Database Info

[Review] HTC Dot View ICE edition

Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.

typhoonikan said:
Howdy, this is my first review. I thought I would have enjoyed a thread like this so I would create one. I am comparing the dot view ice to the dot view for the m8 because that is what I had and most likely what other have had. A side note, I am loving this phone! (And pics were taken with my old HTC EVO 4G LTE)
PICS:
http://imgur.com/a/s1Mli#0
The black m9 version is lighter than the m8 black version
The m9 'dot holes' are fractionally bigger than the m8's. To me, this makes the dots seem more vivid and brighter
The selfie-cam is no longer visible on the m9 version and is essentially protected
The m9 version covers the entire edge of the phone.
The m9 version is very tight on the phone. I really don't think dirt and things will get in between the phone and the case with the way the edge grips onto the phone. However because of this, the phone is very difficult to get ouf of the case. I feel that I might damage the case or the phone when removing it.
Since the case covers the entire phone (around the edges), the volume and power buttons are now covered. I feel they are a bit difficult to determine if I am pushing them- there is no clicky feel or noise made when pushing them.
Since the back is clear plastic, I feel that the outside will eventually be scratched to heck. I personally lay my phone with the screen up though usually.
The flappy cover still has the same rigidness and (I feel) quality as before.
The m8 doesn't function in the m9 case and the mm9 doesn't function in the m8 case. They DO fit in each other's cases, but the magnet that turns on the functionality is offset from the sensors rendering them incompatible.
If anyone feels that I missed anything, feel free to add to the list.
Click to expand...
Click to collapse
I can confirm that the M9 does not work in the M8 case. I have had a test M9 since January and an M8 with Dotview. As you state, the magnets are in different locations, as are the sensors. HTC told me early on that the M8 case wouldn't work.

Got the Dot View ICE edition for my M9, I'm really loving it. everybody at work was very impressed with it's functionality.
The thing that I'm uneasy about is the HTC Universal Car Mount for the M9. I mean using the car mount is really seamless. My problem is having to remove the phone from the case if I want to put it in the mount because I'm afraid the front cover will break or bend to the point where its no longer usable, at which point I will have a regular see trough case with no dot view at all...
Any one else having this issue?

Looks like the phone won't be popping out of the case as much or at all this time around.

I got one of these with a Tmobile gift card I had. I love the dot view and how it functions but the flip case isn't for me. It's awkward to use the phone with the flap open because it wants to spring back to the phone, and it's just a weird grip to use while using the device.
I really dig the look, size, and feature though!

Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?

petermulders said:
Hi!
Stupid question maybe.. I've had a Dot View Ice since monday. I haven't paid much attention to the cover when it's closed, but today I realized that when I turn my phone sideways or upside down, the cover opens. Shouldn't that be prevented by the magnet inside?
Can anyone tell me if they experience this too or is my Dot View just ruined after four days?
Click to expand...
Click to collapse
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.

BUBBA DUB'S said:
I don't think it is ruined, I don't think the magnet is strong enough to out weigh the rubber casing and if you keep the case on while using your phone (more than 20 mins with cover bent to the back) it eventually wears down to the point where it will flip open turned sideways or upside down. I noticed this recently and take the phone out of the case when I am at home to preserve the elasticity of the case. Regardless it isn't like it was when I first purchased it, but I still use it to protect my phone when I am out and about.
Click to expand...
Click to collapse
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..

petermulders said:
Okay it's not just my case than.. Kind of disappointing though as it did hold the cover in the first few days of use..
Click to expand...
Click to collapse
I agree, for what we paid for it , it shouldn't have lost its "spunk" with in the first week of use. Its still a nice case and provides protection which matters most in the end.

FIt
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?

agreen1985 said:
I just got this case in the mail and it looks very slick. My only issue....it doesn't close all the way! I do have a glass screen protector so that my be the issue. Any one else having the same issue? or did I just get a defective case?
Click to expand...
Click to collapse
The screen protector is the issue. You don't need it anyway now.

I don't really know how it should be but the front flip cover sitting very los after few days of use. Coming from M7, no idea about M8 dot view only my girlfriend told me the phone is not save in

I have the Ice one and it doesn't close properly on mine either. No screen protector on either. Shoddy really.

typhoonikan said:
The screen protector is the issue. You don't need it anyway now.
Click to expand...
Click to collapse
Does the case have a built in screen protector because my last HTC that I had was the flip case and it wouldn't close all of the way and I thought I was OK, but the screen still got scratched.

I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.

typhoonikan said:
I just got the premium case (non-ice). I believe the flap is just as rigid and will tear like the ice edition did. Meanwhile my m8 dot view never tore over two years. I hope this one lasts a while.
Click to expand...
Click to collapse
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!

i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?

ratjr15 said:
I had mine for 2wks and it was already tearing off. Exchanged it for a cheap-o Body Glove case with a stand. I really wish the dot-view was more durable, as I really like the idea!
Click to expand...
Click to collapse
guitmz said:
i love this case but in 2 weeks , the front was separated from the back
and i didnt used it that much, nothing wrong of my part
thinking in glue it together again, any ideas?
Click to expand...
Click to collapse
So far, mine isn't tearing, but I have seldom opened it more than 90 degrees. Lol

Metal Hybrid case with NO signal loss, I have pics & proof!

Found this case on Aliexpress.com that promises no signal loss because slots are cut out where each antennae strips are on the phone. Looks amazing. Also says it has a liner on the inside to cushion the phone if dropped.
S6 Edge
http://www.aliexpress.com/item/For-...e-Case-For-Samsung-Galaxy-S6/32328021917.html
S6
http://www.aliexpress.com/item/S6-2...inum-Bumper-Case-For-Samsung/32328655797.html
I am ordering one but does anyone ordered have any reviews of this case?

Unfortunately that isn't how it works. Those plastic slots aren't really there for the antenna to radiate through. Either they are merely aesthetic, or they are there to break up the metal sides so that they are the right length to actually be part of the antenna themselves. So this case really is going to do nothing to stop any signal degradation.

Oh No, it's our friend Lucky Garden again pushing more China junk.

I do plan to order something like this one, as I was searching for it yesterday. Please give us review, when you get it.

Aww crap, I was hoping it would be a great case. Well I bought one but the good thing is it was only $2.99. When it gets here I will let you know what I think.

It came!!
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!

BlessedTalent said:
So the case came today, took about 2 weeks to get it. Not bad I guess with the free shipping.
Things I like about it:
Fits snug, no movement or jiggling in the case
No signal loss, no wifi interference at all
Looks pretty slick, doesn't add bulk, can see the phones beauty
Buttons are very responsive and clicky. Metal buttons, not plastic.
Most cut outs are cut perfectly.
Things I don't like about it:
Minimal lay on the table protection on the front
Back of case presses against glass of phone creating an oil slick effect as seen in my pic below (nothing a matte screen protector can't fix)
Makes phone kind of slippery, feels almost like there isn't a case on the phone.
Headphone jack cutout it very narrow so anything other than original earphones probably won't fit.
All in all I like the case and will use it for work, not bad for a $3.00 case! I am really glad it isn't causing any problems with cell signal or wifi signal. I will probably order other colors in a few days!
Click to expand...
Click to collapse
I ordered one I think a day or two after you did. So it should be here soon. what about the GPS? Is the signal on that affected much?
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Oh, and as far as the slipperiness goes. I did this with my clear case and it worked pretty well. Most of the time that slipperiness is a combination of the slick plastic and the release agent they used. I started with 2000 grit sandpaper. Then I wet sanded it with 2000 grit. Then I 5000 grits sanded it. Then I used mothers plastic polish. Same thing you use on headlights. And it's much more comfortable to hold without getting that greasy slippery feeling and remaining crystal clear

Nice, I'll do that to help with the feel. My GPS seems to be unaffected as well. Seems like a win on this one to me.

One thing I will say is that the back cover is a pain to get off, doesn't slide off as easy as it goes on. Not a deal breaker but if you like to change your cases often this might be a problem for you.

looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't

[email protected] said:
looks similar to this http://www.ebay.com/itm/Luxury-Alum...Domain_0&var=470724516067&hash=item27feab9f65
I tried to find it on ali website but couldn't
Click to expand...
Click to collapse
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.

BlessedTalent said:
I found it for the S6 Edge http://www.aliexpress.com/item/Luxu...e-For-Samsung-Galaxy-S6-Edge/32340065184.html
It actually looks way better than that one I bought. I might have to look for it for the regular S6.
Click to expand...
Click to collapse
please post if you find it for us.

[email protected] said:
please post if you find it for us.
Click to expand...
Click to collapse
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.

BlessedTalent said:
Here it is for the S6
http://www.aliexpress.com/store/pro...For-Samsung-Galaxy-S6/419092_32334833286.html
I might have to order this one!! I wonder how this acts with the cell signal and reception because the one I bought doesnt cause any problems.
Click to expand...
Click to collapse
If you want me to guineepig I will lol. I have no experience with this website is it better/more reliaable than ebay?

That's cool, yeah I don't want to put out $20 to find out it doesn't work as well as planned. I have purchased 5 cases over the past 6 years and have never had a problem. The money goes in escrow until you confirm you got your order in satisfactory condition and time. If not the money goes back to you. I pay with my credit card but others use Paypal. I hate Paypal so I don't use them. I thinks it's safe and will continue to order from Aliexpress. Others on this forum have also ordered, they may have some reviews on their experiences.

Ill buy it tonight. I am debating on black on black or back and silver

I just installed a after s reel protector on he back of my phone and the removal of the back of the case is super easy to remove now. I guess that moisture between the glass and the plastic was creating a suction keeping the back of the case stuck to the phone. Not a problem now though.
Really liking how this case feels and looks, most people don't even notice that a case is in my phone which is the whole point of me buying it.

I got this case via eBay and I am very pleased with it. Just what I wanted. I'll make a thread and take pictures later.

Why aren't there aftermarket battery covers?

I'd pay 40$ for a nice glass and metal back door if it didn't affect the phones profile at all. With a lot of people sticking with the note 4 I assume a lot of them would also be willing to spruce it up a bit. I've found one shady eBay seller with metal back doors but nothing else, it seems like an easy accessory to make that anyone who keeps their phone naked would like.

agree totally. I'd love a direct replacement. Not after carbon, but maybe just a different texture like the new moto x. Alternatively there are skins, but they are fragile.
I'm not upgrading (previously I've had every note model from pre order) so will stay with the 4 until something amazing is released. Was waiting for the LG G4 pro but if the v10 is what they release, I may avoid it. So customising my device would be good - with NFC!. I don't use a case so would appreciate anything offered - leather/wood/pattern etc. Quite liking the zenfone back!!!:silly:
http://www.casefanatic.com/samsung/...leather-motif-battery-replacement-cover-case/

Probably because of the Note 4 design, since top and bottom of it is not plain at all. It's a bit rounded and there's a little protuberance where the headphone jack is located. It's hard to imitate that design in a metal case (and impossible with glass). There're some metal back doors but most people who bought them are claiming that it doesn't fit very well in those areas indicated in the beginning of this reply.
This one is made of metal and tempered glass: http://www.aliexpress.com/item/Luxu...est=201526_4,201527_1_71_72_73_74_75,201409_2
Looks nice, but it's a bit too thick to me. There's the same model but instead of a case it actually replaces the battery cover (you have to take it off first to put the case on it) that fits perfectly in the phone and is much more thinner, but I can't find it atm.

Not sure how "nice" these are, but there are a few out there..
http://www.aliexpress.com/wholesale...20150919002705&SearchText=note+4+battery+door
---------- Post added at 04:29 AM ---------- Previous post was at 04:28 AM ----------
http://www.aliexpress.com/item/Free...est=201526_3,201527_4_71_72_73_74_75,201409_1

You will not find a glass battery door (back cover) because it needs to flex when you remove the cover. If it were glass it would shatter after several attempts. As for a metal battery door, it would kill reception.
There's hundreds of battery doors for the Note 4 on Amazon. There's brushed metal, wood, etc.

Where to buy official Samsung screen protector in US?

Looking for anyone who's been able to locate the official Samsung screen protector here in the US at a physical store (Best Buy, AT&T, etc) or a reputable online store.
Thanks!

Bump. I'm looking aswell.

Mobilefun.com
Sent from my SM-N930V using Tapatalk

moralesd66 said:
Mobilefun.com
Sent from my SM-N930V using Tapatalk
Click to expand...
Click to collapse
Not in stock

Yeah, it was a 5day wait until it was restocked when i bought it. Im still waiting.
Sent from my SM-N930V using Tapatalk

I'm amazed at the lack of official accessories for the launch.
Then again, look what happened to best buy/target.
I guess we will just have to wait...

I received mine. Haven't installed it yet. But it's in my grubby little hands. Mobilefun VERY early order.

Ok, installed.
Fits better than many of the aftermarket ones based on what I've seen for reviews. Sides are curved already, little cutouts at the corners so they don't pull up.
After several hours of bubblepushing, I've got it almost perfect. I also think letting it get nice and heated up on the wireless charger helped, tho one of the sides still has some bubbles and the curved screen makes it really tough to push them out. They get shoved around. I suspect all would have similar issues.
it feels less rubbery than say a Zagg, not as smooth as glass. The curves do NOT make it easier to install but if you take your time, and have plenty of patience, it should go fine.
Inside the box, you get 2 screen protectors, a 2 inch square microfiber cloth and some dust removal stickers. No cleaner, no instructions but the case had nice foam padding.... It does not state wet or dry install. I went with dry.
I scrapped the stickers and mf cloth and used real cleaner and a much bigger microfiber cloth. Also got my bathroom all steamy to clear dust particles because there's nothing more OCD than a big piece of lint under your screen.
Now, you're going to want to know if it'll work with cases. Here's the rub. I only have the official S-VIEW case and it seemed to be fine there, didn't push up the sides "YET".
I've had it out of the case for HOURS after the install and just put it in 10 minutes ago.
Samsung got the fit nearly perfect, not unexpected. It is their device.
It's NOT the cheapest one out there and it seems rather hard to find for now, but so far, I'm "ok" with it. Time will tell.
I'll post at a later date/time if the sides start pushing up or the remaining bubbles don't get worked out. I cannot test it with any other case as I almost always use the s-view one.

Compusmurf said:
Ok, installed.
Fits better than many of the aftermarket ones based on what I've seen for reviews. Sides are curved already, little cutouts at the corners so they don't pull up.
After several hours of bubblepushing, I've got it almost perfect. I also think letting it get nice and heated up on the wireless charger helped, tho one of the sides still has some bubbles and the curved screen makes it really tough to push them out. They get shoved around. I suspect all would have similar issues.
it feels less rubbery than say a Zagg, not as smooth as glass. The curves do NOT make it easier to install but if you take your time, and have plenty of patience, it should go fine.
Inside the box, you get 2 screen protectors, a 2 inch square microfiber cloth and some dust removal stickers. No cleaner, no instructions but the case had nice foam padding.... It does not state wet or dry install. I went with dry.
I scrapped the stickers and mf cloth and used real cleaner and a much bigger microfiber cloth. Also got my bathroom all steamy to clear dust particles because there's nothing more OCD than a big piece of lint under your screen.
Now, you're going to want to know if it'll work with cases. Here's the rub. I only have the official S-VIEW case and it seemed to be fine there, didn't push up the sides "YET".
I've had it out of the case for HOURS after the install and just put it in 10 minutes ago.
Samsung got the fit nearly perfect, not unexpected. It is their device.
It's NOT the cheapest one out there and it seems rather hard to find for now, but so far, I'm "ok" with it. Time will tell.
I'll post at a later date/time if the sides start pushing up or the remaining bubbles don't get worked out. I cannot test it with any other case as I almost always use the s-view one.
Click to expand...
Click to collapse
Im so jealous of you. I've got the Skinomi one and cant keep the edges down for the life of me!

Can't find them in Canada either, the official samsung stores don't have them at this time

HeavenlyFall said:
Can't find them in Canada either, the official samsung stores don't have them at this time
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B01JMLQSFI/ref=od_aui_detailpages00?ie=UTF8&psc=1
Amazon appears to be my best bet. I have one on order that will be delivered next week hopefully.

hotspace said:
https://www.amazon.com/gp/product/B01JMLQSFI/ref=od_aui_detailpages00?ie=UTF8&psc=1
Amazon appears to be my best bet. I have one on order that will be delivered next week hopefully.
Click to expand...
Click to collapse
"Buy Used" :')
I think you can get them for CA from the same website, from what I gather everything is shipped from the UK anyway.
Edit: Yup, found it: http://ca.mobilefun.com/official-samsung-galaxy-note-7-screen-protector-60374

Is there an orange-peel effect on this original Samsung screen protector? Since it's a bit rubbery like Zagg.

No orange peel effect, it's not like the original Zagg, more like the HD one. Feels like hard plastic and not glass tho.
followup notes.
Still attached to the sides fine. Have taken the phone in and out of the sview case several times now to put in the Gear VR. Not once has it pushed up the sides.
The remaining bubbles have worked their way out now. I switched tips on my spen as suggested and it feels fine.
I think it's a keeper. Plus they give you 2 so I have a spare for when/if I tear this one up.

What tip you did you switch too? I got my screen protector on the way.

bagged00 said:
What tip you did you switch too? I got my screen protector on the way.
Click to expand...
Click to collapse
The white one felt the best. YMMV.

Hmmm, I dunnooo.......
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ Shield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Compusmurf said:
The white one felt the best. YMMV.
Click to expand...
Click to collapse
Is there any difference between the tips? i.e. white is softer, or vice versa??

Android1126 said:
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ SHield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Is there any difference between the tips? i.e. white is softer, or vice versa??
Click to expand...
Click to collapse
UPDATE* Second IQ Shield is better, and let me tell you, I followed the instruction video, and card perfectly, BUT, the edges are starting to lift again.
Ordered the (as advertised) OEM Screen Protector from MobileFun.com ... So this will have to do for now, until the Samsung one comes in.
And lastly, I see everyone blaming the manufacturers of screen protectors, they are all garbage, because it's near impossible getting the curved edges and beveled corners to stay down, even with a wet install.
The Note 7 has a sharp curve, as opposed to a slight arch (like on previous Samsung curved screens), hence it is that much harder to keep down.

Android1126 said:
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ SHield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Is there any difference between the tips? i.e. white is softer, or vice versa??
Click to expand...
Click to collapse
I'm using the OEM screen protector and clear view cover. Both are working well together
Sent from my SM-N930F using XDA Free mobile app

Android1126 said:
UPDATE* Second IQ Shield is better, and let me tell you, I followed the instruction video, and card perfectly, BUT, the edges are starting to lift again.
Ordered the (as advertised) OEM Screen Protector from MobileFun.com ... So this will have to for now, until the Samsung one comes in.
And lastly, I see everyone blaming the manufacturers of screen protectors, they are all garbage, because it's near impossible getting the curved edges and beveled corners to stay down, even with a wet install.
The Note 7 has a sharp curve, as opposed to a slight arch (like on previous Samsung curved screens), hence it is that much harder to keep down.
Click to expand...
Click to collapse
So I am the second version. Should into try it? In have the first version and it works really well. Just have some of the edges raising. Is the updated version smaller?
Sent from my Galaxy Note7 using XDA Labs

LG V30 Tempered glass screen protectors

MOD EDIT: LINK REMOVED
Per the forum rules, posing affiliate links is not allowed on XDA.

rumbikrobo said:
Do you plan to get a tempered glass screen protector?
Click to expand...
Click to collapse
No.
If nothing ever comes in contact with your screen except your hand, there's no reason to have a screen protector. The reason most people scratch their screens is because they put them in their pockets with other stuff like coins and keys. If I'm paying $700 or so for a handheld computer, I'm not sticking it in my pocket like it's my spare change.
I use a belt holster most of time. I try not to stick my phone in my pockets, since I keep metal objects like keys on a key chain and coins in my pockets. The few times I do put my phone in my pocket -- like when wearing shorts with elastic band -- I make very sure nothing else is in that pocket. And that's very rarely. The only time I have ever scratched my phone screen (one of the Nexus phones years ago) was the one time I ignored that rule. Learned my lesson.

Yep.
Because if I pay $700 for a handheld computer, I'm going to afford it all the physical protections I would a $700 handheld computer :v
Seriously though, I live in a rural area, where gravel dust - containing quartz, which is harder than the Mohs 6 that the digitizer glass is - is quite abundant.
I had my Droid 4 out on my desk for one day, before the screen protector arrived, and managed to inflict several super-fine scratches just playing with it. One day. Thankfully, my Turbo/Quark came with a Verizon one preinstalled (which itself has received several scratches so far).
Gorilla glass is under stress by design: each scratch is a potential hit to impact resistance. I keep my Quark in a case and plan to continue doing that with whatever I get next, but every bit of added durability on top of that helps.
(amusingly, this is the first phone I've actually felt I needed to protect. my previous phones - aforementioned Droid 4 and an LG Ally - were built like bricks and survived several drops apiece. good ol' keyboard sliders.)
As for which one, well, whichever one gets it right. Apparently nobody has figured out how to make a good one for Samsung's ridiculously-curved screens, but I'm hoping that the lesser-curved digitizer on the v30 will be less of an issue.
I'm not particularly picky about brands, but I will say that if it comes down to getting a rubber film instead, I'll probably get a Skinomi one. It worked pretty well for my pre-Quark phones (though obviously isn't as nice to the touch as glass is).

I got the LG v20 and I order the screen protector after the phone but luckily it came with one pre-installed. I want to the v30 but am in the process of porting the v30 to the v20 and I always recommend a temper glass protection. Why? just because of being human and human error and you never know, somebody could bump you and accidentally dropped it. But to each it owns. $700+ for a phone is a lot, the v20 was $850+, especially if its main purpose is to call and text. That's why I always put cases and screen protector on my mini laptop. But I know myself and I was try to prevent things before it's to late...Better safe than sorry

I plan on getting the V30 (coming from 2015 Moto X Pure) and I always get a screen protector. I don't put my phone in my pockets but always in my belt clip holster. There's times where I have fumbled with my phone and it has fallen or it being on the desk and it takes an accidental tumble or just pure accidental bumping into something.
All my portable electronics have tempered glass i.e. iPads, digital cameras
All it takes is that one lucky drop.

i just bought the Wimaha one from Amazon.. hopefully it fits well

Waiting to see if there's one on it like the V20 had. I still have the one that came with the V20 on it. Had it since it came out. Somehow I suspect the V30 won't have one though as I bet they want to show off that screen.

I went with the GLASS-M one on Amazon. Hoping it works well on the v30. Will post back after it shows up tomorrow.
Edit,
Great protector from what I can tell. Easy to adhere

scootier said:
I went with the GLASS-M one on Amazon. Hoping it works well on the v30. Will post back after it shows up tomorrow.
Click to expand...
Click to collapse
Is it US amazon ? Did you notice the 2 reviews on amazon about that screen protector ? One is written in 2015 and one in 2016 , AND marked as verified purchase by amazon . LOL I wold rather wait for this one and see
https://www.bhphotovideo.com/c/product/1361013-REG/gadget_guard_ggbiplc208lg02a_black_ice_glass_screen.html

Yeah I did .... honestly tried to find one that looked like the one from Verizon. No idea how amazon let them review it unless it was a different product listing and somehow got updated?
Anyways, easy returns if it doesn’t work. But their other protectors (other devices) looked to get good reviews.

I got this.... LG V30 Screen Protector, Vigeer [ 2 Pack ] [0.3mm, 2.5D] on amazon... it doesn't connect at the rop right edge... sucks.... I hope I can return...

I picked up this same model and I'm not very happy with it. There's a dot grid that's visible when around bright overhead lights (office lighting, sun, etc) and the oleophobic coating does not seem to perform very well. I just placed the screen protector yesterday and I find myself constantly wiping the screen to remove fingerprints.

scootier said:
I went with the GLASS-M one on Amazon. Hoping it works well on the v30. Will post back after it shows up tomorrow.
Edit,
Great protector from what I can tell. Easy to adhere
Click to expand...
Click to collapse
Full screen protection and case friendly? I hate the ones that don't go side to side cause they are ugly will watching videos and even just using keyboard they add a lip to the side

thecobra said:
I picked up this same model and I'm not very happy with it. There's a dot grid that's visible when around bright overhead lights (office lighting, sun, etc) and the oleophobic coating does not seem to perform very well. I just placed the screen protector yesterday and I find myself constantly wiping the screen to remove fingerprints.
Click to expand...
Click to collapse
I bought this as well and it is trash. About every third tap did not register. Very frustrating. I also tried one of the plastic stick on type like I had for my Galaxy S5, but it never kept contact near the curved edge. Still looking for one that isn't crap.

just picked up this one below;
Spigen LG V30 Screen Protector NeoFlex / 2 Pack / Wet Application for LG V30
Wet application type but well see how it goes!

Anybody know about the Qmaddix "liquid glass" stuff. Seems people swear its the greatest or its "snake oil". Verizon Reseller is pushing it hard!
http://www.qmadix.com/screen-protection/invisible-first-defense-liquid-glass.asp

kevlo911 said:
i just bought the Wimaha one from Amazon.. hopefully it fits well
Click to expand...
Click to collapse
I just put it on - it fits great. has some dots in it i wasnt expecting but once it is on it is fine.
https://www.amazon.com/gp/product/B074RD3WBD/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

Zeromus2003 said:
Anybody know about the Qmaddix "liquid glass" stuff. Seems people swear its the greatest or its "snake oil". Verizon Reseller is pushing it hard!
http://www.qmadix.com/screen-protection/invisible-first-defense-liquid-glass.asp
Click to expand...
Click to collapse
Judging by the reviews it's either deal or really hard to do correctly
---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------
kevlo911 said:
I just put it on - it fits great. has some dots in it i wasnt expecting but once it is on it is fine.
https://www.amazon.com/gp/product/B074RD3WBD/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just sent that one back. Doesn't fit the phone fully. No way can I stand texting or watching videos with that step in my phone work 2 dif levels of glass. But it did seem to be same quality as the rest.
---------- Post added at 12:09 AM ---------- Previous post was at 12:05 AM ----------
This issue of finding a nice screen protector is one of the reasons I'll probably be going back to my g6

Just ordered this one myself. LG V30 Screen Protector (Case Friendly)[2-Pack], Skinomi TechSkin Full Coverage Screen Protector for LG V30 Clear HD Anti-Bubble Film https://www.amazon.com/dp/B073RR5Y2G/ref=cm_sw_r_cp_apa_dQ.3zbGEHVTDB

Anything goodm
Any news on a good screen protector?