. I've posted this thread after researching every possible fix but no one z working. My pc also recgnize my xperia c as unidentified device. Plz help and reply asap if you've a fix. Once again i'd like to tell that i've tried every possible fix without any sucess. Thanks in advance.
Click to expand...
Click to collapse
According to me you lost your phone and it will not run without a new motherboard, If there is a fix for this issue then let me know.
Since is not a removeable battery try this. When the Sony service asks for pressing the down volume button do this. Keep pressing power+up volume button and when the screen goes totally black press the down button before vibrates. Check your pc if is installing smth new. Do it this a few times untill the drivers installs.
Sent from my C2305 using XDA Free mobile app
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I did the same thing like you and had same issue.
Unfortunately, we cant use Flashtool/ SUS/ Perfect Flash to unbrick because there have no driver for our xc.
So, I sent back to SONY yesterday.
Fix your problem using this way
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
iSiddharth said:
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
Click to expand...
Click to collapse
this method doesnt work when you flash a rom for a different device like i did i already order a new motherboard for my xc. this only will solve it...changing motherboard.
And by the way if Red Light is shown then it is Soft Brick and you can very easily repair it. If that light is also not there then you can say that it is a hard brick.
my xperia L c2104 is death , but no for so long i guess , an cyanogenmod 12.1 crash kill him , the phone cant turn on ,cant enter to flashmode and fastmode, when i connect the usb to the computer it appears but like this QHSUSB_DLOAD thats the Boot Repair mode
but i cant find the boot of c2104 on internet to repair the boot, if someone can help me ,really thanks , many people falls in this HardBrick :C
yup this means hardbrick, at this moment no way how to fix this only replacing motherboard
files we need to revice our device have only qualcomm
How the **** did that happen?
same situation, but mine still able to open flashmode, fastboot, and recovery. but after trying to fix things by my self (since no help came, and no luck searching forum), well, finally my xperia l rest in peace 2 days ago. mine have problem with superblock btw.
keep strong my friend, maybe it's time to move up to updated phone.
time_san said:
same situation, but mine still able to open flashmode, fastboot, and recovery. but after trying to fix things by my self (since no help came, and no luck searching forum), well, finally my xperia l rest in peace 2 days ago. mine have problem with superblock btw.
keep strong my friend, maybe it's time to move up to updated phone.
Click to expand...
Click to collapse
you can reach flashmode and recovery?
well then you could boot from external sd
Sent from my Xperia T using XDA Free mobile app
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes