Dear Friends,
I have a problem
I recently downloaded movies from the laptop to the tablet, a lot of films, and the tablet crushed. I rebooted it. When I load the appear inscription "ACER" and he ceased to be switched
what could be the problem?
Related
Hello, I have a big problem with my tablet g-tablet I
just received, and I installed Clockworkmod Cyanogen
6.1.0 in the device manager of my pc
tablet is recognized as Nvidia harmony impossible
put a pilot so the tablet is not in the position
work and I can not do transfer, I
need help thank you in advance
G-tablet said:
Hello, I have a big problem with my tablet g-tablet I
just received, and I installed Clockworkmod Cyanogen
6.1.0 in the device manager of my pc
tablet is recognized as Nvidia harmony impossible
put a pilot so the tablet is not in the position
work and I can not do transfer, I
need help thank you in advance
Click to expand...
Click to collapse
well you post is kinda confusingly writen lol but did you anable the usb transfer....
slide down status bar an choose usb connection
Hello,
I bought a 32G WiFi Xoom yesterday, and on the first start up it was fine. I connected to the WiFi successfully, installed Angry Birds (Original, Rio & Seasons), Skype, Face Effects, Comics, Marvel Comics, DC Comics, Cyanide & Happiness, and nothing else. I then turned the tablet off for the night.
When I woke up, I turned the tablet on this morning, and as it started up it restarted again, I wondered why. I realized it was when it connects to the WiFi (same one that worked fine last night), it decides to restart the Tablet. I turn the WiFi off and it's fine.
Why?
Hi
I have a W500 I did a clean install of windows 8 onto, it booted fine a couple of times and now when I switch it on all I get is the windows key on the tablet blue and a black display. I can tell the tablet is on and is attempting to do somethings as I can see the usb dvd-drive I attached via the keyboard trying to read. I tried holding the windows button on the tablet and powering on but I have had no luck getting the device to even display the bios, I even disconnecting the msata drive to see if it would at least give me a message but I had no luck.
Can anyone help me to unbrick my Iconia W500?
Αs the title says, the device does not start, it is completely dead.
I tried to disconnect the battery and reconnect it without any changes.
I tried to charge it with an external source without a result.
Any ideas ??? BIOS chip needs reprogramming???
THANKS
Hi there. I have this model. Have you ever tried to turn on with a HDMI output plugged in? In my case it works. But the bios I'm still looking for
Hello! Recently got the tab. C2D8. Couldn't turn it on, the screen remained black. Thought the tab is dead, but it wasn't. plugged into dc outlet, usb tester showed charge. Then installed the drivers and when connected to pc it appeared in device manager. Put it into dnx mode, flashed firmware. Didn't help. Lastly connected it with hdmi to TV, and there came the picture. The tab screen is very dull, brightness wa set to max, though. Is there a software solution, or is it a hardware defect and should be sent back?
Hi. Same happens to me with Teclast X98 Plus II C2D4.
I need to plug my TV through HDMI. Boots in black screen on the tablet but it's ok on TV.
Android runs with very low brightness on tablet screen but Win10 runs ok. Screen looks perfect on the tablet.
So any possible solution?
Thanks.
Hi, did you find a solution to this issue?
I still have the same problem.
Thanks.
Hello all, I've ported (or rooted?) one of my Nook HD+ tablets to Android 5.1 using the process given by PeteInSequim here. The process went well, and the tablet works great except for one thing. When I connect the Nook to my Acer laptop running Windows 10 Pro, via the usb cable, Windows Explorer does not recognize it, nor does it show up in device manager, and it did prior to the upgrade. If I remove the external microsd card and use the Acer card slot, I can access it. I want to be able to put some games on it for an elderly friend of mine who has trouble using a regular computer / laptop and likes a touch screen. Am I missing something ie. drivers or some other software? Is it possible to side load 5.1 using the laptop versus the wifi on the tablet to decrease the download time? Any help would be greatly appreciated. Thanks, Roger
rmissildine said:
Hello all, I've ported (or rooted?) one of my Nook HD+ tablets to Android 5.1 using the process given by PeteInSequim here. The process went well, and the tablet works great except for one thing. When I connect the Nook to my Acer laptop running Windows 10 Pro, via the usb cable, Windows Explorer does not recognize it, nor does it show up in device manager, and it did prior to the upgrade. If I remove the external microsd card and use the Acer card slot, I can access it. I want to be able to put some games on it for an elderly friend of mine who has trouble using a regular computer / laptop and likes a touch screen. Am I missing something ie. drivers or some other software? Is it possible to side load 5.1 using the laptop versus the wifi on the tablet to decrease the download time? Any help would be greatly appreciated. Thanks, Roger
Click to expand...
Click to collapse
Sorry, I went ahead and upgraded to Nougat and now file explorer sees the nook...
Thanks anyway,
Roger