Safe to use a cutdown SIM card? - HTC One A9

I just received my unlocked A9 this afternoon. I had planned to cut down my AT&T SIM from my M7 to fit the A9, but I read in the instructions specifically to *not* do that. Is that really a concern? Do I need to go out and get myself a specific SIM card or can I safely cut down my M7 SIM and use it in the A9?
Thanks,
Craig

csetera said:
I just received my unlocked A9 this afternoon. I had planned to cut down my AT&T SIM from my M7 to fit the A9, but I read in the instructions specifically to *not* do that. Is that really a concern? Do I need to go out and get myself a specific SIM card or can I safely cut down my M7 SIM and use it in the A9?
Thanks,
Craig
Click to expand...
Click to collapse
I'm always cutting my sim cards when I need to, they ask you not to cut it because you might break it or take off the metal slide by mistake
I don't know about at&t but if it cost a lot to have new sim card try to cut it and if you fail you can buy new one anyway
you can look in amazon for sim cards cutter which will help you to cut it sharply.
I cut the sim cards by scissor when I need

muhammaf1992 said:
I'm always cutting my sim cards when I need to, they ask you not to cut it because you might break it or take off the metal slide by mistake
I don't know about at&t but if it cost a lot to have new sim card try to cut it and if you fail you can buy new one anyway
you can look in amazon for sim cards cutter which will help you to cut it sharply.
I cut the sim cards by scissor when I need
Click to expand...
Click to collapse
Thanks. I ended up giving it a try (with a SIM cutter). Unfortunately it didn't work. I went to the AT&T store this morning and they took care of me for no cost.

csetera said:
Thanks. I ended up giving it a try (with a SIM cutter). Unfortunately it didn't work. I went to the AT&T store this morning and they took care of me for no cost.
Click to expand...
Click to collapse
That's too bad it didn't work out. I have an an older cut SIM that I use in mine and it works OK.

I use cut sims all the time, only danger I see is you don't know what you are doing, flake of metal falls off and shorts, jams slot etc. Basically, and I get it, there is more chance for the average user to screw something up, so they don't want you to do it! Not that it wont work.

Related

Micro SIM to full size SIM adapters for G2.

Has anyone used a Micro SIM to full size SIM adapter with a G2 or G1?
http://www.amazon.com/AFC-Trident-M...JQVU/ref=sr_1_2?ie=UTF8&qid=1336362098&sr=8-2
The reviews mention a reference to it working in an HTC Sensation and an HTC TITAN.
Problem: My new phone (Samsung Galaxy S3) uses a Micro SIM. But I still want to run my old G2 or even the G1 as spare/backup phones. For when I go somewhere I don't want risk damaging the new phone. Once I move my account over to the Micro SIM, the old full size SIM will be dead.
The T-Mobile guys at the store said they would re-program a full size SIM from a micro size SIM, but I don't want to have to go down to their store just to do that!
And cutting a full size SIM down to a Micro size SIM isn't going to help me go back and forth.
I know it's only a buck for this particular adapter, but I don't want to wedge something into my G2 that's going to not work and mess it up. That's why I'm asking if anyone has had any good or bad experiences dealing with this yet.
Well the SIM slot is basically quite simple there's real nothing to snag onto as you're just making sure to face the contacts towards the phones contacts and just sliding past them. With no vertical room to move (only horizontal in and out that has next to no wiggle room) I double very much you could actually damage the phone with said adapter.
This however concerns me: "Simply cut the GSM sim card to fit the adapter (please make sure you do not cut the metal contact.)"... if you go thru with it, I recommend using a razor blade like in those house blade assemblies, instead of scissors.
For a free micro sim adapter, order a giffgaff sim below as it comes as a microsim inside a normal sim so you can either use the new sim or use it as a template to cut your old sim to size.
Order from below
rwitmer said:
Has anyone used a Micro SIM to full size SIM adapter with a G2 or G1?
http://www.amazon.com/AFC-Trident-M...JQVU/ref=sr_1_2?ie=UTF8&qid=1336362098&sr=8-2
The reviews mention a reference to it working in an HTC Sensation and an HTC TITAN.
Problem: My new phone (Samsung Galaxy S3) uses a Micro SIM. But I still want to run my old G2 or even the G1 as spare/backup phones. For when I go somewhere I don't want risk damaging the new phone. Once I move my account over to the Micro SIM, the old full size SIM will be dead.
The T-Mobile guys at the store said they would re-program a full size SIM from a micro size SIM, but I don't want to have to go down to their store just to do that!
And cutting a full size SIM down to a Micro size SIM isn't going to help me go back and forth.
I know it's only a buck for this particular adapter, but I don't want to wedge something into my G2 that's going to not work and mess it up. That's why I'm asking if anyone has had any good or bad experiences dealing with this yet.
Click to expand...
Click to collapse
When i went to t-mobile to get a replacement sim (the old one started to bow and didnt always make contact) they duplicated it for me, and gave me both the old one and the new one, saying if it ever stopped working right that the old one would work still. Why not got ask for a new one? then you have two sims that are functional, you can have one full size and one micro ?
i know you want to avoid the store but it might be a simpler solution
I use a micro sim card in my desire z without any adaptors. I just slot it in where a normal sim should be and it works.
But it's a bit fiddly
Sent from my HTC Vision using Tapatalk 2
thre3aces said:
I use a micro sim card in my desire z without any adaptors. I just slot it in where a normal sim should be and it works.
But it's a bit fiddly
Sent from my HTC Vision using Tapatalk 2
Click to expand...
Click to collapse
So do I, perfectly working
I have nano SIM and adapter, working without problem

[Q] Help needed with Sim Card Adapter

I recently switched over to AT&T and picked up a Moto X and a Nexus 5. After getting all of my accessories in the mail for the N5 I decided to switch over to it to use it as my daily phone. But after removing the sim card tray for the Moto X I realized its a nano sim. I was going to buy a sim card adapter to switch between the two until I seen all the bad reviews. So, should I just take a lose and just spend $25 on a new sim, or does anyone know of a sim apapter that will not mess up my N5?
Not sure what you meant by messing up? Please be specific and/or link incidents relating to the N5 & Moto in question.
I've been using Noosy brand adapters for 2 of the 3 sim sizes just fine - except for the nano ... Always exercise careful when pushing the tiny tool into the pin hole.
If you insert the sim/adapater slowly & carefully into the holder, then push it in to lock - it should be fine & not moved around.
I have gotten free T-Mo sims as spare, just in case (otherwise, it's $10 or less with agents/resellers.) My understanding is that AT&T should give you a free sim if you are switching devices - but $25 is mad crazy - go to another corporate store. If you are going to switch back & forth between devices using different sized sim, use of the adapter isn't an option, it's necessary.
Another thing to note: please do not insert an empty SIM card adaptor into the SIM tray. you might end up getting the adaptor stuck inside the phone.
If you walk into a corporate AT&T store they will replace the SIM for free (and insist on activating it on the spot). If you call customer support, they will send you a free replacement SIM which has to be activated within 3 days.
Thanks! I'm going to give the adapter a try. I still want to be able to go between my Moto X and the N5.
dskw_ said:
Another thing to note: please do not insert an empty SIM card adaptor into the SIM tray. you might end up getting the adaptor stuck inside the phone.
Click to expand...
Click to collapse
Ditto on this one - I did it to my N5 and had to take it apart to get it out. My own fault for not thinking through...
With the Moto X sale going on tomorrow, I was having this same situation.
Are the Noosy brand adapters the best? I'm not that worried about price but I would prefer something from the states (Amazon Preferred). Aside from putting an empty adapter in the phone and not jamming it in quickly, is it pretty fool proof?
Is T-mobile pretty easy going with switching out a micro sim with a nano or do they charge a fee? I could also go the route of cutting it myself. Are any of the cutting tools that useful or is a steady hand manual the best policy?

Broke the sim reader.

So hmm i finally decided to use moto g as my main phone.
Got the nano --> microsim adaptor from a local store.
Inserted the sim. Sim doesnt get detected. Tried removing the sim. STUCK!. I think i broke the simreader pins without even actually using a phone.
I just contacted the motorola people.Too bad my phone is bought from usa and im in india till July. Anyone here has a guide on how to change the sim slot?!? I managed to remove the damn adaptor but i broke the pins so i guess i m screwed.
Same here. I'm going to buy a replacement for the SIM tray off ebay, and have it replaced (guys in my local store said it would cost $13, but another store asked for $20, so the prices may vary). I'm in Poland.
Hi, i have the issue with my moto g. I fix the problem manually using a little piece of metal to make sure that the pin I broke touch the Sim. But that's was my case, I recommend you to go in a technical service, they can put a new sim reader and this cost about 20$.
Motorola already realized that this is a serious problem, because in my Moto G 4G with LTE User Guide they clearly mention on 4th page: "Caution: Make sure you use the correct sized SIM card, and don’t use adapters with it."
How did you do it
guillecod said:
Hi, i have the issue with my moto g. I fix the problem manually using a little piece of metal to make sure that the pin I broke touch the Sim. But that's was my case, I recommend you to go in a technical service, they can put a new sim reader and this cost about 20$.
Click to expand...
Click to collapse
Hey man, I have the exact same problem, can you explain how you did that? did u use any adesive or something to secure the metal piece. Any tips would be appreciated. Thanks in advance.
guillecod said:
Hi, i have the issue with my moto g. I fix the problem manually using a little piece of metal to make sure that the pin I broke touch the Sim. But that's was my case, I recommend you to go in a technical service, they can put a new sim reader and this cost about 20$.
Click to expand...
Click to collapse
Screwed up my MG2013 sim1 with the adaptor, Moto warranty is over and they said no for repair
Tried to find a way out and used a screwdriver to raise the points but the gold points dont read the Sim any which way
I will probably look for a local shop who can replace the reader I guess
https://forum.xda-developers.com/attachment.php?attachmentid=3998359&d=1484063836
Anybody in here actually did this repair? I noticed there are differences between the new tray and my old one.

Uh Oh... Installing the micro sd and the micro Sim cards

OK... A hiccup I didn't expect. I have my phone turned over and I am looking at the orientation of the cards on the pictures on the back of the phone. I pulled out the little frames and tried putting the Sim card into the frame. Is it supposed to snap into the frame or something? That's what I assumed... I tried laying it UNDER the frame (oriented correctly). It never snapped in. I tried pushing the frame and the loose Sim card in. It wouldn't go and I got nervous. I pulled the frame out and a part of the Sim card plastic has cracked and so now I guess it is a nano sim card? All I know is that it is even too small to fit into my Note 3 anymore. Luckily, TMobile opens soon and is only 2 miles away... I guess I will ask them for more than one sim card to cover if I do this again... Because, of course, now I don't have ANY working phone! PLEASE help me figure out how to install the sdcard and the sim. I am too afraid to force anything... Does the card lay on top of the frame or go under it? Is it supposed to snap into the frame somehow? I am amazed that you all had no problems with this one!!!
Sent from my GEM-702L using Tapatalk
Read and watch the pics: http://forum.xda-developers.com/mediapad-x2/general/how-to-sd-card-sim-card-2-combo-t3195860
The SIM is glued to SD Card. In my case don't work, I don't know why, but is like you see in the pics.
executattor said:
Read and watch the pics: http://forum.xda-developers.com/mediapad-x2/general/how-to-sd-card-sim-card-2-combo-t3195860
The SIM is glued to SD Card. In my case don't work, I don't know why, but is like you see in the pics.
Click to expand...
Click to collapse
Thanks for that but my problem was simply ridiculous (much simpler than that) that I couldn't get it! I went to the TMobile store and while I was waiting I tried to install the sdcard. It was much brighter in there and my hands weren't shaking from nervousness (lol) and I got it! I had to get a new sim. She was going to charge me $15 for it. I said I thought they were free to customers... Well, I learned something new. That store is not a "corporate" location. It's a franchise! And they charge a lot of money for things "corporate" doesn't! $50 restocking fee for a phone - even if you only had it one day... $15 sim cards... Different things... The girl there ended up giving me the sim card free... So watch out where you are - ask if they are a franchise first. There was not ONE THINK posted in the store that indicated that! Even the girl that worked there agreed that was strange...
Sent from my GEM-702L using Tapatalk
VillaRegina said:
Thanks for that but my problem was simply ridiculous (much simpler than that) that I couldn't get it! I went to the TMobile store and while I was waiting I tried to install the sdcard. It was much brighter in there and my hands weren't shaking from nervousness (lol) and I got it! I had to get a new sim. She was going to charge me $15 for it. I said I thought they were free to customers... Well, I learned something new. That store is not a "corporate" location. It's a franchise! And they charge a lot of money for things "corporate" doesn't! $50 restocking fee for a phone - even if you only had it one day... $15 sim cards... Different things... The girl there ended up giving me the sim card free... So watch out where you are - ask if they are a franchise first. There was not ONE THINK posted in the store that indicated that! Even the girl that worked there agreed that was strange...
Sent from my GEM-702L using Tapatalk
Click to expand...
Click to collapse
Yeah, if you have a NanoSIM you will need to either get a MicroSIM or a SIM card adapter to convert the NanoSIM to a MicroSIM. The Nano SIM goes in the top tray so if you want to use a MicroSD card you have to put the SIM in the bottom tray.
It should come with an easy face up sim on bottom tray, SD card on top tray.
Rudolpht said:
It should come with an easy face up sim on bottom tray, SD card on top tray.
Click to expand...
Click to collapse
I knew that they went face up and the orientation of both the card and the frame but my hands were shaking so bad I couldn't get the card to comfortably "seat" on the top of the frame so I wondered if they went face up UNDER the frame... Lol... once my hands stopped shaking (and I realized that the card wasn't going to "snap" into the frame) I got it! But not before I cracked the plastic frame around the sim card that made it micro Sim sized... So I got a new card... I won't have that trouble again and I am actually trying to keep the back plastic protector on the phone to keep those invaluable pictures on the back!
Sent from my GEM-702L using Tapatalk
ajsmsg78 said:
Yeah, if you have a NanoSIM you will need to either get a MicroSIM or a SIM card adapter to convert the NanoSIM to a MicroSIM. The Nano SIM goes in the top tray so if you want to use a MicroSD card you have to put the SIM in the bottom tray.
Click to expand...
Click to collapse
Can two SIM cards be used together with the microSD so I would have two phone numbers and also the extra memory? Is the #2 SIM tray meant for both the SIM and the microSD card? OR is it used for either SD or SIM only?
tabletnewbie said:
Can two SIM cards be used together with the microSD so I would have two phone numbers and also the extra memory? Is the #2 SIM tray meant for both the SIM and the microSD card? OR is it used for either SD or SIM only?
Click to expand...
Click to collapse
The top one is either or but not at the same time.
Why have two SIM slot?
ajsmsg78 said:
The top one is either or but not at the same time.
Click to expand...
Click to collapse
Just curious why have two SIM slots when second one is available only and when you are willing to forgo the ability to add extended memory?
tabletnewbie said:
Just curious why have two SIM slots when second one is available only and when you are willing to forgo the ability to add extended memory?
Click to expand...
Click to collapse
I agree. They should have dual sim slots and a seperate MicroSD slot. Some phones do, this one doesn't.
ajsmsg78 said:
I agree. They should have dual sim slots and a seperate MicroSD slot. Some phones do, this one doesn't.
Click to expand...
Click to collapse
I wish I knew this before I ordered the phone!

Micro SIM to Nano SIM?

I have a phone on order (HTC 10) that takes a Nano SIM (4FF). My current HTC One (M7) has a Micro SIM (3FF), but looking at it, it appears as though a nano SIM (4FF) could be broken out from the Micro SIM (3FF), much in the way that many mini-SIM cards (2FF) can "break out" to become a Micro SIM (3FF).
Does this sound possible? I hope it's not too confusing how I have tried to posit the question. I'd like to be able to transform the micro SIM to a nano SIM when the new phone arrives without going to the T-Mobile Store.
Thanks.
e_s_jones said:
I have a phone on order (HTC 10) that takes a Nano SIM. My current HTC One (M7) has a Micro SIM, but looking at it, it appears as though a nano SIM could be broken out from the Micro SIM, much in the way that many mini-SIM cards can "break out" to become a Micro SIM.
Does this sound possible? I hope it's not too confusing how I have tried to posit the question. I'd like to be able to transform the micro SIM to a nano SIM when the new phone arrives without going to the T-Mobile Store.
Thanks.
Click to expand...
Click to collapse
I don't think you can because with a micro SIM the contacts come almost completely to the edge, trying to go smaller would compromise the contact area. Go to the store, there's a right way to do things and a wrong way to do things, engineering an alternate solution is only necessary when none already exist, in your case, alternatives exist.
This may help
Attached diagram of SIM form factors.
e_s_jones said:
Attached diagram of SIM form factors.
Click to expand...
Click to collapse
Take your chances and trim a micro SIM to nano size but I'll wager you'll have issues and have to get a proper nano SIM anyway. The correct SIM shouldn't cost you anything from your carrier if you're paying for cell service on their network. Why complicate it?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE

Categories

Resources