Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
Earlier today, I got an error upon starting up my Samsung Galaxy S5 (T-Mobile) that says "Unfortunately, System UI has stopped." My background has been turned to black and none of the buttons work properly. The phone IS rooted (and has been for about a week), but runs on stock OS (5.0 Lollipop) and stock recovery. I have never flashed a rom on this phone. I already tried restoring from a Titanium Backup I made yesterday before this error ever showed up, but it did nothing. Perhaps it's relevant that this error first happened after I booted the phone in recovery mode (to see what stock recovery looked like), then selected "reboot phone." I also already tried wiping the cache partition, wiping the System UI cache, and rebooting is Safe Mode. None of these worked. I thought unrooting the phone might help, but I accidentally uninstalled SuperSU without removing the root. With the System UI down, I can't install any apps at all, such as SuperSU again or a file explorer that would allow me to remove the "su" folder in /system/bin/. Now I have no way of unrooting, short of wiping the phone. I DO NOT want to do that. How do I get my phone back to normal?
--EDIT-- I finally gave in and did the factory reset. I rooted it again using the same method as before (in order to use Titanium Backup), and just to see what would happen I went to recovery mode. Sure enough, I was greeted with the same error as before. I had already rebooted the phone normally multiple times before trying to use recovery mode, so I have no doubt that the stock recovery mode is the cause of these issues.
Signal2Noise said:
Personally, I don't like Titanium Backup. I seem to be in the minority with that opinion, but it's given me issues in the past. Try flashing a non-stock recovery like TWRP for your S5 and either wiping your phone or wiping and flashing another ROM.
Samsung phones seem to dislike rooted users for some reason
Click to expand...
Click to collapse
Too late, I already wiped the phone. I re-rooted using Chainfire's auto-root, then flashed CWM so that stock recovery doesn't screw me over again. Before restoring from the backup, I booted into CWM recovery and restarted the phone. No error. I hope it stays that way, this whole thing is a huge hassle. There really needs to be a disclaimer with Chainfire's auto-root telling people to get rid of stock recovery!
Hi there
You'd be best served asking for help from the experts who own your device, here:
T-Mobile Galaxy S 5 Q&A, Help & Troubleshooting
Good luck
Hello to everyone, posting this here as I don't have access to ask in the forum post for BlissPop - I.E fresh user
I'm having issues with my "recalled" shield tablet (wifi), I had it flashed to BlissPop successfully previously but when I tried reflashing it the other day I was met with a major roadbump: It just won't load the ROM.
The tablet freezes at the screen following the installing and optimization of each application - basically my screen is stuck at a small wall of text saying the following:
"BlissPop is starting...
Powered by Team Bliss
Starting apps.
Please wait for the optimization process to finish."
And before you ask, yes I have waited long enough (left it on through the night just to be sure - this thing won't load).
My procedure is as follows.
Bootloader is CWM and it is rooted beforehand.
1st off going into recovery mode.
#2 Wipe data/cache/dalvik cache - done
#3 Installed BlissPop via sideload, then gapps_pico afterwards (I've tried wiping cache+dalvik before installing gapps to no help.)
#4 Rebooting from CWM, here I've tried both allowing and denying CWM to "fix" root settings.
I've tried the first ROM I installed (when wifi/lte versions were available) and the newer releases - same problem with both.
After this I am met with this screen that won't budge, anyone got a possible solution to this issue?
Hey I just received my replacement tablet and was going through this process too. I did some digging around and found / remembered that having an external SD card socketed can cause this problem. So I powered my device off, removed the card and then rebooted without major issue.
Hope this helps.
I don't have any SD card in my tablet though, thanks anyways.
Did you format system?
If not then do format system/data/cache
Sent from my P4S using Tapatalk
Tried doing a format of system as well as data/cache/dalvik, still getting same result :/
Not sure its still helpful or not...i saw the xda thread regarding to this thread and whoever tried to flash the last zip got stuck at boot. So I'm guessing if you will flash a different one (by this time maybe they upload a new one) maybe you could get rid of it..
Sent from my P4S using Tapatalk
When I switched to BlissPop I had to format /data because TWRP was unable to wipe it. TWRP offers that option unter "advanced wipe". Might be the same with CWM.
any help my phone stuck on this boot loop and i dont know what to do now , any fix ? i dont wanna have broken phone i did everything that u guys said nothing works
Hello, I need serious help with my phone.
So, after a long while of having my phone rooted, and had a case of boot loop with twrp, I decided to go back to stock os and hung up the root days. I thought i did it right by getting a stock os and flashed it, and it worked for couple months, until yesterday.
My phone keeps going into Cyanogen Recovery, I tried rebooting so many times, once it did boot up to OS, but it went back after i restarted phone or it died.
Now I can't no longer get back, I thought factory resetting will work but it didn't. (Tried both wipe cache partition and Full factory reset option from the recovery) I found unroot your phone toolkits, thinking it could help fix my problem and just unroot/ give me back to OS (I wished i found this before flashing that custom stock rom).
But the toolkit doesn't work for me, it finds adb devices, but it cant find fast boot devices, because my phone cant even go into fast boot.
I tried manual, and the option from the recovery, it keeps going back to recovery. I have an option for apply update, and then apply from ADB, that was the only way for my pc to recognize my phone from adb devices. Any clues on how to fix?
Hi !
I may suggest you this thread https://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Good luck !
xanthrax said:
Hi !
I may suggest you this thread https://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Good luck !
Click to expand...
Click to collapse
Will try, Ill respond back if anything happens!
Hmm I'm still having trouble because, I can't get into fast boot for some reason. It's keep going back to Cyanogen recovery. It has the option to reload into bootloader, but goes into cyanogen recovery again.
There is an option in dev options, uncheck the "update cyanogen recovery" and flash twrp again
Sent from my SHIELD Tablet using Tapatalk
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
I'm still stuck in this situation...
Any help plz?
IYaWonaRoo said:
I've been stressed out lately about trying to root my Samsung Galaxy J3 Emerge.
I got TWRP 3.1.0-0 and went on install but the supersu 2.82 zip file wasn't showing so I tried to fix it.
First I tried Format Data and that didn't work, then I tried Changing File System for System, Data, and Cache one by one and that seemed to have worked. The supersu file showed and I installed it.
Then I Rebooted System and it said,"No OS Installed! Are you sure you wish to reboot?" and this has happened to me before so I figured it would reboot back into TWRP and I would have to boot to download mode, and install the firmware through Odin, but that didn't happen, what happened instead was when I Rebooted System, on the top right it said,"kernal is not seandroid enforcing, set warrenty bit:kernal" and would keep bootlooping, I went back into TWRP by taking the battery out and putting it back in then holding power, home, and volume up and I was back in TWRP.
The thing is it would keep doing this and I'm kinda stuck right now tbh. I already tried Formatting Data, Flashing a ROM, and installing the SM-J327P Firmware, but nothing worked. I'm guessing the only way to fix this is by changing back to my original File Systems and then installing the Firmware through Odin, but I'm stupid and don't remember the original File Systems. So if any of you could tell me the default File System for System, Data, and Cache or another way to fix this that would be great. Thanks
Click to expand...
Click to collapse
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
savagevegeta said:
You have to use the getprop command to get your software number. Then you have to restore that EXACT software. You might have probably updated unknowingly, and the bootloader updated too. So restoring to an older firmware might bootloop. It was a huge pain in the butt to get mines working after this issue but I got it right after a few tries. I flashed the custom J327p rom they made for it, factory reset and just waited until it booted. Was a long time but after trying every restore and refreshing, I got it working. There's the newest firmware out (idk the name since I just have the metro version of this phone now) but only that one will get the phone running. If you ever do get it running, root with magisk as this phone is VERY sensitive to SU and won't work half the time
Click to expand...
Click to collapse
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
IYaWonaRoo said:
Thanks for the reply but I have tried restoring with a firmware with my exact software number, model, version, changelist, build date, country/carrier(sprint), and security patch level and I did a format data, yet It didn't work... As far as I know, the bootloop was not caused by the firmware, it was caused by me manually changing the Partitions' File Systems, however I do not remember the original File Systems for the partitions. In case this madders, the way I changed it was by pressing "Wipe" in TWRP, then "Advanced Wipe", then selecting "System", then "Repair or Change File System", then "Change File System", and choosing a random button. I also selected "Data" and "Cache" but I did it individually, one at a time.
Click to expand...
Click to collapse
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
savagevegeta said:
That's a tough one. I've never touched those options in TWRP. Have you used Odin to completely wipe the phone from everything including TWRP and flashing stock?
Click to expand...
Click to collapse
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
IYaWonaRoo said:
I do have a brother that has the EXACT same phone as me so I tried installing TWRP on his phone and checking the original File Systems, however TWRP doesn't install on his phone for some reason. I enabled developer options, USB debugging, OEM, and installed the drivers and when I install TWRP recovery on his phone through odin it says it was successful but for some reason when I boot into the bootloader it's the regular one that comes with the phone and not TWRP. I'm guessing this is because he has low storage (95% used up). But he doesn't cooperate with me and says he doesn't want the TWRP on his phone because virus blah blah idk (and I don't know how to remove it without factory reset, which he doesn't want to do even though he can backup his stuff) also doesn't want to delete or free up storage from his phone. So I'm going to try wiping my phone through odin i guess...
Click to expand...
Click to collapse
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
savagevegeta said:
Storage space has nothing to do with flashing recoveries because they have their own partition. I suggest you flash the same TWRP you used on his phone, then as soon as it finishes flashing, boot into recovery IMMEDIATELY by pressing volume up, power, and home. do NOT let the device boot. If you screw up and it gets to the Samsung animation, flash again and try again. This is because some of the latest Android devices tend to restore recovery upon boot for some reason. Through my experience, anyways. Try this and let me know your results.
Click to expand...
Click to collapse
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
IYaWonaRoo said:
Ok. It worked and my phone is back, the problem is now my brothers phone keeps popping up a message on his home screen saying, "Unfortunately, TouchWiz home has stopped.", and "Unfortunately, Google Services Framework has stopped", and other messages over and over and he can't do anything after installing TWRP. I've tried rebooting, and force stopping and clearing cache of Google Services and TouchWiz but nothing worked
Click to expand...
Click to collapse
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
savagevegeta said:
You have to factory reset. I don't know how you're gonna do it but that's the only way to get out of it otherwise you might have been doing something else other than installing TWRP and broke something. I suggest you restore to stock and try again. If you didn't make a back up, you might be bricked unless you flash the stock firmware with a computer
Click to expand...
Click to collapse
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
IYaWonaRoo said:
Thank you so much for your help! My phone is back and luckily my brother had a backup so we fixed his phone and I rooted with Magisk which apparently I needed a micro SD card because my internal storage showed as 0mb and tried everything to fix it ,which is why I was in this mess in the first place, then I finally decided to buy an SD card and it worked!
Click to expand...
Click to collapse
The steps to fix storage 0mb are clearly posted in the TWRP thread.
ashyx said:
The steps to fix storage 0mb are clearly posted in the TWRP thread.
Click to expand...
Click to collapse
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
IYaWonaRoo said:
I have tried manually mounting, format data, wiping system, cache, and data one by one, changing the File Systems one by one, and alot more. NOTHING WORKED. However every youtube video that I have seen about rooting my exact phone with twrp, all had and used micro SD cards! I tried avoiding buying one but every time I try to fix it any other way it ends up either not doing anything or screwing up my device. Once savagevegeta helped me out of the mess I caused by trying to fix the 0mb I decided screw it, no other method worked so might as well try buying a SD card, and guess what happened, IT WORKED! And I realized why every single guide and yt video used micro SD cards for my model.
Click to expand...
Click to collapse
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
ashyx said:
I guarantee you're doing it incorrectly. See my TWRP thread for correct instructions to mount data.
Click to expand...
Click to collapse
I probably was doing it wrong lol. But its fixed now so dont worry
IYaWonaRoo said:
I probably was doing it wrong lol. But its fixed now so dont worry
Click to expand...
Click to collapse
Your data partition will still be unmountable and remain 0mb, which means you are unable to make a backup.
However if you're happy with it in that state...
Re: bootloop
have you tried grabbing the no verity/encrypt form the rooting forum, this solves seandroid problem