Ok... am I imagining things, or do some of the lines/text on a dark background show a fuzzy haze around them? I'm looking at my watch face, and some areas the text is razor sharp, where other areas there is fuzziness around it.
It shows up with the watch face and with text... but not evenly.
When I take a screen shot, it isn't there on my phone.
Related
Anyone else have any issues in regards to the screen?
I can look past the horrible refresh rate/ghosting, but this is really bugging me, amongst other things.
It seems the bottom half, mainly in the left corner, is quite a bit brighter than the top, making it seem more yellow, and the top a darkish pink hue.
The bottom corners also have very noticeable light bleed strip down the sides, which is noticeable on any screen/colour. It's like a small bright 3mm or so wide strip each side.
Half way up theres also a mark that separates where the brighter part of the screen starts/ends, so I'm wondering if someone dented the back of the panel when assembling it in the factory?
Either way I've requested a replacement, I'm just more curious to see if it's a common problem or not. Ghosting aside, the screen itself is quite stunning to look at, especially with a bit of ambient light in the room.
istrikerx said:
Anyone else have any issues in regards to the screen?
I can look past the horrible refresh rate/ghosting, but this is really bugging me, amongst other things.
It seems the bottom half, mainly in the left corner, is quite a bit brighter than the top, making it seem more yellow, and the top a darkish pink hue.
The bottom corners also have very noticeable light bleed strip down the sides, which is noticeable on any screen/colour. It's like a small bright 3mm or so wide strip each side.
Half way up theres also a mark that separates where the brighter part of the screen starts/ends, so I'm wondering if someone dented the back of the panel when assembling it in the factory?
Either way I've requested a replacement, I'm just more curious to see if it's a common problem or not. Ghosting aside, the screen itself is quite stunning to look at, especially with a bit of ambient light in the room.
Click to expand...
Click to collapse
i didn't get your question, but if it is that i have any issues in regards to the screen? then no, i think it's stunning...
I also have the light bleed in the corners but it's only really noticeable on the bottom of the right bezel (in portrait). The light bleed looks like a strip on bright white light running up the right hand bezel before stopping about a third of the way up.
This is my second z3 and I'm contemplating whether to bother with another replacement or just return it altogether. Can't say I've been won over by the phone so far...I may just go for the note 4 instead...
On my lgls996 any light color has a random thatch work of tiny pink squares noticeable. Most easily seen on white, but also clearly noticeable on the green banner of hangouts. Is this an issue with the screen? Or is it an lg skin? It's more than fairly annoying. Screen shot for your... Enjoyment?
[Edit] opening on my 42" TV, extremely hard to see the pink squares on white, but still pretty evident as small squares on the top banner, also extremely annoying and visible in dudes finger
Swap the phone if you can for a new one i don't have that issue. My previous flex 2 screen had issues i took it back for a replacement.
Hi everyone.
Just got my new S6 (non edge) today. While I'm installing my apps by sitting in the garden, the sun shines directly to the display and I saw just two things I can not recognize.
Around the display is a frame inside, which is showing up, when there is a white background in a lighten environment where the auto brightness is setting up to a maximum . Its hard to photograph, but I tried it. The "zebra-look/stripes" are from taking the photo, its not present on the display.
After that I saw a spot on the upper side in the middle of the display, too.
Anyone else? Or is this no problem? Doesn't looks nice when the sun is shining and you are using the phone...
PerryRhodan said:
Hi everyone.
Just got my new S6 (non edge) today. While I'm installing my apps by sitting in the garden, the sun shines directly to the display and I saw just two things I can not recognize.
Around the display is a frame inside, which is showing up, when there is a white background in a lighten environment where the auto brightness is setting up to a maximum . Its hard to photograph, but I tried it. The "zebra-look/stripes" are from taking the photo, its not present on the display.
After that I saw a spot on the upper side in the middle of the display, too.
Anyone else? Or is this no problem? Doesn't looks nice when the sun is shining and you are using the phone...
Click to expand...
Click to collapse
My phone has the same thing when in direct sunlight showing a white image I can see what looks kind of like a faint black border on the edge like in your bottom left corner picture.
I literally just saw this when I was outside today, fortunately I was not able to see it inside or under normal lighting conditions. It's most likely a shadow of sorts from light reflecting inside the display assembly. I don't think it's a big deal tbh.
Yeah quite possibly a shadow of the assembly. My fingers make shadows on the screen in direct sunlight unlike any phone I've seen before.
If you look hard enough, it looks like a G.
Its rhe panel in behind the screen guys
Does anybody else have a rather noticable grainy screen? It looks like a layer between the diodes and the front glass. Its as if I was looking on the screen with some photoshop grainy effect. Or better, if you put a very thin paper in between the diodes and the front glass. It gets significanty better with brightness turned up to max. But it doesnt go away completely. Its most pronounced with darker colours. Black is fine though, no mura effect there.
Its really annoying to look at. Is it normal? I thought LG supposedly fixed this issue which was very common on the original Flex.
I only saw a grainy screen when I turned the brightness way way down below the normal with Lux brightness control.
I got my Mi4C a few days ago and like it very much so far, but noticed some backlight bleeding.
It´s only visible on grey background (AdAway or Fire TV app) so i don´t know if my device is broken or not.
Adding a picture for example below but i have to say that in reality its less visible than on the picture.
Please look at the right and left edges.
How about your Mi4C?
Basically just want to know if its faulty and i should get a new one or maybe "Bad construction design" by xiaomi? Now i notice it almost everywhere btw
What exactly is the issue? You mean that the screen is bright at the edges? I think mine is a bit too but it's hard to notice. Can you provide more photos?
My backlight is visable at extreme angels so i think it is just the Sharp display used. It is not the highest quality of components.
I have some light bleed on the top, only visible with a status bar color other than black or white, so kind of a non issue for me
@Ydraulikos
Yes, thats exactly what i mean. The edges of the screen are brighter. Especially the edge marked yellow on the picture.
The other ones are only visible if you look hard for it.
More examples below