COLOR ROM for GIONEE Dream D1/Walton Primo X1
Be care full I am not responsible for anything happen to your device whether good or bad.
System partition requirement is around 800MB, if you don't have don't go ahead
Download:
Dream_D1_COLOR_V2
GPS Patch
put zip file in sdcard and install from recovery.
Installation Instruction
Take backup first
1. Download ROM from above link.
2. Put it in your SDCARD.
3. Reboot into Recovery.
4. Do factory reset(format data and catch partition).
5. Install Downloaded file.
6. Reboot..
7. Wait some time.. first boot takes time(3 to 5 minutes).
Working
Bugs
Waiting for someone report..
reserved
deepak2111 said:
COLOR ROM for GIONEE Dream D1/Walton Primo X1
Be care full I am not responsible for anything happen to your device whether good or bad.
System partition requirement is around 800MB, if you don't have don't go ahead
Download:
Dream_D1_COLOR_V2
Installation Instruction
Take backup first
1. Download ROM from above link.
2. Put it in your SDCARD.
3. Reboot into Recovery.
4. Do factory reset(format data and catch partition).
5. Install Downloaded file.
6. Reboot..
7. Wait some time.. first boot takes time(3 to 5 minutes).
Working
Bugs
Waiting for someone report..
Click to expand...
Click to collapse
Can you give the process to increase the system space
@debasish497 i need to analyse and test first, till you can flash stock rom by using SPFLASHTOOL and then custom recovery then color rom,
Stock have 830 MB if system partition.
Sent from my R819 using xda app-developers app
deepak2111 said:
@debasish497 i need to analyse and test first, till you can flash stock rom by using SPFLASHTOOL and then custom recovery then color rom,
Stock have 830 MB if system partition.
Sent from my R819 using xda app-developers app
Click to expand...
Click to collapse
Hi
I have a equivalent (Allview P6 quad)
Please point to what stock you refer to ... this one ? http://androidxda.com/download-gionee-stock-rom-models
My current 4.2.2 Walton has a 630 mb system partition
Also, what is the version of Android in your color rom
Thank you
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
puduraja said:
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
Click to expand...
Click to collapse
thanks a lot
will give a try n let u know abt performance n any other things
Downloaded...Flashed...Bricked...Recovered.
XOLO Q3000 RECOVERY COLLECTION
Hiii All XOLO Q3000 users,
I bring to you collection of recoveries for our beloved XOLO Q3000.
STOCK RECOVERY
Jelly Bean
JB 4.2.1 S003
JB 4.2.1 S011
KitKat
Kitkat 4.4.2 S007 version
======================================================================================================
CUSTOM RECOVERY FOR ANDROID JELLY BEAN
Carliv Touch Recovery BASED
Carliv Touch Recovery v2.1
Carliv Touch Recovery v2.2
Carliv Touch Recovery v2.4
Carliv Touch Recovery v2.5
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ClockworkMod- CWM- BASED
CWM 5.5.0.4
CWM 6.0.2.8
CWM 6.0.3.2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
====================================================================================================
CUSTOM RECOVERY FOR ANDROID KITKAT
ClockworkMod- CWM- BASEDCWM based 6.0.2.8
ClockworkMod 6.0.3.3 Recovery (CWM) Non-touch
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Carliv Non-Touch Recovery BASED
Modified Carliv CWM (non-touch) CWM 6.0.4.4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Carliv Touch Recovery BASED
Carliv Touch recovery 3.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PhilZ Touch BASED[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 aroma fixed
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1 aroma fixed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TeamWin Projects - TWRP BASED
TWRP 2.7.0.0
TWRP 2.8.0.0
TWRP 2.8.1.0
TWRP 2.8.2.0
TWRP 2.8.4.0
TWRP 2.8.4.0 rev 2
TWRP 2.8.5.0
====================================================================================================
So dont get confused which one to use from all above.
THE BEST CUSTOM RECOVERY
For JELLY BEAN Carliv Touch Recovery v2.5
For KitKat- use anyone
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
TWRP 2.8.5.0
Test and report.
If you have any other working recovery please PM me.
HOW TO USE/FLASH CUSTOM RECOVERY.
CREDITSCredit goes to all involved in making them. (CWM team, TWRP team, PhilZ team, Carliv,yuweng)
hadiyalkishan- for JB & KK stock & testing
m0han - for ctr 2.5, for JB testing
rufus.reynolds - for KK testing
Jagadish-ravi - for JB & KK testing
vijay jay - for TWRP 2.7 testing
@Santhosh M - for TWRP 2.8.1.0
Thank You... Share Your Views...
Many users dont know how to flash a custom recovery.
so i am making this thread which will guide u to flash a custom recoveries present in above thread.
If ur phone is rooted (supersu/superuser app is present in app drawer).
Method 1
Download and install flashify app from playstore
download custom recovery from above post.
Open flashify.
Backup current recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto flash
recovery image
Choose downloaded recovery.img (it may have different name)
Now u can reboot.
To boot into recovery
press vol up button, keep it pressed.
press power on button till u see boot logo.
release power button.
after going into recovery release vol up button.
Method 2
Mobile uncle tool
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
If ur phone is not rooted
What's needed:
USB data cable
MediaTek USB VCOM drivers thanks to @smokerman sir
SP Flash Tool
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
Press download button.
attach ur switched off phone with usb cable.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
PLEASE PRESS THANKS BUTTON IF THIS HELPS
This just keeps getting better and better.....thanks millions....Avi....well collated recovery thread.....its has everything we need....
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Vineet3 said:
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Save ur recovery and try S011.:good:
CTR 2.5 can be used to flash both JB & KK ROMs.
but backup & restore is not possible.
Thanks to @Jagadish-ravi
stuck at download mode
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Sagar_Patel said:
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Click to expand...
Click to collapse
First thing is
Please dont quote whole post.
it is posted by me only and just few post above on same page.
Ur screenshot is very poor cant see anything please re upload with good resolution.
after pressing that download button u need to connect ur phone in switched off condition.
r u doing this as instructed.??
Please explain the process ur following?
Ur porting cwm means??
Or u mean to say flashing/installing??
which cwm ur using please specify.?
ow! sorry for the way i had posted the thing but thanks for the way you replied- it was quite Quick!!
so, herewith i have attached the zip file (for the better resolution) and jpg file as well (size i could manage within the limitation of this forum) of screenshot where i stuck...View attachment 083.zip
yes, i connected my phone in switched off condition after pressing download button...
i had followed exactly the same way as you have explained for the non-rooted device....
and it was newbie thing that i had written "porting cwm" instead of "installing/flashing cwm"...yes, i was trying to flash/install cwm...
recovery i tried to install is:- [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Thanks for helping me...
sorry i had just forgotten to mention the scatter file i had used....obviously yes, it is the same as you have uploaded as:-
avi3230 said:
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
Click to expand...
Click to collapse
however, i had to rename it as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php
also note that i had put zip file of recovery [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 and that scatter file in same folder as well....
kindly check if i had done any mistake there...
i have attached the scatter file to which i had renamed...
sp flash tool stuck at download mode?
ok may be i have found the mistake while posting just above the procedure i had done!!!
sp flash tool stuck at the download mode may be because i had done mistake (if it is?! ok, i cant confirm it until i can get xolo q3000 back to me or until someone here can confirm that yes, this was the mistake) as below:_
i had downloaded zip file of recovery
then i had downloaded scatter file of xolo q3000 as mentioned in my previous post
i had renamed the scatter file i had downloaded as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php (may be silly newbie thing here!!!)
i had put both those files in same folder
and did rest of the procedure as mentioned by avi3230 (OP) here in same thread for non-rooted xolo q3000 just a few posts above...
...and what should i have done?
i should have downloaded only the zip file of desired recovery and then if i extracted it, i could find that there are all the necessary files including recovery.img and scatter_file within the extracted folder!!!
i would like to attach screenshot of wrong thing i had done:- image named as "wrong"
and what i should have done is may be here:- image named as "may be"
i think i was trying to install zip file instead of recovery.img that should be there in extracted folder of recovery.zip along with the scatter_file as well...so, here now i have got where and why i had confused
Put scatter file and recovery image in same folder.
Click to expand...
Click to collapse
ok, if zip file of recovery has properly zipped, has properly downloaded and if it has properly extracted then you should find both the recovery.img and scatter_file within extracted folder....if not so, then you should put (get together) the scatter file and recovery image in "same folder" means in extracted folder....
confused? then i can only say sorry for my english but why i had posted the whole thing here? may be because someone can find that what kind of silly things those can be done by newbies....and if so, they can help....
Sagar_Patel said:
ok may be i have found the mistake while posting just above the procedure i had done!!!
.
Click to expand...
Click to collapse
OK dont worry about ur English or anything wrong u doing.
just follow these steps
this is considering ur running kitkat on ur phone (S003 or S007 build no)
download
1. SP_Flash_Tool
2. philz recovery - this or this
3. drivers - from here
extract drivers folder- mtkusball 0.9.2
open smartphone driver folder - x86/x64 according to ur windows os and install drivers.
or just select from autoinstall folder
connect ur phone in switch off condition to pc.
when asked fro drivers use MT65xx preloader drivers.
when u connect switched on phone and if asked for drivers use - android winusb drivers.
(please check in device manager after connecting ur phone in each case whether drivers are installed or any red triangle is ther)
restart ur computer.
extract sp tools in folder
extract philz recovery in a folder (it is in 7z or rar format just extratc in folder in winrar)
in philz folder u have scatter file, recovery.img boot.img and lk,bin files
start sp flash tools
select scatter loading
select scatter file from philz folder
deselect uboot and bootimg
press download button
connect ur switched off phone to usb cable.
flashing will be done
confirmed by green circle.
boot in recovery by pressing power + vol up button.
Reply if any issues.
avi3230 said:
OK dont worry about ur English or anything.....
....Reply if any issues.
Click to expand...
Click to collapse
just to add.... tip1: use usbdeview (g00gle) to remove all usb devices before adding your mobile device.
tip2 (based on my experience): try a previous (older) clean version of w!nd0ws also before giving up.
avi3230 said:
TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
THE BEST CUSTOM RECOVERY
For JB
Carliv Touch Recovery v2.5
For KK
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Click to expand...
Click to collapse
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
m0han said:
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
Click to expand...
Click to collapse
Yeah already seen that no support for philz now.
TWRP is bigger in size and u need to change partition size of recovery.
which is another headache for TWRP.
I already have it but again u need to flash whole stock rom again as whole
preloader boot recovery will change.
avi3230 said:
....TWRP is bigger in size and u need to change partition size of recovery.....
....I already have it but again u need to flash whole stock rom again as whole preloader boot recovery will change.
Click to expand...
Click to collapse
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
m0han said:
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
Click to expand...
Click to collapse
As TWRP is larger in size most of the time it wont boot in recovery.
also backing up of recovery wont work on 7mb recovery partition in any cwm based recovery.
So i feel we should stick to philz.
avi3230 said:
.....i feel we should stick to philz.
Click to expand...
Click to collapse
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
m0han said:
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
Click to expand...
Click to collapse
I already have twrp made for device which is easy.
its size is more than 6mb which is the issue.
u can change size of recovery to almost 11mb but then it wont boot in recovery specifically on 6589 chipsets. then whats t use.
to make it boot in recovery we need to change values in preloader.bin which is difficult task.
if anyone working on ubuntu please make an kernel with drivers files from this source.
if using this kernel twrp is less than 6mb then everything will be fine.
Getting short of memory with 1Gb internal Memory only? even tried 2.73Gb mod available but then you still run out of space as you can not move apps to the SD card?
Every time you need to flash a new ROM you need to revert back to the original storage by flashing and restoring... lengthy process.. here i put up a solution for all of you guys using the device or any of its clone. i have Qmobile A700 and tested this on Walton Primo N1 as well...:angel:
Do it ONCE and keeps same storage FOREVER. no matter how many ROM's you change or Flash via custom recovery.
Point to Note here is if you flash this method your current ROM will remain installed, only changes that will incur are Logo shall be replaced, partitions shall be modified and recovery will b replaced with twrp. If you need to keep current logo and recovery then replace the logo.bin and recovery.img with the ones you need to keep in the folder files_to_flashtool you can go to any ROM you want after this. Even when you are flashing a new ROM you don't need any zip to change storage, like it used to be with 2.73Gb Mod. just flash the ROM and you will have 2.49Gb Internal Storage in any rom. But Please take Backup of your Phone just in case anything goes wrong. i shall not be responsible for anything bad happening to your phone if you don't follow the method PROPERLY.
Method and Instructions.
1. Download the files from the Link given at the end.
2. Unzip the folder Tools.zip.
3. Unzip the Drivers Folder.
4. Install Drivers on your PC install ADB and fastboot drivers and device drivers as well.
5. Now Unzip SP Flash Tool 3.1352.01 (5.1352.01).rar and Files_to_FlashTool.zip
6. Turn off phone.
7. Pull out the battery
8. Run sp flash tool.
9. Load scatter file(MT6589_Android_scatter_emmc_PMT.txt) in the files_to_flastool folder. All items will b auto selected.
10. Click download
11. Put battery in the phone and connect cable.
12. The progress bar in sp flash tool will start and a green circle will pop up when done.:highfive:
After process is complete, disconnect the phone from the PC and reboot. Enjoy you have 2.49Gb internal Storage now.
and you will have twrp recovery installed as well after flashing just putting here so that if u want to take backup of current recovery or not.
Downloads
Tools.zip
Files To FlashTool
Credits
Mohammad Ali, Rasel Shiplu for helping and testing this out with me. and Piyush Tilva for Porting Android L Rom for our Devices. Salutes to you all
video tutorial how to flash and the Work Around for if you get stuck on boot logo
Here is the video tutorial how to do it
http://nibs.tinytake.com/sf/OTcwMDFfNjUxODgy
Please note you may require a work around to get it working if you are on stock ROM. so please please keep backup of your ROM before following this method. i shall not be responsible for any loss of Data or damage to your device. …
After the process was finished i rebooted my phone on the stock ROM, it did not boot. so i figured out a workaround for stock ROM users, after the flash is complete when you are on stock ROM (or even any other custom ROM) and phone does not go beyond boot logo, reboot to recovery and restore your TWRP backup.... after the process is complete reboot and enjoy 2.49Gb internal storage or you can also flash this and then install any custom ROM over it. and still you will have 2.49 mod. and it will remain the same untill you restore stock ROM using SP Flash Tools.
Thanks and Enjoy :good::laugh:
Dont forget to hit thanks if i helped you.
PHONE SPECIFICATIONS :
MODEL: LAVA V23GB
KERNEL VERSION : 3.18.19
ANDROID 6.0
STAR OS
MT 6735M
The rooting method is for the phone with above specifications
ROOTING METHOD
1)FLASHING TWRP
2)FLASH SUPERSU
TWRP FLASHING:
LAVA V23GB is a very good phone and has very good configuration but it is less popular and less used by developers because of other similar models like lava pixel v2 2gb and lava pixel v2 3gb.
So I made the twrp myself.
Inorder to flash twrp u have to install spflash tool in your pc
After installing spflash tool run flash_tool.exe select scatter file and tick on recovery (download link for twrp and scatter file below)
Then keep download only and click download button and connect your phone to pc
The flashing process will start automatically
After flashing twrp dont power on your phone. Just disconnect the usb and enter into recovery mode by clicking power + volume button and select recovery mode (If u simply power on your stock recovery would replace twrp so dont directly power on)
Now u will enter into recovery mode
Thats it u flashed twrp
2)flashing Supersu :
Download the supersu zip file and copy it to sd card
Then go to recovery mode into twrp
Click install and select storage and select sd card then select the supersu.zip file and swipe to flash
Clear cache/dalvik cache
Then reboot your phone
Your phone will be rooted. you can check using root checker app
Download links :
Twrp and Scatter file :https:// drive .google .com/ open?id=0B_Ic1h9dY4J8VVNtWDB1dmt2UDQ (remove spaces )
Supersu : https:// drive.google.com/ open?id=0B_Ic1h9dY4J8WWRGN0k5dUZ4aVE
Twrp made by Azizur Rehman Shikdhar
Ported by Mudunuri Sriram (me)
Porting guide by Keng Natan Singse and Utkarsh
My contact details
fb.com/ mudunurisriram
phone no:8106357947
thanx a lot man..
please make scatter file and twrp for lava x81 also i will be very thankful of you
send the stock recovery
GAGAN MALLI said:
please make scatter file and twrp for lava x81 also i will be very thankful of you
Click to expand...
Click to collapse
send the stock recovery