Related
Hey and Salam everybody,
important note: i am taking no responsibility if your phone dies or what so ever. do wipe reset your phone through stock recovery before proceeding. only use the softwares i provided. and also only email me if you run into problems using the softwares i provided. and please wipe data reset ur phone before proceeding. all the softwares are in my dropbox
This is my first ever post so make sure if you get your problem solved i would very much appreciate that you help others too.
All the credit goes to rua1 (http://forum.xda-developers.com/member.php?u=5119815)
I bought the phone a month back and spent 3 weeks trying to root this MTK6575 Chipset.
You can only root this phone through test point from PMT method. Google test point and pmt for more information.
Attached a pic showing a test point cable . people having knowledge of modding 360 will know what a pmt is. its pogo mo thoin. but for phone its bit different.
first of all turn your phone on and connect it to mtkdroidtools and then make scatter of it. and save it for future use . picture attach. clik blocks map and then click create scatter.
its better to go into stock recovery and wipe data reset and wipe cache. take your sim cards out and your memory card. you dont need them.
my phone details.
Model Number : A2
Android version : 2.3.6
Baseband Version: MAUI.11AMD.W11.50.SP.V14.P2, 2012/09/07 10:26
Kernal Version: 2.6.35.7 [email protected] #1 Thu Oct 11 13:41:54 HKT 2012
Build Number : ALPS.GB2.MP.v2.2
Custom Build Version : S8035S_PP_F1_PK_1.06_V3
Files you need:
1 Drivers For MTK6575 - Qmobile A2 V3
2 Google ADB Latest
3 MTK Droid Tools
4 Smart Phone Flash Tools
5 Superuser-3.1.3-arm-signed
you can find all these files in my dropbox
https://www.dropbox.com/sh/3wjle4gfu9ekc2x/2Y2f1yuZlE
install drivers for mtk6575
open flash tools and select scatter loading. select the scatter MT6575_Android_scatter that was made earlier and click ok. go to second tab in flash tools. now your in read back tab. click add. save the file titled rom_1 in the extracted mkt droid tools folder. then select hex and read page only . in start address write 0x0000000000000000 and in length 0x10da0000 < this is the address of cache in scatter and your might be different depending on the date you bought the phone.
click ok
now click read back plug in the usb cable with no battery in and just touch the needle with the test point in pic. it will start reading back. once it completes it will give you green circle.
now go to mtkdroidtools and open mtkdroidtools.exe turn on your phone normally and let the tools detect the phone. once it detects you will see different information on main screen. now goto second tab (root, backup, recovery) and click " to process file ROM_ from flash tool" at this point locate the file rom_1 you just saved in rom folder of extracted mtk droid tools. once you give it the location it will start processing. it will ask you if you want it to automatically make cwm ? click yes once the process gets complete you will have multiple files in
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
your folder name will be different depending on date and time.
inside the folder you will have lots of files. the file you need to flash will be A2_121030__recovery_130415-104113 again the numbers at the end of the file depends on your date and time.
now again open spflash tools on the main screen select scatter loading. locate this folder.
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
open the scatter and uncheck all boxes . check only one box that says recovery. double click on and find this file.
A2_121030__recovery_130415-104113
its in \MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
now click download ignore the warning take the battery out insert the usb cable and make sure to touch the test point after u click download . note that from this method ur phone is in bootrom mode. if everything is successfull youll get a green circle.
you might get errors and for that your scatter must be edited for example adding __NODL_ before CACHE in scatter. if that doesnt work then you might have to add __NODL_ before USRDATA and if still ur gettin error well then email me.
now to test recovery press both vol+ and vol- button at the same time and hit power . go into recovery by pressing vol+. and you have cwm on your phone. now the first and most important thing take backup and save it,
its also better to stay into recovery and open mtk droid tools and make bakcup by going into second tab.
after that put Superuser-3.1.3-arm-signed on ur sd to flash through cwm
now flash superuser-3.1.3-arm-signed through cwm
turn on your phone and see if you have superuser on ur home screen
open super user and grant permission and voila your rooted go to info tab and check for updates
thats it your phones rooted.
if i helped you then press thank
in the attachment you can see the cable i made. make yours the same way
UPDATE: SPFT and MTKDROIDTOOLS update versions have been put in dropbox.
again if you encounter pmt layout changed or other errors then email me so i can help you gettin rid of errors with editing the scatter. [email protected]
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Bro nice method also add the mtk droid tools method i have posted in my root guide because this methods does not work in my phone
bilalz400 said:
Bro nice method also add the mtk droid tools method i have posted in my root guide because this methods does not work in my phone
Click to expand...
Click to collapse
ok i will add that but u can try other method which is working for some members , see my signature :good:
qmobilea2 said:
ok i will add that but u can try other method which is working for some members , see my signature :good:
Click to expand...
Click to collapse
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app
bilalz400 said:
I have fixed my imeis long ago I was just telling u to add the method as we'll
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
ohkey!! link ur thread here so i can add it here
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/
fmnok7ke7
1. remove all sim cards from phone ,turn on
the phone in normal mode and connect it
2. open mtk tools press root button it will ask
you for some thing just click ok
3. Click replace imei and enter the imei
numbers (can be found on phone box or back
of phone)
4. Click ok reboot your phone check for
updated imei numbers
Click to expand...
Click to collapse
Credits to @rua1 for mtk droid root and tools
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Doesnt work. I dont have any folder after the MD folder so I created a new one still no IMEI
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Try using another phone's nvram.bin, which is illegal and modify the IMEI with SN Write Station or any other tools to correspond with that of your phone.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
I did those already non works. I Send the phone back to the manufacturer and I have to wait for a month for replacement.
It is working for me..
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
I've tried all the other software like the IMEInSe writer, the MauiMeta 3g, MTK droid tools... none of them worked. But the method mentioned above worked for me.... now there wasn't any NVRAM error in the wireless notification.... The simcard can register to the network as well... this is flawless...
just to share... CPU version showed by the software was MT6572, but if i boot it in factory mode, it tells me its MT6589... I do not know which one is the right one, but the above methods worked for me.... Samsung S4 Korean (clone 1:1) mediatek. running JB Android 4.2.2..
Thanks...:good::good::good:
billy_cater said:
1. check your baseband with mtkdroidtool if it null,you just only use flashtool format it (whole flash) and up rom again,your baseband will return,imei still null.Now you can use mtkdroidtool to re-write your imei,or use Imei & SN writer tool for hard imei.
2.if you still have baseband,just can not write imei throw mtkdroidtool -> just use Imei & SN writer,please install full driver for your mtk devices, include cdc driver
Click to expand...
Click to collapse
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?
phaw16 said:
Thank you for your reply sir, However the IMEI & SN Writer I tried using that but I always receive an error that "cannot write meta data something" any other ideas?
Click to expand...
Click to collapse
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work
billy_cater said:
please sure you already install cdc driver and have database file for your devices (mtk6577,6589.....) i use it for all my mtk devices and it alway work
Click to expand...
Click to collapse
Yes I am absolute that I installed all necessary files driver and etc there are no errors on my device manager or whatsoever. Its just the cannot boot on metadata something error.
bilalz400 said:
Credits to @rua1 for mtk droid root and tools
Click to expand...
Click to collapse
Sir, one of the links is not working.
yeahhhh nice work dude !
i follow this step and its work for me!
thank you so much. :good:
Oh my man! you just saved my day! this trick really work by the way i just restore my original IMEI in my phone that found in my warranty card! anyways thanks more power and thanks for sharing
qmobilea2 said:
Hello to Xda members,
Since i get a invalid imei issue in my Qmobile A2 so i start searching on different forums nd then i i get this method ,this method is totally of chinese forum (i cant post reference link} so full credits to them but also me
so here we start.
STEPS
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press windows key + R
-In the run box type in cmd
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter
If both IMEI you gave are in correct format the file named MP0B_001_NEW will
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
DONE:victory:
WARNING
Although this method is working for me but if get in trouble by following this method then i am not responsible.!!
:good:.
Click to expand...
Click to collapse
Yeah sure this method can work but if your baseband is messed up? what do you do? that is the question?
You truly are a legend mate.
Holy**** it worked for me, your method saved my ass Thank you.
It really works like charm.
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
error
error enter meta mode fail
bhartendra said:
error enter meta mode fail
Click to expand...
Click to collapse
check CDC drivers installed or not.....or reinstall CDC drivers
Meta Mode Fail
digyvijaykumar123 said:
check CDC drivers installed or not.....or reinstall CDC drivers
Click to expand...
Click to collapse
all drivers are installed successfully but still MetaMode fail error..
it work on canvas2 yes or no plz reply
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
srs1434 said:
all drivers are installed successfully but still MetaMode fail error..
Click to expand...
Click to collapse
i m agree with u
Is it worked for any one...If yes I would like to try it once coz every time I install new ROM my imei will be lost, since I have backup of IMEI every time I need to restore this backup file from Mobile uncle tool. Which is annoying process after every new ROM installation.
same error here and the driver are installed!
digyvijaykumar123 said:
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
Click to expand...
Click to collapse
It's full of BULL**** ADS & POP-UPS the download links.......... Don't post if you want to waste users time instead of helping them.... Utter nonsense
REQUIREMENTS
Rooted Device
Custom Recovery
(CTR, CWM Recommended)
Click to expand...
Click to collapse
One week after i brought my phone, I accidently formatted my device using sp flash tools and lost the IMEI/NVRAM. It has been a real pain for me to repair it because i was new to an mtk device. Finally figured out how to repair by doing many search. So I made this thread to share the working methods to help those people who are suffering from invalid IMEI
So let's start.
Always remember "Prevention is better than cure". If you are planning to flash a custom rom, First of all Backup your IMEI. Don't Trust that a custom ROM flash will not delete your IMEI number. because odds are it will. It's important to store your backup to external SD because some ROM flashing techniques will erase your internal SD. so the best way to keep your IMEI number is to take my advise and make a backup.
Some Video tutorials will be added soon
DISCLAIMER: Do not do try any of these methods unless your IMEI has been lost! Doing so may permanently corrupt your imei partition.
IMEI Backup & Restore Methods:
1. Mobile Uncle Tools:
1. Open the App,
2. Select IMEI BACKUP RESTORE (MTK)
3. Choose BACK UP TO SDCARD (MTK)
4. Reboot
>> (to restore, choose restore from sd card)
2. MTK Droid Tools [PC Required]:
1. Switch on the phone and connect it to pc.
2. Go to settings->about phone.
3. Tap build number for 7 times.
4. Go back and enter developers options, and check usb debugging on.
5. Start MTK Driod Tools and click root. grant root permission in phone.
6. Click IMEI/NVRAM and click backup or restore as required.
>> (to restore, choose the backup file from nvram backup folder)
Temporary IMEI Restore (without Backup):
(These are Temporary Methods, so you need to do this every time you upgrade Firmware, install a new rom, or doing a factory reset.)
1. Chamelephon
1. Install Chamelephon.apk
2. Open App
3. Type both IMEI Numbers
4. Click "Apply new IMEIs"
5. Reboot
Video Tutorial
2. MTK Droid Tools [PC, ADB Drivers Required]
1. Enable USB debugging
2. Open MTK Droid tools in PC
3. Allow USB debugging in phone if asked
4. Click ROOT button in MTK droid tools
5. Click Yes and Grant/Authorize root permission in phone
6. Click IMEI/NVRAM option in MTK droid tools
7. Type both IMEI numbers
8. Select "Replace IMEI"
9. Click OK
10. Reboot!
Video Tutorial
2. NVRAM Wifi Error
1. Download "NVRAM Wifi Fix.zip"
2. Enter Recovery
3. Install the zip
4. Reboot
Permanent IMEI Restore(without Backup):
1. Maui META 3G Tool
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options ↦ Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Download & extract "NV Ram Database Files.rar"
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
2. IMEI&SN Writer
Didn't tried this method. Hope this too will work!
1. Flashing NVRAM.bin (Recommended for Lolipop Roms )
1. Install SP flash tool
2. Load Scatter file
4. Now press download
5. Connect your phone without battery
6. Insert battery & turn on your device when you see the green tick.
new blog under construction:
for broken links, and other video guides, click here
DOWNLOADS
MOD EDIT - ALL THE LINKS ARE REMOVED SINCE XDA RULES DO NOT PERMIT PAY PER CLICK.
I really worked hard to make this thread. Hit THANKS button if you found this useful
You can add your experience in fixing imei below on this thread. It may help many others! Always remember, Sharing is caring! Thank You.
Reserved
Reserved
USB VCOM Driver installing guide: http://forum.xda-developers.com/showthread.php?t=2206421
NVRAM Error and Serial Number fix with SN WRITE STATION TOOL on unite 2
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
cdc drivers....
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
No Sim card detect in my UNITE 2
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
dark_x said:
hii dude
the tutorial above was good enough bt the thing is tat can u provide link for that cdc drivers which was needed in thah maui thing plzzz
Click to expand...
Click to collapse
I didnt have it right now. Don't know that where did i find those drivers. Search it in google. I will try to figure it out as i got some free time.
viru_192 said:
Hi, Please help me, I updated to lolipop and after that my phone cannot detect sim card. Later I rooted, installed another roms, but still the same issue. Please reply urgently.
Click to expand...
Click to collapse
What about your imei number???
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
rahulsingla said:
Hey Guys as u know imei fix with muai meta software guide is already given on first post of unite 2 thread .... So i don't need to guide here to all of you keep in mind before fix imei with muai meta please reset your phone otherwise it sometimes don't detect..
Here in this Guide i will describe how to fix NVRAM error and write serial number with sn Write Station tool
I have also unite 2 8gb model and i have tried it successfully on my lollipop unite 2 device if you are on kitkat may it will work but this guide is only for lollipop users :
steps:
Before starting please see if you have already installed mediatek usb vcom drivers which is needed for flash rom using sp flash tool.
1. First of all download sn write station tool v1.5.3--20121018. i test it with this version.
2. Now extract your stock rom.
3. Now run sn write station tool and select smartphone from platform drop-down option.
4.Select usb instead uart mode.
5. Now tick on sn and wifi only under write item section.
6. Now write your serial number of your device in sn textbox.
7. In wifi textbox write your wifi mac address without colon. after correct wifi address written a green tick will appear.
( To know your correct wifi address go to setting>wifi> option advance>MAC address>
here you will see your correct address write down on sn tool without colon. )
8. Now select db file from extracted rom. name of file is APDB_MT6582_S01_L0.MP2_W15.09
9. Now click on start.
10. Now tick usb debugging in device and switch off your device and connect to computer with battery.
11. in sn write tool it will show successful :good:
12. Sometimes sn write tool switch on your mobile in meta mode but don't write sn and wifi address. Just unplug your device and reconnect it with same condition in which you plup out your device..
if it is in on (boot logo) situation then connect it as it is. otherwise connect it again in switch off mode again.
13. Sn write tool do its work. after successful unplug your device and restart your phone.
This method is successfully tested by me. may be it will helpful to you.
Click to expand...
Click to collapse
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
answer
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Yes i select same file for twice name of file is given above in my post and i never try to write other things like bt address, imei same time but i want to say don't try to write bt address because it will show error every time when you try to write and i also want to say that imei number can be written with this tool but select only imei don't other things like sn number, wifi mac address.......etc. try one thing only at same time. means when you want to write imei then select only imei but you can choose sn and wifi mac address at same time it can be flashed successfully......
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
dark_x said:
I tried to google it bt didn't found any appropriate link
Bt try to put up a link for those drivers...
Thanks...
Regards dark_x
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
find drivers in this link ..... thanks to kumar abhishek for his guide for driver and installation procedure.......
nice_guy75 said:
I tried this method but every time I tried, I was getting "Entre Meta Mode Failed" I am unable to understand why my device is not going into meta mode. I have written IMEIs and MAC IDs with this tool on Canvas HD, hell lot of time.
The process for Canvas HD is little different, I used to select both the database files, first "BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V6_P18" and then this one "APDB_MT6589_S01_MAIN2.1_W10.24" secondly I used to power on my device "Power On" msg was displayed on SN Write Tool.
I tried all possible scenario, selected only one database file, changed the sequence of selecting database files, tried to turn it off after hitting start but worked nothing for me.
When we select Database files the window opens twice, did you select same file both the times? And have you tried to write all the things together, means IMEIs, MAC ID of BT and MAC ID of Wifi in just one go?
Click to expand...
Click to collapse
Hey i have the same problem. Did you find any solution?
girrafe said:
Hey i have the same problem. Did you find any solution?
Click to expand...
Click to collapse
I got this issue while running on lolipop firmware, trying to write imei with my PC running Windows XP, but for kitkat, it works.. These applications didn't worked for me in Windows 8.1 and 10
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
johnygeorge said:
Hi, I updated my unite 2 to lolipop and after that my phone cannot detect sim card. Later I formatted my rom, and installed kitkat rom, but now it showing that invalid imei .and also battery is draining too fastly .please help me sir. reply urgently.
Click to expand...
Click to collapse
try the permanent imei repair method mentioned in the first post.
ajiththiruvatta said:
try the permanent imei repair method mentioned in the first post.
Click to expand...
Click to collapse
Bro thanks for helping me. I hv one last question i hv nv ram.bin file of my stock rom ok but when i load scatter file in sp flash tool there is no option to flash nvram.bin if u try figure it out i will appreciate.
I had an Infinix Note 7, Which I format all + downloaded from SP Flash Tool, everything was gone, after 6 Months of Trial and Error, here is How I fixed it.
BASEBAND FIX:
Prerequisites: Be on Stock Rom, (The one where Baseband was, AKA, the one you were using before you messed up.), Locked Bootloader, Download TFT Tools, (It is a Crack, so No links. Search on YT).
Open TFT Tools, and Go to Mediatek Section.
Go to Bottom Left, and Click Extras.
Click "Fix IMEI Baseband" and insert Infinix Note 7 by pressing Vol+Up Button.
It will take about 2-3 Minutes to fix.
Restart Device.
IMEI FIX:
Prerequisites: Close All Apps, Otherwise the Process may Crash, Locked Bootloader, Download AfterSalesTool v1.5.1, and Modem Meta v10.2044.0.02, and a Valid Baseband (Use Above Method to Fix Baseband.)
To Fix IMEI, open AfterSalesTool, and Select Infinix from the Phone Category, and Select Model as X606, I repeat, X606.
Click the Connect Button and Insert Mobile without Pressing any Buttons.
After 2-3 Minutes, The Progress Bar will become Green, and then the Details of Phone will be listed.
Open Modem Meta Tool. Click: "More" with the Option: "DUT in Meta Mode"
Change the Port to USB, and from Auto Connection to your Device. (Connect Mobile if not Visible).
Click Connect.
It will give an error, Click OK, plug out the Cable from PC, I repeat, from PC, not Mobile, then Reconnect it, and again click Connect.
Now it will completely Connect. Search IMEI Download, And Input ONLY ORIGINAL IMEI, (Check from the BOX BEHIND). (Otherwise, I am not responsible for Thermonuclear War, or Jail, as It is Illegal)
Click Write, 2-3 Times, to make sure, it is written.
Restart Device and dial *#06#, Congrats your IMEI is Back.
WIFI MAC & Bluetooth MAC:
Prerequisites: Locked Bootloader.
Open AfterSalesTool, Select Infinix from Category, Model as: X606.
Click Connect, and wait 2-3 Minutes till it is Connected.
Go to MAC Area, And the Heads are the Prefixes of your MAC Address, The First Head is for Bluetooth (BT Means Bluetooth), and the Second Head for WiFi.
If you have noted your WiFi and BT Mac, Well and Good, Go Flash it.
But, if you haven't, like me, go search for "MAC Address Generator - Generate Random MAC Addresses" and open the website.
Enter the Bluetooth Prefix and then select the format without any colons, or dashes.
Generate it, copy it, paste it in the AfterSalesTool.
If it says, it has an Illegal Character, again generate it, Try again. Keep trying till it successfully flashes.
Do the Same for WiFi Mac, copy its Head, Format without any colons or dashes, and generate.
Keep Trying till it Flashes.
Restart to check your MAC, it will also fix your NVRAM err = 0x10
And Viola, now you have WiFi MAC, and BT MAC, IMEI, and your Baseband Back!
Now Take a Backup through SP Flash Tool, as you Can't Take Any Risk.
Take Backup of NVRAM and NVDATA:
Prerequisites: SP Flash Tool, MTK Auth Bypass Tool, and a Phone with All those things Discussed Above.
Open Scatter File, Press Ctrl+F and search for NVRAM, note down physical_addr, and partition size.
Open SP Flash Tool, and Load MT6768 Scatter File.
Go to Readback Section, and click on add.
It will ask you to where to save it and *WHAT TO NAME IT*, Name it "Nvram.bin" (Name it exactly this or it will not detect in Restore) and click save.
Now it will ask the physical_addr and Partition size. Copy those values and enter there.
Click Ok.
Now click on Add again, it will ask for where to save it, Name it: "Nvdata.bin" (Name it exactly this or it will not detect in Restore) and click Save.
Now it will ask the physical_addr and Partition size, Go to Scatter file, Press Ctrl+F and search for Nvdata.
Enter those Values in the Respected Boxes in the SP Flash tool and click OK.
Disable Auth using MTK Auth Bypass Tool, or if you have Modified SP Flash tool, Disable Auth from there. and click "ReadBack".
Connect Mobile using Vol+Up.
It will back up in the Designated Place.
Restore NVRAM and NVDATA:
Prerequisites: Nvram.bin and Nvdata.bin of a Working Phone, SP Flash tool, and an unlocked Bootloader to avoid Errors.
Let's say you #### up again, and now, your IMEI and everything is gone, you want to flash the Backup now.
To flash it, Open SP Flash tool, and use this Modified Scatter File, to flash Nvram and Nvdata.
If you face any Checksum Error, Download Checksum Generator v5.1932.00, (Search it on Internet LOL) and Extract the ZIP and place it in your firmware, Cut the Original Scatter File, and place it somewhere, and place only the Modified Scatter there, and run the checksum generator as administrator.
Select Nvram and Nvdata Partition, Disable Auth, and use Download Only Mode, and Click Flash.
After 1-2 minutes, it will be complete.
After completion, restart your device, and Viola, Your IMEI and MAC's, and Baseband is back.
I hope this Tutorial Helped a lot of you guys, as there was not much Information for me available on internet on how to fix this exact Model, as it is too stubborn to go in Meta Mode.
If you need any Assistance, Reply to this thread, or PM Me. I will help you guys. Take Care!