Ok here's the story.
My Prophet is, well, an elderly.
I think it's like 5 year old.
I already had to replace touchscreen, battery and the rear speaker.
Anyway my problem now is that I don't have any sound.
Only when I recieve a call or text message I get a ringtone or notification.
Windows media player does not give sound, screen taps etc neither.
Only ringtones give sounds, through rear speaker.
Also when I get a call the earphone speakers doesn't work, the microphone does.
My earphone jack works perfectly so it isn't the audio chip that's broke.
So what i was thinking is that my phone thinks it's using an headset and redirects al sounds to my earphone jack. Only using the rear speaker for ringtones. (so maybe someone could confirm that the ringtone still rings when using an headset)
So does anybody know what the problem is or just help me on the way?
Regard, Paul
I doubt it's 5 years old! Maybe 2?...
Anyway, this is a common issue, the headphone jack is not 'releasing' the sound back to the speaker due to short / stuck connector switch. Blow down it or wiggle the plug.
M.S
Mysterious Stranger said:
I doubt it's 5 years old! Maybe 2?...
Anyway, this is a common issue, the headphone jack is not 'releasing' the sound back to the speaker due to short / stuck connector switch. Blow down it or wiggle the plug.
M.S
Click to expand...
Click to collapse
ok, i was right about the headphone jack making the phone think that it was using headphones when it didn't.
I opened my phone and also opened the casing for the jackplug. I saw that a piecie op copper was bent to far and that it was causing to cancel a circuit wich made the phone think it was unsing no headphones.
When you plug in the headphones, the plug pushes away this copper piece and stops sound.
My solution was to bend the piece back so it makes contact again when the headphones are not plugged in.
Thank you for your advice, it's working great again.
I hook up my phone to my auxiliary in my car and when it's fully plugged in, it only works with one speaker. Same happened when I used headphones as well. If I twist the aux cable a little, I can get it to work somewhat but it's very annoying because pretty much any movement causes it to go back to one speaker. Definitely an annoying issue especially while trying to use my phone as a music player as well. This happen to anyone else? Any type of fix for this?
I have the same exact issues. I don't believe there is a fix without opening the phone up. I have heard of others having the same issues but I haven't done any research on it.
I definitely thought I read about other ppl having this issue when the phone first launched. Also vaguely remember a thread about it too. But thanks for replying and def not opening my phone lol. It'll become a $300 paper weight
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Samsung uses a metric variation on thier male headphone jack. The actual female phono jack on the device is for 1/8" connectors. For some reason headphone/line cables are coming out in a metric size that the manufacturers claim is compatible with a true 1/8" jack and they are, but they are slightly undersized than a true 1/8" jack which can cause a loose connection resulting in channels not working properly.
The tip is also slightly modified on the metric male jacks causing that "not fully inserted issue".
Stick with good name cables/headphones with true 1/8" plugs, and that will stop alot of issues that may arise.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
My son works for verizon and has a GS3 also and he says try shutting off voice commands if you have them on. They cause issues with the head phone jack sometimes.
Settings/language and imput/voice command for apps.
incubus26jc said:
I had this issue as well. It was a problem from the first time i ever plugged headphones in. I thought i was going to have to send it back. It went on for weeks. Turns out, I didnt have them plugged all the way in even though i thought i did. I had to push much harder for them to go all the way in. I felt stupid. Work great now lol. Not saying that you have this problem. Just giving my experience.
Click to expand...
Click to collapse
Will try this next time I can and the other suggestions next time I'm in my car. Just don't want to jam it too far in though and end up breaking it lol. Too bad my cars blue tooth audio doesn't work because then this issue would be solved for most of my audio uses
Exact same problem here. Started within the first week of owning the phone. Cant plug it in any further. I think its a bad jack as every 3.5 mm connector ive tried including the one that came with the phone has the same problem. Found this on ebay http://www.ebay.com/itm/OEM-Flex-Ca...051?pt=LH_DefaultDomain_0&hash=item19d3950c8b Im guessing it will fix the problem but I am waiting to see if its more reliable then what shipped with the phone. I plugged mine in daily at least 5 times. Just using bluetooth now got a belkin bluetooth adapator for 25 from amazon that is tied in with a fm modulator from amazon for 14. A hack on a hack but it works. Not the best audio fidelity but good enough.
I've only been recently using my headphones with this phone, though they have worked fine. That final click for a positive stereo connection is more tough than one might expect for a portable device, but it's quite secure feeling.
With my Sennheiser PX-100 portables, there's no connection problem with this phone and balance between the speakers seems good. The connection needs to be made fully, pushed down flush with the phone edge and any phone protector needs to lie out of range of the connector, IMHO.
I then tested with my over-the-ear cans, but purposefully using a 1/4" to 1/8" adapter whose 1/8" connector was bent, and noticed a slight left channel bias. The bent adapter did seem to have a problem getting 100% into the jack, as well - still, it was pretty much all the way in with only the slightest bit of lift on one side.
So, I would agree with the poster above who mentioned that - if there are differences between your headphone's male connector and the type they happen to use in this phone - even a slight difference in connector vs jack size could cause an issue for playback.
If all male connectors give problems, I guess the possibilities are:
a. Male connector is not being inserted 100% flush to the phone edge
b. Phone cover is interfering with the connector being 100% inserted
c. Bad phone jack or downstream connection
- ooofest
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
chickenmon said:
Pushing it in all the way is not always the fix.. Cant push any of the several headsets I tried in any further. Bad jack add insult to injury the factory charger that came with the phone mysteriously just died wtf .
Click to expand...
Click to collapse
If it won't push in such that the male connector's body is flush with the phone edge, then it is either a bad jack on the phone to begin with (your guess) or all your connectors are somehow incompatible with the new size of jack this phone uses, it would seem.
You're saying the wall charger just died? Might be a warranty on that from Verizon, I'd go to a store or give them a call.
- ooofest
Galaxy s3 headphone jack temp fix
I've had the same problem, tried buying a new cable but audio would only play from one channel
Today playing about I noticed if I pressed the jack slightly to one side it would work, so simple solution, I've bent the metal end of the jack ever so slightly and now it works like a charm with my galaxy s3. No more endlessly messing about playing withthe cable till iit works. Now I say again, vend the jack end slightly till it works, not too much else it might not plug in at all. Hope this helps people out!! Mark
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
I also have exactly the same problem in my car. I have a 3.5mm audio cable which worked fine for the first few weeks and then all of a sudden it stopped playing through the left speaker. At the same time, I also have crackling connection issues when I plug my S3 into a speaker in the kitchen. Headphones seem to work fine though.
It's almost as if some static caused a fault inside the female jack on the S3 given that it worked perfectly for ages and then all the problems came at once.
I tried disabling the voice commands as someone noted above (they were annoying me anyway) and it seemed to make a difference to the crackling but not the reception out of the left speaker - its still very low volume.
I was interested in the post from the guy who said there was a slight difference between 1/8 and 3.5 mm. Which way around is it? The cables I have all claim to be 3.5mm, so are you saying that the S3 has a 1/8th female jack?
I wonder also if there is a 3.5mm to 1/8 inch converter that would do the job. A quick google search didn't throw anything up though.
Recently, My phone was exposed to a LOT of dust while I was driving, and the sennheiser earphones stopped working.
After I returned home, I cleaned my earphone jack with cotton swab and running water, and my earphones too with running water and did a factory reset, so I don't think it's a software issue
But every time I connect my earphones to my phone, The output is from my speaker ;-;
Here's whats funny.
Other earphones work with my phone
These sennheiser earphones works with other devices and when plugged half way in my phone , they also work temporarily when they are wet ...
So ... do I have a phone problem or an earphone problem
Any help is appreciated
An earphone problem.
If other earphone works with your phone then it's your earphones that are ****ed.
The gold plating on the jack might be causing this issue.
Hello. My headphone jack suddenly stopped working. When I plug it in I hear the crackle of the connection come over my headphones or car speakers but then when I try to play the sound is output of the phone speaker. I've checked the jack for lint, dust, etc and it's clean. Any thoughts on what the problem may be?
In full disclosure, I was looking to lift the volume cap on my headphones and did open the mixer_paths.xml but could not find the section on where to do that and therefore did not make any changes at all. This problem did seem to pop up before that though.
Any help is appreciated. Thanks!
Try replacing mixer_paths.xml with my modded one.
http://forum.xda-developers.com/201...-native-volume-boost-apps-mixerpaths-t3217132
If you look on your cord, you can sometimes see either 3 or 4 black rings around the jack. Aux cords and such will typically use 3 rings. I have an aux cord with 4 rings around both sides, and the phone won't play through speakers, either.
Thanks for the replies. Ended up re-flashing my entire phone with the stock ROM and still no go. I am sending the phone back as it's defective. Also in my experimentation I've found that if I hit on my leg a few times the sound does feed out of the headphone jack so it's certainly something hardware related.
Thanks to all.
Hi,
the left channel on the headphone jack is not working.
First I thought it's just dust or litter so I cleaned the jack.
Since that didn't help I bought a replacement headphone jack, opened up the phone and changed it.
But the problem is still there.
(Now I'm hearing a very very low signal on the left channel. (It's only noticeable when I take out the right earplug in a silent room.))
Of course I also tried different headphones. Same result.
Audio over USB-C or bluetooth works fine.
What else could be the problem?
I'd say it's damaged board