Please forgive if i'm posting incorrectly, have been a lurker for a while
I have a Samsung s6 G920F variant, locked onto o2 (UK network) I believe the bootloader is locked also.
I was on Lollipop (with pingpong root) and recently upgraded to Marshmallow 6.1, so my root is obviously gone, and it doesn't seem that there's root right now that works.
I really want to try out the XtreStoLite rom, theoretically could i flash this rom via odin, since its TW based, would it load on without root, and with locked bootloader? I don't really care about Xnox tripping, but I definitely don't want to brick the phone... I'm not sure if the XtreStoLite rom would count as 'stock based' therefore being recognized by the phone as an official operating system? If that sounds correct.
http://download.chainfire.eu/supersu
Link to root your phone correctly.
And Yes you can flash xtrastolite with a custom recovery and without root .
Agreed. ROM has root already. Since you're already on MM, don't flash BL and modem, just ROM & optionally addon. Note that if you replace the stock kernel, you'll probably lose root.
Sent from my SM-G920W8 using Tapatalk
If you lose it, just flash the zip below again
hasnunl said:
If you lose it, just flash the zip below again
Click to expand...
Click to collapse
Thanks!
Related
Hi friends,
I am having Verizon Samsung galaxy S3 I535.
hardware version is i535.10.
Using in india aircel gsm sim on it n works very fine 3G data,call and sms.
I don't know phone is unlocked by some method or factory unlocked phone. ( but in start up screen it shows SAMSUNG CUSTOM WITH UNLOCKED ICON)
I am not able to update to 4.3 update in my phone via Verizon utility software application.
Only OTA Update package is downaloading, update is not installing,
Pls help me to update 4.3
If u want further details i can send you screen shots
uvankarthik said:
Hi friends,
I am having Verizon Samsung galaxy S3 I535.
hardware version is i535.10.
Using in india aircel gsm sim on it n works very fine 3G data,call and sms.
I don't know phone is unlocked by some method or factory unlocked phone. ( but in start up screen it shows SAMSUNG CUSTOM WITH UNLOCKED ICON)
I am not able to update to 4.3 update in my phone via Verizon utility software application.
Only OTA Update package is downaloading, update is not installing,
Pls help me to update 4.3
If u want further details i can send you screen shots
Click to expand...
Click to collapse
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
buhohitr said:
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
If i use Odin to flash and installing custom firmwares, what will be the my phone status?
Again it will work with Gsm? bcz its basically verizon phone i dont want to mess up with basic features.
uvankarthik said:
If i use Odin to flash and installing custom firmwares, what will be the my phone status?
Again it will work with Gsm? bcz its basically verizon phone i dont want to mess up with basic features.
Click to expand...
Click to collapse
If you still want to install custom firmware then DO NOT TAKE THE 4.3 OTA UPGRADE. If you decided to flash custom rom then after flash stock MF1, you need to unlock bootloader, root, flash recovery then flash custom rom (most custom rom already rooted so you probably don't need to root). Your phone status will be CUSTOM.
buhohitr said:
If you still want to install custom firmware then DO NOT TAKE THE 4.3 OTA UPGRADE. If you decided to flash custom rom then after flash stock MF1, you need to unlock bootloader, root, flash recovery then flash custom rom (most custom rom already rooted so you probably don't need to root). Your phone status will be CUSTOM.
Click to expand...
Click to collapse
okay i will not upgrade to 4.3 OTA. i will go for custom rom now my question is,
if am using custom rom on my unlocked i535 will it be locked again to Verizon??
uvankarthik said:
okay i will not upgrade to 4.3 OTA. i will go for custom rom now my question is,
if am using custom rom on my unlocked i535 will it be locked again to Verizon??
Click to expand...
Click to collapse
Yes you can relock again if you want.
buhohitr said:
Download this full stock firmware http://www.androidfilehost.com/?fid=23134718111254196 then use Odin to flash, once done take the OTA and it should be fine. BTW, once upgrade to 4.3 your bootloader will be locked permanently meaning you can't flash custom firmware (rom/kernel/recovery), the only thing you can do is root with saferoot. can be found here http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
Haviing only used Odin when I initially rooted my phone a year ago, I need to ask some specifics on your instructions.
1. Do I boot the phone into Download mode when flashing?
2. Do I flash it by selecting the PDA box and selecting the file there?
3. This will make my phone basically "out of the box" and back to stock recovery, correct?
Thanks in advance.
mkuhl2000 said:
Haviing only used Odin when I initially rooted my phone a year ago, I need to ask some specifics on your instructions.
1. Do I boot the phone into Download mode when flashing?
2. Do I flash it by selecting the PDA box and selecting the file there?
3. This will make my phone basically "out of the box" and back to stock recovery, correct?
Thanks in advance.
Click to expand...
Click to collapse
Your memory stills serve you right...YES to all three.
buhohitr said:
Your memory stills serve you right...YES to all three.
Click to expand...
Click to collapse
Thanks for your quick reply...I hope this solves my issues and gets me back to pure stock Verizon where I can blame then if I have any problems my phone and/or service. :fingers-crossed:
buhohitr said:
Yes you can relock again if you want.
Click to expand...
Click to collapse
kindly share some step by step tutorial guide for installing 4.3 based custom rom
pls suggest which is good custom firmware too
uvankarthik said:
kindly share some step by step tutorial guide for installing 4.3 based custom rom
pls suggest which is good custom firmware too
Click to expand...
Click to collapse
The stock root rom is probably the most stable one. http://forum.xda-developers.com/showthread.php?t=2591895 just follow the instruction on this link.
Want to update a family members phone to 4.4.2. Has Verizon S3 with 4.3, baseband i535vrlf2, currently running cleanrom 8 core edition. Looking for a 4.4.2 stock based rom that will work with the unlocked bootloader, everything I can find requires it to be locked.
sfetaz said:
Want to update a family members phone to 4.4.2. Has Verizon S3 with 4.3, baseband i535vrlf2, currently running cleanrom 8 core edition. Looking for a 4.4.2 stock based rom that will work with the unlocked bootloader, everything I can find requires it to be locked.
Click to expand...
Click to collapse
Doesn't exist because it will not boot without matching firmware and kernel. We're "limited" to custom 4.3 and older Touchwiz roms and AOSP.
Sent from my SCH-I535 using Tapatalk
Thanks. One question, If you upgrade and relock the bootloader, your only losing the option to install custom kernels unless you use a safestrap rom correct? Should still be able to root the phone with towel root or install a prerooted rom?
sfetaz said:
Thanks. One question, If you upgrade and relock the bootloader, your only losing the option to install custom kernels unless you use a safestrap rom correct? Should still be able to root the phone with towel root or install a prerooted rom?
Click to expand...
Click to collapse
You lose access to everything in my previous post. Once upgraded to VRUDNE1 OTA, you cannot downgrade for any reason if you dislike how the phone performs. There is no downgrading to older roms or OTAs, you can only Safestrap flash another VRUDNE1 rom that's it. Doing anything else will brick the phone.
Yes, Towelroot will still root the phone regardless of the software OTA on our phone.
Sent from my SCH-I535 using Tapatalk
Hey guys,
I'm a bit confused on how to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.
What confuses and scares me is the warning about the bootloader and modem...
Anyone did go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
Help would be appreciated, I'm too used to the easy flashing of nexus devices
flash stock 5.1.1 , flash twrp through odin (take from their website to your device),**** flash unikernel I think for root access ****, and then flash xtrestolite from twrp.
**** = maybe not needed, but just in case
creambyemute said:
Hey guys,
I'm a bit confused on how to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.
What confuses and scares me is the warning about the bootloader and modem...
Anyone did go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
Help would be appreciated, I'm too used to the easy flashing of nexus devices
Click to expand...
Click to collapse
Everything is actually mentioned in his thread. Read it and ask if you have more questions.
But short. Flash 5.1.1 bootloader and modem, flash 5.1.1 stock, flash twrp, install XtreStoLite.
Faspaiso said:
Everything is actually mentioned in his thread. Read it and ask if you have more questions.
But short. Flash 5.1.1 bootloader and modem, flash 5.1.1 stock, flash twrp, install XtreStoLite.
Click to expand...
Click to collapse
Why would we flash the bootloader and modem first? Wouldn't the 5.1.1. stock include it all?
is350 said:
Why would we flash the bootloader and modem first? Wouldn't the 5.1.1. stock include it all?
Click to expand...
Click to collapse
I have absolutely no idea. I couldn't get on 5.1.1 before that, but I may have different something wrong. But it can't hurt, to do the above.
Judy follow the instructions on the thread.
Hey guys i have a problem with 5.1.1 and twrp 2.8.7.1: when i reboot in recovery i can't see my phone in windows explorer and i'm unable to copy the rom on the phone. Do you have the same issue?
I got the Galaxy S6 yesterday and coming from Nexus 5, I wanted to remove the existing bloatware by flashing the XtrestoLite Deodexed ROM. This one here: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/rom-xtrestolite-deodexed-mod-edition-1-3-t3119968
I'm haven't had much experience in rooting and it's my first time flashing a custom ROM. The phone was running on Android 5.1.1.
Apparently I failed. I started with CF-Root but I wasn't sure if it was done correctly. This was followed by TWRP 2.8.7.1 . Then I tried booting up the phone and the boot logo just loops. I tried to wipe the cache as well as the Delvik-cache through TWRP but it's still the same. Then I tried to flash the stock ROM that I found online but I got the error "Nand Write Start" followed by "Fail". I seem to have tried everything and now I just want to get the phone to work again. It shouldn't be so hard.
Someone help me please :crying:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Gallitho said:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Click to expand...
Click to collapse
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Edit: I managed to do it through initialization. I'll update when it's done.
Edit 2: It worked! Thanks so much!
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
1qazwsx4 said:
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
Click to expand...
Click to collapse
How could I transfer the flashable ROM to the phone when I can't have it boot up to connect to my computer?
Gallitho said:
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
Click to expand...
Click to collapse
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Can you guys help me check if this post has the correct steps or is it missing anything like bootloader and root?
reddit.com/r/GalaxyS6/comments/39wwf6/should_i_install_xtrestolite_rom/cs7b7yq
ztmj96 said:
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Click to expand...
Click to collapse
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Gallitho said:
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Click to expand...
Click to collapse
1. So what is the correct order?
2. Did you have to manually unlock bootloader?
3. And is it a must to install uniKernel in order to root the device?
I have no idea how to proceed now.
This requires a lot more effort than I thought :fingers-crossed:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Gallitho said:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Click to expand...
Click to collapse
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
ztmj96 said:
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
Click to expand...
Click to collapse
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Gallitho said:
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Click to expand...
Click to collapse
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
ztmj96 said:
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
Click to expand...
Click to collapse
Glad to read that, dude!
Yep, our situations are identical and also happened at the same time haha.
Now's time to enjoy! :good:
Hi,
I have a Note edge N915W8 which i updated to 5.1.1 the moment it became available on Sammobile (big mistake). as everyone knows, i lost root in the process. And no root availble at this time.
Important history of the phone:
I acquired the device from a friend that had rooted it when it was in its original stock 4..4.4 config. He then tried to flash a custom rom which ended up in a bootloop which he was unable to recover from because there wasn't a stock rom available at the time. Long story short, I ended up with a bootlooped Note Edge and after a week i managed to acquire someones backup zip from XDA -- which i then used to free my device from the loop and function properly with root.
I got too eager and flashed the 5.1.1 without reading up on it and lost root.
So, i was hoping there would be a way or method that i could use that would allow me to use that same custom recovery backup of 4.4.4, only this time be able to flash it through odin on my stock 5.1.1
Any advice would help.
Thanks
From what I know once you take 5.1 update you cant backroll to 4.4.4.
BOOTLOADER was patch'd BY the GREATS to throw another wrech in our plans!
And also I do blv there is ROOT for 5.1 but it trips knox & you have to install twrp thru Odin then flash SUPERSU & BEASTMODE Kernel that allows root and then take root
READ THIS
http://forum.xda-developers.com/not.../root-supported-kernel-5-1-1-testers-t3176651
Ickyz said:
From what I know once you take 5.1 update you cant backroll to 4.4.4.
BOOTLOADER was patch'd BY the GREATS to throw another wrech in our plans!
And also I do blv there is ROOT for 5.1 but it trips knox & you have to install twrp thru Odin then flash SUPERSU & BEASTMODE Kernel that allows root and then take root
READ THIS
http://forum.xda-developers.com/not.../root-supported-kernel-5-1-1-testers-t3176651
Click to expand...
Click to collapse
Thanks I appreciate it.
just out of curiosity, Are you running a rooted 5.1? or have you heard any feedback about this method
Sent from my SM-N915W8 using X D A Free mobile app
itsmemikeeey said:
Thanks I appreciate it.
just out of curiosity, Are you running a rooted 5.1? or have you heard any feedback about this method
Sent from my SM-N915W8 using X D A Free mobile app
Click to expand...
Click to collapse
No I cant get Twrp 2 flash thru Odin as md5 everything I download comes out as IMG & that does me no good