[Completed] How to repair Karbonn Titanium Octane Plus? - XDA Assist

I have Karbonn Titanium Octane Plus from past 2 months(my 4months savings). I wanted my phone to have Android 'L' so i searched in google but couldn't find any. But found some custom rom of cyanogenmod cm11 of elephone. Installed it using TWRP v2.8.2.0 as shown in tutorials with all the adequate software to be install for my laptop. After intalling cm11, Android version got upgraded from 4.4.2 to 4.4.4. I was happy and exited for some period. after few days felt the earlier os was better as it had video recording and FM player. so wiped the phone to install stock rom of Karbonn Titanium Octane Plus but couldn't as the error occurs shows as mentioned below:
E : Unable to mount ' /system'
Please Help........

Hello,
Welcome to XDA.
When you flashed TWRP did you make a nandroid backup of your stock ROM in TWRP? Making backups in custom recovery is the most valuable part of having custom Recovery. If you did make the backup of stock then all you need to do is select the restore option in TWRP and restore your nandroid and you should be fixed.
If you didn't make the backup then you'll have to download your stock firmware and flash it via PC and your device's compatible flashtool.
you should find what you need in the thread linked below in post #3.
http://forum.xda-developers.com/android/help/karbonn-titanium-octane-plus-guide-faq-t3054635
If you have questions of how to use what you find in that thread, you can post in that thread or you can post in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.

Related

[Completed] [q] two recovery sofware in my samsung gt-n7000

I had rooted my Samsung Galaxy Note GT-N7000 recently using Philz Touch5 CWM v6.0.3.2 and then I decided to put custom ROM OMNI nightly 4.4.4 -2014/09/09 to have android KITKAT 4.4.4 and I read on some threads that a minimum of CWM v6.0.4.4 and above is required to have KITKAT so I again had flashed or put Philz CWM v6.41.6 and then put OMNI ROM. Now KITKAT is working fine but then I try to backup KITKAT so that I can switch to Stock ROM and Custom Rom whenever I feel like but then while booting up the recovery software was changed by itself and then I show that I have two recovery Software- Clockworkmod and TeamWinRecovery. So problem is I had backed up the new custom Rom but that is done by TWRP whereas stock Rom was through CWM so a big problem is when I want to switch the two ROM. If both the ROMs were done by same recovery then must have been better but now I have to loose either of the two ROM's data then there is no meaning of backup :crying:
i also had installed ROM manager Please help... any advice would be very thankful. and sorry i wrote lengthy but i wanted to describe in precise way
dayal vandan said:
I had rooted my Samsung Galaxy Note GT-N7000 recently using Philz Touch5 CWM v6.0.3.2 and then I decided to put custom ROM OMNI nightly 4.4.4 -2014/09/09 to have android KITKAT 4.4.4 and I read on some threads that a minimum of CWM v6.0.4.4 and above is required to have KITKAT so I again had flashed or put Philz CWM v6.41.6 and then put OMNI ROM. Now KITKAT is working fine but then I try to backup KITKAT so that I can switch to Stock ROM and Custom Rom whenever I feel like but then while booting up the recovery software was changed by itself and then I show that I have two recovery Software- Clockworkmod and TeamWinRecovery. So problem is I had backed up the new custom Rom but that is done by TWRP whereas stock Rom was through CWM so a big problem is when I want to switch the two ROM. If both the ROMs were done by same recovery then must have been better but now I have to loose either of the two ROM's data then there is no meaning of backup :crying:
i also had installed ROM manager Please help... any advice would be very thankful. and sorry i wrote lengthy but i wanted to describe in precise way
Click to expand...
Click to collapse
I think it's not an issue.
If you want to go back to stock rom, flash cwm recovery and then restore the cwm nandroid backup.
If you want to restore the Kitkat rom, flash TWRP recovery and then restore the TWRP backup.
And in philz-touch cwm recovery you can set the default backup format to TWRP.
Check [PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA thread for details.
If you have further questions, please ask in the [FAQ] [Q&A] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE thread.
My tapatalk signature:
Device: SGS5 (SM-G900F)
ROM: AllianceROM v5.1
Kernel: Stock G900FXXU1ANG7
Recovery: PhilZ-touch
Modem: G900FXU1ANG7
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
... for the SGS5, just ask in the Noob friendly S5 All in one support thread
If you need general help/assistence, please go to XDA-Assist.
Restoring the old backup also didnt work
Sir if I first root the stockrom android 4.1.2 by CWM Base v6.0.3.2 which is Philz Touch 5 and then reinstall a higher version CWM v6.0.4.4 and above then do i need to reboot into recovery again or what all must I do like wiping etc?? literally it must be like upgrading CWM versions. I am just a beginner so have multiple doubts:angel: And Sir I made 2 backups of stockROM one by CWM and other by ROMmanager but the backup by CWM says error while restoring at final end and restoring backup of ROMmanager does restore but there is no Setting Menu and some menus after restoration. Main problem is without Setting Menu!
Sir I am thinking to reflash the stockROM through ODIN by PC so please guide me as to how can I use one Single Recovery Software either CWM or TWRP and then again backup both the stockROM and KITKAT customROM so that I can latter switch to either of the two ROM when I want.
Again sir thankyou for the previous help and I do want ur valuable guide here too
dayal vandan said:
Sir if I first root the stockrom android 4.1.2 by CWM Base v6.0.3.2 which is Philz Touch 5 and then reinstall a higher version CWM v6.0.4.4 and above then do i need to reboot into recovery again or what all must I do like wiping etc?? literally it must be like upgrading CWM versions. I am just a beginner so have multiple doubts:angel: And Sir I made 2 backups of stockROM one by CWM and other by ROMmanager but the backup by CWM says error while restoring at final end and restoring backup of ROMmanager does restore but there is no Setting Menu and some menus after restoration. Main problem is without Setting Menu!
Sir I am thinking to reflash the stockROM through ODIN by PC so please guide me as to how can I use one Single Recovery Software either CWM or TWRP and then again backup both the stockROM and KITKAT customROM so that I can latter switch to either of the two ROM when I want.
Again sir thankyou for the previous help and I do want ur valuable guide here too
Click to expand...
Click to collapse
I have already linked the FAQ thread for your device. Please read and ask there.
Maybe flashing back a stock firmware, rooting, backup and then flashing the Kitkat ROM again is a good idea.
Here is the Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.1.* thread which explains nearly everything you need.
Additionally, here is a detailed rooting guide: Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM
I have found a useful guide to flash Kitkat to your device: Samsung Galaxy Note GT-N7000 > Galaxy Note GT-N7000 General > [Guide] A guide to KitKat
And concering Kitkat installation, you can ask directly in this thread.
And please ask further questions in the threads of your device specific forum ... there you will get quicker and proper help :fingers-crossed:

[Completed] [Q] Samsung Galaxy Note GT-N7000 Upgrade to KitKat or lollipop

Hi Experts,
I want to upgrade my samsung galaxy note GT-N7000.
After reading on how to install custom rom to N7000. I tried one of the way to install the Custom Rom using Install from Zip using SD card.
Steps i have performed to install custom rom are mentioned below:
1. I have install one app to root my phone.
2. Checked with the help of MD5File checkup to confirm that my phone is rooted or not and found that my phone has been rooted.
3. I have gone to developer option and checked USB Debugging.
4. I have not installed any backup tool for the current recovery.
5. i have copied the N7000 CWM Nightly rom which is for KitKat, but it failed in the verification and errored with Status 7.
6. Then with some other roms its failing in status 6.
8. At last one rom Slimsaber got passed in the verification and removed the current rom but while installing or mounting its rom it failed....(This action is performed using Install using Zip from SD Card)
Result was that my phone got hung on the logo. But some how i managed to installed one korean rom on the phone which was having a older version i.e. 4.0.3 and its update was not available so i got my phone updated with the stock rom of 4.1.2 version from samsung store. So now its back to where i have started
Query:
1. Is that the reason i have not installed a custom recovery tool for the existing rom in case the new rom fails (I have missed 4th point: Is there any best app that backup for current stock rom)
Request:
1. Can you guys please tell me which is the ROM that works for N7000 India version for Kitkat and Lollipop(If available)
2. Please suggest the rom that works with Odin because i have bad exp with installing from SDcard. If possible please provide a link for that tar file.
Really appreciate your support and thanks in advance.
vikashashok said:
Hi Experts,
I want to upgrade my samsung galaxy note GT-N7000.
After reading on how to install custom rom to N7000. I tried one of the way to install the Custom Rom using Install from Zip using SD card.
Steps i have performed to install custom rom are mentioned below:
1. I have install one app to root my phone.
2. Checked with the help of MD5File checkup to confirm that my phone is rooted or not and found that my phone has been rooted.
3. I have gone to developer option and checked USB Debugging.
4. I have not installed any backup tool for the current recovery.
5. i have copied the N7000 CWM Nightly rom which is for KitKat, but it failed in the verification and errored with Status 7.
6. Then with some other roms its failing in status 6.
8. At last one rom Slimsaber got passed in the verification and removed the current rom but while installing or mounting its rom it failed....(This action is performed using Install using Zip from SD Card)
Result was that my phone got hung on the logo. But some how i managed to installed one korean rom on the phone which was having a older version i.e. 4.0.3 and its update was not available so i got my phone updated with the stock rom of 4.1.2 version from samsung store. So now its back to where i have started
Query:
1. Is that the reason i have not installed a custom recovery tool for the existing rom in case the new rom fails (I have missed 4th point: Is there any best app that backup for current stock rom)
Request:
1. Can you guys please tell me which is the ROM that works for N7000 India version for Kitkat and Lollipop(If available)
2. Please suggest the rom that works with Odin because i have bad exp with installing from SDcard. If possible please provide a link for that tar file.
Really appreciate your support and thanks in advance.
Click to expand...
Click to collapse
You should install/flash a custom recovery and make a complete system (nandroid) backup directly in the custom recovery.
There are some other apps, which can create an Online Nandorid backup (just check Play store), but some apps are not compatible with all devices and to restore such a backup, you will need a custom (CWM or TWRP) recovery anyway.
To get best advices about custom recovery, ROMs, etc. for your device, please ask in the Galaxy Note GT-N7000 Q&A, Help & Troubleshooting > [FAQ] [Q&A] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE thread.
P.S.: To install/flash a custom ROM provided as zip file, you usually need a custom recovery. Stock recovery only flashed signed zip file (e.g. official OTA update files from Samsung).
Thread closed and thank you.

[Completed] I need a custom or stock rom for my mt6572 phone. (Viwa Max)

I was trying to install a custom rom on my phone . I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
I have tried flashing back the stock recovery using a scater file and Sp flash tools, but it stucks at download section for a long time without starting. If i could get a working custom Rom i would be very happy. I early posted this but realised i didnt log in before posting. Thanks in advance.
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] how to get back stock recovery on huawei honor holly(3c lite)

i first had philz recovery. then flashed cwm recovery using flashify but now not able to get into recovery mod.
Hello,
Welcome to XDA.
If you want your stock recovery back then you will need to restore your stock firmware via PC using your device's flashing software.
Find your stock firmware and restore it by following the instructions in the thread linked below.
http://forum.xda-developers.com/android/general/guide-huawei-honor-holly-stock-rom-t3031466
Remember to register an XDA account so you can post and reply in the forums if you need more help or have questions, if you need to do that then try posting your other questions in the forum linked below.
http://forum.xda-developers.com/android/help
Good luck.

Trying to find the ROM I used from last year

Hi Guys,
I had a 6.0.1 MM custom ROM (found here in the ROM section) installed on my Galaxy S7 SM-930F last year. I made a TWRP backup prior to upgrading to Nougat however stupid me I have forgotten a folder to manually back up when I was on MM. I've tried to downgrade and restore using TWRP to no avail.. it would say the restore is complete and stay stuck on the Samsung logo. My nanadroid backup ends with G930FXXU1APGH so I searching the ROM section of XDA forum to see if I can go back to what I installed as it appears I have no record of the ROM I downloaded here so I can restore the backup successfully. The backup I am trying to restore is from TWRP 3.0.0 and I am now using a 3.1.1
My questions are:
1.) Do I need to be on the same exact build number of Marshmallow for the TWRP restore to work? (I've tried older/newer TWRP/different build # for Marshmallow)
2.) Is there a best way to find out which custom rom I installed last year (search function?)? All I know is that my backup ends with G930FXXU1APGH so that build # is the only lead I have to search through the forum
3.) Restoring the backup always leads to a stuck Samsung logo. I've tried different TWRP, rooted and gone to Nougat/MM and restoring from there, cleared data/factory settings/cache etc. Any other suggestions?
Thank you for your help.

Categories

Resources