To anyone that owns onetouch idol 2s
I figured out a way to get cwm recovery onto this phone and it's close variants.
6050 models. I have 6050a
1. Head over to yadi.sk/d/CrCAJ1MgcxTCW
2. Download file
3. Install the driver from the attached archive ADB
4. turn off your phone and boot to "fastboot" by volume down+power button before the alcatel one touch screen.
5. If you did it correctly, the label will stay on the same screen.
6. Run the "check_disk.cmd".
7. Connect your your phone on USB. Make sure debugging is enabled.
8. Run the file "flash_recovery.cmd"
9. Phone will reboot.
10. Power off phone and then power on holding volume up+power button till it boots into recovery.
You should now have cwm recovery on your phone
Message me or reply if you have any questions
Related
Well I updated my CWM to the latest .5 or something because it was supposed to fix the charging while off problem, unfortunately now I can't get into CWM manually at all.
I used to be able to pull the battery, plug phone in, put battery back and turn on and it would load CWM. Now it just begins charging and then boots normally when I hold the power button.
Any help?
Heres what i do:
1. Shutdown the phone
2. Once its off, press and hold the volume down, then press and hold the powerbutton.
3. once in the bootloader, use you volume down button to select the recovery option, to click it press the power button and it should be on CWM recovery.
OR
1. Download ROM manager from the Android Market
2. Once installed, Click on "Reboot to recovery" or something similar.
Ive been trying to install CWM 6 Touch on my P5100 using this forum (http://forum.xda-developers.com/showthread.php?t=1881675).
Follow everything to the letter but cant get to CWM 6, instead the device boots up into stock recovery mode.
Help anyone??:crying:
Solution!
Asad_612 said:
Ive been trying to install CWM 6 Touch on my P5100 using this forum (http://forum.xda-developers.com/showthread.php?t=1881675).
Follow everything to the letter but cant get to CWM 6, instead the device boots up into stock recovery mode.
Help anyone??:crying:
Click to expand...
Click to collapse
I had the same problem, because I had already taken the 4.0.4 update. The problem I (and I suspect the others) were having is the reboot after Odin installs the CWM. It happens so fast, there's no time to unplug the tablet and do the button dance to boot into recovery. As a result, the normal boot goes through, and runs the install-recovery.sh that Ryan79 mentioned in system/etc, restoring stock recovery.
Here's how I solved it:
1). On Odin, uncheck "Auto Reboot".
2). Install CWM6.
3). When it goes green, unplug the tablet (still in "download" screen).
4). Reboot manually into recovery (hold power + Vol. left, release power, hold vol. left until CWM screen comes up). I did this straight from the "download" screen. The tablet powered off after a few seconds of holding the power button, then came up to the samsung screen, then I released the power button and continued to hold the volume button until CWM6 loaded.
5). I installed the cwm-root-gtab2.zip file.
6). I selected YES when the "Stock Reboot Fix" question appeared.
Rebooted from recovery, Successful root! Looks to me like the "fix" simply renames the install-recovery.sh, removing the ".sh" at the end. I have now rebooted a couple of times normally, and can still access CWM6 through the buttons.
links:
------
Workaround ----> http://forum.xda-developers.com/showthread.php?t=1657056&page=32
ROM upgrade ---> http://forum.xda-developers.com/showthread.php?t=1881675
CWM 6.0.1.2 ---> http://forum.xda-developers.com/showthread.php?t=1842246
Please tell me how to open recovery mode in which "Install From SD Card" Option will available???
This typically refers to Custom Recoveries. If you have one flashed that is.
To answer your question. You turn the phone off, hold down VOL DN +HOME +Power and then let go of the power button after the phone starts. Don't let go of the other 2 buttons until you get recovery screen.
NOTE, the recovery that came with the phone is incapable of flashing the ZIP files from your SD Card.
My H60-L04 was having so much trouble I factory reseted from CWM now my SD card is not detected some one please help.:crying:
How can I go back to the stock condition like out of the box condition.:crying:
To get back to stock condition, you must patient because there are quite a number of steps if you haven't already downloaded the files and prepared drivers before.
The steps:
In fast boot mode, flash stock recovery image.
Download and full stock ROM for you h6 model, uncompress it and copy dload folder to the root directory of a micro sdcard.
Insert the micro sdcard.
Apply three finger mode flash: power down phone, press and hold all vol up, vol down, and power buttons until it shows upgrading.
To flash in fast boot mode, you must prepare your PC with appropriate drivers. Fool proof installing huawei hisuite will install the necessary drivers.
You must also first download the stock recovery image and fast boot tools first and get to know the fastboot command to flash.
To boot into fast boot mode: power down, press and vol down and plug in usb cable.
dchsub said:
To get back to stock condition, you must patient because there are quite a number of steps if you haven't already downloaded the files and prepared drivers before.
The steps:
In fast boot mode, flash stock recovery image.
Download and full stock ROM for you h6 model, uncompress it and copy dload folder to the root directory of a micro sdcard.
Insert the micro sdcard.
Apply three finger mode flash: power down phone, press and hold all vol up, vol down, and power buttons until it shows upgrading.
To flash in fast boot mode, you must prepare your PC with appropriate drivers. Fool proof installing huawei hisuite will install the necessary drivers.
You must also first download the stock recovery image and fast boot tools first and get to know the fastboot command to flash.
To boot into fast boot mode: power down, press and vol down and plug in usb cable.
Click to expand...
Click to collapse
Thanks it worked :good:
But for some reason I can't use custom launchers like Nova,Apex .....
I'm not getting the option to choose between Hauwei home and custom launcher
L0GAN0 said:
Thanks it worked :good:
But for some reason I can't use custom launchers like Nova,Apex .....
I'm not getting the option to choose between Hauwei home and custom launcher
Click to expand...
Click to collapse
Definitely you can change the defaults. Only EMUI rom works a little differently.
Here it is: Settings > Manage apps > All > Look at the bottom the left icon "Default app settings" > Click in > Change default launcher
A while back I flashed my Samsung Galaxy Tab 2 with a SLIM Rom. I used Odin way back to do get what I needed. It has been a while since I loaded a custom rom, but maybe I am missing a step to get CWM loaded so I can load another custom rom. The following are the steps that I go through.
1. Power the device down
2. Boot the device into recovery mode (HOLD Power button + volume down). the screen says it is in ODIN Mode.
3. Plug in the USB
4. Fire up Odin
5. Load 'GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar' in the PDA field
6. Click Start
Then the device boots up normally and then loads like normal. How do I get it to boot CWM in the recovery mode?
Hold power + home + bolume up button to boot into recovery