Anyone else have any issues in regards to the screen?
I can look past the horrible refresh rate/ghosting, but this is really bugging me, amongst other things.
It seems the bottom half, mainly in the left corner, is quite a bit brighter than the top, making it seem more yellow, and the top a darkish pink hue.
The bottom corners also have very noticeable light bleed strip down the sides, which is noticeable on any screen/colour. It's like a small bright 3mm or so wide strip each side.
Half way up theres also a mark that separates where the brighter part of the screen starts/ends, so I'm wondering if someone dented the back of the panel when assembling it in the factory?
Either way I've requested a replacement, I'm just more curious to see if it's a common problem or not. Ghosting aside, the screen itself is quite stunning to look at, especially with a bit of ambient light in the room.
istrikerx said:
Anyone else have any issues in regards to the screen?
I can look past the horrible refresh rate/ghosting, but this is really bugging me, amongst other things.
It seems the bottom half, mainly in the left corner, is quite a bit brighter than the top, making it seem more yellow, and the top a darkish pink hue.
The bottom corners also have very noticeable light bleed strip down the sides, which is noticeable on any screen/colour. It's like a small bright 3mm or so wide strip each side.
Half way up theres also a mark that separates where the brighter part of the screen starts/ends, so I'm wondering if someone dented the back of the panel when assembling it in the factory?
Either way I've requested a replacement, I'm just more curious to see if it's a common problem or not. Ghosting aside, the screen itself is quite stunning to look at, especially with a bit of ambient light in the room.
Click to expand...
Click to collapse
i didn't get your question, but if it is that i have any issues in regards to the screen? then no, i think it's stunning...
I also have the light bleed in the corners but it's only really noticeable on the bottom of the right bezel (in portrait). The light bleed looks like a strip on bright white light running up the right hand bezel before stopping about a third of the way up.
This is my second z3 and I'm contemplating whether to bother with another replacement or just return it altogether. Can't say I've been won over by the phone so far...I may just go for the note 4 instead...
Related
Hi,
Just for fun I've put mu phone under UV light. I have some slightly yellow backlight bleeding and thought it might solve the yellow tint of backlight bleeding.
I don't have the yellow band, just some yellowish backlight bleeding.
And then I at once saw this:
http://i.imgur.com/CqycUe0.jpg
Can anyone explain what's the rectangular part of the screen that is lighter than the rest of the screen? Or is it the glue that's everyone is talking about?
EDIT: my theory actually worked and no more yellowish backlight bleeding. It's still there (and only visible from a certain angle), but it's not yellow anymore. It's now white
I'm using franco kernel btw, so the screen tint is whiter than with standard kernel. This is when I noticed the yellowish backlight.
Is that the screen on with a black background? It looks so centered and rounded that I have a hard time believing it's not some sort of picture.
(I am not calling you a liar, just saying that it looks strange)
I could assume that your glue has been cured by UV but it has not spread across the whole screen yet. Maybe try putting it under the light again and check if that makes a difference?
The screen was off. Even worse: the phone was off....
That's exactly why I was surprised to see that. And why I asked here.
There is also nothing visible on the screen. The brightness is equal and no discolorations are visible. So I'm not worried about it. Was just curious.
I saw it the minute I've put it under UV light. Didn't change anything after 15 mins (except my yellowish backlight LED's became white) and in general the screen looked whiter)
On another forum I've read it could be some kind of oil to protect the LCD from the digitizer. Not sure it is but could actually be...
Could be glue but the shape is too strange for that.
Another guess is that they like sticked some kind of sticker on the glass (coming from manufaturer) and they remove the sticker without cleaning and then it leaves this kind of residu...
It's only visible under UV light, that's the interesting part.
Hey guys! what should I look out for after I finally get my S6 before the return window closes? Mainly on the hardware side as there is always the chance that the software gets fixed.
Alright guys! Lets start trouble shooting. i just got my S6 in topaz blue(MAYBE THIS IS IMPORTANT HERE as in: -> it's a lighter colour). and immediately i noticed a few bad bad things.
The softkeys do not light pure white but more of a beige hue(dirty white).Additionaly!! The silhouette of the lit light is shifted two times within the glass. What I mean is, that the conture of the lit softkey button can also be seen right above and below the normal place where the softkey lights up... so if it is lit I can see the symbol a total of three times. Depending on the angle of view on of the reflections(?) within the glass disappear. The notification LED has also the same kind of light shifting effect
The whole Metal-Bezel on the front feels quite sharp in comparision to the back side of it.
The Display has a slight green hue at the bottom of the display(almost the same color of the phone)
I am able to see iregularitys in the colour layer of the bezel beneath the glass on the top part of the phone. this can only be seen if a lightsource shines on it.
And lastly: OMG is the phone slippery! I think this comes from the fact the the only part which gives the phone hold on the side opposite the palm is the small edge side(opposed to the end of the bezel + a rounded back cover of some phones(Lg G2... so good to hold)).
Hello! My screen looks like this: http://imgur.com/a/9P3Xn. On the first photo it is a little bit hard to see but there's blue tint on right top and right bottom of the screen. Overall right side of the screen is whiter than left side. Grain is visible on the photos. In real life it isn't too grainy on the first look but when u use the phone it is really anoying, atleast for me. Should i go with warranty? Is it possible to get better screen?
Avantu said:
Hello! My screen looks like this: http://imgur.com/a/9P3Xn. On the first photo it is a little bit hard to see but there's blue tint on right top and right bottom of the screen. Overall right side of the screen is whiter than left side. Grain is visible on the photos. In real life it isn't too grainy on the first look but when u use the phone it is really anoying, atleast for me. Should i go with warranty? Is it possible to get better screen?
Click to expand...
Click to collapse
it's normal your screen look like that, is OLED, and almost OLED and AMOLED look like that after some time...if you put your brightness up to 100% you dont notice that too much, only if the brightness is low you notice that...dont worry! I brought my G flex2 4 days ago and my screen have a blue spot like yours but on the right corner in the middle of screen and i am not worried about that!
All AMOLED and OLED screen's someday will have this "problem"...
I got my Mi4C a few days ago and like it very much so far, but noticed some backlight bleeding.
It´s only visible on grey background (AdAway or Fire TV app) so i don´t know if my device is broken or not.
Adding a picture for example below but i have to say that in reality its less visible than on the picture.
Please look at the right and left edges.
How about your Mi4C?
Basically just want to know if its faulty and i should get a new one or maybe "Bad construction design" by xiaomi? Now i notice it almost everywhere btw
What exactly is the issue? You mean that the screen is bright at the edges? I think mine is a bit too but it's hard to notice. Can you provide more photos?
My backlight is visable at extreme angels so i think it is just the Sharp display used. It is not the highest quality of components.
I have some light bleed on the top, only visible with a status bar color other than black or white, so kind of a non issue for me
@Ydraulikos
Yes, thats exactly what i mean. The edges of the screen are brighter. Especially the edge marked yellow on the picture.
The other ones are only visible if you look hard for it.
More examples below
I never even noticed this before but I read a thread about it and than I looked at my phone and there is a barely visible light bleed above the light sensor like if it's just light barely peeking thru the glass it's not on the display. It's where the top bezel above the front camera meets the frame. Is this something I should b concerned about. It's only noticeable in the dark. Is it it defected or is it normal.
darksoul78644 said:
I never even noticed this before but I read a thread about it and than I looked at my phone and there is a barely visible light bleed above the light sensor like if it's just light barely peeking thru the glass it's not on the display. It's where the top bezel above the front camera meets the frame. Is this something I should b concerned about. It's only noticeable in the dark. Is it it defected or is it normal.
Click to expand...
Click to collapse
I have it too with my s8+, there is a little dot on the left side of the device where the plastic connects with the screen.
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Rob F1UK said:
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Click to expand...
Click to collapse
But will this affect water resistance or is this jus light peeking thru glass
darksoul78644 said:
But will this affect water resistance or is this jus light peeking thru glass
Click to expand...
Click to collapse
That is a very good question
darksoul78644 said:
But will this affect water resistance or is this jus light peeking thru glass
Click to expand...
Click to collapse
Depends on if its just light from mossing paint or an air gap.
The front glass is glass so its see through, and then there is a black flim/coating put on it. Then it is glue to the frame of the phone.
So if a piece of the black coating got messed up then your get light showing.
Now if its not glue down all the way and there is a gap then the water proof is gone.
There was a guy on xda that got his coarl blue s7e and one corner was missing some of the blue coating.
I have this light bleed over the iris scanner and the front camera. Then I searched where it comes from. I saw if I had a white screen (for example settings) and a high brightness a big light bleed in the front camera if you look from the top of the phone to the bottom of the camera. There I see light from the screen. It's not a problem for me, but have you guys this too? The question about water resistant is interesting in this case.
hope it's jus paint that is missing. That's fine with me. If it's not glued down right I'm gonna have to go exchange it. I'm gonna have to check it out more and see what it is.
I'm seeing something similar with my unit...but I think this is more of a light reflection off the interior of the case because of the space/void created by the two sensors in that area. I say that because the reflection occurs directly about the sensors and it moves around a bit as you change viewing angle. Am I crazy?
It is a reflection that gets passed on to the IR LED. Not a sensor.
Harmless, and seems to be on all units I looked at.
Rob F1UK said:
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Click to expand...
Click to collapse
How bad is your bleed? I JUST noticed today that mine has bleeding on the right edge? But it seems to go all the way down the side? Mostly visible when there is something bright on the screen? There is also a little on the bottom left side of the screen..
So, can we say that the light bleed above the front camera is normal then? I have it too.