I kept my cm11 nightlies up to date Until it shortly stoped Working....
The output generated by twrp 2.7.0.0 and cwm is AS follows...:
Installing '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip.md5
Skipping MD5 check: no MD5 file found.
Verifying zip signature...
I:read key e=3 hash=20
I:1 key(s) loaded from /res/keys
I:comment is 1738 bytes; signature 1720 bytes from end
I:whole-file signature verified against key 0
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "HHZ11k"
assert failed: getprop("ro.bootloader") == "HHZ11k"
E:Error executing updater binary in zip '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'
Error flashing zip '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'
Updating partition details...
Iata backup size is 5604MB, free: 7217MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Any ideas?
Sent from my Nexus 5 using xda app-developers app
I believe the problem is that your bootloader is outdated. As seen in this commit, CM has recently made changes that may not work properly with older bootloaders. Therefore they have added a check to the updater script to make sure that you are on the latest bootloader and the rom will only install if you do. Go into fastboot mode and check what bootloader version you have. If it isn't HHZ11k, you need to install it. You can get it here.
Mr.Gosh said:
I kept my cm11 nightlies up to date Until it shortly stoped Working....
The output generated by twrp 2.7.0.0 and cwm is AS follows...:
Installing '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip.md5
Skipping MD5 check: no MD5 file found.
Verifying zip signature...
I:read key e=3 hash=20
I:1 key(s) loaded from /res/keys
I:comment is 1738 bytes; signature 1720 bytes from end
I:whole-file signature verified against key 0
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
script aborted: assert failed: getprop("ro.bootloader") == "HHZ11k"
assert failed: getprop("ro.bootloader") == "HHZ11k"
E:Error executing updater binary in zip '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'
Error flashing zip '/sdcard/cmupdater/cm-11-20140322-NIGHTLY-hammerhead.zip'
Updating partition details...
Iata backup size is 5604MB, free: 7217MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Any ideas?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
If you download the latest factory image from here: https://developers.google.com/android/nexus/images#hammerhead
Then extract and flash the Radio (fastboot flash radio radio-hammerhead-m8974a-1.0.25.0.23.img) and Bootloader (fastboot flash radio radio-hammerhead-m8974a-1.0.25.0.23.img)
reboot the phone then boot into recovery and flash as usual with CWM you should be good to go.
will flashing the bootloader wipe my phone? I vaguely remember something about the bootloader that wipes your phone if you changed it. was it oem unlock that I was thinking about or flashing the bootloader?
Routaran said:
will flashing the bootloader wipe my phone? I vaguely remember something about the bootloader that wipes your phone if you changed it. was it oem unlock that I was thinking about or flashing the bootloader?
Click to expand...
Click to collapse
Flashing a new bootloader won't wipe your phone.. "fastboot oem unlock" does!
Thank you! Bootloader update here I come!
when i try to install nethunter on my oneplus one im getting below errors
ui_print - Kernel installation completed
ui_print
@checking for Kali Chroot in installer...this can take a while...
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
minzip: Extracted file "/data/local/kalifs-full.tar.xz"
about to run program [/tmp/extractchroot.sh] with 1 args
mount: mounting /dev/block/mmcblk0p28 on /data failed: Device or resource busy
Found chroot to be installed
Extracting chroot...
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
@finished Install
script result was [1]
I:Updater process ended with RC=0
I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram12' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram14' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram16' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram10' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram13' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram15' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram9' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram11' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram8' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram2' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop2' (Not a directory)
Iata backup size is 1998MB, free: 53756MB.
I:sending message to remove 65537
mtppipe remove storage 65537
I:Message sent, remove storage ID: 65537
...done
I:Set page: 'flash_done'
I:TWFunc::Set_Brightness: Setting brightness control to 25
Iperation_end - status=0
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/usb_otg/kernel-nethunter-oneplus1-lollipop-3.1.0-20160714-1621.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
##################################################
NetHunter Kernel Installer
Kernel: NetHunter kernel
Version: 2.1
Author: Binkybear
##################################################
/sbin/getprop
Checking device compatibility...
Unpacking the installer, this may take a while...Archive: /usb_otg/kernel-nethunter-oneplus1-lollipop-3.1.0-20160714-1621.zip
inflating: env.sh
inflating: zImage
inflating: patch.d-env
inflating: boot-patcher.sh
inflating: patch.d/03-no-verity-opt-encrypt
inflating: patch.d/01-ramdisk-patch
inflating: patch.d/02-supersu
inflating: tools/lz4
inflating: tools/mkbootimg
inflating: tools/cleansystem.sh
inflating: tools/unpackbootimg
inflating: system/lib/libsupol.so
inflating: system/etc/firmware/rt2561.bin
inflating: system/etc/firmware/rt2860.bin
inflating: system/etc/firmware/htc_9271.fw
inflating: system/etc/firmware/htc_7010.fw
inflating: system/etc/firmware/rt3070.bin
inflating: system/etc/firmware/ar9170-1.fw
inflating: system/etc/firmware/carl9170-1.fw
inflating: system/etc/firmware/rt73.bin
inflating: system/etc/firmware/ar9170-2.fw
inflating: system/etc/firmware/rt2870.bin
inflating: system/etc/firmware/rtlwifi/rtl8192cufw.bin
inflating: system/etc/firmware/rtlwifi/rtl8188efw.bin
inflating: system/etc/firmware/zd1211/zd1211_uph
inflating: system/etc/firmware/zd1211/zd1211b_uphm
inflating: system/etc/firmware/zd1211/zd1211b_uph
inflating: system/etc/firmware/zd1211/zd1211_ub
inflating: system/etc/firmware/zd1211/zd1211_uphr
inflating: system/etc/firmware/zd1211/zd1211b_ub
inflating: system/etc/firmware/zd1211/zd1211_uphm
inflating: system/etc/firmware/zd1211/zd1211b_uphr
inflating: system/etc/firmware/zd1211/zd1211b_ur
inflating: system/etc/firmware/zd1211/zd1211_ur
inflating: system/xbin/hid-keyboard
inflating: system/xbin/supolicy
inflating: ramdisk-patch/init.nethunter.rc
inflating: ramdisk-patch/sbin/media_profiles.xml
inflating: ramdisk-patch/sbin/busybox_nh
inflating: ramdisk-patch/sbin/hostapd
inflating: ramdisk-patch/sbin/dvbootscript.sh
inflating: ramdisk-patch/sbin/dvmediarevert
inflating: META-INF/com/google/android/update-binary
inflating: META-INF/com/google/android/updater-script
Installing busybox applets to /sbin
Freeing some space on /system
Copying firmware to /system/etc/firmware
Copying 32-bit shared libraries to /system/lib
Installing /system/xbin binariescp: target '/system/xbin' is not a directory
Running boot image patcher...- Found boot partition at: /dev/block/mmcblk0p7
- Dumping & unpacking original boot image...
Android magic found at: 0
BOARD_KERNEL_CMDLINE console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1
BOARD_KERNEL_BASE 00000000
BOARD_NAME
BOARD_PAGE_SIZE 2048
BOARD_KERNEL_OFFSET 00008000
BOARD_RAMDISK_OFFSET 02000000
BOARD_TAGS_OFFSET 01e00000
BOARD_DT_SIZE 225280
/sbin/gzip
- Detected ramdisk compression format: gzip9966 blocks
- Running ramdisk patching scripts...
- Executing: 01-ramdisk-patch
-- Patching the ramdisk for NetHunter & init.d...
- Executing: 02-supersu-- Patching the sepolicy for SuperSU...
/tmp/nethunter/boot-patcher/patch.d/02-supersu: line 7: /system/xbin/supolicy: not found
-- Unable to patch the sepolicy, continuing...
- Executing: 03-no-verity-opt-encrypt-- Disabling dm-verity & forced encryption...
-- Found fstab: fstab.bacon
- Building new ramdisk...
- Found replacement kernel zImage!- Found replacement ramdisk image!
- Backing up original boot image to /data/local/boot-backup.img...
- Writing new boot image to memory...
Boot image patching completeI:Updater process ended with RC=0
I:Legacy property environment disabled.
Updating partition details...
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram12' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram14' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram16' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram10' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram13' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram15' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram9' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram0' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram11' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram6' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop4' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram8' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram1' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop7' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram2' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop3' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/ram5' (Not a directory)
Error opening: '/data/local/nhsystem/kali-armhf/dev/loop2' (Not a directory)
Iata backup size is 2014MB, free: 53750MB.
I:sending message to remove 65537
mtppipe remove storage 65537
I:Message sent, remove storage ID: 65537
...done
I:Set page: 'flash_done'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'reboot'
I:Set page: 'rebootcheck'
I:Set page: 'confirm_action'
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 25
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'reboot'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log
Copied recovery log to /usb_otg.
I:Set page: 'action_complete'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
Truncating string cache entries.
Truncating string cache entries.
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log
Copied recovery log to /usb_otg.
I:Set page: 'action_complete'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
I:Set page: 'advanced'
I:Set page: 'filemanagerlist'
I:Set page: 'filemanageroptions'
I:Set page: 'filemanagerlist'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /usb_otg/recovery.log
Getting an Error 7 on TWRP when trying to flash cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QN-serranoltexx.zip on my phone. Here's what the log says;
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set overlay: 'select_storage'
I:Backup folder set to '/external_sd/TWRP/BACKUPS/2041db7d'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/external_sd/cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QN-serranoltexx.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package is for device: serranolte,serranoltebmc,serranoltektt,serranoltexx; this device is serrano3g.
This package is for device: serranolte,serranoltebmc,serranoltektt,serranoltexx; this device is serrano3g.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/external_sd/cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QN-serranoltexx.zip'
Updating partition details...
Iata backup size is 0MB, free: 5377MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'auto'
...done
I:Set page: 'flash_done'
Iperation_end
Click to expand...
Click to collapse
If anyone could help it'd be much appreciated
Thank you.
Hi, there was a problem when restoring the backup of the date section, while I used your recovery. However, this happened on the usual recovery. Error code: 255, can you help?
Code:
==> extracting: //data/data/com.android.chrome/cache/Cache/6ad8d258e3adf0a5_0 (file size 16975 bytes)
==> extracting: //data/data/com.android.chrome/cache/Cache/7d8e6fb25abdc336_0 (file size 5209 bytes)
I:Unable to extract tar archive '/external_sd/TWRP/BACKUPS/30abd4ad/2019-03-05--02-24-22_DriffeX/data.ext4.win000'
Error during restore process.
I:Error extracting '/external_sd/TWRP/BACKUPS/30abd4ad/2019-03-05--02-24-22_DriffeX/data.ext4.win000' in thread ID 0
I:Error extracting split archive.
Error during restore process.
extractTarFork() process ended with ERROR: 255
I:Set page: 'action_complete'
I:operation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'copylog'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Dear XDA and POCO community!
Hope you are all doing good, please note that I just flash to a custom ROM (ARROW OS 11 Official GAPPS Surya) on my POCO X3 NFC using stock global and all the process went smoothly.
1) Unlocked the bootloader
2) Installed TWRP via adb powershell console correctly and booted in TWRP
3)wiped and format the data, cache, etc and I was able to move to Arrow OS
Now the problem is that when I enter TWRP and I tried to root the device this happened and extracted from the recovery log on TWRP
E:unable to open block device /dev/block/loop20: No such device or address
E:unable to open block device /dev/block/loop19: No such device or address
E:unable to open block device /dev/block/loop18: No such device or address
E:unable to open block device /dev/block/loop17: No such device or address
Error installing zip file '/external_sd/Magisk-22.0.zip'
Updating partition details...
I:checking for twrp app
Iata backup size is 4484MB, free: 100792MB.
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Cannot find file /sys/class/timed_output/vibrator/enable
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Cannot find file /sys/class/timed_output/vibrator/enable
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Cannot find file /sys/class/timed_output/vibrator/enable
I:Set page: 'advanced'
I:Cannot find file /sys/class/timed_output/vibrator/enable
I:Set page: 'copylog'
I:Cannot find file /sys/class/timed_output/vibrator/enable
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
Sometimes TWRP reboots back to the main screen of TWRP, sometimes it doesn't and I am unable to root the device, tried Fox recovery as well and having the same issues.
Do you have any workaround or solution to bypass those errors especially the error ''installing zip file magisk'' those blook loop 18,19 I have no idea what is about, I redownloaded Magisk zip like 10 times and is not corrupted.
What I am doing wrong? Ideas?
I appreciate any hand on this so I can happily root the Poco and be back on business since this is the reason I am moving into this new ROM.
Look forward to your ideas/feedback
well, you can always try newer version of TWRP, maybe that'll solve your problems with magisk...
@jeryll Thanks for the headsup, I am going to try it out and see what comes about it, in case it fails again I will provide the log and see if there is someone else facing the same issue or a solution to this.
Thanks!
Unfortunately I tried to root it again with the new TWRP 3.5.1 and tried the method add Magisk root and they all failed this is the recovery terminal logs
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
tw_get_context got selinux context: ubject_r:media_rw_data_file:s0
I:Got default contexts and file mode for storage files.
I:No custom recovery folder found. Using TWRP as default.
I:Attempt to load settings from settings file...
I:InfoManager loading from '/data/media/0/TWRP/.twrps'.
I:No recovery folder found. Using default folder.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/POCO_X3'
I:Mount: Unable to find partition for path '/etc'
I:Copied file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:TWFunc::Set_Brightness: Setting brightness control to 1200
I:Attempt to load settings from settings file...
I:InfoManager loading from '/data/media/0/TWRP/.twrps'.
I:No recovery folder found. Using default folder.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/POCO_X3'
I:Mount: Unable to find partition for path '/etc'
I:Copied file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:TWFunc::Set_Brightness: Setting brightness control to 1200
I:Copied file /cache/recovery/log.gz to /cache/recovery/last_log.gz
I:Starting Adb Backup FIFO
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:No recovery folder found. Using default folder.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/POCO_X3'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'copylog'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copied file /tmp/recovery.log to /external_sd/recovery.log
Copied recovery log to /external_sd/recovery.log.
I:Set page: 'action_complete'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'tools_confirm_action'
I:Set page: 'action_page'
I:Set page: 'tools_flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/tools/addmag.zip'
Verifying zip signature...
I:5 key(s) loaded from /system/etc/security/otacerts.zip
I:Zip signature verification failed: 1
Zip signature verification failed!
Error installing zip file '/tools/addmag.zip'
Updating partition details...
Iata backup size is 4505MB, free: 100086MB.
I:Can't probe device /data/media/0
...done
I:Set page: 'tools_flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'advanced'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'copylog'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I remove the Verification zip and it's the same, I dunno what I am missing or could be the cause that I am unable to root my device...
Ok I managed to get it work, it seems that the version 22 is faulty on POCO X3 NFC global version, I installed 21.4 and now it installed successfully and it is rooted yay!!
I am going to see in the app of magisk to see If I can override and install the latest version #fingerscrossed.
I just did a direct recommended installation in Magisk app and it is installed flawlessly without problems. I am going to leave is a record if someone has the same issue and needs to install Magisk.
Do you guys recommend TWRP or FOX recovery to use in this device? What will be the differences?
Thank you! If needed I can create a new thread for this.
Thanks!
SebixWolf said:
Do you guys recommend TWRP or FOX recovery to use in this device? What will be the differences?
Click to expand...
Click to collapse
well, the differences between latest OFOX and latest TWRP are mostly with added extra functions (for example OFOX has advanced file management (batch operations and such), maybe better error management) and/or design, because the "engine" in both is the same (for example, you can restore backups created in OFOX in TWRP or vice versa)...
SebixWolf said:
Ok I managed to get it work, it seems that the version 22 is faulty on POCO X3 NFC global version, I installed 21.4 and now it installed successfully and it is rooted yay!!
I am going to see in the app of magisk to see If I can override and install the latest version #fingerscrossed.
Click to expand...
Click to collapse
unfortunately that is my experience as well, to a certain point in time, magisk v22 worked correctly on my Poco X3, then it suddenly started behaved very differently, and even if I did find the solution, which worked for me, the extra work with uninstalling magisk v 22 always before installing the new version of ROM was not worth it, I now too use v21.4
my suspicion is that part which magisk v22 always downloading from the internet changed and that is causing for some people the instabilities ...
Have either of you got any further with this.
Did you follow any of the install instructions for v22?
What 'recovery.img' is he referring to? The recovery image for the ROM (there isn't one as far as I know), OFOX recovery image, a different recovery image?
Then someone else in the comments of the magisk thread, said that people with POCOs can just do a normal flash the zip through the custom recovery.
I'm as confused as all get out, I've tried every way described and can't get that patched image to happen.
I can flash it, install the apk, and then I'll get notices saying that 'x wants root privileges' but there is no normal functioning within the actual magisk app.
Don't worry, changed roms, RR to Arrow, and it installs without any issue at all.