Database Info

Replaced just the glass, saved the digi/lcd (With video)

Well I read a lot of places that it couldn't be done. I have successfully replaced just the glass. I recorded it on my Gopro so everyone can see how its done. If you find it useful hit the thanks Make sure you spread this around so people stop buying 300 dollar full LCD assemblies.
without further adieu
http://www.youtube.com/watch?v=W4Gx5fLy0NQ&feature=youtu.be

That's impressive. Props to you for not listening to everyone else did you do any damage to the outside rim around the display? It looks like you hacked it up with the knife in the beginning getting off the old display.
Excellent work. This video is a keeper.

mustbepbs said:
That's impressive. Props to you for not listening to everyone else did you do any damage to the outside rim around the display? It looks like you hacked it up with the knife in the beginning getting off the old display.
Excellent work. This video is a keeper.
Click to expand...
Click to collapse
I used an area that already had some scuffs from a drop. No noticeable damage.

Good work man! It's individuals like you who push us forward and reveal new options.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

this thread should get stickied all across versions of s3

There is a thread in one of the other forums about this http://forum.xda-developers.com/showthread.php?t=1890708&page=11
but yeah this helps all S3 owners
---------- Post added at 10:57 PM ---------- Previous post was at 10:36 PM ----------
But yeah very good job dude. Mine cracked at the bottom corner https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/386262_10151093476528557_832449593_n.jpg
I ended up throwing a tempered glass screen protector on it, and its not too bad
http://i50.tinypic.com/34orkpk.jpg
http://i46.tinypic.com/e7koat.jpg
I dont know if it would be worth changing out for me right now, or just rock it til I break it lol

hypertek said:
There is a thread in one of the other forums about this http://forum.xda-developers.com/showthread.php?t=1890708&page=11
but yeah this helps all S3 owners
---------- Post added at 10:57 PM ---------- Previous post was at 10:36 PM ----------
But yeah very good job dude. Mine cracked at the bottom corner https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/386262_10151093476528557_832449593_n.jpg
I ended up throwing a tempered glass screen protector on it, and its not too bad
http://i50.tinypic.com/34orkpk.jpg
http://i46.tinypic.com/e7koat.jpg
I dont know if it would be worth changing out for me right now, or just rock it til I break it lol
Click to expand...
Click to collapse
I wouldn't lol

kobz1973 said:
this thread should get stickied all across versions of s3
Click to expand...
Click to collapse
Agreed

I love the fact that you had a beer sitting next to you in the video. Awesome!

mamba94 said:
I love the fact that you had a beer sitting next to you in the video. Awesome!
Click to expand...
Click to collapse
Had to have a decent buzz before I had the courage hah

Nice and straight to the point. The glass doesn't contain the digitizer, right? It also doesn't need to be glued to the actual oled itself? Isn't the glue between the glass and the oled causing the dark blotches? The oled should be plastic so you should be able to clean it with a light solvent before putting the new glass on. Sorry for so many questions. I haven't cracked mine but its nice to know it can be fixed cheap.

Imatoasta said:
Nice and straight to the point. The glass doesn't contain the digitizer, right? It also doesn't need to be glued to the actual oled itself? Isn't the glue between the glass and the oled causing the dark blotches? The oled should be plastic so you should be able to clean it with a light solvent before putting the new glass on. Sorry for so many questions. I haven't cracked mine but its nice to know it can be fixed cheap.
Click to expand...
Click to collapse
I have no dark blotches. My screen i would say looks 99% factory. I dont know iy I should have added extra adhesive. If my screen falls off I will be sure to mention it. I tryed prying up on it after it cooled and it seems the old glue is sticking very welll:good:

received an email today from amazon saying the seller could no longer supply my item .... i placed the order last bloody friday ...
so i have had to re-order my front screen ....
more waiting ... im getting impatient as my screen looks like this

YellowGTO said:
I have no dark blotches. My screen i would say looks 99% factory. I dont know iy I should have added extra adhesive. If my screen falls off I will be sure to mention it. I tryed prying up on it after it cooled and it seems the old glue is sticking very welll:good:
Click to expand...
Click to collapse
Idk if you saw the threads about the dark blotches when viewing a black image at night. They show up on every phone from the factory. I thought that after your method that a side effect would be those would be gone. This makes me worry less about getting a case

Imatoasta said:
Idk if you saw the threads about the dark blotches when viewing a black image at night. They show up on every phone from the factory. I thought that after your method that a side effect would be those would be gone. This makes me worry less about getting a case
Click to expand...
Click to collapse
I will have to check about these darkspots at night. Ive never noticed this, even before my phone screen smashed

YellowGTO said:
Had to have a decent buzz before I had the courage hah
Click to expand...
Click to collapse
Thanks for taking the time to post this! very cool

Does the screen come with the required adhesive to stick to the bezel? if not can anyone post what kind of adhesive they use replace the screen.

dlx509 said:
Does the screen come with the required adhesive to stick to the bezel? if not can anyone post what kind of adhesive they use replace the screen.
Click to expand...
Click to collapse
Depending where you get your glass from, i believe some do come with 3M tape cut into the correct shapes ...
the OP did not use anything just the glue that was left there ...

kobz1973 said:
Depending where you get your glass from, i believe some do come with 3M tape cut into the correct shapes ...
the OP did not use anything just the glue that was left there ...
Click to expand...
Click to collapse
This is correct. I just reheated the old glue backup. So far its been jiggled around it my GFs purse for the last 3 days. Its still holding

Cases

http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.

km8j said:
http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.
Click to expand...
Click to collapse
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.

sabbotage said:
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.
Click to expand...
Click to collapse
yea i dont mind either the smooth or sand. these are just the only tolerable cases because they are slim and don't make the phones even bigger

I have a hard time not buying a case from rearth. I freaking love their cases, just ordered mine from there.

km8j said:
yea i dont mind either the smooth or sand. these are just the only tolerable cases because they are slim and don't make the phones even bigger
Click to expand...
Click to collapse
I messaged bear motion on Facebook and they said they will be producing cases for the new moto X but they have no ETA at the moment.

Does rearth have one that is like the slim bear motion

I ordered this case and, while I don't normally use cases, I'm very happy with it. I won't have the phone to go with it for a while, but my old Droid DNA fits in it and I can tell that I wouldn't have a problem using the new X with a case on 24/7...really nice feeling, I think it's the curves.
http://www.amazon.com/gp/product/B00ETOEXFG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I also ordered this one too, just in case (for $8 or whatever it's no biggie)..
http://www.amazon.com/gp/product/B00N34V748/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

MYxdaUSERNAME said:
I ordered this case and, while I don't normally use cases, I'm very happy with it. I won't have the phone to go with it for a while, but my old Droid DNA fits in it and I can tell that I wouldn't have a problem using the new X with a case on 24/7...really nice feeling, I think it's the curves.
http://www.amazon.com/gp/product/B00ETOEXFG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I also ordered this one too, just in case (for $8 or whatever it's no biggie)..
http://www.amazon.com/gp/product/B00N34V748/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I ordered the case from your first link too. For only 10 bucks I figured it would hold me over until the bear motion snap on cases come out. My case will be here tomorrow but who knows when the phone will arrive.

I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
These all make these giant phones even more giant - so unwieldy

GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
Given the shape of the Moto X, will a bumper case sufficiently protect the back of the phone, specifically the center? I like the idea of that bumper case, I'm just worried that since the phone tapers around the edges that the fat part of the phone in the middle will be susceptible to scratches and since I'm planning on a wood back that's a no go.

cbsevenfifty said:
Given the shape of the Moto X, will a bumper case sufficiently protect the back of the phone, specifically the center? I like the idea of that bumper case, I'm just worried that since the phone tapers around the edges that the fat part of the phone in the middle will be susceptible to scratches and since I'm planning on a wood back that's a no go.
Click to expand...
Click to collapse
it looks thick enough that it'll raise the phone just a tad bit. i usually lay my phone face down, to protect the display. i am hoping the bumper gives enough lift so the front speaker grills don't get scratched
---------- Post added at 09:17 PM ---------- Previous post was at 09:16 PM ----------
GatorsUF said:
I like the motomaker bumper case, protects the edges but shows the design of your phone. Hopefully some aftermarket companies will start making bumper cases for a better price.
Click to expand...
Click to collapse
for the price, it doesn't look too bad. i ordered one myself
km8j said:
These all make these giant phones even more giant - so unwieldy
Click to expand...
Click to collapse
not really. i had a bumper case for my n4, and that did not add much bulk to it. it actually felt good in the hand. i could be totally wrong with this phone though

sabbotage said:
I'm actually waiting for the bear motion sand textured cases. I hope they make them for the new phone. I was hoping to snag one before my phone gets here.
Click to expand...
Click to collapse
^^^ This ^^^
The bear motion cases add very little bulk to the devices and seem to protect the edges very nicely (at least they did on the Gen 1). Hopefully they will offer a 2014 model.

This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/

km8j said:
This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/
Click to expand...
Click to collapse
That looks to be a nillkin case....

The bumper is good. I have it on right now. Yes, it makes it a little thicker, but all cases do. So it'll be the same as having a full body case on
sent from my Moto X (2014)

km8j said:
http://www.amazon.com/gp/aw/d/B00EOHO9DE
Anyone able to find anything like this? Is the only case tolerable in size.
Click to expand...
Click to collapse
Looks like the bear motion cases are in stock now. I just ordered the black, blue and grey versions and it looks like I got the last one of each. It shows back in stock on Oct. 2nd though
Link: http://goo.gl/8ztILB

sabbotage said:
Looks like the bear motion cases are in stock now. I just ordered the black, blue and grey versions and it looks like I got the last one of each. It shows back in stock on Oct. 2nd though
Link: http://goo.gl/8ztILB
Click to expand...
Click to collapse
Ugh, again they cover the dimple. The original was probably the best case I've ever used, but how the hell do they decide to cover the dimple? I actually like the one on the 2nd gen more than the first.
edit: interestingly enough, the back of the phone isn't right in those pics on amazon. the flash isn't correct. here's hoping there's a chance they do have a cutout, even if i doubt it.

mohlsen8 said:
Ugh, again they cover the dimple. The original was probably the best case I've ever used, but how the hell do they decide to cover the dimple? I actually like the one on the 2nd gen more than the first.
edit: interestingly enough, the back of the phone isn't right in those pics on amazon. the flash isn't correct. here's hoping there's a chance they do have a cutout, even if i doubt it.
Click to expand...
Click to collapse
Yeah I'm not sure what phone that is in the photos. It's not even the 1st gen moto X because I have several of those cases and they look nothing like that. I don't mind that they cover the dimple, but to each his own.

I have ReD trims but item is not available until end of october
http://www.amazon.com/gp/product/B00NYXRPO4/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3RZJ9YYQ3ASDK
for now I will use http://www.amazon.com/gp/product/B00LZBJWHK/ref=gno_cart_title_0?ie=UTF8&psc=1&smid=A1OK9R8S7S5URY
---------- Post added at 01:10 AM ---------- Previous post was at 01:08 AM ----------
I dont like when case doesnt cover the edges
km8j said:
This is appealing... http://www.amazon.com/Acetech-Quality-Motorola-Generation-Protector/dp/B00MWKT4IU/
Click to expand...
Click to collapse

Toastmade wood skins Nexus 6P

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.toastmade.com/products/nexus-6p.html

Looks really cool, but I'd be afraid of tiny little splinters...

I dig it. Wonder how grippy it is.

I have oedered this combo, when it aerives i will upload some pictures.

With all those curves, etc it looks like installation would be very difficult.
Certainly looks beautiful, though.

Wow that looks sexy. Curious if it makes the phone slippery.

Th3PorTuGa said:
http://www.toastmade.com/products/nexus-6p.html
Click to expand...
Click to collapse
@LAURCORE
You know, I was interested in this until you spammed every thread you could find with of topic posts with links. Now I'm just annoyed and won't be buying your product. Forum rules are here. http://forum.xda-developers.com/announcement.php?a=81. Read them.

p2im0 said:
Looks really cool, but I'd be afraid of tiny little splinters...
Click to expand...
Click to collapse
Toast is laser cut and handcrafted from sustainably grown, North American hardwoods. Every cover is sanded, beveled and treated to 3 coats of a hand rubbed finish. Rest assured, they are splinterproof.
---------- Post added at 07:55 PM ---------- Previous post was at 07:53 PM ----------
jeebuspwnz said:
I dig it. Wonder how grippy it is.
Click to expand...
Click to collapse
Our woods our super grippy, especially with the scorelines we laser etch into the edges, enabling the wood to fully wrap the device.
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
NateK said:
With all those curves, etc it looks like installation would be very difficult.
Certainly looks beautiful, though.
Click to expand...
Click to collapse
Installation is easy. We even offer a "butterfingers" replacement if you mess it up.... that's how rare it happens. We'll have an install video for the 6P up by the weekend, so stay tuned.
---------- Post added at 08:01 PM ---------- Previous post was at 07:58 PM ----------
sesz said:
Wow that looks sexy. Curious if it makes the phone slippery.
Click to expand...
Click to collapse
Quite the contrary; Toast adds much needed grip, especially with the scorelines we laser etch into the edges, enabling the wood to fully wrap the device.
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
Elnrik said:
@LAURCORE
You know, I was interested in this until you spammed every thread you could find with of topic posts with links. Now I'm just annoyed and won't be buying your product. Forum rules are here. http://forum.xda-developers.com/announcement.php?a=81. Read them.
Click to expand...
Click to collapse
My apologies, as I did not realize I was spamming. I only wrote in two threads that were not Toast related, as there were people looking for real wood covers and I was trying to enlighten them. Thanks for enlightening me on the rules!

Looks quite wicked, bit steep though, shame no discount for XDA members
Sent from my Nexus 6P using Tapatalk

ricey1986 said:
Looks quite wicked, bit steep though, shame no discount for XDA members
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Wish I could hook it up, but we're pretty tight on discounts due to the lack of profit margin on our product. We do not outsource and there's a lot that go into these bad boys.

LAURCORE said:
Wish I could hook it up, but we're pretty tight on discounts due to the lack of profit margin on our product. We do not outsource and there's a lot that go into these bad boys.
Click to expand...
Click to collapse
Totally understand maybe a post Xmas purchase [emoji2] [emoji2]
Sent from my Nexus 6P using Tapatalk

I like the look of this. How good is the protection with both the back and front piece? How does the back and front piece stay connected when the phone is inserted? Just saw install video.

It is a skin. I had one on my nexus 6 and where the little cuts are on the corners started peeling up. It made the skin have a little edge that got caught on my clothes. I ended up peeling it all off and going with a wood Dbrand skin

Wow, looks great! I want to have that for my phone too <3
I wonder how stable it is, since the cover is made of thin wood.

I am looking at the bamboo ebony combo, and would like a vertical "nexus" etched in it in the same location and with the same font as on the phone itself. Is that possible?
If so, I definitely think that I'll pull the trigger. Should look slicker than my metal dBrand.

I want the leather!!!!! Although that dark wood/light camera visor looks nice!

Just saw the installation video, please note that your screen skin covers the proximity sensor.

Also covers the notification light

fatpeopleunite said:
Also covers the notification light
Click to expand...
Click to collapse
Doesn't look like it does.
---------- Post added at 11:12 PM ---------- Previous post was at 11:12 PM ----------
Damn, that bamboo with walnut inlay combo (back only) looks great. I may be ordering one next week...

$34 for a pice of paper. These sellers gotta be crazy sick lmao

Any recommendations for a good case ?

Hi guys, I bought a local case for my Moto X Play and its made of hard rubber. It feels very solid but the buttons are too rigid. So I am looking to change to a new one.
I would probably buy something from Flipkart or Amazon.in because C-O-D is easiest for me and was wondering if you guys could give me some recommendations.
The phone's pretty big as is and I don't want too bulky a case but something with nice cutouts, since I got a Tronsmart Quick Charger with its bigger micro-usb plug.
I broke my S4 by dropping it so something with a bit of protection would not go amiss however.
Hope for some nice suggestions, budget around ₹500, maybe stretch a little bit above.

My Diztronic TPU is very satisfactory and has correctly sized cutouts for cables and whatnot. Depends on how much protection you're looking for.
This cost about ₹1,000 in the UK, not sure what the price would be elsewhere.

Thanks for responding. I checked it out and its there on Amazon India. Looks to be a nice case, guessing you went for the black edition of the case? Do you have the white MXP or the black one? I have the black one myself.

halui said:
Thanks for responding. I checked it out and its there on Amazon India. Looks to be a nice case, guessing you went for the black edition of the case? Do you have the white MXP or the black one? I have the black one myself.
Click to expand...
Click to collapse
Yeah, I went with the black version of the case and a generally dark theme in Moto Maker when I bought the phone itself. Darker colours tend to be more versatile and show their age less immediately than lighter colours, I find.

Chaotic-Entropy said:
My Diztronic TPU is very satisfactory ... ... ...
Click to expand...
Click to collapse
Perhaps I ought to know from "TPU." but, is the back of the case a soft feel or hard?
The back of the X Play has a good feel and is easy to grip. I made the mistake of buying a flip case with a hard shell, which is neither.
halui, thanks for pointing out that it is available on Amazon.in

anyone knows where to get rubber case, not TPU real rubber? I have searched many places but didn't get.

bablu048 said:
anyone knows where to get rubber case, not TPU real rubber? I have searched many places but didn't get.
Click to expand...
Click to collapse
I got mine from the local street seller for about ₹100 and it definitely feels like real rubber. The power and volume buttons are pretty stiff and not easily press able though.

halui said:
I got mine from the local street seller for about ₹100 and it definitely feels like real rubber. The power and volume buttons are pretty stiff and not easily press able though.
Click to expand...
Click to collapse
sorry, i meant soft rubber.
can you upload pics of it ??

bablu048 said:
sorry, i meant soft rubber.
can you upload pics of it ??
Click to expand...
Click to collapse
Sure, here are some pics I took with my MXP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

halui said:
I got mine from the local street seller for about ₹100 and it definitely feels like real rubber. The power and volume buttons are pretty stiff and not easily press able though.
Click to expand...
Click to collapse
Really? I can't say that I've found the buttons much of an issue on the case, but maybe I just have the finger strength to ignore it.

halui said:
Sure, here are some pics I took with my MXP.
Click to expand...
Click to collapse
I have one exactly like that only totally transparent and slots for volume and power buttons.

Chaotic-Entropy said:
Really? I can't say that I've found the buttons much of an issue on the case, but maybe I just have the finger strength to ignore it.
Click to expand...
Click to collapse
I had a TPU case for my Galaxy S4 and it had very soft buttons so I am sure your case won't be an issue either. This is a local case though, rubberised plastic and has stiff buttons.
bablu048 said:
I have one exactly like that only totally transparent and slots for volume and power buttons.
Click to expand...
Click to collapse
Yeah I saw some of them, maybe I should have gone for something like that.

Chaotic-Entropy said:
My Diztronic TPU is very satisfactory and has correctly sized cutouts for cables and whatnot. Depends on how much protection you're looking for.
This cost about ₹1,000 in the UK, not sure what the price would be elsewhere.
Click to expand...
Click to collapse
I'm really stupid. I got it into my head that this was a flip cover, because that is what I want. Of course it isn't, and the product page shows that as clearly as showing that it isn't an elephant! doh!
Anyway, looks like the seller will kindly accept the return, even though the reason is customer stupidity.
Does anyone know a good flip case made from this kind of material.
For anyone who knows the Mi stuff, what I want is something like the Mi smart-flip for my flood-destroyed m4i. That was just perfect...

My moto flip case don't give me any trouble and wasn't that expensive.
---------- Post added at 11:17 PM ---------- Previous post was at 11:11 PM ----------
Do you use screen protectors? Used these rubber cases and always end with scratches on my screen with older phones after some months.

Cruzerlite http://www.cruzerlite.com/bugdroid-circuit-case-for-the-motorola-moto-x-play-2015-3rd-generation

http://www.amazon.ca/Incipio-DualPr...453479437&sr=8-2&keywords=incipio+moto+x+play
Really great case.

Thad E Ginathom said:
I'm really stupid. I got it into my head that this was a flip cover, because that is what I want. Of course it isn't, and the product page shows that as clearly as showing that it isn't an elephant! doh!
Anyway, looks like the seller will kindly accept the return, even though the reason is customer stupidity.
Does anyone know a good flip case made from this kind of material.
For anyone who knows the Mi stuff, what I want is something like the Mi smart-flip for my flood-destroyed m4i. That was just perfect...
Click to expand...
Click to collapse
Oh right, woops, nice that the seller was good about it.

Chaotic-Entropy said:
Oh right, woops, nice that the seller was good about it.
Click to expand...
Click to collapse
Yes, they approved the return and put through the refund promptly. Five-star service!

http://www.flipkart.com/chevron-sho...accessory_casescovers_1&ppid=ACCEB6D5KA2AZGG6
The best out of all - fully protected - best buttons - impressive hard look check it
different colors as per your choice - i chosed royal blue and it is awesome

What sticker/skin/wrap around is best for LG G5?

Hi guys, I would like to know what is the best skin for the G5 that also covers the side? I checked dbrand and it seems they only have front and back skins. Is there a high quality phone skin manufacturer that also covers the side area of the G5?
Thanks in advance for any replies.

i have a vinyl plotter so i can make you a custom one.I've slowly been working on making my own for my phone.

I bought one from slickwraps as I usually do when I order skins (usually because I have a discount code from previous orders).
I've always found them to be great quality and perfect fit on all devices I've tried.
Ill upload pics when I get it (hopefully tomorrow)
Sent from my LG-H850 using Tapatalk
---------- Post added at 10:37 PM ---------- Previous post was at 10:36 PM ----------
sharpknight said:
i have a vinyl plotter so i can make you a custom one.I've slowly been working on making my own for my phone.
Click to expand...
Click to collapse
How much would you charge for a custom one, if be very interested in one. I love the shape and feel of the phone so I prefer skins over cases. And a custom option would be sick
Sent from my LG-H850 using Tapatalk

Roshi69 said:
I bought one from slickwraps as I usually do when I order skins (usually because I have a discount code from previous orders).
I've always found them to be great quality and perfect fit on all devices I've tried.
Ill upload pics when I get it (hopefully tomorrow)
Sent from my LG-H850 using Tapatalk
---------- Post added at 10:37 PM ---------- Previous post was at 10:36 PM ----------
How much would you charge for a custom one, if be very interested in one. I love the shape and feel of the phone so I prefer skins over cases. And a custom option would be sick
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
IDK, like $5-10? i'm not trying to compete with Dbrand here lol, was just designing one for myself anyways.
What color are you looking for? i'm currently using matte black for mine.

Roshi69 said:
I bought one from slickwraps as I usually do when I order skins (usually because I have a discount code from previous orders).
I've always found them to be great quality and perfect fit on all devices I've tried.
Ill upload pics when I get it (hopefully tomorrow)
Sent from my LG-H850 using Tapatalk
---------- Post added at 10:37 PM ---------- Previous post was at 10:36 PM ----------
How much would you charge for a custom one, if be very interested in one. I love the shape and feel of the phone so I prefer skins over cases. And a custom option would be sick
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Thank You!

slickwraps said:
Thank You!
Click to expand...
Click to collapse
Haha no problem. Hopefully mine will arrive today and I'll get some pics up later

Hi all. My Slickwraps arrived today and I've attached a good few pics. As usual it is a perfect fit all round and simple enough to apply (always use a hairdryer on curved surfaces to 'shrink' the material into the curve).
Just want to state that I am not affiliated with Slickwraps in any way, nor have I been asked to review. I am simply a happy customer of a few years and want to share my experiences.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

better use a case , my phone screen cracked

Roshi69 said:
Hi all. My Slickwraps arrived today and I've attached a good few pics. As usual it is a perfect fit all round and simple enough to apply (always use a hairdryer on curved surfaces to 'shrink' the material into the curve).
Just want to state that I am not affiliated with Slickwraps in any way, nor have I been asked to review. I am simply a happy customer of a few years and want to share my experiences.
Click to expand...
Click to collapse
Looks awesome. Thank You!

Im seeking for a black piano sticker for the front bottom of the phone... Just to cover that LG logo area.
Enviado de meu LG-H860 usando Tapatalk

Dbrand has always been my go-to option and they've been perfectly cut, but seeing that Slickwraps skin, I'll be giving that a go for sure since that also covers the sides.

Skinit has some good skins as well

I got from Xtremeskins, Dark Oak
it's only £5 (+£2 for additional accents) and free shipping if you are in the UK!
You even get spares for the borders' stickers!
The fit is almost perfect, the back skin leaves a little naked metal wear the chin separates, but i'm ok with it! (I didn't want to stretch neither...)
It looks like a metal band separating the main body and the chin.
Using a spigen clear hybrid case on, the fit is very tight, sadly a bit of the right side skin got a bit peeled (it's okay since i have spares hehe)...
but all in all, super satisfied, quite realistic wood appearance and texture.
Was hesitating between Dark oak and Walnut, I'd love to have the Walnut skin too haha.
Will post more photos later today.

I ordered black leather from xtremeskins as well, to go with my case but the skin that goes around the camera lens blocked the wide angle camera on the edges. Did you try it? Did you get the same result?

Is there any skin for Cam Plus module?

raynan said:
Dbrand has always been my go-to option and they've been perfectly cut, but seeing that Slickwraps skin, I'll be giving that a go for sure since that also covers the sides.
Click to expand...
Click to collapse
We're seeing a huge influx of their customers lately.

Anyone have problems with wide camera after applied skin camera stick?Look top left and bottom corner...I have this skin.

Anyone know know where I can get sinks in my geo area - either from UK or Ireland, I don't want to wait weeks for it to come from the US.
edit: If I actually read the post 2 posts back I would have gotten my answer !