Database Info

[Q] .md5 files always invalid

I am trying too root my Verizon Galaxy s3, but every time I run the VRALEC.bootchain.md5 or any .md5 file in this package in ODIN. It just gives this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> VRALEC.bootchain.tar (7).md5 is invalid.
<OSM> End...
I have re downloaded the .md5 files multiple times but I keep getting the same error. Does anyone know a fix too this?
Also link too where I am downloading the .md5's http://forum.xda-developers.com/showthread.php?t=2046439

For starters, it should end ".tar.md5" The "(7)" tells me you tried downloading this seven times and it failed six times because of that. Delete those other downloads then try again. Are you using Odin 3.07? Have you tried download from a separate computer?
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
For starters, it should end ".tar.md5" The "(7)" tells me you tried downloading this seven times and it failed six times because of that. Delete those other downloads then try again. Are you using Odin 3.07? Have you tried download from a separate computer?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Oh haha that was the problem. I had too delete the download number. Thank you a lot for the help!

wrong thread

[BOOTLOOP FIX][Stock firmware][GT-S7500]Repair Soft-Bricked Galaxy Ace Plus GT-S7500

GT-S7500 BootLoop Fixing​
Hello My Friends !!
Today i am gonna show you 2 ways on how to fix a bootloop on GT-S7500 galaxy Ace plus.
These methods are also for those who soft-bricked there phones.
Click to expand...
Click to collapse
Method 1(easy):
SomeTimes,when you are trying to flash a Rom or making a nandroid backup and there is no memory space,you face a CWM bootloop (Rebooting to recovery again and again) and thats not a hard thing to fix,because you have only flash your recovery or any other recovery again !! Thatss very simple Hein??!
Click to expand...
Click to collapse
Method 2(Advanced):
This Method is good when you Stuck at the Samsung Boot screen,The phone vibrates and then freez at the boot screen.
Fixing this is by flashing your original stock firmware.
Follow Me:
1)First you have to download the firmware from Here
2)Download Odin v 1.85 from attachements
3)Turn Off your phone and boot into download mode (Volume down+Home+Power) And Press volume Up to continue
Now your ace plus should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4)Now on your PC,open odin v.185 then select PDA and choose the firmware hat you have downloaded (Home.tar.md5) like this:
5)Now Connect your phone via USB Cable to your computer , ID:COM must turn Yellow like this:
6)Make sure That ONLY "Auto Reboot" And "F.reset Time" are checked ,and Repartition is UNCHECKED (Look to the pic)
7)Finaly,Hit the Start Button And the process to finish (About 3 min) and Odin will say PASS in Green.
Flashing Stock Firmware Success.
Click to expand...
Click to collapse
Notes:First Boot May Take Some Time
It is advisble to do a Data reset after flashing
If Odin does nor recognize your phone,So install Samsung USB Drivers Or try with a Diffrent version of Odin
Disable your antivirus and Kies before Starting the mission
Click to expand...
Click to collapse
Hit Thanks If I helped You!

Need Help?
danyznd123 said:
Hi,
Have you ever stuck in a cwm bootloop(reboot to clockworkmod again and again) or stuck at the boot screen in your GT-S7500?
I will show you how to fix it. (ONLY GT-S7500 NO OTHER VARIANTS !)
There is only one way to fix it:reinstall your stock firmware.
First,download needed files here:1)The firmware from here http://www.sammobile.com/firmwares/ and type in the Search option "GT-S7500" and choose your country
And if you want another firmware to another country search by google or www.samsung-updates.com This site is better due the shutdoen of hotfile,samsung-updates uploaded firmware to mirrors
2)odin3 v1.85
Extract files.
Now turn off you phone and go to download mode by pressing volume down+home+power
Connect your phone to your computer and open odin3.Wait until ID:COM turn yellow.
"Auto reboot" and "F.reset time" must be checked and "Re-partion" must be UNCHECKED.
Now press PDA in odin and choose the firmware that you have downloaded(the stock firmware must be a .tar or .md5 file) and press START.
Wait 4 to 5 minute to finish the process.And when it is finished you will see "PASS" in odin.
Now your phone will reboot.Wait until your phone finish rebooting and unplug your ace +
Thats it!your phone will turn on again now! Press thanks if i helped you.
Enjoy!!!:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!

danyznd123 said:
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!
Click to expand...
Click to collapse
Does anyone needs help??
Just comment!!

18 downloads and only 2 thanks?!
Btw I am now a senior! :angel:

lol

Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that

mon_iker said:
Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that
Click to expand...
Click to collapse
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...

danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stock firmware...
Click to expand...
Click to collapse
its pretty obvious that if your phone doesn't boot you have to flash stock
or even restore a backup....that is easier

Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?

HasbullRedBull said:
Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?
Click to expand...
Click to collapse
Yes jsut unzip the file that you have downloaded and you will get 2 files:
1)the firmware .tar.md5
2)A dll file
The .tar.md5 file is the firmware to put on odin

Thank you for your help!!! :good::good:

First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"

Psychobay said:
First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"
Click to expand...
Click to collapse
Thats not a big problem:
Try these tow things:
1)Try with a different version of odin (like 3.04/1.87 ...)
2)If it didn't work you have to install samsung drivers or install kies

Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:

Psychobay said:
Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
youe welcome

thread updated

Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2

magico18 said:
Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2
Click to expand...
Click to collapse
You r welcom

bootloop fix zip
danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...
Click to expand...
Click to collapse
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment FIX_BOOTLOOP.zip

amritanshusingh3 said:
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment 2671263
Click to expand...
Click to collapse
Yes but this zip is only for cwm v6

[Q] [HELP] Stuck at 'Samsung galaxy core 2' logo

So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
i have the same problem!!!!!
please if anyone knows help
---------- Post added at 11:32 AM ---------- Previous post was at 10:43 AM ----------
i found the solution my friend,you have to let the phone boot with the old digitizer,then when the boot its complete,remove the lcd and digitizer,replace with the new digitizer but be carefull the phone has to stay on .and conect back the lcd and its works but if you reboot the phone will stuck again.this is my short fix.
i hope i helped

Hi guys same problem
have you found a solution ?

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
did u wipe the data?

Azhero said:
did u wipe the data?
Click to expand...
Click to collapse
No, i couldn't access anything, and i haven't found any solution.. sold the phone as is.

electrified said:
No, i couldn't access anything, and i haven't found any solution.. sold the phone as is.
Click to expand...
Click to collapse
do you still have the same problem? i fix somebody's phone last week with this kind of issue...

alexutpangsut said:
do you still have the same problem? i fix somebody's phone last week with this kind of issue...
Click to expand...
Click to collapse
Yep i got this problem i can rec video
this all logs
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G355HXXU0ANJ3_G355HOXE0ANJ3_G355HXXU0ANJ3_REV04_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
______________________________________________________________________________
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> AP_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> CP_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> CSC_OXE_G355HOXE0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
______________________________________________________________________________
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
View attachment 3245449

Similar Problem [PLEASE HELP]
electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
I am experiencing a similar problem with my Samsung Galaxy Core Prime.
I used Kingroot to root my device. I then continued to attempt to install a custom recovery which i eventually accomplished about three hours later, and then attempted to install a custom rom(I don't know if it worked or not!) 9 hours later, I tried to reboot my device. When i turned my phone back on, the screen froze and would not finish booting. (Volume Up+Home+Power and Volume Down+Home+Power both work. I can select different options in bootloader, but when i go to the download page it also freezes)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

aadonald55 said:
I am experiencing a similar problem with my Samsung Galaxy Core Prime.
I used Kingroot to root my device. I then continued to attempt to install a custom recovery which i eventually accomplished about three hours later, and then attempted to install a custom rom(I don't know if it worked or not!) 9 hours later, I tried to reboot my device. When i turned my phone back on, the screen froze and would not finish booting. (Volume Up+Home+Power and Volume Down+Home+Power both work. I can select different options in bootloader, but when i go to the download page it also freezes)
Click to expand...
Click to collapse
Don't worry
Just download stock firmware from sammobile.com and odin v3.0.9 and download samsung mobile drivers for pc. Then open download mod by pressing vol down +power+ home button and then open odin and choose downloaded firmware as pda and flash it. Now you can see a blue coloured progress bar on download mod. After it completes, it will reboot your device and it will boot successfully
Sent from my GT-I8262 using XDA-Developers mobile app

TEOKARAFOU said:
i have the same problem!!!!!
please if anyone knows help
---------- Post added at 11:32 AM ---------- Previous post was at 10:43 AM ----------
i found the solution my friend,you have to let the phone boot with the old digitizer,then when the boot its complete,remove the lcd and digitizer,replace with the new digitizer but be carefull the phone has to stay on .and conect back the lcd and its works but if you reboot the phone will stuck again.this is my short fix.
i hope i helped
Click to expand...
Click to collapse
it's work....thx...just use old digitizer first...then change with new digitizer..phone stay on
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
lupo77 said:
Hi guys same problem
have you found a solution ?
Click to expand...
Click to collapse
just use old digitizer / touchscreen .... and you can do hard reset (power + up key + home key)
......try change new touchscreen phone stay on (insert battery)

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
See the phone model back to the cover.. Maybe you have galaxy core 2 sm-355hn and you have ordered digitizer for sm-355h that it doesn't fit

TWRP Recovery 2.8.4.0 & 2.8.5.0 for Samsung Galaxy Core 2 SM-G355H/G355HN

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Visit galaxynroms.blogspot.com.
Disclaimer:
I/XDA/is not responsible for any kind of damage to your device,
or in case it explodes, etc.
Please use it at your own risk! Whatever you do with your phone it's your own choice!
Click to expand...
Click to collapse
Requirement:
1. PC/Laptop/Netbook.
2. Odin3 v3.09 or any other
3. TWRP_SM-G355H_V2.8.4.0.7z
4. TWRP_v2.8.4.0_by_Dhruvit_(flashable).zip
5. Samsung USB Driver
6. USB Cable.
Click to expand...
Click to collapse
How to install:
Tutorial 1 : By Odin
1. Install Samsung USB Driver on your PC/Laptop or something else
2. Extract odin and TWRP_SM-G355H_V2.8.4.0.7z in the same folder
3. Open Odin
4. Reboot phone in Download Mode by pressing and hold Home + Power + Volume Down buttons)
5. Connect phone and wait until detected on odin
6. Add the recovery.tar.md5 file to AP / PDA
7. Make sure re-partition is NOT ticked
8. Click the start button, sit back and wait a few minutes
9. Wait until the flashing process is complete.
Click to expand...
Click to collapse
Tutorial 2 : By Stock Recovery / CWM
1. Copy TWRP_v2.8.4.0_by_Dhruvit_(flashable).zip to External SD.
2. Go to Stock Recovery / CWM.
3. Install zip -> from sdcard.
4. Choose TWRP_v2.8.4.0_by_Dhruvit_(flashable).zip and wait until finished.
5. Reboot system now.
Click to expand...
Click to collapse
How to go in Recovery:
1. Turn off your phone
2. Press and hold together Volume up + Home + Power buttons until phone vibrate then let go.
3. Now you are in recovery mode.
Click to expand...
Click to collapse
Warning:
Please do not try to repartition ext-sd with TWRP.
Credits goes to:
- TeamWin
- OmniROM (for bootable recovery)
- CyanogenMod (for sources)
- Y300-0100 (for device configs)
- Me (Dhruvit Pokharna)
- And all who contributed
Version Information
Status: Working
Created 2015-01-25
Last Updated 2015-01-25
IF YOU WANNA RESHARE THIS RECOVERY, PLEASE FOLLOW THIS RULES :
1. DON'T USE SHORTENER LINK (i.e. adfly, adfoc, etc)
2. DONT REUPLOAD MY TWRP BEFORE ASKING PERMISSIONS
Update- 2.8.5.0
- TWRP_SM-G355H_V2.8.5.0_By_Dhruvit_(odin).7z
- TWRP_v2.8.5.0_by_Dhruvit_(flashable).zip
Init.d support - Link
Do follow on Instagram- instagram.com/the_dhruv7

Dont forget to click thanks button

pls. OP can u attach the recovery here. . .I couldn't download from your link. .

I upload it on 4shared
http://www.4shared.com/archive/Y6dbMcbAba/TWRP_SM-G355H_V2840.html

@Dhruvit Pokharna : how do you enable cpu temperature on TWRP ?

Device configs - https://github.com/Y300-0100/twrp_samsung_kanas3gnfcxx?files=1
Android bootable recovery folder - https://github.com/omnirom/android_bootable_recovery?files=1

You should use Y300-0100 device config

I have some error when flashing TWRP
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

site - http://galaxynroms.weebly.com/twrp-touch-recovery-for-samsung-galaxy-core-2-sm-g355hg355hn.html

hahanhata123 said:
I have some error when flashing TWRP
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
take your mobile battery out and in and retry flashing procedure

click thanks if i helped

Worked or not

Dhruvit Pokharna said:
take your mobile battery out and in and retry flashing procedure
Click to expand...
Click to collapse
I have tried 5 times but it not work

Wait i am making flashable zip for you

Here

Try this and tell me if it works for you or not if worked then please hit thanks button

Please any comment

And may be you must have root to install from stock recovery

Dhruvit Pokharna said:
Try this and tell me if it works for you or not if worked then please hit thanks button
Click to expand...
Click to collapse
It work, thank you so much!

My pleasure

Sim Unlocked S8+. Is it possible to flash unbranded firmware & XAA CSC without root?

Sim Unlocked S8+. Is it possible to flash unbranded firmware & XAA CSC without root?
Hello all. Thanks to all the developers spending countless hours and sharing with us. It's been some time since I have rooted and installed custom roms on an android (circa Evo Shift 4G times).
I've discovered this post:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
It makes it seem as if it is possible to install the SM-G955U1 using Odin without issue. I would like to keep my phone unrooted, standard bootloader, knox enabled and allow for OTA updates.
My question is as I am currently in India would there be an advantage to using a CSC for the region over XAA? (I'll be in India for another 45 days, then heading to Georgia, then Czechnia). I've seen the posts about flashing CSC's to enable WiFi calling and VoLTE, but I'm assuming that might be due to using a branded firmware phone rather than unbranded?
My primary aim is to eliminate all of the T-Mobile bloat and provisioning apps in hopes that it would improve my LTE speeds. Currently they're generally below what Airtel is rating my connection at (rated for 4-7 mbps, avg 1-3mbps). I notice that my battery life is just terrible ever since I left the USA and started using the local cell carriers in SE Asia.
I noticed this posting about opening up additional LTE bands on the phone, but need to research which bands in India are utilized, vs what my phone allows.
https://forum.xda-developers.com/galaxy-s8+/how-to/qualcomm-phones-add-lte-band-using-qxdm-t3785458
Any input or direction would be appreciated.
Does TMB/XAA/TMB (below) indicate that the phone has been sim unlocked from TMB's network? Would flashing unbranded firmware SM-G955U1 or custom CSC mess the sim unlocking up?
Model: SM-G955U
One UI: 1.0
Baseband: G955USQU7DSL3
Service provider SW ver: SAOMC_SM-G955U_OYN_TMB_PP_0026
98895a3739595a3653
TMB/XAA/TMB
?

Curious, what are the differences between CSC XAA & XAS? I read in one place the XAS might be a developer build?

From a reddit post 2 years ago:
"Samsung is consolidating its firmwares into multi-CSC firmwares. All of the G950U1 models use the same multi-CSC firmware, OYM. When you flash a multi-CSC that includes your existing CSC, it doesn't actually change the CSC, regardless of which variant of OYM you flash. So if your phone was already using XAA and you try to flash TMB, you'll keep XAA because both are included in OYM. Use Phone Info to check what your active CSC is. It will more than likely be XAA with TMB listed among the available CSCs."
https://www.reddit.com/r/GalaxyS8/comments/6jvb3b/all_g950u1_firmware_downloads_are_xaa_unlocked/
My active CSC is TMB, how can I change my CSC to XAA instead after flashing firmware "Galaxy S8+ SM-G955U1 XAA Unknown G955U1UEU7DSL5"?
When I try to use any secret codes in the samsung dialer eg: *#1234*# or *#272*imei# etc, nothing happens. If I hit the dial button it pops up a message stating: "Running USSD code" then provides error message "connection problem or invalid MMI code."
Going to flash the firmware later tonight as soon as it downloads over my tethered connection.

Having issues with Odin failing immediately.
FROM ODIN
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5933 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Here is the info from my bootloader in Download Mode
Carrier: TMB
RPMB fuse blown
RPMB PROVISIONED
Current Binary: Samsung Official
FRP Lock: OFF
Warranty Void: 0x0
Qualcomm Secure Boot: Enabled
RP SWREV: B7(2,1,1,1,1) K6 S7
Secure Download: Enabled
Click to expand...
Click to collapse
Prerequisites
Held down Power + Vol Down + Bixby to reboot into Download Mode
Used SamFirm to download SM-G955U1_1_20200131184615_sapzy2x6yh_fac
Uninstalled Smart Switch
Using USB 2.0 slot (also tried USB 3.0 slot)
Do not have original data cable but purchased a high quality data cable.
Odin x3.14.1 3B_Patched (also tried un-patched Odin with same result)
Samsung USB Drivers v1.7.23.0
Removed Google Accounts
No Samsung Account
FRP Lock: OFF
Disabled Screen Lock
Click to expand...
Click to collapse
Any ideas here? Could not using the stock usb data cable really be preventing me from progressing with the firmware flash??!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

xFilthyxJesusx said:
Having issues with Odin failing immediately.
Any ideas here? Could not using the stock usb data cable really be preventing me from progressing with the firmware flash??!
Click to expand...
Click to collapse
You will need ver 7 ( or higher ) binary ( bootloader ). 5th number from right of firmware name.
Failing at setup connection on odin
Make sure ( according to your screen shot ) odin sees your phone. Should shows up upper left show up as com port in box that says ID:COM
Be in download mode
Other things you can try:
https://forum.xda-developers.com/galaxy-s9/help/s9-u1-flash-instant-odin-error-t4016919

Thank you for your reply.
I am using Intel system.
In screen shot I had unugged device after fail. Prior Odin had com port 05, and there was a blue box.
Have tried plug and unplug. May need a new data cable. Will try and find another Intel system to use.
Both phone and firmware I am flashing are boot loader 7
Current: G955USQU7DSL3
Flashing: G955U1UEU7DSL5
Would flashing combination file (BL5 Nougat) then upgrading to BL7 maybe work better? Will try that if I cannot get this to work with another data cable and pc

xFilthyxJesusx said:
Thank you for your reply.
I am using Intel system.
In screen shot I had unugged device after fail. Prior Odin had com port 05, and there was a blue box.
Have tried plug and unplug. May need a new data cable. Will try and find another Intel system to use.
Both phone and firmware I am flashing are boot loader 7
Current: G955USQU7DSL3
Flashing: G955U1UEU7DSL5
Would flashing combination file (BL5 Nougat) then upgrading to BL7 maybe work better? Will try that if I cannot get this to work with another data cable and pc
Click to expand...
Click to collapse
Combination and stock firmware work in the same repects with bootloader version number. ie if you on ver 7 bootloader you cannot flash anything lower ( 6 and under ).