Hi i'm currently having some issues with my note 4, lately it started freezing and restarting anytime I needed to use it. So I did some research and was told that it was either the battery that needed to be replaced or the firmware needed to be downgraded.
So I tried to downgrade from 6.0.1 back to lollipop with Odin, got an error and now im stuck with either the download mode or the other screen asking to use kies to recover. I tried Kies but it somehow doesnt recognize my device so it never finishes the update, so I decided to just stick with Odin but always get the same "system.img.ext4" error.
Is there something that Im missing or been doing wrong?
Thanks in advance.
Download mode info
Odin mode (high speed)
product name: SM-N910F
current binary: samsung official
system status: official
reactivation lock: off
know warranty void: 0x0
qualcomm secureboot: enabled (csb)
AP SWREV: S1, T1, R1, A1, P1
secure download: enable
full Odin script:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Write)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
dmar16 said:
Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Use the right pit file and you should be fine.
LS.xD said:
Use the right pit file and you should be fine.
Click to expand...
Click to collapse
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Try restarting odin, use right pit file and it should flash the stock rom
Don't forget to hit thanks if I helped you...
dmar16 said:
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Click to expand...
Click to collapse
You phone (or at least the stock firmware you want to use is "France - Orange") There has no official Lollipop update been released yet.
The pit file is "Hong Kong -Taiwan" , may be its not compatible to each other. Try to get a pit file that matches your firmware. Or take a firmware that matches the pit file. In any case you should backup your EFS before going on flashing different firmwares. Use TWRP to backup your EFS .
OK thanks. Downloading FW for Hong Kong - Taiwan now. I will let you know if it works.
dear forum,
sorry this is my 1st post - if its in the wrong section please put it to the right one.
i have a samsung a3 (2016) SM A-310F (EU) Phone here.
It was on Android 6, now i tried to put it back in hard reset (vol + and home and pwr) - ok, as good as new - but it wont let me go in, because it needs a gmail account, that i didnt know.
so i tried it with odin 3.07 and the latest version and the samsung stock rom.
on odin it tells me that:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Why?
And i am not sure how to get back my stock android now, because it tells me now this (on the pic): i cannot put a pic on this , because i am new.
so this is on my display:
ODIN MODE
PRODUCT NAME: SM-A310F
CURRENT BINARY: Samsung official
SYSTEM STATUS: OFFICIAL
FAP LOCK: ON
Secure Download: ON
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: 0:3 K.0 S.0
SW REV. CHECK FAIL DEVICE: 3, BINARY: 2
Edit: tried it with "apply update from sd card" . used an original rom(A310F0JV2BPH1_XFE.zip).
then, this error came: E:footer is wrong ; E:signature verification faild
then in the first line appeared:
Android Recovery
MMB29K.A310FXXU3BQC2
samsung/a3xeltexx/a3xelte
6.0.1/MMB29K/A310FXXU3BQC2
user/release-keys
....
hello guy's, i can't restore my s7 edge SM-G9350, here's my story, i unlocked the bootloader using CROM Service & flash TWRP file and install a custom ROM from Trada ROM Last Oreo v10 by Hilary Trump few days ago, last night i accidentally rebooted my phone to recovery mode and it detects my custom ROM installed it say's FRP blocked it etc.., so all i do is i re-flash the stock firmware that i always use for repairing my phone "G9350ZHS5CTA1". but last night there's an error saying volume size is too big and invalid id ext4 img, i really need help how to fix this problem. so the FRP Lock are ON, and my warranty are Voided.
"My Phone"
FRP is enabled, ignore PIT download
Volume Size is too big 1024000 < 1254400
ODIN : Invalid id ext4 image
"In Odin"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5587 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hello guy's, i can't restore my s7 edge SM-G9350, here's my story, i unlocked the bootloader using CROM Service & flash TWRP file and install a custom ROM from Trada ROM Last Oreo v10 by Hilary Trump few days ago, last night i accidentally rebooted my phone to recovery mode and it detects my custom ROM installed it say's FRP blocked it etc.., so all i do is i re-flash the stock firmware that i always use for repairing my phone "G9350ZHS5CTA1". but last night there's an error saying volume size is too big and invalid id ext4 img, i really need help how to fix this problem. so the FRP Lock are ON, and my warranty are Voided.
"My Phone"
VOLUME SIZE IS TOO BIG 1024000 < 1254400
ODIN : INVALID ID EXT4 IMAGE
"In Odin"
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5587 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
me too i need help
you solved it?...i need ur help
hello guy's, i can't restore my s7 edge SM-G9350, here's my story, i unlocked the bootloader using CROM Service & flash TWRP file and install a custom ROM from Trada ROM Last Oreo v10 by Hilary Trump few days ago, last night i accidentally rebooted my phone to recovery mode and it detects my custom ROM installed it say's FRP blocked it etc.., so all i do is i re-flash the stock firmware that i always use for repairing my phone "G9350ZHS5CTA1". but last night there's an error saying volume size is too big and invalid id ext4 img, i really need help how to fix this problem. so the FRP Lock are ON, and my warranty are Voided.
"Phone"
FRP is enabled, ignore PIT download
Volume Size is too big 1024000 < 1254400
ODIN : Invalid id ext4 image
"Odin"
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5587 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)