Can a modem be flashed on stock Android (5.1.1)? - Galaxy S6 Q&A, Help & Troubleshooting

I am having connection issues with my S6 edge and I am wondering if I can flash another modem on my phone. It hasn't been rooted and is running stock Android. Thanks in advance.
I posted this over on the edge forum but trying here as well in hopes of more views.

Yes, I f you manage to get the correct package, it can be flashed via ODIN without root and tripping KNOX.

davebugyi said:
Yes, I f you manage to get the correct package, it can be flashed via ODIN without root and tripping KNOX.
Click to expand...
Click to collapse
So just load the modem.bin file into CP on Odin and flash it? Anything else I should know?

Nothing that I am aware of.

Related

[GUIDE] Root and Unlock Canadian i337M without tripping Knox

Tested on my Canadian i337M S4 (4.4.2 MVLUFNI2 firmware). Knox was not tripped.
This may work on other S4.
Summary of the Steps:
- Downgrade to special Kernel from W0lfdroid
- Root with TowelRoot
- Flash back 4.4.2 Kernel
- Downgrade to 4.2.2 Modem
- Unlock with RegionLock Away v1.3
- Flash back 4.4.2 Modem
Detailed Steps:
-=FILES REQUIRERD=-
Download these ROMs from SamMobile:
4.2.2 rom for your phone
- Use 7zip to extract MODEM.BIN from it
4.4.2 rom for your phone
- Use 7zip to extract MODEM.BIN from it
- Also use 7zip to extract BOOT.IMG (this is the Kernel), and archive it as a tar file.
-=ROOT=-
Follow this method:
http://www.w0lfdroid.com/2014/09/To...4-S5-and-Note3-Android-4.4.2-NF-or-Later.html
Important: for flashing back the Kernel, the 4.4.2 file from that site may not work properly (causes wifi to behave weird). You need to use the boot.img tar you made earlier.
-=UNLOCK=-
1. Put S4 into download mode by holding Volume Down and Home Button on startup, then press Volume Up
2. Attach Phone using USB cable
3. Start Odin
4. under the Files [Download] section 3rd button (Phone) point to the 4.2.2 modem.bin
5. click on start
6. --- After phone reboots, check it installed correctly by verifying the baseband version is the same as the one you just flashed
7. Once successful run RegionLockAway
8. Next you must install proper modem back using Odin
9. Start Odin
10. under the Files [Download] section 3rd button (Phone) point to the 4.4.2 modem.bin
11. click on start
12. --- After phone reboots, check it installed correctly by verifying the baseband is the same as the one you just flashed
Using Heimdall on Linux to flash stock ROM and getting everything back to original tripped KNOX for me.
Everything was done properly and ROM worked perfect. Oh well.
Tip: (lol)
When flashing stock firmware back to device stick to Windows stock ROM flashing methods. (Odin)
Wish I would of found this info a few weeks ago. niCCe!
ngold thanks
I have a phone from a guy at work it is a Rogers phone KNOX is already tripped the phone is rooted and on 4.4.2 MVLUFNI2 firmware can I still use your unlock method?
And if so which 4.2.2 firmware did you use on Sammobile I don't see any Canadian firmware listed for 4.2.2.
Do you have a link to the RegionLockAway is it just the 1.3 version I'm finding for the Note 3?
stdly said:
ngold thanks
I have a phone from a guy at work it is a Rogers phone KNOX is already tripped the phone is rooted and on 4.4.2 MVLUFNI2 firmware can I still use your unlock method?
And if so which 4.2.2 firmware did you use on Sammobile I don't see any Canadian firmware listed for 4.2.2.
Do you have a link to the RegionLockAway is it just the 1.3 version I'm finding for the Note 3?
Click to expand...
Click to collapse
Yeah you can use this method if KNOX is already tripped. (or you can just use CF-Autoroot as it saves some hassle)
To unlock, the firmware I used was VLUAMDJ . On Sammobile, you'll see it if you filter by Canada (Rogers).
For Regionlock Away 1.3, yes you can use the one posted in the Note 3 forum - http://forum.xda-developers.com/showthread.php?t=2470551
ngold said:
Yeah you can use this method if KNOX is already tripped. (or you can just use CF-Autoroot as it saves some hassle)
Click to expand...
Click to collapse
Thanks ngold,
Will CF-Autoroot unlock the phone it is already rooted?
stdly said:
Thanks ngold,
Will CF-Autoroot unlock the phone it is already rooted?
Click to expand...
Click to collapse
No CF-Autoroot only roots the phone. It trips the Knox, but it's easier. So if you already tripped Knox, that's the best method to root.
ngold said:
No CF-Autoroot only roots the phone. It trips the Knox, but it's easier. So if you already tripped Knox, that's the best method to root.
Click to expand...
Click to collapse
Thanks dude it worked I was worried because I didn't have a working sim card in it but no problems.
I can't flash the modem, bootloader locked?
download what roms? links?
If the phone has a 4.3 or newer bootloader, the phone can't be rooted without tripping knox as far as I know.

OE2 Tar

Was anyone able to get the OE2 Tar file? I don't see it on sammobile. Im sure most of us need it to ODIN update Lol.
kidallstar95 said:
Was anyone able to get the OE2 Tar file? I don't see it on sammobile. Im sure most of us need it to ODIN update Lol.
Click to expand...
Click to collapse
It will be awhile before its released
Would odining stock firmware trip knox?
Sent from my SM-G925P
gtuansdiamm said:
Would odining stock firmware trip knox?
Sent from my SM-G925P
Click to expand...
Click to collapse
No, it does not. I had rooted OCF, and wanted to update to OE2. So I ODIN Stock OCF, without tripping KNOX (I just confirmed) and then updated to OE2, through OTA. I don't really think I need to be rooted at all so far. I'd like to see what's going to happen with Samsung Pay first.
I'd really really like to root and TWRP to flash the custom ROMS. The stock ROM is driving me nuts.
daniel06gt said:
No, it does not. I had rooted OCF, and wanted to update to OE2. So I ODIN Stock OCF, without tripping KNOX (I just confirmed) and then updated to OE2, through OTA. I don't really think I need to be rooted at all so far. I'd like to see what's going to happen with Samsung Pay first.
I'd really really like to root and TWRP to flash the custom ROMS. The stock ROM is driving me nuts.
Click to expand...
Click to collapse
do you have the link to it?
edit found it http://forum.xda-developers.com/showpost.php?p=60175918&postcount=13
kidallstar95 said:
Was anyone able to get the OE2 Tar file? I don't see it on sammobile. Im sure most of us need it to ODIN update Lol.
Click to expand...
Click to collapse
Hey. The tar is now up on Sammobile
Incase you don't want to do the super slow download from Sammobile
http://forum.xda-developers.com/showthread.php?t=3123146

Bricked the S6 SM-920I. I'm at wits' end.

I got the Galaxy S6 yesterday and coming from Nexus 5, I wanted to remove the existing bloatware by flashing the XtrestoLite Deodexed ROM. This one here: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/rom-xtrestolite-deodexed-mod-edition-1-3-t3119968
I'm haven't had much experience in rooting and it's my first time flashing a custom ROM. The phone was running on Android 5.1.1.
Apparently I failed. I started with CF-Root but I wasn't sure if it was done correctly. This was followed by TWRP 2.8.7.1 . Then I tried booting up the phone and the boot logo just loops. I tried to wipe the cache as well as the Delvik-cache through TWRP but it's still the same. Then I tried to flash the stock ROM that I found online but I got the error "Nand Write Start" followed by "Fail". I seem to have tried everything and now I just want to get the phone to work again. It shouldn't be so hard.
Someone help me please :crying:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Gallitho said:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Click to expand...
Click to collapse
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Edit: I managed to do it through initialization. I'll update when it's done.
Edit 2: It worked! Thanks so much!
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
1qazwsx4 said:
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
Click to expand...
Click to collapse
How could I transfer the flashable ROM to the phone when I can't have it boot up to connect to my computer?
Gallitho said:
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
Click to expand...
Click to collapse
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Can you guys help me check if this post has the correct steps or is it missing anything like bootloader and root?
reddit.com/r/GalaxyS6/comments/39wwf6/should_i_install_xtrestolite_rom/cs7b7yq
ztmj96 said:
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Click to expand...
Click to collapse
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Gallitho said:
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Click to expand...
Click to collapse
1. So what is the correct order?
2. Did you have to manually unlock bootloader?
3. And is it a must to install uniKernel in order to root the device?
I have no idea how to proceed now.
This requires a lot more effort than I thought :fingers-crossed:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Gallitho said:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Click to expand...
Click to collapse
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
ztmj96 said:
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
Click to expand...
Click to collapse
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Gallitho said:
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Click to expand...
Click to collapse
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
ztmj96 said:
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
Click to expand...
Click to collapse
Glad to read that, dude!
Yep, our situations are identical and also happened at the same time haha.
Now's time to enjoy! :good:

Question about XtreStoLite (G920F)

Please forgive if i'm posting incorrectly, have been a lurker for a while
I have a Samsung s6 G920F variant, locked onto o2 (UK network) I believe the bootloader is locked also.
I was on Lollipop (with pingpong root) and recently upgraded to Marshmallow 6.1, so my root is obviously gone, and it doesn't seem that there's root right now that works.
I really want to try out the XtreStoLite rom, theoretically could i flash this rom via odin, since its TW based, would it load on without root, and with locked bootloader? I don't really care about Xnox tripping, but I definitely don't want to brick the phone... I'm not sure if the XtreStoLite rom would count as 'stock based' therefore being recognized by the phone as an official operating system? If that sounds correct.
http://download.chainfire.eu/supersu
Link to root your phone correctly.
And Yes you can flash xtrastolite with a custom recovery and without root .
Agreed. ROM has root already. Since you're already on MM, don't flash BL and modem, just ROM & optionally addon. Note that if you replace the stock kernel, you'll probably lose root.
Sent from my SM-G920W8 using Tapatalk
If you lose it, just flash the zip below again
hasnunl said:
If you lose it, just flash the zip below again
Click to expand...
Click to collapse
Thanks!

SM-G920F Stock ROM

Hello!
I need some help on restoring the stock ROM onto my SMG920F. I have tripped Knox using CF-AUTO ROOT. This ended up breaking my phone. So me being me reset it back to factory settings and Installimg twrp recovery.
I then did something absolutely stupid. I wiped everything using the advanced features. So in the end had to Install a custom ROM as I couldnt find any stock roms.
I would like to have an unrooted and stock SMG920F rather than a routed one :/ can you guys help with that.
My current ROM is nemesis
I also have Same Issue plz help us
Isn't there a stock debloated version posted on here? It has the june patch, so it should be almost at the top of threads.
Staritegaming said:
Hello!
I need some help on restoring the stock ROM onto my SMG920F. I have tripped Knox using CF-AUTO ROOT. This ended up breaking my phone. So me being me reset it back to factory settings and Installimg twrp recovery.
I then did something absolutely stupid. I wiped everything using the advanced features. So in the end had to Install a custom ROM as I couldnt find any stock roms.
I would like to have an unrooted and stock SMG920F rather than a routed one :/ can you guys help with that.
My current ROM is nemesis
Click to expand...
Click to collapse
You need
SamFirm 0.3.6.0
Odin Odin3 v3.12.7
Open SamFirm
Paste in Model SM-G920F
Region DBT
Mark Auto
Click to check Update
Mark decrypt auto
then download.
find the odin flashable stock Rom at the same folder SamFirm, unzip.
flash "G920FXXU6ERF5_G920FDBT6ERF1_G920FXXU6ERF6_HOME.tar" in odin as AP
and your S6 will live again
but if Knoxx is tripped, its forever...
Hey! I have found a website that provides stock roms. I have installed one and my phone is factory new. I even get OTA updates and everything is official. the only thing about my phone is that i tripped knox lol. the website is
updato
I then found a "how to install an officialsamsung stock firmware using odin" and followed that guide
The rom I downloaded and flashed using Odin is here (just copy and paste this at the end of updato
firmware-archive-select-model?record=583A76F4915811E89F15FA163EE8F90B
the way i did it was wipe the usual stuff when you want to flash a custom rom but instead you use the stock ROM. only down point is that it puts your recovery back to stock to. So if you want twrp again just flash it and it should be good to go
if i could post links i would so if you want them then message me and i will link things to you.
Yes I just answered my own question. A thanks would be appreciated
hel
Staritegaming said:
Hey! I have found a website that provides stock roms. I have installed one and my phone is factory new. I even get OTA updates and everything is official. the only thing about my phone is that i tripped knox lol. the website is
updato
I then found a "how to install an officialsamsung stock firmware using odin" and followed that guide
The rom I downloaded and flashed using Odin is here (just copy and paste this at the end of updato
firmware-archive-select-model?record=583A76F4915811E89F15FA163EE8F90B
the way i did it was wipe the usual stuff when you want to flash a custom rom but instead you use the stock ROM. only down point is that it puts your recovery back to stock to. So if you want twrp again just flash it and it should be good to go
if i could post links i would so if you want them then message me and i will link things to you.
Yes I just answered my own question. A thanks would be appreciated
Click to expand...
Click to collapse
hi; can you help me? i have my 920f which wan't flash. Please send me the link of the rom which work for you and tel me how you do. This my email [email protected] . thank u

Categories

Resources