Yesterday i installed a dpi changer on my galaxy tab 2 10.1. I changed the setting to the 220. i got a warning saying that if the phone started to do a loop boot i would need to swap back the original file.
Once the phone rebooted everything was ok, the phone got a new look. however, once i screen swiped the screen to unlock it i started getting numerous messages, keyboard not working, touch wiz not working. none of my apps were showing.
I tried looking for the back up file from the dpi app but couldnt find it. last resort i factory reset my phone, but still has the same screen look as after the dpi change and also gives the same errors.
does anyone have any ideas on how i fix this problem. do i need to reinstall the android os or is there another way, like downloading the original screen setting and installing it again.
thanks in advance for anyones comments, much appreciated.
Related
So after searching for solution for days I felt that now its the need to start a new post for new occurring problems in Samsung sl gt-i9003. Wile changing the chassis of my phone I accidentally broke the white wire which is known as board connector or Samsung flex wire. Once I got the shipment I fixed my phone, but a new issue came forward. I used Odin to flash rom with the latest rom and since then my phone keeps on rebooting and even if then it reaches setup screen where you select language then touch screen becomes unresponsive and I keep on seeing "process system not responding". So I flashed my phone over dozen times, even went back to foryo but nothin helped. Somewhere it suggested that try rootin your phone and then go to recovery mode and wipe cache, wipe dalvik cache and then fix permission, and reboot, and it worked. Touch screen started
Working so he doubt about sensor going bad is gone. So something about the dalvik cache and fix permission. But then my wifi gives error when I switch on, so I tried *#*#526#*#* to load driver but always came with unsuccessful
So I finally ran out of options and I am writing this post asking you all to help
This is my current config
PDA I9003XWLF2
PHONE I9003XXLE4
CSC I9003XXLF1
I am using Bagaria for rooting. Rest all rooting not working on mine. The software is poland's version of Samsung SL Gt i9003. With the new software updates the old rooting packages are giving glitches so I am open for new suggestions. Please suggest steps too. I tried remix ics, miui, ethenonx, etc to make wifi work. Only trouble, too much battery consumption in miui and rest has too much load on ram which is making wifi glitch.i am not a novice but at this moment I ran out of options and clues. I need my phone to start without rooting it. Even if I have to root every feature should work then.
Thank you
looks like none of you have any solution to the problem posted
i thought android gurus might have some trick saved up their sleeves
try flashing dhirus cm10 rom
Hey people.
I have this bad thing , happened to my phone(rooted).
I tried to change my font, of my device(I didn't use ''font installer'', because it didn't work ...). I tried to replace the font ttf files with mine, I did it, but minuted later, it just started acting strange.
It like restarted my launcher. But the launched couldn't start. I went into recovery and did factory reset. I started up my phone, everything was fine, but again, after minute of use, it did the same thing with stock launcher.
Help please!
I have Galaxy Mini
Rooted, with stock rom.
Alright, so yesterday I tried to root my tablet (Samsung Galaxy Tab 3 10.1 Wifi) yesterday by installing TWRP and then loading the Superuser zip found in their link in the play store. It worked fine--I had root access and all was going fairly well. I then tried to make a small tweak to the build.prop file by changing ro.build.version.codename from REL to L.
When I rebooted to apply that change, I could not start up, so I did a factory reset (not a big deal, no essential files on there). It then booted fine, but when I reinstalled/updated all my apps, the Google services were crashing like mad. So I reverted the build.prop file back to REL and again it would reboot, so I did another factory reset and all was good; the Google apps were fine.
Well I was still rooted and I wanted to take advantage of all that time I spent doing it, so I downloaded the bootanimation zip found on this thread and replaced my bootanimation.zip that was already on there. I restarted to see the animation, and this is when the real nightmare started happening. I could not boot now at all.
I did another factory reset, and still it wouldn't boot. I then used TWRP to do a full reset, and still nothing. I did an advanced reset and somehow managed to delete the operating system files (I have no idea how), causing TWRP to say that no operating system was installed. I still couldn't boot, of course.
Finally, I decided I had had enough of this rooting ****. I searched all over the internet looking for a North American version of my stock ROM, and finally found one posted on this forum post. I wouldn't normally trust any random file, but I was getting desperate here. I used Odin to flash that ROM, and there were no errors. Now when I go into recovery, it gives me stock and not TWRP, so I know that was probably successful.
However, I still cannot boot. I get stuck on the screen that says Samsung Galaxy Tab 3, which sometimes goes away and then comes back. I can't send it in for warranty, because it still says "custom" in the recovery mode. How can I fix this? any ideas?
I really want my tablet back :crying:
Im on TWRP recovery, and in the recovery menu i accidentally wiped internal sd, and now when i flash a new Rom, after it installs an i get through the typical new phone start up process, i get a message that says, Unfortunatley system ui has stopped, and another one that says htc dot view has stopped. And then when i get to my home screen i have no Status bar or navigation bar (soft keys) and my homescreen is just a black background. I can still access my apps but cant go back because there is no soft keys. I went into my settings, to my apps, and when i went to system ui to try clearing the cache its greyed out and saying "computting" forever. What do i do? I have a htc one m8 T mobile US with unlocked bootloader and S-On.
I've already tried factory resetting and flashing a new rom and i keep getting the same results. Please help!
raine_raine7 said:
Im on TWRP recovery, and in the recovery menu i accidentally wiped internal sd, and now when i flash a new Rom, after it installs an i get through the typical new phone start up process, i get a message that says, Unfortunatley system ui has stopped, and another one that says htc dot view has stopped. And then when i get to my home screen i have no Status bar or navigation bar (soft keys) and my homescreen is just a black background. I can still access my apps but cant go back because there is no soft keys. I went into my settings, to my apps, and when i went to system ui to try clearing the cache its greyed out and saying "computting" forever. What do i do? I have a htc one m8 T mobile US with unlocked bootloader and S-On.
I've already tried factory resetting and flashing a new rom and i keep getting the same results. Please help!
Click to expand...
Click to collapse
I got the same problem too on my lenovo A316i :crying: pls. help!!
I had the same issue when using TWRP; took all of the steps mentioned below without success. I then flashed stock recovery and wiped - this fixed it
If system ui stoped and your phone running just copy the apk of system ui and replaced it system ui apk use a root explorer or every thing go to device/system/app then find the system ui apk then replaced it or device/data/app lib/and find again the apk and then replace it .......... If your system ui stopped and u cannot used your phone follow this steps go into 'stock' recovery mode and choose wipe data/factory reset that's it
My HTC one M8 sprint all of a sudden, after installing xposed came with this error: "Unfortunately, System UI has stopped. I cannot shut it down and my battery is inbuilt. I cannot even reboot. in fact, i cannot do anything. please help, what is or are the options I have. I am desperately in need of help. Thanks to any God sent in advance.
I recently got a system update in my Realme 6pro device and after that yesterday I just changed the homescreen from drawer mode to simple mode and the moment I changed, my phone ran into this problem. My phone's screen is continously getting on and off and I cant perform any activity on the phone. I have attached a video of it please take a look and help me with a solution to it.
Devansh0 said:
I recently got a system update in my Realme 6pro device and after that yesterday I just changed the homescreen from drawer mode to simple mode and the moment I changed, my phone ran into this problem. My phone's screen is continously getting on and off and I cant perform any activity on the phone. I have attached a video of it please take a look and help me with a solution to it.
Click to expand...
Click to collapse
Flash your stock firmware.
Or
Boot to stock recovery and factory reset the device.