Database Info

[Q] Leaked P3100 Stock ROM

Hi All,
I got hold of the leaked P3100 Stock ROM from Sammobile , googling for "P3100XWALD2_P3100OJVALD3_OJV" courtesy Hotfile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I see within the download 4 md5 package for pushing through ODIN 1.85.
Need confirmation what goes where in ODIN for pushing this over serial interface?
Please help!

Some more Googling gave me the following:
1. Bootloader is the module that loads built-in recovery ( Stock / CWM ).
2. PDA is the firmware version that contains the android OS and system apps. ( Platform/PDA )
3. Phone is the modem version ( Modem/Radio ) - Secondary firmware that controls the network connectivity (2G/3G, wireless & Bluetooth).
4. CSC is the connection data could be network locked or supporting a specific region.
When you are updating they should all be updated to whatever firmware you choose via ODIN in md5 format.
If you are using odin they get flashed separately.

Flashing through ODIN 1.85 took 3:54 & top box said "FACCTORYFS".
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_P3100XWALD2_CL448962_REV04_user_low_ship.tar.md5 is valid.
<OSM> PLATFORM_P3100XWALD2_CL448962_REV04_user_low_ship.tar.md5 is valid.
<OSM> MODEM_P3100XXLD4_REV_04_CL1128355.tar.md5 is valid.
<OSM> CSC_OJV_P3100OJVALD3_CL448962_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> MLO
<ID:0/020> NAND Write Start!!
<ID:0/020> Sbl.bin
<ID:0/020> param.lfs
<ID:0/020> boot.img
<ID:0/020> recovery.img
<ID:0/020> system.img
<ID:0/020> userdata.img
<ID:0/020> modem.bin
<ID:0/020> Transmission Complete..
<ID:0/020> Now Writing.. Please wait about 2 minutes
<ID:0/020> Receive Response form LOKE
<ID:0/020> cache.img
<ID:0/020> hidden.img
<ID:0/020> RQT_CLOSE !!
<ID:0/020> RES OK !!
<ID:0/020> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/020> Removed!!
Just realised bootloader may not be be reqd for this P3100 message during boot is nomore just GTab2...which is OK.
GSM functionality confirmed & this is P3100 working ROM using ODIN.

hello
could you give me your lienpour stock rom? thank you.
edit:it's good I found;-)

Hello,
I just purchased a P3100 here in China, but alas all of the Google apps are inaccessible. Thus, I flashed ClockworkMod Recovery and then the cwm-root-gtab2.zip Root Package. I then loaded the four md5 files into Odin and tried to run them all at once, but it failed. However, if I load and run just the Platform/PDA, then it successfully installs and I get a nice clean install with full access to Google apps. If I tried to run the other three md5 files individually, it also fails. But because I nevertheless have full overall functionality (including my 3G through my SIM card), then I shouldn't worry too much about the other three md5 files failing to install?

Actually, I've just noticed that my total disc space is 1.97GB, 687MB of total RAM, and 1.9GB of device memory. So something is obviously amiss.
Prcls77 said:
Hello,
I just purchased a P3100 here in China, but alas all of the Google apps are inaccessible. Thus, I flashed ClockworkMod Recovery and then the cwm-root-gtab2.zip Root Package. I then loaded the four md5 files into Odin and tried to run them all at once, but it failed. However, if I load and run just the Platform/PDA, then it successfully installs and I get a nice clean install with full access to Google apps. If I tried to run the other three md5 files individually, it also fails. But because I nevertheless have full overall functionality (including my 3G through my SIM card), then I shouldn't worry too much about the other three md5 files failing to install?
Click to expand...
Click to collapse

Prcls77 try flashing Singapore image for P3100 from http://www.sammobile.com/firmware
This single md5 image had PDA & CSC included.
I suggest you wipe data using CWM & wipe all cache , reboot to download mode
Push the Singapore image & let it reboot , check sdcard partition size, if you see size is less, just run the stock factory reset from recovery menu...you should get back your original setting.

thedeamon said:
Prcls77 try flashing Singapore image for P3100 from XlinkX
This single md5 image had PDA & CSC included.
I suggest you wipe data using CWM & wipe all cache , reboot to download mode
Push the Singapore image & let it reboot , check sdcard partition size, if you see size is less, just run the stock factory reset from recovery menu...you should get back your original setting.
Click to expand...
Click to collapse
thedeamon,
I'm currently downloading the Singapore version of 4.04; the file name is P3100XXBLE3_P3100OLBBLE2_XSP.zip (couldn't find 4.03). Is this the one you are referring to? If I unzip this, will it be the single .md5 image you are referring to? If yes, do I load it in Odin as PDA or CSC? Or do I just install the whole .zip file in download mode from my external SD card?
Thank you kindly in advance.
P.

Extract the md5 on a folder in your PC/Laptop, push the file using ODIN 1.85 keeping phone in download mode.
On the same session in ODIN, you may choose to repartition the TAB with correct P3100 pit file from the link below:
http://www.mod2xtreme.com/showthread.php?11722-Download-OPS-amp-PIT-files ( ensure to tick "Re-partition" & load the correct P3100 PIT file )
This will ensure you have a clean factory image loaded in the TAB.
Hope this helps!

Thanks thedaemon!
I wiped data/factory reset and wiped cache through CwM. I then flashed the .md5 file as PDA in Odin along with the pit file. The pit file failed, but the .md5 file was successful and I now have a clean version of 4.0.4. I now have 4.59GB total internal stora space which is certainly better than the 2GB. Overall I'm pretty happy and can l live with this. However, I'm now considering flashing CyanogenMod 9!

[BOOTLOOP FIX][Stock firmware][GT-S7500]Repair Soft-Bricked Galaxy Ace Plus GT-S7500

GT-S7500 BootLoop Fixing​
Hello My Friends !!
Today i am gonna show you 2 ways on how to fix a bootloop on GT-S7500 galaxy Ace plus.
These methods are also for those who soft-bricked there phones.
Click to expand...
Click to collapse
Method 1(easy):
SomeTimes,when you are trying to flash a Rom or making a nandroid backup and there is no memory space,you face a CWM bootloop (Rebooting to recovery again and again) and thats not a hard thing to fix,because you have only flash your recovery or any other recovery again !! Thatss very simple Hein??!
Click to expand...
Click to collapse
Method 2(Advanced):
This Method is good when you Stuck at the Samsung Boot screen,The phone vibrates and then freez at the boot screen.
Fixing this is by flashing your original stock firmware.
Follow Me:
1)First you have to download the firmware from Here
2)Download Odin v 1.85 from attachements
3)Turn Off your phone and boot into download mode (Volume down+Home+Power) And Press volume Up to continue
Now your ace plus should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4)Now on your PC,open odin v.185 then select PDA and choose the firmware hat you have downloaded (Home.tar.md5) like this:
5)Now Connect your phone via USB Cable to your computer , ID:COM must turn Yellow like this:
6)Make sure That ONLY "Auto Reboot" And "F.reset Time" are checked ,and Repartition is UNCHECKED (Look to the pic)
7)Finaly,Hit the Start Button And the process to finish (About 3 min) and Odin will say PASS in Green.
Flashing Stock Firmware Success.
Click to expand...
Click to collapse
Notes:First Boot May Take Some Time
It is advisble to do a Data reset after flashing
If Odin does nor recognize your phone,So install Samsung USB Drivers Or try with a Diffrent version of Odin
Disable your antivirus and Kies before Starting the mission
Click to expand...
Click to collapse
Hit Thanks If I helped You!

Need Help?
danyznd123 said:
Hi,
Have you ever stuck in a cwm bootloop(reboot to clockworkmod again and again) or stuck at the boot screen in your GT-S7500?
I will show you how to fix it. (ONLY GT-S7500 NO OTHER VARIANTS !)
There is only one way to fix it:reinstall your stock firmware.
First,download needed files here:1)The firmware from here http://www.sammobile.com/firmwares/ and type in the Search option "GT-S7500" and choose your country
And if you want another firmware to another country search by google or www.samsung-updates.com This site is better due the shutdoen of hotfile,samsung-updates uploaded firmware to mirrors
2)odin3 v1.85
Extract files.
Now turn off you phone and go to download mode by pressing volume down+home+power
Connect your phone to your computer and open odin3.Wait until ID:COM turn yellow.
"Auto reboot" and "F.reset time" must be checked and "Re-partion" must be UNCHECKED.
Now press PDA in odin and choose the firmware that you have downloaded(the stock firmware must be a .tar or .md5 file) and press START.
Wait 4 to 5 minute to finish the process.And when it is finished you will see "PASS" in odin.
Now your phone will reboot.Wait until your phone finish rebooting and unplug your ace +
Thats it!your phone will turn on again now! Press thanks if i helped you.
Enjoy!!!:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!

danyznd123 said:
IF someone need a help or need a firmware just comment and i will give you the link!
And if you fail to do the procedure just say and I will reply!!
Press Thanks if I helped you!!!!
Click to expand...
Click to collapse
Does anyone needs help??
Just comment!!

18 downloads and only 2 thanks?!
Btw I am now a senior! :angel:

lol

Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that

mon_iker said:
Er @danyznd123, all you have shown here is how to flash stock ROM, there already is a guide for that
Click to expand...
Click to collapse
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...

danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stock firmware...
Click to expand...
Click to collapse
its pretty obvious that if your phone doesn't boot you have to flash stock
or even restore a backup....that is easier

Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?

HasbullRedBull said:
Is it zip file or tar file to put in odin? Because i downloaded the firmware and it's zip file. Can you help me?
Click to expand...
Click to collapse
Yes jsut unzip the file that you have downloaded and you will get 2 files:
1)the firmware .tar.md5
2)A dll file
The .tar.md5 file is the firmware to put on odin

Thank you for your help!!! :good::good:

First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"

Psychobay said:
First off: This is my very first try.
Not sure if I did something wrong or I'm just too stupid to follow the instructions..
So, I visited that firmware-site, downloaded the german firmware and Odin.
turned my phone on via download mode and connected my phone to my laptop and started Odin.
no problems so far until Odin is running.. the ID:COM-thingy doesn't show anything up at all so I thought I might just click on "Start" anyway
log: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0) ,
didn't work either. (I'm a new member so I can't post a link/picture of my Odin)
In download-mode (on my phone-screen) it says:
[ODIN3]
PRODUCT: GT-S7500
VERSION: S7500XXMC2
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
"Downloading... Do not turn off target !!"
Click to expand...
Click to collapse
Thats not a big problem:
Try these tow things:
1)Try with a different version of odin (like 3.04/1.87 ...)
2)If it didn't work you have to install samsung drivers or install kies

Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:

Psychobay said:
Ok, the ID:COM thingy is fixed now, thanks a lot!
Kies is updated to the latest version, it says FAIL! in Odin now, though.
Any way to fix that? I guess followed your steps corretly.. turned my phone on in download mode, pressed vol+, connected it to the cable.
Mobile says "downloading..." and the log says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500XXMC2_S7500DBTMC1_S7500XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
---------- Post added at 10:27 PM ---------- Previous post was at 10:15 PM ----------
Ignore my last post, just tried it with Odin 3.4 and IT FINALLY WORKS!!!!
IM SO THANKFUL RIGHT NOW!!!
THANKS SOOOO MUCH, I LOVE YOU SIR! :laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
youe welcome

thread updated

Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2

magico18 said:
Thanks a lot. It works :thumbup:
Inviato dal mio GT-S7500 con Tapatalk 2
Click to expand...
Click to collapse
You r welcom

bootloop fix zip
danyznd123 said:
Yes but the beginners will not know that to fix the cwm bootloop they have to flash the stck firmware...
Click to expand...
Click to collapse
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment FIX_BOOTLOOP.zip

amritanshusingh3 said:
sir here i found this zip 1 or 2 weeks ago in some thread on xda developers only it was an attachment with a custom rom(its name i dont remember,but surely its not mine) i tried and it worked every time when i was stuck in bootloop
download zip here View attachment 2671263
Click to expand...
Click to collapse
Yes but this zip is only for cwm v6

[Q] [HELP] Stuck at 'Samsung galaxy core 2' logo

So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
i have the same problem!!!!!
please if anyone knows help
---------- Post added at 11:32 AM ---------- Previous post was at 10:43 AM ----------
i found the solution my friend,you have to let the phone boot with the old digitizer,then when the boot its complete,remove the lcd and digitizer,replace with the new digitizer but be carefull the phone has to stay on .and conect back the lcd and its works but if you reboot the phone will stuck again.this is my short fix.
i hope i helped

Hi guys same problem
have you found a solution ?

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
did u wipe the data?

Azhero said:
did u wipe the data?
Click to expand...
Click to collapse
No, i couldn't access anything, and i haven't found any solution.. sold the phone as is.

electrified said:
No, i couldn't access anything, and i haven't found any solution.. sold the phone as is.
Click to expand...
Click to collapse
do you still have the same problem? i fix somebody's phone last week with this kind of issue...

alexutpangsut said:
do you still have the same problem? i fix somebody's phone last week with this kind of issue...
Click to expand...
Click to collapse
Yep i got this problem i can rec video
this all logs
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G355HXXU0ANJ3_G355HOXE0ANJ3_G355HXXU0ANJ3_REV04_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
______________________________________________________________________________
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> AP_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> CP_G355HXXU0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> CSC_OXE_G355HOXE0ANHB_2631775_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
______________________________________________________________________________
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
View attachment 3245449

Similar Problem [PLEASE HELP]
electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
I am experiencing a similar problem with my Samsung Galaxy Core Prime.
I used Kingroot to root my device. I then continued to attempt to install a custom recovery which i eventually accomplished about three hours later, and then attempted to install a custom rom(I don't know if it worked or not!) 9 hours later, I tried to reboot my device. When i turned my phone back on, the screen froze and would not finish booting. (Volume Up+Home+Power and Volume Down+Home+Power both work. I can select different options in bootloader, but when i go to the download page it also freezes)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

aadonald55 said:
I am experiencing a similar problem with my Samsung Galaxy Core Prime.
I used Kingroot to root my device. I then continued to attempt to install a custom recovery which i eventually accomplished about three hours later, and then attempted to install a custom rom(I don't know if it worked or not!) 9 hours later, I tried to reboot my device. When i turned my phone back on, the screen froze and would not finish booting. (Volume Up+Home+Power and Volume Down+Home+Power both work. I can select different options in bootloader, but when i go to the download page it also freezes)
Click to expand...
Click to collapse
Don't worry
Just download stock firmware from sammobile.com and odin v3.0.9 and download samsung mobile drivers for pc. Then open download mod by pressing vol down +power+ home button and then open odin and choose downloaded firmware as pda and flash it. Now you can see a blue coloured progress bar on download mod. After it completes, it will reboot your device and it will boot successfully
Sent from my GT-I8262 using XDA-Developers mobile app

TEOKARAFOU said:
i have the same problem!!!!!
please if anyone knows help
---------- Post added at 11:32 AM ---------- Previous post was at 10:43 AM ----------
i found the solution my friend,you have to let the phone boot with the old digitizer,then when the boot its complete,remove the lcd and digitizer,replace with the new digitizer but be carefull the phone has to stay on .and conect back the lcd and its works but if you reboot the phone will stuck again.this is my short fix.
i hope i helped
Click to expand...
Click to collapse
it's work....thx...just use old digitizer first...then change with new digitizer..phone stay on
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
lupo77 said:
Hi guys same problem
have you found a solution ?
Click to expand...
Click to collapse
just use old digitizer / touchscreen .... and you can do hard reset (power + up key + home key)
......try change new touchscreen phone stay on (insert battery)

electrified said:
So after replacing the digitizer I can't boot up the phone. As I've said in title, I'm stuck at the 'Samsung Galaxy Core 2, powered by android' screen.
I tried to re-flash the stock ROM via Odin, everything passes but i always get stuck at the same boot spot.
Power+VolUp+Home doesn't work, only Power+VolDown+Home work.
Does anyone have any suggestion what to do?
Click to expand...
Click to collapse
See the phone model back to the cover.. Maybe you have galaxy core 2 sm-355hn and you have ordered digitizer for sm-355h that it doesn't fit

galaxy j7 2016 SM-J710FN PROBLEM

Hi guys , good evening to all of you.
i have galaxy j7 sm-j710fn , the phone keep rebooting after ( samsung galaxy j7 (6) powered by android ) then few seconds and the phone restart again.
i tried to flash stock firmware by using odin , os 6.0.1 , everything is okay , flash done , but the same problem "" phone keep restarting ""
i when i try to access to stock recovery , a blue screen with a droid , and under the droid thing , it says : installing system update then Eraze ... then installing system update then Eraze , forever
i said , why i didn't install custom recovery , so i installed TWRP
when i try to wipe dalvik and cach and system or data a page of errors show's up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when go to mount it looks like all things are not mounted !!!!!!!!!!! thats why recovery can't spot the storage
help guys , what should i do ?

Maybe eMMC/Pit File problem
I no Nothing about this
So Wait for an expert

qounik said:
Maybe eMMC/Pit File problem
I no Nothing about this
So Wait for an expert
Click to expand...
Click to collapse
yes , i think its PIT FILE
but i did not find firmware with pit file for my phone

HACKIMTOSH said:
yes , i think its PIT FILE
but i did not find firmware with pit file for my phone
Click to expand...
Click to collapse
Search deep in Google
Maybe your luck will favour You
I once found Pit for my GT9192

qounik said:
Search deep in Google
Maybe your luck will favour You
I once found Pit for my GT9192
Click to expand...
Click to collapse
yeah, i'm trying so hard to find the pit file but the problem is samsung mobiles names are so closed to each other , even google goes crazy

help please anyone ? i'm trying but nothing

ODIN LOG
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I managed to something similar to my phone a while back. Only solution that i found was restoring the phone using Samsung Smart Switch app on PC. There are a few stepts the app tells you to do, after that it flashes the stock firmware, modem, recovery...evrything.

sesamo said:
I managed to something similar to my phone a while back. Only solution that i found was restoring the phone using Samsung Smart Switch app on PC. There are a few stepts the app tells you to do, after that it flashes the stock firmware, modem, recovery...evrything.
Click to expand...
Click to collapse
i tried it before ......... smart switch restore the phone and no error during Procedure
when the phone reboot , boom........same problem....keeep restarting
i need PIT file for this phone , anyone ?

Looks like you've flashed the wrong recovery to me.

ashyx said:
Looks like you've flashed the wrong recovery to me.
Click to expand...
Click to collapse
Don't we have only one recovery??? That official one TWRP?

qounik said:
Don't we have only one recovery??? That official one TWRP?
Click to expand...
Click to collapse
Is your device a J7 or ON8?
Please post the full specs of your device from the device itself.

Bravoo do not work......Why break the device?

S6 stuck on Samsung logo screen; Recovery mode = no, Odin mode = yes

I've got a Samsung Galaxy S6 (SM-G920F) which stucks on the Samsung logo screen after booting (Samsung Galaxy S6 powered by Android). I got it from a friend, he doesn't know what happened. Knox wasn't affected so it was just stock.
First I thought it was a dead battery because the phone didn't do anything. Only when the charger was connected, it would show a charging empty battery but no percentage. But after a hour in the charger I could boot into the Samsung logo where it get stuck (still no battery percentage however). I can also boot into download/odin mode. But I can't boot into recovery.
I already tried to flash the latest firmware for the S6 (PHN Netherlands G920FXXU6ERF5 https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/PHN/download/G920FXXU6ERF5/226355/) but that didn't help. It still doesn't boot and I still can't boot into recovery. Should I use some other options in Odin?
I also tried to flash TWRP, but even then I can't boot into recovery.
Flashing both stock firmware and TWRP give no error in Odin.
I found this guide:
https://forum.xda-developers.com/galaxy-s6/help/guide-downgrade-sm-g920f-nougat-to-t3639253
I want to try this, but I already get stuck in step 5.
5. Open SkipSoft Android Tool Kit and wait until you see the main menu. Then go to the installation folder of this tool and you should see an "INPUT" folder. Copy ONLY the boot.img, cache.img, recovery.img and system.img into that folder.
Click to expand...
Click to collapse
When I go to the installation folder (I'm not on the computer right now, something in C:\Program Files\nameofprogram ) there is no INPUT folder.
And in step 6, on my screen there is no option for 99. I got something like this: (picture is from google, not exactly what I got. But almost the same)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I don't know what these steps do. Can't I just make the flashable file with winrar or 7zip or something?
Are there other options I can try? What can cause this behavior? Is it a faulty bootloader? If so, can't I just reflash just the bootloader?
Maybe I should try to flash 5.0.2 or 5.1.1, but I can't find these files on sammobile and updato.com. I found the original url to sammobile but those aren't working anymore:
5.0.2: G920FXXU1AOE3 G920FPHN1AODQ PHN
http://www.sammobile.com/firmwares/download/47427/G920FXXU1AOE3_G920FPHN1AODQ_PHN/
5.1.1: G920FXXU2BOGB G920FPHN2BOG8 PHN
http://www.sammobile.com/firmwares/download/52406/G920FXXU2BOGB_G920FPHN2BOG8_PHN/

Or can someone help me to get the 5.0.2 and/or 5.1.1 files for the G920F?

Typing 99 in the menu worked for me. Even though I also didn't see the corresponding option. It seems to be an update command, downloading the latest packages of adb, adb-fastboot and magisk.
Can you verify that you tried starting recovery mode IMMEDIATELY after flashing the TWRP? The original system seemed to override any changes, if you give it the chance to reboot normally.

Yes I tried TWRP with auto-reboot in Odin and immediately press VOL_UP+POWER+HOME after auto reboot. And TWRP with auto-reboot unchecked. So flash TWRP, force reboot with VOL_DOWN+POWER+HOME switch to VOL_UP+POWER+HOME before the Samsung logo appears. Bot both methods won't let me boot into recovery.

When I try to flash this rom:
G920FXXU3DPBG_G920FPHN3DPB2_PHN
I get this error in Odin (tried v3.10.6 and v3.12.4_4)
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU3DPBG_G920FPHN3DPB2_G920FXXU3DPB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why?
Phone says:
Code:
[CM] SW REV. CHECK FAIL. DEVICE: 6, BINARY: 3

Hi,
Were you able to figure out what the issue was? I'm in the exact same situation and have tried similar things with no success. I've kind of given up on it being a software issue at this point..

Nope, I'm going to sell it for parts.

Markos said:
Nope, I'm going to sell it for parts.
Click to expand...
Click to collapse
This happened to me after trying to get unstuck from a bootloop. I think I solved it by flashing it again a couple more times. And I remember it taking quit a while to actually boot up when it finally did.

I already flashed it a lot of times. Both original firmware as TWRP. Nothing helped.
I wanted to try early stock rom but can't find downloads

Markos said:
Or can someone help me to get the 5.0.2 and/or 5.1.1 files for the G920F?
Click to expand...
Click to collapse
I just want to suggest the SamMobile. Hahaha.

heidisteen said:
I just want to suggest the SamMobile. Hahaha.
Click to expand...
Click to collapse
As I said, they don't have it anymore

Markos said:
As I said, they don't have it anymore
https://youtu.be/zXSHe3oorIM
Click to expand...
Click to collapse
I found a video about fixing Samsung Galaxy Android system issues, sound helpful with you.