Related
Please could someone help ! I'm trying to unlock my XT1032. I have the correct Sim-Unlock (network unlock) code from my old telco, but... it won't work because the phone is rooted, bootloader unlocked (S-ON) running CM13.
I figured that returning it to a stock build would allow me to unlock the phone, then I could re-root and return to CM13 on my new network.
However..... there are about a dozen guides on returning a Moto G to stock and the first one I tried left the phone stuck on the 'Warning: Bootloader is unlocked' message. Since then, I've tried several other guides and have got nowhere fast. I've been on this for four hours now and the only thing I seem to be able achieve is to get TWRP or CWM recovery on there by flashing from fastboot. Every other image I try either gives 'preflash validation failed' messages, sticks on the Bootloader Unlocked screen or gets it stuck in a bootloop!
I just want to switch networks... Why is this so bloody difficult ?
What Firmware did your XT1032 originally come with? or which Carrier?
Kitkat I think, and it's Tesco (UK).
I subsequently did the OTA update to Lollipop and then.... WHOAAAAA.... hold on... it's booting !!!
I don't know how, or what I've done to get this far, but the only thing I can think of that's changed is that the battery is now at 100% charge. It appears as though it's successfully flashed the 5.1 untouched ROM from http://forum.xda-developers.com/devdb/project/?id=7981#downloads
But, I've tried flashing that loads of times this evening and it's failed everytime.
Having said that it's booting, it's sitting here on the Motorola logo - and it hasn't got that far in the last five hours.... I'll be back shortly !
Update: It worked ! It completed the boot, I put the new SIM in, it asked for the unlock code and this time it worked OK. Now I'm tackling putting CM13 back on it. I think I'll stick with TWRP rather than CWM recovery, as long as TWRP can handle the automatic updating for the CM nightlies.
I have no idea what went wrong there - maybe it was just that the battery had to be at 100% ?? Who knows... Thankfully I doubt I'll be tackling that again !
I don't know if things have changed, but I would be careful with OTA Updates in CM. People have hard-bricked (phone is effectively destroyed) applying updates in this way. I also suggest you avoid official Motorola updates, rather use the factory firmware images available here: (which already include the content of OTA Updates)
[INDEX] Moto G [Falcon][Peregrine] Factory Firmware Images​
Thanks for replying anyway mate. In the end, it's all good now. Unlocked and back on CM13 and on my new network !
Ahhh... not so good after all. The phone reboots every time you try to uninstall an app. I've tried flashing back to CM12.1, the latest stable release, and it does the same, so I've obviously screwed something up along the way.
Could someone help me flatten this thing completely and get it working normally please?
I've tried reflashing loads of times, even tried Cyanogen Recovery instead of TWRP but nothing I do gets rid of this reboot problem.
Can anyone assist please?
OK, so I've followed the procedure detailed here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 and flashed the Untouched 5.0.2. EU Stock ROM successfully, but it still reboots when you try to uninstall any app.
Whatever it is that's causing this is not getting overwritten by the flashing procedures I'm using is it ?
HELP !!!!!
@aneng64 - You have not done what I told you to do. Read my post again.
Yes I did... and I still had the same problem. It was only once I stopped trying to flash zips from TWRP and used mfastboot to flash the whole set individually (non-hlos, motoboot etc) that I got it to behave. The issue, incidentally, seemed to be the same one mentioned elsewhere here that also causes settings to crash when you try to go into settings, security.
Once it was stable with a stock ROM, I was able to flash CM13 again and it's now sorted. Thanks for your help anyway.
Hello people of XDA!
I know that this thread may be repetitive, but I unfortunately didn't find any help in all threads regarding GSII's NAND r/w problem.
So in short, I will explain what happened to this device
I bought this GSII brand new as my 1st flagship device, and I am kind of sentimentally connected to it, if not I would've thrown it in trash a long time ago.
So here is the thing
I had stock firmware on this device (4.1.2 JB) , and after some time decided to flash CM 11 on it when it came out, and had it on my phone for 4-5 weeks but I instantly noticed that my device was overheating with that ROM so I decided to get back on stock firmware, unfortunately thing is that i flashed android 4.0.3 ICS (Movistar Mexico) then my device got bricked (I had a really bad knowledge back then about roms and things that I SHOULD and SHOULDN'Tdo), anyway I tried fixing the mess I made by flashing my original android 4.1.2 JB rom (Telenor Serbia) hoping that will solve my bricked device, but unsuccessfully. Then I tried flashing again standardly for maybe 4-5 times with no success and decided to explore more functions that odin provides, so I checked NAND erase all last time I flashed and I guess made a huge mistake, but still I couldn't boot my device, I tried hard resetting it (I lost my power button while replacing the screen of my phone, so I couldn't boot into recovery to check if device is soft bricked or really hard bricked, but download mode works just fine). Still I tried, I flashed custom kernels hoping they would fix this brick but nothing happened, I would really like to get this thing working again, I had no success at finding a good mainboard to replace the old one, and doing it in official repair shops and non-official ones costs more than the phone itself. Sorry for asking the same old question I guess but I would be really thankful if I could get this working again!
I've only had this phone for a few weeks, bought new from Target. It is a US BLN-L24. It originally was running Marshmallow but I updated it to Nougat via the official updater (BLN-L24C567B360).
The first time I got this issue was when I rooted the stock ROM with Magisk. I later installed Apps2SD Pro (for linking apps to 2nd partition on SD card). It mounted this partition, I rebooted, the device then asks for a PIN# which I didnt have and never set. Afterwards I rebooted to @OldDroid's TWRP, it couldnt mount data partition, some error about not being able to find the crypto footer. I then used the dload method to rollback to MM, then updated to Nougat again, and rerooted, this time with systemless SuperSU instead..
Then eventually everything went fine for awhile, but it happened again. So I decided to try a custom Nougat ROM. I went with Resurrection Remix 7.1.2. And then.....it happened again. This time I had rooted with Magisk. I tried yet again, but with SuperSU. And yet again with Phh's Superuser.
I've also tried AOKP, AOSPA, LineageOS, OctN, all Nougat, the issue returns with all of them.
So, no matter what root solution I use, the encryption issue eventually returns. Magisk, SuperSU, and Phh are all supposed to disable data partition encryption. But it seems they aren't.
What I've tried so far:
1. 3 different root solutions, same results
2. Formatting data and wiping all partitions in TWRP immediately before installing a ROM zip, which is supposed to remove the encryption
3. A custom kernel (CycloX)
4. Formatting my MicroSD, as exFAT, every time I check it for errors in Windows 10 corruption is found and repaired, but it always returns. I had initially thought that the encryption might be related to the SD
It has happened numerous times, on different ROMs including stock, and MM/Nougat, and with different root solutions. I know when it happens, I get stuck on the boot logo forever. TWRP reports that data can't be mounted. At one point my phone randomly rebooted into eRecovery and I was shown a message stating that data partition was corrupted. Sometimes it happens as little as 15 mins after booting into a freshly installed ROM, sometimes it takes a few days, but it always comes back no matter what. So far several dozen times.
I'm at a loss as to what is the cause. It could be a hardware defect, a firmware defect/bug, or something I'm doing wrong/missing. So I really have to ask if others are experiencing this too, and what you did to resolve it, I'm sure I'm not the only one. Please provided detailed steps. This is driving me crazy. I bought the 6X to replace my Samsung Note 4 which recently died after 3 years of loyal service. I'm liking this phone alot, it's very powerful, but this is killing me.
If anyone can help then I would greatly appreciate it. If I can't get this resolved then I'll just sell the phone on Craigslist after returning it to stock.
Thanks!
C'mon guys, really need some help here. I know I can't be the only one with the encryption issue, since the 6X is encrypted by default.
AnonVendetta said:
C'mon guys, really need some help here. I know I can't be the only one with the encryption issue, since the 6X is encrypted by default.
Click to expand...
Click to collapse
Actually I think you are the only one with this issue. Flashing Magisk alone will remove auto-encryption. But then you already flashed custom roms.
After 4 more days of testing, I still haven't been able to find a solution. The issue has been less frequent ever since I started using the stock charging brick that came with the phone, before I was using a slightly larger LG brick, I thought it would charge faster. But maybe it was supplying too much power, which partly explains why the phone would sometimes act erratically on the battery charging screen while turned off.
But it's not solved, sometimes I still can't boot, it just gets stuck on the ROM boot logo, makes no difference whether it's stock or custom ROM. I can get past the "your device is unlocked" part though.
I no longer think encryption is the biggest part of the issue, I think the /data partition is getting corrupted. This partition uses the F2FS filesystem by default. The last few times I got stuck I booted into TWRP. But instead of doing a factory reset, I used the repair filesystem option on /data, TWRP says it repaired, then the ROM boots fine. But the problem always comes back. It seems to happen most frequently when I completely power off the device then turn it back on, but not every time.
Today I called Huawei customer service and explained, though I didn't mention TWRP, root, etc. They want me to follow up on an email by sending pics of the phone, then mail it to them so they can diagnose and fix the issue. I just restored the stock MM firmware and made sure the bootloader was locked. It was just placed it in the mail, so I'll wait until I get it back then test further to see if this happens again.
AnonVendetta said:
After 4 more days of testing, I still haven't been able to find a solution. The issue has been less frequent ever since I started using the stock charging brick that came with the phone, before I was using a slightly larger LG brick, I thought it would charge faster. But maybe it was supplying too much power, which partly explains why the phone would sometimes act erratically on the battery charging screen while turned off.
But it's not solved, sometimes I still can't boot, it just gets stuck on the ROM boot logo, makes no difference whether it's stock or custom ROM. I can get past the "your device is unlocked" part though.
I no longer think encryption is the biggest part of the issue, I think the /data partition is getting corrupted. This partition uses the F2FS filesystem by default. The last few times I got stuck I booted into TWRP. But instead of doing a factory reset, I used the repair filesystem option on /data, TWRP says it repaired, then the ROM boots fine. But the problem always comes back. It seems to happen most frequently when I completely power off the device then turn it back on, but not every time.
Today I called Huawei customer service and explained, though I didn't mention TWRP, root, etc. They want me to follow up on an email by sending pics of the phone, then mail it to them so they can diagnose and fix the issue. I just restored the stock MM firmware and made sure the bootloader was locked. It was just placed it in the mail, so I'll wait until I get it back then test further to see if this happens again.
Click to expand...
Click to collapse
Hello, can you help me? I have the same model BLN-L24C567B360. I got this phone today and updated today as well right out of the box. My problem is that I installed TWRP 3.1.1.0 Berlin version for this phone and it doesn't work at all. Now I have my phone working ROM but with no recovery option. Can you give me a link with the files I need? I was thinking on putting back the original recovery.img file back but unfortunately I never thought on doing a backup of it. I read on the top that you have all original stock files. Thanks
@jaimejdv: Are you having the same encryption/corruption of the data partition that I'm getting? Because if not then you should start your own topic.
If you have installed the correct TWRP by OldDroid, via fastboot, then there is no reason it shouldn't be working. Instructions are available in other topics, I won't list them here.
There are some Marshmallow downgrade files on Huawei's website, go search for them and follow the instructions in the PDF they provide.
And BTW, I really don't appreciate you trying to hijack my topic. I understand you need help, but I posted this topic because I'm specifically having trouble with encryption/corruption. This isn't meant to be a generalized help thread.
Right now Huawei has my phone, I'm waiting on them to fix and return it so I can do more testing. If it doesn't work as expected, I'll be selling it on Craigslist.
AnonVendetta said:
@jaimejdv: Are you having the same encryption/corruption of the data partition that I'm getting? Because if not then you should start your own topic.
If you have installed the correct TWRP by OldDroid, via fastboot, then there is no reason it shouldn't be working. Instructions are available in other topics, I won't list them here.
There are some Marshmallow downgrade files on Huawei's website, go search for them and follow the instructions in the PDF they provide.
And BTW, I really don't appreciate you trying to hijack my topic. I understand you need help, but I posted this topic because I'm specifically having trouble with encryption/corruption. This isn't meant to be a generalized help thread.
Right now Huawei has my phone, I'm waiting on them to fix and return it so I can do more testing. If it doesn't work as expected, I'll be selling it on Craigslist.
Click to expand...
Click to collapse
You can stop crying now, I won't be using your "topic" anymore. I just replied to you asking for files that you already have.
And BTW, I don't need them anymore but thanks anyways.
Yoooooo did Huawei do anything yet?
I just got the phone back in the mail this morning from Huawei, after waiting about 3 weeks. And.....THEY DIDN'T EVEN FIX IT!!! They sent it back unrepaired, with a note saying it wouldn't be fixed because their technician found water damage. But I'd say that's just a generic canned excuse to not fix it. I bought this phone very recently from Target, I never exposed it to liquids at all. I'm very careful with my phones, I have 3 old ones for over 5 years and they still look good and work fine. I don't do stupid crap like using my phone in the rain, dropping in sink, etc.
So, I unlocked the bootloader, flashed TWRP, then installed Resurrection Remix and Magisk. I did no other changes whatsoever. And sure enough, within 6 hours it was just hanging up forever on the boot logo. I went back into TWRP and got the same error about the data partition not having a crypto footer. I can repair the partition in TWRP without factory resetting, and the issue goes away for awhile, but eventually returns.
At this point I'm really angry, having spent around $230 for this phone. So I'm just going to reflash it to stock firmware and sell it on Craigslist at a loss. I don't think I'll ever buy a Huawei phone again, not just because of this phone, but also because their customer service is crap and can barely speak English, as well as their failure to honor the warranty.
I don't know what phone I'll get next, I'll probably shell out for a new ZTE Axon 7 on Amazon, with a warranty. Which also has the added advantage of having better specs than the 6X.
Oh well, life moves on.....
AnonVendetta said:
I just got the phone back in the mail this morning from Huawei, after waiting about 3 weeks. And.....THEY DIDN'T EVEN FIX IT!!! They sent it back unrepaired, with a note saying it wouldn't be fixed because their technician found water damage. But I'd say that's just a generic canned excuse to not fix it. I bought this phone very recently from Target, I never exposed it to liquids at all. I'm very careful with my phones, I have 3 old ones for over 5 years and they still look good and work fine. I don't do stupid crap like using my phone in the rain, dropping in sink, etc.
So, I unlocked the bootloader, flashed TWRP, then installed Resurrection Remix and Magisk. I did no other changes whatsoever. And sure enough, within 6 hours it was just hanging up forever on the boot logo. I went back into TWRP and got the same error about the data partition not having a crypto footer. I can repair the partition in TWRP without factory resetting, and the issue goes away for awhile, but eventually returns.
At this point I'm really angry, having spent around $230 for this phone. So I'm just going to reflash it to stock firmware and sell it on Craigslist at a loss. I don't think I'll ever buy a Huawei phone again, not just because of this phone, but also because their customer service is crap and can barely speak English, as well as their failure to honor the warranty.
I don't know what phone I'll get next, I'll probably shell out for a new ZTE Axon 7 on Amazon, with a warranty. Which also has the added advantage of having better specs than the 6X.
Oh well, life moves on.....
Click to expand...
Click to collapse
Sorry to hear you had such a bad experience with them. Pretty crappy that they used a lame excuse like water damage to deny responsibility in fixing the issue.
I agree with you, I will never buy Huawei again. The phone itself is great but the audio is so so bad Im trying to sell mine at a loss as well but no ones calling so Im tinkering with it again. I would be absolutely livid if I spent the money on one of the flagship Huawei phones. Oh well live and learn I guess, at least the 5T comes out sometime next month.
I have tried quite a few ROMs, and all ended up going back to stock firmware because they wouldn't boot. I know I have to format data, and some ROMs ask you to change the data partition as f2fs.
Still, I think that there may be no ROMs that currently work for the US variant. One guy said LOS 13 worked, but when I flashed it, it failed. If someone has gotten it to work, can you please post as many steps as you remember on how to get it work?
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
RedSkull23 said:
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
Click to expand...
Click to collapse
Thanks, but wouldn't there be more issues down the line with a debranded phone? What if I soft-bricked my phone, it seems like it'd be really hard to restore? Has anyone actually ever done this on a BLN-L24?
Hello all,
I too am having issues with flashing roms to this device, US variant (BLN-L24). In my particular case, the rom boots up (EliteRom v7.1) and will actually function. However, wifi does not work, as well as I have no sound whatsoever. Youtube also will not play, nor will any videos, which I'm guessing is tied to whatever issue is with the sound. I have flashed multiple times per the step by step instructions, as well as following the Youtube video, all with the same result over the last few days. At this point, my phone is effectively useless to me, though cellular data does still work, just no calls can be answered. Anyone have any suggestions I might be able to follow? Also, even my TWRP backup that I made before installing the rom will not restore at this point. Any help is appreciated, thanks.
Jessooca said:
You must be missing a step or something, because [Elite ROM][EMUI 5.1] Elite ROM v7.1 for Honor 6X by HassanMirza01 works on the L24 us variant without issues, I have none.
Perhaps go back to stock and start over. I haven't had any issues with his rom and I didn't do anything more than what's needed to root/install twrp and flash the rom per his instructions.
Click to expand...
Click to collapse
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
i4ybrid said:
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
Click to expand...
Click to collapse
On one of the attempts that I did for installing, I installed the patch and it put me in a boot loop. Maybe not installing the patch can help you?
I cant get anything to work for the US version. Sure stuff boots but some of it is just broken. On octOS i am unable to use root unless i switch supersu to automatically grant root to apps. I cant get root access by using prompt because nothing pops up. On crdroid i have the same exact issue. Id rather have the prompt than allow any app root access without my knowledge. With ELITE ROM my first boot brings up a home screen with no keyboard. It completely skips any kind of setup screen. I can get the setup screen by flashing a keyboard from an aroma gapps installer but then i lose google services. The US version also seems to be forgotten as for most roms you wont see it anywhere under supported lists.
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
code_name_duchess said:
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
Click to expand...
Click to collapse
It really sucks that nothing seems to work. Ive tried flashing using multiple recoveries and ive tried all kinds of flashing to fix issues with the ROMS. Nothing helps. If anyone has successfully gotten a ROM fully working on BLN-L24 they need to tell people exactly what they did step by step.
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
TurtlePwr82 said:
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
Click to expand...
Click to collapse
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing. Most recoverys say Open Kirin Edition when booting. What confuses me is why we need to debrand to get the ROMS to work. If the phone pretty much run on the same hardware then why is L24 having so many issues? Why are the devs not testing on these devices?
BakedOnSomeSour said:
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing
Click to expand...
Click to collapse
Right, that's what I was thinking. For any phone I've ever rom'd, there was always just one twrp that everyone worked from.
Edit: found this while looking through the roll back to stock forum. I don't know if it will help anyone else, but figured I'd put it here as well if it might. All credit for this goes to the original poster johnnyrichter:
johnnyrichter said:
Tried this method after being on LineageOS for a week or two and having poor LTE signal, no MMS, and voicemail issues so I'm trying to go back to stock so I can have a fully functional phone since I rely on it heavily for work. Followed all steps using BLN-L24 B360 firmware. On step 10 I rebooted to update and it went right to "5% Installing Update" and stuck there for 5 mins, then rebooted itself, has been sitting at "honor" boot screen for 14 minutes so I made it reboot to EMUI recovery, wiped/factory reset, rebooted, loaded EMUI afte 2 more minutes. Appears to have worked and hopefully my issues are fixed!
Edit: Signal, mms, and voicemail issues fixed.
Click to expand...
Click to collapse
Hopefully will benefit someone here as well.
When debranding the BLN-L24, and branding it to BLN-L21, are there any issues with the ROMs once they're installed? I imagine the radios, and such are different for the two models??
BakedOnSomeSour said:
Why are the devs not testing on these devices?
Click to expand...
Click to collapse
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
galapagos said:
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
Click to expand...
Click to collapse
well, many don't want to give them a phone because most developers here tend to stop work on a ROM and leave people hanging.
I have gotten several ROMs working on L24 variant...
Yes it seems to me any Elite kernel based ROM works or should work on the L24. But /data must be ext4 format. Then even that the ROM works, the fingerprint scanner never allows a complete successful scan. I think because it must be f2fs format for that encryption to work or something. This is the link to those ROMS https://hassanmirza01.blogspot.com/p/custom-roms.html?m=1
On the other hand the LOS based ROMs never work or at least they reboot and the screen is always black or the ROM branding just stays there flashing. This sucks cause I want to run the newest Resurrection ROM but I ask the developer about why I have that problem or how long that ROM takes to boot and I never get an answer. He also just put a new beta AOKP ROM up and it does the same black screen thing too.
I am also suspicious it has to do with the version of TWRP. I think some are capable of formatting f2fs correctly or the encryption or whatever. Point is some of the devs need to be a little more consistent answering questions at a minimum. I know it takes time to fix bugs but give us a little heads up.
After searching around and not being 100% sure on how I should go about fixing this particular bootloop I decided to post a thread. Bootloader unlocked, phone unlocked, FRP unlocked, and TWRP installed. Can't seem to get the phone recognized when plugged in no matter where I'm at and hisuite recovery doesn't work, nor does the erecovery or whatever it's called. I had the phone running just fine with supersu but after installing my usual Xposed/Busybox and rebooting I got caught in a bootloop. (might have been caused by being on Oreo and having some problems with a version made for Nougat or something). I've seen there are various ways to exit the loop and at this point I'd be open to any but I do notice some posts saying they almost bricked their phone while doing so. Currently on my microSD I've got a hwota update I was going to try to use. I've got no backups in TWRP either because I'm irresponsible (my fault). What can I do to just wipe the phone, reinstall any version of android and get back to where I was at. I'm a little new to this as I've only ever rooted my tablet. Thanks for the help and all the info I've taken from this forum before and hopefully now. Forgot to mention I don't know my full device number only MHA-L29 in the US.
Ok Well after laying in bed and thinking about it I wound up running HWOTA8 from TWRP since I could access that. Seemed to just bring me back to eRecovery, and I factory reset my phone. I'll reinstall TWRP and flash supersu then make a backup and try again. Not sure what happened but I seemed to be in a pretty good spot since I could access TWRP even though my phone wouldn't show up on my computer while in fastboot/Recovery mode.
edit: oh I got a new problem now. I'm on testkeys firmware, camera, sim, and bluetooth work but I can't update from 7 back to 8. I'll do more testing around before bothering to unlock bootloader or install TWRP.
I've been trying to follow the guide in this thread but to no avail. I just get software install failed and then I have to start again.
Well another day of searching google and XDA trying to figure out guides and I don't think I'm any closer to a solution to getting off test-keys. Some seem to suggest that you need to go back to MM, some suggest running HWOTA, some suggest the three button recovery and others say that won't work at all. I'm not sure I've ever felt this confused haha. I'll keep at it but there has to be some way to get to a build that has the updater on it since that's all I seem to be lacking to get off test-keys. I can even search the settings for the updater but when you press it nothing happens. It's like they completely removed any sort of updating this build can do.
KittyCat5eUTP said:
Well another day of searching google and XDA trying to figure out guides and I don't think I'm any closer to a solution to getting off test-keys. Some seem to suggest that you need to go back to MM, some suggest running HWOTA, some suggest the three button recovery and others say that won't work at all. I'm not sure I've ever felt this confused haha. I'll keep at it but there has to be some way to get to a build that has the updater on it since that's all I seem to be lacking to get off test-keys. I can even search the settings for the updater but when you press it nothing happens. It's like they completely removed any sort of updating this build can do.
Click to expand...
Click to collapse
What is your full build number? Please, post screenshot.
5[Strogino] said:
What is your full build number? Please, post screenshot.
Click to expand...
Click to collapse
Model: MHA-L29
Build: NRD90M test-keys
EMUI version: 5.0.1
Android version: 7.0
I believe I was originally on some variant of MHA-L29C567 since I'm US based and its the dual sim version
I've tried using HWOTA a few times to either upgrade/update or rebrand and no matter what I choose when my phone restarts to install I just get software install failed. Usually I'll have to run through first time setup again. I've read that some people said this particular issue had to do with the update zips but mine seem to be named correctly so all I can think of doing is getting another firmware and trying again with that.
haha okay so I found out I was putting the update zips in the wrong folder. I fixed that and re ran HWOTA. update started/finished and my phone started booting and restarting a lot then went into erecovery. I'm downloading the update package right now and it's slow as hell but it's moving. And that failed leaving me to boot a few times and then get back to erecovery. I'll try getting into fastboot or recovery.
Edit: Well that seems to have resolved itself now. After having the erecovery fail I wiped/factory reset and booted the phone into oreo 8.0.0.321 with all the apps and updater. Thanks to everyone who dropped in and I'll be getting emails if someone replies that needs help too. I'm not very knowledgeable but I can give it a shot.