Dear experts,
after reading many posts regarding this subject I fail to flash my S4 properly. The phone I bought was refurbished and I can't remember what version specific version of operating system it had. I can only remember that it was 4.2.2. I have tried to flash it with stock 5.0.1 which was successful but then the 'Wi-fi' wouldn't turn 'ON' (the switch keeps coming back to 'OFF' position). When I try to flash it back to some stock ROM 4.2.2 like 'Sprint' L720VPUAMDC for example, I keep getting 'FAIL' in Odin3 (v3.10). I have managed to flash one version of 4.2.2 (can't remember which one now) but I still had a problem with 'wi-fi' and on top of that 'samsung keyboard' kept failing as well.
If anyone can help me sort this out, I would be very grateful.
Phone: Samsung S4 (GT-9505)
Product name: SPH-L720T
Download mode message:
Code:
ODIN MODE
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WHITE PROTECTION: Enable
SECURE CHECK FAIL: abort
Odin status message:
Code:
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Thank you in advance,
Nikola
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Related
I'm trying to apply the correct firmware for my region UK and carrier which is EE but i can't seem to do this since it keeps failing on me when i start the process. This is the output from the logs.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just some background info as to why and what i've done previously.
The problem is i can't update the software since it keeps on saying processing failed. After looking into this it may be linked to region of the device since the baseband versionis I9505XXUGNK4 and the CSC part is not a UK code which is why i'm guessing the phone can't be updated also on the phone screen it shows the following error message at the point at which it fails secure check fail sbl1
Also i used kingoroot to root the device and i have a superuser app install as well before using Odin but surely this can't be an issue can it?
Hi,
Try posting your question here:
Galaxy S 4 Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi i'm currently having some issues with my note 4, lately it started freezing and restarting anytime I needed to use it. So I did some research and was told that it was either the battery that needed to be replaced or the firmware needed to be downgraded.
So I tried to downgrade from 6.0.1 back to lollipop with Odin, got an error and now im stuck with either the download mode or the other screen asking to use kies to recover. I tried Kies but it somehow doesnt recognize my device so it never finishes the update, so I decided to just stick with Odin but always get the same "system.img.ext4" error.
Is there something that Im missing or been doing wrong?
Thanks in advance.
Download mode info
Odin mode (high speed)
product name: SM-N910F
current binary: samsung official
system status: official
reactivation lock: off
know warranty void: 0x0
qualcomm secureboot: enabled (csb)
AP SWREV: S1, T1, R1, A1, P1
secure download: enable
full Odin script:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Write)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dear forum,
sorry this is my 1st post - if its in the wrong section please put it to the right one.
i have a samsung a3 (2016) SM A-310F (EU) Phone here.
It was on Android 6, now i tried to put it back in hard reset (vol + and home and pwr) - ok, as good as new - but it wont let me go in, because it needs a gmail account, that i didnt know.
so i tried it with odin 3.07 and the latest version and the samsung stock rom.
on odin it tells me that:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Why?
And i am not sure how to get back my stock android now, because it tells me now this (on the pic): i cannot put a pic on this , because i am new.
so this is on my display:
ODIN MODE
PRODUCT NAME: SM-A310F
CURRENT BINARY: Samsung official
SYSTEM STATUS: OFFICIAL
FAP LOCK: ON
Secure Download: ON
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: 0:3 K.0 S.0
SW REV. CHECK FAIL DEVICE: 3, BINARY: 2
Edit: tried it with "apply update from sd card" . used an original rom(A310F0JV2BPH1_XFE.zip).
then, this error came: E:footer is wrong ; E:signature verification faild
then in the first line appeared:
Android Recovery
MMB29K.A310FXXU3BQC2
samsung/a3xeltexx/a3xelte
6.0.1/MMB29K/A310FXXU3BQC2
user/release-keys
....
hello guy's, i can't restore my s7 edge SM-G9350, here's my story, i unlocked the bootloader using CROM Service & flash TWRP file and install a custom ROM from Trada ROM Last Oreo v10 by Hilary Trump few days ago, last night i accidentally rebooted my phone to recovery mode and it detects my custom ROM installed it say's FRP blocked it etc.., so all i do is i re-flash the stock firmware that i always use for repairing my phone "G9350ZHS5CTA1". but last night there's an error saying volume size is too big and invalid id ext4 img, i really need help how to fix this problem. so the FRP Lock are ON, and my warranty are Voided.
"My Phone"
FRP is enabled, ignore PIT download
Volume Size is too big 1024000 < 1254400
ODIN : Invalid id ext4 image
"In Odin"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5587 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hello guy's, i can't restore my s7 edge SM-G9350, here's my story, i unlocked the bootloader using CROM Service & flash TWRP file and install a custom ROM from Trada ROM Last Oreo v10 by Hilary Trump few days ago, last night i accidentally rebooted my phone to recovery mode and it detects my custom ROM installed it say's FRP blocked it etc.., so all i do is i re-flash the stock firmware that i always use for repairing my phone "G9350ZHS5CTA1". but last night there's an error saying volume size is too big and invalid id ext4 img, i really need help how to fix this problem. so the FRP Lock are ON, and my warranty are Voided.
"My Phone"
VOLUME SIZE IS TOO BIG 1024000 < 1254400
ODIN : INVALID ID EXT4 IMAGE
"In Odin"
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5587 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
me too i need help
you solved it?...i need ur help