Droid Maxx Bricked? - Motorola Droid Maxx

I have run into trouble using this method: https://www.youtube.com/watch?v=hb0jKB8OFko to flash stock firmware
My device: Droid Maxx
Bootloader locked, not rooted
4.4.4 at the start of the process
I downloaded the suggested firmware and ran into problems.
The first time I attempted it RSD appeared to flash everything except system.img which got hung up and the bootloader gave me a message in red stating: "no valid piv block in sp for system" This occured with the 1FF-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 software.
Figuring I had the incorrect firmware i tried two other roms: 1. CFC-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 and 2. 1FF-obake-maxx_verizon-user-4.4.4-SU6-7-release-keys.xml.zip 1.0.0. Both failed with a different error message. This time RSD and the bootloader told me "preflash validation failed for gpt".
I have tried this with RSD 6.1.5 and 6.2.4
My suspicion is that I don't have the correct firmware, but I could be wrong.
The bad news is that the phone will not boot into recovery or normally. The good news is that the phone WILL enter bootloader mode and RSD WILL recognize it.
Anyways any help would be greatly appreciated.
I posted an identical thread in the Ultra forum.

Related

[Q] ROM Flash Fail

Good Evening,
First please forgive my english if i make some mistakes...
Here is my problem :
i have a Orange RAZR HD, I flashed it into a SFR ICS ROM, then Jelly Bean OTA update, that worked perfectly.
I tried to get back to Orange ICS, and there came the problem.
During flashing, i had this failure message :
On RSD lite :
Failed flashing process. 2/22 flash partition "partition_signed"->Phone returned FAIL
On the Phone :
Device is unlocked, Status Code : 3
Batterie OK
Transfer Mode:
USB connected
Fastboot reason: Flash Failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
When i try to turn it off or on... it doesn't move...
black screen or "Fastboot reason: Flash Failure"
any ideas to help me fix this !!!
Thanks for taking time to read me and help.
Julien
esdobrad said:
Good Evening,
First please forgive my english if i make some mistakes...
Here is my problem :
i have a Orange RAZR HD, I flashed it into a SFR ICS ROM, then Jelly Bean OTA update, that worked perfectly.
I tried to get back to Orange ICS, and there came the problem.
During flashing, i had this failure message :
On RSD lite :
Failed flashing process. 2/22 flash partition "partition_signed"->Phone returned FAIL
On the Phone :
Device is unlocked, Status Code : 3
Batterie OK
Transfer Mode:
USB connected
Fastboot reason: Flash Failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
When i try to turn it off or on... it doesn't move...
black screen or "Fastboot reason: Flash Failure"
any ideas to help me fix this !!!
Thanks for taking time to read me and help.
Julien
Click to expand...
Click to collapse
this happened to me as well just now after I did a factory wipe and I was trying to restore my xt925 to ics except my device is locked with status code 0. Help?
On RSD lite :
Failed flashing process. 2/22 flash partition "partition_signed"->Phone returned FAIL
On the Phone :
Device is unlocked, Status Code : 3
Batterie OK
Transfer Mode:
USB connected
Fastboot reason: Flash Failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
same problem for me any help would be very nice !

[Q] Failed flashing process. Unknown command [getvar]

Hey all,
Having an issue with RSD Lite. My phone is rendered useless and I am stuck in fastboot mode. I have the correct version of the fastboot files, I have done everything (I think) correctly. However, when I try to restore my phone and flash the file, I get an error saying: Failed flashing process. Unknown command [getvar]
What is wrong? Any help at all would be really appreciated.
-nrsmac

[Q] Motorola droid razr maxx hd Bricked or something please help

i was on android 4.4 kitat but i wanted to go on 4.1 Jellybeans
so i try to downgrade it, i use Droid Razr Hd Utillity 1.21 to downgrade it to its stock firmware but phone is stuck and now if i try to put any firmware in it
Via RSD LITE its giving error "Failed flashing process 2/20 flash partition "gpt.bin" phone returned FAIL"
But if i try to put firmware Via RSD but with profile Universal its giving me error "Failed flashing process. 11/15 flash boot "boot.img" -> Phone returned FAIL"
i read it some where if i can create profile Via RSDScriptGenerator its gonna make 3 profile Full,Keep Data,Universal
and i have to use universal if i am trying to downgrade but its not working
i even try to put 4.4 in it again but its also not working phone is stuck on Fastboot Flash Mode for now
On other hand on phone error is
"downgraded security version
update gpt_main version failed
preflash validation failed for gpt
Partition (boot) Security version Downgraded
preflash validation failed for boot"
can any one help me because i think its soft bricked
You're getting the error because you tried to downgrade. Is your boot loader unlocked? If it's not, you can't downgrade. There's a thread in the general section with the latest FW, grab that and flash it, you should be good. If you're unlocked, you still need to correct the error. Flash the latest FW and use the guide in the general section to downgrade.
Sent from my HTC6525LVW using Tapatalk

Droid Maxx Help possibly bricked

I have run into trouble using this method: https://www.youtube.com/watch?v=hb0jKB8OFko to flash stock firmware
My device: Droid Maxx
Bootloader locked, not rooted
4.4.4 at the start of the process
I downloaded the suggested firmware and ran into problems.
The first time I attempted it RSD appeared to flash everything except system.img which got hung up and the bootloader gave me a message in red stating: "no valid piv block in sp for system" This occured with the 1FF-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 software.
Figuring I had the incorrect firmware i tried two other roms: 1. CFC-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 and 2. 1FF-obake-maxx_verizon-user-4.4.4-SU6-7-release-keys.xml.zip 1.0.0. Both failed with a different error message. This time RSD and the bootloader told me "preflash validation failed for gpt".
I have tried this with RSD 6.1.5 and 6.2.4
My suspicion is that I don't have the correct firmware, but I could be wrong.
The bad news is that the phone will not boot into recovery or normally. The good news is that the phone WILL enter bootloader mode and RSD WILL recognize it.
Anyways any help would be greatly appreciated.
Stanleywinthrop said:
I have run into trouble using this method: https://www.youtube.com/watch?v=hb0jKB8OFko to flash stock firmware
My device: Droid Maxx
Bootloader locked, not rooted
4.4.4 at the start of the process
I downloaded the suggested firmware and ran into problems.
The first time I attempted it RSD appeared to flash everything except system.img which got hung up and the bootloader gave me a message in red stating: "no valid piv block in sp for system" This occured with the 1FF-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 software.
Figuring I had the incorrect firmware i tried two other roms: 1. CFC-obake-maxx_verizon-user-4.4.4-SU6-7.2-release-keys.xml.zip 1.0.0 and 2. 1FF-obake-maxx_verizon-user-4.4.4-SU6-7-release-keys.xml.zip 1.0.0. Both failed with a different error message. This time RSD and the bootloader told me "preflash validation failed for gpt".
I have tried this with RSD 6.1.5 and 6.2.4
My suspicion is that I don't have the correct firmware, but I could be wrong.
The bad news is that the phone will not boot into recovery or normally. The good news is that the phone WILL enter bootloader mode and RSD WILL recognize it.
Anyways any help would be greatly appreciated.
Click to expand...
Click to collapse
Okay, as long as you can enter fastboot (bootloader mode) there is hope. That's the first thing.
Since RSD recognizes your phone then there is obviously something wrong with the flashing process. You can use either the 1FF obake-maxx or CFC obake-maxx firmware. The 1FF keeps your apps and data intact while the CFC firmware wipes everything off your phone and you start clean. I would recommend using the CFC so you do not anything left over from previous flashes. Also, make sure the entire firmware file is downloaded. I got only partial downloads( like 150/200 mb) several times when I tried to download the files. Both the 1FF and CFC should be about 900 or so mb each. Exactly what steps are you following? And where are you getting your downloads from?
classic757 said:
Okay, as long as you can enter fastboot (bootloader mode) there is hope. That's the first thing.
Since RSD recognizes your phone then there is obviously something wrong with the flashing process. You can use either the 1FF obake-maxx or CFC obake-maxx firmware. The 1FF keeps your apps and data intact while the CFC firmware wipes everything off your phone and you start clean. I would recommend using the CFC so you do not anything left over from previous flashes. Also, make sure the entire firmware file is downloaded. I got only partial downloads( like 150/200 mb) several times when I tried to download the files. Both the 1FF and CFC should be about 900 or so mb each. Exactly what steps are you following? And where are you getting your downloads from?
Click to expand...
Click to collapse
Thanks for your help, but it appears that I have resolved the issue. As it turns out, the software need to be extracted to and launched from a clean folder. I had been placing it in the same folder I had adb and fastboot. My guess is that having the other version of fastboot in the same folder as the XML file confused RSD and caused the problem.
Stanleywinthrop said:
Thanks for your help, but it appears that I have resolved the issue. As it turns out, the software need to be extracted to and launched from a clean folder. I had been placing it in the same folder I had adb and fastboot. My guess is that having the other version of fastboot in the same folder as the XML file confused RSD and caused the problem.
Click to expand...
Click to collapse
Great! Glad to hear you resolved your problem. :good:

Urgent help to flash my 2013 moto x xt1060 vzw

Hi guys! I was trying to root my moto x and somehow messed up. I can get into fastboot, but havent been able to root it with RSD lite as im running into the same error as this person, and no, his fix doesnt work for me.
"I have a Verizon 2013 Moto X(XT1060) running 4.4.4(KXA21.12-L1.26) and I'm running Windows 7 64bit. And I'm following this guide.
I'm trying to root my phone but I'm stuck trying to revert it to stock 4.4.4. I have the drivers install, it shows up in windows explorer and in device manager, RSD Lite recognizes the device as Fastboot ghost S when I'm in the bootloader and says it's connected, the firmware I'm trying to use is called "VZW_XT1060_4.4.4-KXA21.12-L1.26_CFC_1FF.xml.zip", I've removed the "<step operation="getvar" var="max-download-size" />" line from the XML but whenever I try to start the flash I get an error saying "Failed flashing process. 2/17 flash partition "gpt.bin"-> Phone returned FAIL." and my phone reads "process oem command: fb_mode_set, getvar max-download-size, downloading 32768 bytes, done." I've tried moving the files multiple places, running RSD as admin and so far no luck and I completely wiped my phone. Any ideas?
edit:I fixed this by navigating to C:\Program Files (x86)\Motorola\RSD Lite and changing the SLD.exe to run in XP service pack 3 mode and as administrator."
Failed flashing process. 2/17 flash partition "gpt.bin" -> Phone returned FAIL.
The factory stock before this happened was 5.1 ghost
I would like to get it back to it but any version would work!
Thanks
ebirdy9 said:
Hi guys! I was trying to root my moto x and somehow messed up. I can get into fastboot, but havent been able to root it with RSD lite as im running into the same error as this person, and no, his fix doesnt work for me.
"I have a Verizon 2013 Moto X(XT1060) running 4.4.4(KXA21.12-L1.26) and I'm running Windows 7 64bit. And I'm following this guide.
I'm trying to root my phone but I'm stuck trying to revert it to stock 4.4.4. I have the drivers install, it shows up in windows explorer and in device manager, RSD Lite recognizes the device as Fastboot ghost S when I'm in the bootloader and says it's connected, the firmware I'm trying to use is called "VZW_XT1060_4.4.4-KXA21.12-L1.26_CFC_1FF.xml.zip", I've removed the "<step operation="getvar" var="max-download-size" />" line from the XML but whenever I try to start the flash I get an error saying "Failed flashing process. 2/17 flash partition "gpt.bin"-> Phone returned FAIL." and my phone reads "process oem command: fb_mode_set, getvar max-download-size, downloading 32768 bytes, done." I've tried moving the files multiple places, running RSD as admin and so far no luck and I completely wiped my phone. Any ideas?
edit:I fixed this by navigating to C:\Program Files (x86)\Motorola\RSD Lite and changing the SLD.exe to run in XP service pack 3 mode and as administrator."
Failed flashing process. 2/17 flash partition "gpt.bin" -> Phone returned FAIL.
The factory stock before this happened was 5.1 ghost
I would like to get it back to it but any version would work!
Thanks
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried asking in this guide thread? Perhaps one of the users there has had a similar issue
Good Luck
Sawdoctor

Categories

Resources