Database Info

[UNOFFICIAL]Slimlp 5.0.2 Alpha build 0.91[01/17/2015][Bumped]

I'm just going to keep the OP simple for now. For those that don't know me, I am an Official Slim maintainer for lg g2 and geeb (Optimus G).
This is Slimlp 5.0
Installation Instructions
1. Install BUMPED TWRP for the d850: [Here]
2. Download the ROM (see download link below) and copy it to your SDCard
3. Reboot into Recovery
4. Perform a NAND backup
5. Wipe data/factory reset
6. Flash the ROM
7. Flash Gapps
8. Reboot
Known Issues
-Any issues present on CM12
-You tell me
Download
ROM: [Here]
Recommended GApps:[Here]
Thanks
invisiblek - I forked his repos
thecubed - For BUMP.
darkspadez-For helping me get it to boot.
If I forgot you, let me know
Source
Kernel Source: https://github.com/arcardinal/kernel_lge_g3
g3-common: https://github.com/arcardinal/device_lge_g3-common
d850: https://github.com/arcardinal/device_lge_d850
blobs: https://github.com/arcardinal/proprietary_vendor_lge
Rom Source: https://github.com/SlimRoms

I'm no longer using dev-host

Thanks a lot. I'll try to install tomorrow and report back.

I'll have a new build up soon that fixes dt2w not working

Word ! Here we go ..Roms bustin out !
2SHAYNEZ

New build is already up. dt2w is working now
For those that downloaded the first build. If you don't want to download and flash the whole rom, you can download this file.
http://d-h.st/JM3
Copy to system/etc/init.d
Reboot

Thank you for bringing this to us! Appreciate the work. Always loved SLIM

So glad to see this here. A super light rom for this beast of a phone.

Thank you

Thank you for this, running very smooth snappy.

Just what I was waiting for. I've used your builds on all three of my g's now

Acardinal, so glad to see you show up here. Once Bluetooth gets sorted out, I'll be flashing post haste.
Thank you for all you do.

Anybody got a mirror?

Trying to download but only get a 24kb file. I know Slimkat is small but not quite that small.

Is there double tap to wake in this rom?

mcnick0495 said:
Is there double tap to wake in this rom?
Click to expand...
Click to collapse
There are only 2 pages of comments here so far. You could have found the answer really by looking at the comments on the front page.
To answer your question, yes. Dt2w was fixed when it was updated.
Press be sure to read and search. Especially when a thread is so short.
sent from the Bacon Pope's LG G3

Sorry, didn't know what dt2w stood for.

I have access to a faster server. I have to run into work for a little bit this morning. I'll upload it when i get home, so it doesn't take as long to download.

arcardinal said:
New build is already up. dt2w is working now
For those that downloaded the first build. If you don't want to download and flash the whole rom, you can download this file.
http://d-h.st/JM3
Copy to system/etc/init.d
Reboot
Click to expand...
Click to collapse
404 not found

SuperMidgetProductions said:
404 not found
Click to expand...
Click to collapse
There appear to be issues with dev-host this morning.

[ROM] [DEV ABOOT] [UNOFFICIAL] VanirAOSP m6 [KLTEVZW] [Weekly-ish]

-- Begin copy-pasta template from one of my other unofficial build threads... please let me know if I miss updating something --
Note: I don't run this ROM personally, I really just built it. It shouldn't, but it may eat your cat.
Code:
*** Disclamer
-- You install these at your own risk! You are responsible for anything that happens from flashing these files to YOUR phone! If your
phone melts into a pile of goo, catches on fire etc. IT IS NOT MY RESPONSIBILTY BUT YOURS!
FAQ:
Q: Can I use this?
A: Do you have a developer aboot? If so then yes, but I won't help you install a developer aboot. I only ever had a Developer phone, so I only know the process as well as reading the thread. See this thread for info/help: HERE
Q: When/how often are these built?
A: Less often than my CM13.0 build, but at least every week. Unlike my CM13.0 build, I don't use this ROM so I won't be doing a "does it boot" check before uploading. Please tell the entire thread if one day's build doesn't work properly.
Q: Why did you do this ROM next instead of ______?
A: #1, it was easy. Vanir doesn't require me to make a new branch to change file names and text lines in the makefiles from "cm" to XXXX. #2, Vanir holds a special place to me for having device trees that worked for our S5 at least through Lollipop -- they allowed me to make my own CM builds. #3, I used it back in the day and they seemed pretty tight.
Q: Can I get help with something?
A: I have a full-time job and travel a lot. I'll try to jump in and answer some questions, but there is a lot of info out there for you to learn on your own. Aside from you having a vzw-variant, most of the details are standard KLTE.
Click to expand...
Click to collapse
Recovery:
The standard KLTE TWRP 3.1.0-0 should mostly work, but MTP doesn't work for any klte* variant using it.
I prefer KToonsez's 2.8.6-based Recovery. It's older, but MTP works.
There are Unofficial 3.*.0-* recoveries available by @jcadduono. I find that these don't support decryption properly, which I find to be mandatory.
Like many other devices, the .zip files can be flashed in a recovery. The .tar.md5 files can be flashed in ODIN. The .img files can be flashed using Flashify, a TWRP recovery. You can even get an .img file from a .zip or .tar.md5 if you just open it up.
If you use adopted storage then things get odd. The latest recovery by @jcadduono MAY support adopted storage if you don't encrypt userdata (I personally know that TWRP handles adopted storage for jflte and d2), but I do use encryption so I don't use that recovery. It may be that you only see /data/media/0 -- if so, I find that using Flashify for each nightly is the most straightforward way to update, but you could always manually copy to /data/media/0 before rebooting to recovery. This is a standard Marshmallow and TWRP thing.
Click to expand...
Click to collapse
Modem/Firmware:
Most of the LP modem/firmwares should work, but I use the one PB1 here. This modem matches with the proprietary vendor files that are part of the build. Flash it in ODIN. Please note that some have reported that you cannot flash these after the aboot unlock; If you cannot flash the PB1 modem/non-hlos it shouldn't cause any big problems.
https://www.androidfilehost.com/?fid=24459283995308895
Click to expand...
Click to collapse
GApps:
Various Vanir threads recommend SlimGapps, OpenGapps, or a Gapps packaged by DHO (the Vanir main developer). If you use OpenGapps, make sure to use an 6.0 version for ARM architecture. Like with all Gapps selections, they're all pretty much the same with the differences being which apps are packaged and what versions are packaged.
OpenGapps
SlimGapps
DHO's Gapps. These are a little bit older.
Click to expand...
Click to collapse
Downloads (the thing you were looking for):
I'll build at least once per week, at least until the RR team picks up the torch. Once the build is complete, I upload it to my AFH account.
VanirAOSP m6 KLTEVZW weekly-ish
Click to expand...
Click to collapse
Does/Doesn't Work:
Everyone that gives it a shot needs to let the thread know.
Click to expand...
Click to collapse
Thanks:
Everyone on the Vanir and CM teams. This is 99% of their stuff with just a couple tweaks to make it build, (hopefully) boot, and run for KLTEVZW. See Post 2 for those changes.
Click to expand...
Click to collapse
Android Version: 6.0.1_r22 (prior to 20160406 build)
Android Version: 6.0.1_r24 (20160406-present build)
I forgot something. I know I did. I'll try to update this post sometime.

More things...
Source
In order of importance:
VanirAOSP github: https://github.com/VanirAOSP
Cyanogenmod github: https://github.com/cyanogenmod
My github: https://github.com/haggertk
Click to expand...
Click to collapse

Man, you're awesome. Glad to have someone like you to port all these rims. ***roms oh my god

Thanks for turning me in a flashing junkie again... Lol, great work... Now just miss PacMan rom, Dirty Unicorns and AOKP...

Running smooth with Vanir..
Thanks haggertk!!

Thanks again! I love how smooth and stable it is. Not too much mod bullcrap, and I get my WiFi on notifications.
Sent from my SM-G900V using XDA-Developers mobile app

Runs smooth, what happenned to this thread?

Is this ROM still supported? Anyone know what's going on with it?

MortimerR said:
Is this ROM still supported? Anyone know what's going on with it?
Click to expand...
Click to collapse
Check here..
http://forum.xda-developers.com/showthread.php?t=3355159
Sent from my SM-G900V using Tapatalk

Moved page.

We just moved to a new thread. Click the link below for updates.
https://forum.xda-developers.com/oppo-f1/development/dev-lineageos-oppo-f1-f1f-t3667742
<Mod Edit>
Thread closed.

Don't make fun of development
Where are the links

khannz7 said:
Don't make fun of development
Where are the links
Click to expand...
Click to collapse
Thanks for the feedback. It's fixed now.

Earthy said:
Thanks for the feedback. It's fixed now.
Click to expand...
Click to collapse
What did you fix in the build
I mean will it boot with the old cm13 kernel

khannz7 said:
What did you fix in the build
I mean will it boot with the old cm13 kernel
Click to expand...
Click to collapse
See page 34 and so on.
https://forum.xda-developers.com/oppo-f1/development/dev-cyanogenmod-14-1-oppo-f1-f1f-t3519981/page34

Earthy said:
See page 34 and so on.
https://forum.xda-developers.com/oppo-f1/development/dev-cyanogenmod-14-1-oppo-f1-f1f-t3519981/page34
Click to expand...
Click to collapse
Yeah...As you had said that it is just a HAL problem...
Camera Backlight and Flashlight Toggle......
Have they improved a bit .....
And does this build boot.....
Just saying this because we had tried flashing patches before...but it was a no?

khannz7 said:
Yeah...As you had said that it is just a HAL problem...
Camera Backlight and Flashlight Toggle......
Have they improved a bit .....
And does this build boot.....
Just saying this because we had tried flashing patches before...but it was a no?
Click to expand...
Click to collapse
Yes, it booted.
Both the camera bug and torch bug improved a bit. In torch bug, I can already turned on the flash, but not in quick settings toggle. In the camera bug, taking photos already work but not in the google camera app.

Earthy said:
Yes, it booted.
Both the camera bug and torch bug improved a bit. In torch bug, I can already turned on the flash, but not in quick settings toggle. In the camera bug, taking photos already work but not in the google camera app.
Click to expand...
Click to collapse
Ohhkk

khannz7 said:
Ohhkk
Click to expand...
Click to collapse
But right now, I'm working to embed 'torch on' on the quick settings.

thanks

Doesn't the stock gapps package replace the camera app with google camera and that isn't compatible and doesnt open. One question where is the beta version this is confusing with 3 threads.
Maybe change the title of this thread to something like. Earthys lineage and post patches, zips and fixes for everyone to help and integrate into all roms. But it would be better if you post it in the main dev thread.
Ps I would give @MiniBlu more credits he's been amazing and has been there since the beginning. He's the "main" guy. He hasn't just done a kernel patch. He's provided us with so much more

Jamie_oppo said:
Doesn't the stock gapps package replace the camera app with google camera and that isn't compatible and doesnt open. One question where is the beta version this is confusing with 3 threads.
Ps I would give @MiniBlu more credits he's been amazing and has been there since the beginning. He's the "main" guy. He hasn't just done a kernel patch. He's provided us with so much more
Click to expand...
Click to collapse
That's true, no real need for this new thread. Could have just posted a camera/torch patch zip. The rest is just another reposting of my work (it uses my kernel with my audio patch in it , my rotation and navbar patch) apart from slight camera/torch improvement there is nothing new here.

Earthy said:
Lineage for Oppo F1 (f1f)
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is the successor to the highly popular custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
Instructions
For Installing
1. Download the latest TWRP, build, and GApps.
2. Install/unlock TWRP.
3. Reboot to TWRP recovery.
4. Wipe System, Data, Cache, and Dalvik.
5. Flash the build, and GApps respectively.
6. Flash patches if available.
7. Wipe cache and dalvik.
8. Reboot to system, and enjoy.
For Updating
1. Download the latest build.
2. Reboot to TWRP recovery.
3. Flash the build.
4. Flash patches if available.
5. Wipe cache and dalvik.
6. Reboot to system, and enjoy.
Downloads
TWRP: https://mega.nz/#!1PxxiDAY!lkmVuIG7MfjJGvsWy13ChmjY3Q0uEur9iLMfolGZtXI
Build:
https://mega.nz/#!Jx53BQaR!pfuaxtVsfanWb8JBkbTRctQGMFNw7cKOjNOwrRWf_94
OpenGApps:
http://opengapps.org
Patch (Auto Rotation and Navigation Bar): https://forum.xda-developers.com/attachment.php?attachmentid=4085556&d=1490267508
Patch (Kernel): https://www.androidfilehost.com/?fid=673368273298938074
Version Information
Latest Stable Version
Build: 14.1-20170311-UNOFFICIAL-f1f
Android Version: Android 7.1.1 Nougat
Latest Beta Version
Build: 14.1-201706XX-UNOFFICIAL-f1f
Android Version: Android 7.1.x Nougat
OpenGApps Version
Platform: ARM64
Android: 7.1
Variant: Stock (recommended)
All based on LineageOS source, Android AOSP, and others.
Known Bugs
The bugs listed here are bugs from the latest stable build.
1. Camera crashes. (50% fixed in beta)
2. Torch toggle don't work. (50% fixed in beta)
3. Battery non-accuracy. (75% fixed in beta)
For bug report, just reply to this thread.
Credits
@uberlaggydarwin - Device Unlocking
@MiniBlu - Kernel Patch
@kdd998 - Build
@Jamie_oppo - Developer
@Earthy - Developer
@khannz7 - Developer
and community.
Keep up-to-date here, this first thread post change info over from time to time.
Click to expand...
Click to collapse
Bro listen I am not any developer
It will be good if you give proper credits to proper persons

khannz7 said:
Bro listen I am not any developer
It will be good if you give proper credits to proper persons
Click to expand...
Click to collapse
There are credits.

Earthy said:
There are credits.
Click to expand...
Click to collapse
Where's the beta version? Or is it coming

Earthy said:
There are credits.
Click to expand...
Click to collapse
As you have been said that there was no need to make this new thread.....it is just a repost ...also there is an existing LOS14.1 thread .....if you had fixed the camera and Flashlight...
You just had to upload that patch and I would have added it to the existing thread and given you the proper credits.....
There was no need to create this thread

@Jamie_oppo @MiniBlu @khannz7
Would you like me to create a website?

Jamie_oppo said:
Where's the beta version? Or is it coming
Click to expand...
Click to collapse
Have you tried the build

khannz7 said:
Have you tried the build
Click to expand...
Click to collapse
No I'm on rr testing the battery. But the build is just a modified version of 0311 one isn't it?

Jamie_oppo said:
No I'm on rr testing the battery. But the build is just a modified version of 0311 one isn't it?
Click to expand...
Click to collapse
Yeah I think..so
What about ?....??

Lineage OS with SultanXDA tweaks and OMS

Hi World,
I've been building a ROM nightly, pulling from LineageOS, LineageOMS, and SultanXDA.
It's been fine for me, so I thought I'd share it for others to use too.
This is my first go at posting this kind of thing, so please go easy on me.
Sources:
https://github.com/LineageOS
https://github.com/LineageOMS
https://github.com/sultanxda
Credits
LineageOS team
Substratum team
@Sultanxda
Before Flashing...
You MUST be on the correct Firmware for this image to flash. Download them here:
OnePlus 3T
OnePlus 3
Downloads:
XDA
Android File Host
Flash the firmware image in TWRP. From there in, it's the usual instructions. Flash in TWRP, optionally use GAPPS and Magisk/SuperSU/Lineage-Addon.
Usual risks apply.
If there is any other information I should be including here, please let me know.
XDA:DevDB Information
Lineage OS with SultanXDA tweaks and OMS, ROM for the OnePlus 3
Contributors
prmcmanus
ROM OS Version: 7.x Nougat
ROM Firmware Required: OB8
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-06-18
Last Updated 2017-06-18

Changelog
In the attachments.
This is the how I'm capturing Change Logs until I set up my own repo. Advice is welcomed if there are better methods.
Code:
repo forall -pc ' git log --since=$(cat /home/mcmanus/android/changelog/lastbuild_OP3.txt) --date-order ' > /home/mcmanus/android/changelog/OP3-changelog-$(date +%Y-%m-%d).txt
date +%d.%m.%Y > /home/mcmanus/android/changelog/lastbuild_OP3.txt

Reserved

Good start bro!! ?

@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]

mukesh22584 said:
@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]
Click to expand...
Click to collapse
Thanks I didn't realise there was already a similar ROM, which is why I built this one.
It looks like the other is adding other features, whereas I'm sticking to the sources for now, so that's be the difference between the two.
I'll get the change log in the reserved post

Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future

Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it

prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
He did mention that he is gonna keep his repos up for anybody who wants to continue updating and building his version.
Sent from my ONEPLUS A3000 using Tapatalk

prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
Looking forward to it! One thing would be nice though, even if we forget about the features - OTA update

Started using your builds as Matssa is about stop supporting his builds. Got no issues, runs stable and smooth. Looking forward to future updates. Update notes would definitely help this rom grow, ota as well

Switching to this ROM as well as matssa will do only one, final build. @prmcmanus please consider my previous request

Would be really cool if this Dev picks up right where Matsaa leaves off.

Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Stupifier said:
Would be really cool if this Dev picks up right where Matsaa leaves off.
Click to expand...
Click to collapse
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.

prmcmanus said:
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.
Click to expand...
Click to collapse
That's good news! Matssa managed to get lock screen blur working like on official Lineage. Sultan's builds and your current builds don't have this feature so I'm looking forward to see you pick his ROM up.
Sent from my ONEPLUS A3000 using Tapatalk

Yes! Finally just a LineageOS ROM with sultan kernel and OMS without all the extra stuff
THANK YOU!
OTA updates would be one nice thing to add... For the rest it's perfect as is

@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]

mukesh22584 said:
@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]
Click to expand...
Click to collapse
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested

prmcmanus said:
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested
Click to expand...
Click to collapse
I've flashed your latest build and everything seems fine... Just unable to install V4A...
Will report you after a battery cycle....

@prmcmanus idle drain is so solid let's check active drain..and also installed V4A after many attempt...
Thanks for build...

[ROM] [10.0] [UNOFFICIAL] LineageOS 17.1 for Note 9 (Snapdragon)

LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working:
IMS (no volte)
Need more testing (encrypted /data is not supported)
It has been reported that sometimes the touch screen is responsive while in calls
Instructions:
Make sure official TWRP 3.4.0 has been installed and functional.
Download the latest build (and optionally gapps).
Reboot to recovery
Wipe system, data, and cache (required if you switch from other ROMs)
Flash the latest build, gapps, and magisk.
Reboot
Downloads:
Galaxy Note 9 Snapdragon (N9600): https://github.com/klabit87/OTA/rel...age-17.1-20201113-UNOFFICIAL-crownqltechn.zip
Google Apps: https://opengapps.org/
Reporting Bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred.
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. For now please report any bug below.
Group:
Join this group for contacting me and bug reporting (typically fast response )
Samsung SDM845
https://t.me/samsungsdm845
Also dont forget to hit the thanks button!
Contributors
Thanks to @Vaughnn for the initial work on the oreo trees.
Thanks to @iNeoxx for continuously testing for international carrier support.
Thanks to @jrkruse , @Krog18 , @TheMadScientist , @biikman, and @stang5litre for testing for US carrier support.
ROM Firmware Required: Minimum of Android 10 firmware
Based On: LineageOS
Version Information
Status: Beta
Source:
https://github.com/klabit87/android_device_samsung_crownqltechn
https://github.com/klabit87/android_device_samsung_sdm845-common
https://github.com/klabit87/android_kernel_samsung_sdm845
https://github.com/klabit87/proprietary_vendor_samsung_sdm845-common
Created 2020-05-03
Last Updated 2020-09-14

Switched to sourceforge as the filehost since afh gave issues instantly.

Also just pushed an update as I thought I'd fixed something but it wasn't. Should be much better now.
Sent from my Pixel 2 XL using Tapatalk

Fixed tg link.
Sent from my Pixel 2 XL using Tapatalk

twrp unable to decrypt fbe device
e1001:failed to update system image
update process endes with Error:7
device:N9600CHC,firmwaren9600zcu4dtb6

xjqlfq said:
twrp unable to decrypt fbe device
e1001:failed to update system image
update process endes with Error:7
device:N9600CHC,firmwaren9600zcu4dtb6
Click to expand...
Click to collapse
Share the recovery log please.
Sent from my Pixel 2 XL using Tapatalk

Thanks for your excellent work!:good:

Nice always good to see a form of "stock" android i was looking into flashing a generic system image GSI not long before you posted this do you think you will get IMS working?

ms_office_95 said:
Nice always good to see a form of "stock" android i was looking into flashing a generic system image GSI not long before you posted this do you think you will get IMS working?
Click to expand...
Click to collapse
I certainly plan to give it my best. Ims is quite a must for me on my carrier. I plan to work on that once I finish up a few bugs that I have left. Nothing major though.
Sent from my Pixel 2 XL using Tapatalk

I know that USA carriers have some strange implementation of IMS (Don't know much about just know it doesn't work on phones outside of the USA most of the time)
I can certainly test it on a more standard IMS setup which actually has no ODM image installed for my carrier.

klabit87 said:
Share the recovery log please.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
here is the recovery.log

xjqlfq said:
here is the recovery.log
Click to expand...
Click to collapse
I've seen this only once before. Your partitions are different than standard. You'll need to flash TGY firmware in order to flash lineage.
Sent from my Pixel 2 XL using Tapatalk

If you guys want ota via the lineage updater just add this line to your/system/build.prop
Code:
lineage.updater.uri=https://raw.githubusercontent.com/klabit87/OTA/master/crownqltechn.json
In my tests, ota zip didn't want to auto install in twrp for some reason. Maybe that can resolve later but it's easy to navigate to /data/lineageos_updater and install the rom zip. My searches indicate it's a common issue sometimes?
This will be included in future builds. This is for those that want to get ahead.
I plan to upload an update/ota tomorrow.
Sent from my Pixel 2 XL using Tapatalk

Just released an update with lots of stability and sepolicy fixes.
I also implemented OTA in this build and will be using Github.

Updated with latest June security patch and a few stability fixes. The screen lockup some are experiencing is still a problem I havent been able to fix it just yet. But I am working on it for sure.

hi sir, would this ROM work on N960u? I dont live on the US so i do not care about carrier features.. You will add ONEUI 2.1?

RSDoTTo said:
hi sir, would this ROM work on N960u? I dont live on the US so i do not care about carrier features.. You will add ONEUI 2.1?
Click to expand...
Click to collapse
No
Sent from my Pixel 2 XL using Tapatalk

klabit87 said:
No
Click to expand...
Click to collapse
Hi
Do you mean it wouldn't work with N960U1 or you won't bring the one ui 2.1?
Thanks
Edit:Sorry my bad different versions
Was hopeful got a rom and unlock method for N960U1

Batsy538 said:
Hi
Do you mean it wouldn't work with N960U1 or you won't bring the one ui 2.1?
Thanks
Edit:Sorry my bad different versions
Was hopeful got a rom and unlock method for N960U1
Click to expand...
Click to collapse
No to both.
I mean a custom rom such as lineage could be possible for your locked devices but not my builds.
You'd need to find someone willing to put the effort in to create a custom rom compatible with you guys' particular situation.
Sent from my Pixel 2 XL using Tapatalk

Just updated the op with a link to my new chat. Sorry for the inconvenience, you may leave the old one and only have the new one. I am migrating things now.
Sent from my Pixel 2 XL using Tapatalk