i never had this problem i could allways use odin and everything was ok after instaling new firmware and the phone got factory resets and was ok .
but now i tried 3 times to install a new firmware and the phone didnt change . no factory reset nothing .
any solution for this issue?
UP
Related
hello guys just wanna ask about my P3113 last night i was make some mistake about clicking the update on the notification bar and then the update do the process and it says failed because i turn it of the turn it on now my wifi stuck on turning on any idea guys?
p3113 wifi stuck turning on
i try to flash it via odin 1.85 and odin 3.04 with the flash file below
P3113UEBLH2_P3113XARBLH2_XAR
P3113UECLK7_P3113XARCLK7_XAR
i downloded it from the samobilefirmware but it also the same problem..
try to factory reset and cache on recovery but still the same..
khael16 said:
i try to flash it via odin 1.85 and odin 3.04 with the flash file below
P3113UEBLH2_P3113XARBLH2_XAR
P3113UECLK7_P3113XARCLK7_XAR
i downloded it from the samobilefirmware but it also the same problem..
try to factory reset and cache on recovery but still the same..
Click to expand...
Click to collapse
Try flashing older jellybean like 4.1.1 or else and then update to 4.1.2 from kies or from ur device
(all ROMs referenced in this post are stock from sammobile for the N915R4, which is the model of phone I'm working on)
Bought a Note Edge off the bay and proceeded to downgrade it to 4.4.4 (was running on 5.0 or 5.0.1). Tried to root via some idiot's forum post somewhere that used odin to flash CFAR then TWRP then install the SU binary or something like that.. obviously, bootloop. Factory reset produced the same results sooo.. reinstalled 4.4.4 via odin and the phone booted up just fine. (After that rootfail, any boot to recovery gets me the red ! android logo, which it had not up to that point.) Unfortunately, the menus and such weren't the farmiliar dark I was hoping they'd be (like they were on my old 4.2.2 s3 or the 4.4.2 s5) so after a little more research, I decided to upgrade back to 5.0.1 so I could root and install samsung's S6 theme engine. Downloaded OG1 instead of OC5 and for some reason halfway through it quit out on me, phone said interrupted; get on kies, and odin said FAIL. Well, crap. Rebooted into download mode and re-flashed this time thinking my usb cable had just come loose and this time it completed and odin said PASS. Phone rebooted and went through the "optomizing apps" bit.. then bootlooped. Booted into recovery and wiped data/factory reset. Bootlooped. Fack. Re-flashed 4.4.4 thinking I'd just forgotten to enable usb debugging that time and if I did in 4.4.4 after reflashing it, I could reflash 5.0.1 and it would be fine. re-flashed 4.4.4 successfully.. and managed to eliminate the bootloop.. instead it booted up and froze after the us cellular logo. wipe data/factory reset.. bootloop. shlt. :crying: re-flashed 4.4.4 again, bootloop, re-flashed 5.0.1 thinking the bootloader had gone retarded, wiped data/factory reset before even checking for bootloop, and... bootloop. downloaded OC5 thinking maybe the phone originally came to me with that version of 5.0 on it (so if I installed it it would work) and flashed that.. odin said Pass and phone got to/through the "optomizing apps" part again, then bootlooped. wiped data/factory reset.. bootloop. goddammit. :silly:
Right now I can boot into recovery and into download mode but other than that I'm stuck as to what to try next. Obviously wiping data / factory resetting does NOT fix my problem, and that's the only solution google gives me no matter how I phrase the question.
What Do, xda?
Dumbest. Fix. Ever. Downloaded Kies3 from Samsung. Opened Tools -> Emergency Firmware Recovery. Plugged phone in. Didn't see the phone. Booted phone into download mode. Didn't see the phone. battery pull and re-set up. Closed EFR, returning to Kies3 Home. Turned phone on. Bootlooped. Booted to phone setup screen. Phone is working again and running on 4.4.4.
So recently updated to 7.0 nougat version and did not like so i tried to flash a stock firmware which then soft bricked my phone , i got an error saying , error has occured use smart switch something like that, anywayz i was incapable of accessing the recovery mode ( i have stock recovery atm) but i could access the download mode , so luckly i had screen shot of my build number and baseband number using that i was able to find a stock firmware but the first time i tried i got an error caused by sboot.bin so then i saw some videos and apparently asked me to remove it from the stock firmware file and i did and i tried again AND NOW i get cm.bin error..... so now i remove that too after reading in a forum , so i tried again and this it worked ..... but D: ...... now it stuck on boot loop but i have now access to my stock recovery mode and atm downloading another stock firmware to try but this time i did wipe cache and factory reset but before i proceed i need advice on what to do now because i think theres a way to fix it now that i have access to the recovery mode maybe i need to add some custom recovery or something idk i need help. So far its been a hell of journey and im hoping it has a happy ending
I need help guys
I downloaded twrp the latest one and I wiped the vendor, after that it got bricked. I tried dload many different ROMs and it didnt work. I tried the SRK unbrick thing, it didnt work
I tried flashing old all ROMs possible nothing is working
I am getting the error
cust image mount failure, something like that.
Help me out please
Update: I flashed the B500 beta ROM and it worked, although it is still showing that it is B560 for some reason. Factory reset still fails, no app showing the software update
Hello, i have the SM-G9200ZH (Hong Kong version)
I disabled some system apps through pdp and got into a bootloop, after trying many things i did a factory reset and flashed through odin this firmware which is the latest
G9200ZHU2ERK2_G9200ZZH2ERK2_G9200ZHU2ERK2_HOME.tar the phone showed the bootanimation and then restarted to itself to bootlogo, over and over again.
So then i found a Pit file, and correct AP, BL, CSC, CP files for my device G9200ZHU2EQL1_G9200ZZH2EQL1_7.0, i flashed through odin selecting Nand Reset and Re-partition too.
At this point i still have the same issue, Phone goes into the bootanimation and then restarts itself over and over again.
The only way i have made the phone boot is by installing a custom ROM with TWRP, but i cant use any because it doesnt recognize the sim while using them.
Every time i flashed a firmware, When first booting i got a blue screen on the stock recovery that goes to 32% and then fails and says erasing.
Also im not using my Original Cable
So, can someone help me to make it work again? or to Tell me which custom rom actually works for my phone.
Did you try "wide /data" right after you've flashed the stock ROM?
forumber2 said:
Did you try "wide /data" right after you've flashed the stock ROM?
Click to expand...
Click to collapse
I did wipe data right after flashing through Odin, and also tried not wiping data after flashing through Odin. None of these worked, I don't know what to do
You can try flash twrp through odin then magisk/ supersu through twrp