Hi to all,
I'm a new user of tf300t I am trying some of custom rom but in all ROM tested my hdmi output doesn't work.
I tryed on three different TV and the result is the same:
- TV detect HDMI cable connection
- TV screen remain black
I have tryed OMNIROM 4.4.4, 5.1.1 katkiss #30 and some others but hdmi never working.
I have to enable HDMI output in some way?
There is someone that can suggest to me a ROM with hdmi output correctly working?
I read other post with issue on HDMI but none as an answer at my issue
I'am sure my cable and TV is ok because all works correctry with my PC and sony videocamera.
Thanks to all in advanced
Regards
Roberto
Related
So connecting my TF to a bravia w5500 does noting but dmesg shows hdmi handshake error.
In simple words the TF cant get a edid to know what kind of hardware is connected.
But who is ad fault here, my sony bravia or TF .
As note i only have problems with the TF every thing els is working with my bravia.
And i have a 1.4 cable (direct)
any one have same problems and dmesg ( i2c error reading edid )
Edit , a 1.3 cable does not fix it
Try plugging it to another HDMI devices and lets see what you get in dmesg.
I should try my HDMI port too to see how it works.
cesarramsan said:
Try plugging it to another HDMI devices and lets see what you get in dmesg.
I should try my HDMI port too to see how it works.
Click to expand...
Click to collapse
tested with some tv's all working
All bravia w5500 do not work , so whats up with this ( dont know if more bravia have this problems )
Try changing HDMI setup options of your TV, from a quick glance at the user manual of your TV, I can see there are lots of options for HDMI, some are specific to connecting Sony devices, try turning those off. My TV doesn't have that many HDMI options and it worked straight away.
Works fine with my Visio. I need to adjust the HDMI scaling on my TV but other than that, it's great!
Seems to work with my Bravia HX800.
Whats this HDMI scaling ?
Tested it last night. Connected my TF to my yamaha receiver's hdmi port. My only complaint is the audio volume is low and i have to crank up the receiver.
tf101 and Sony Bravia KDL 40 W 5500
Yes i have the configuration Sony Bravia KDL 40 W5500 and transformer, but with
the new cable that i receive today from ebay, the screen of my tv is black grrrrrr
but oon bravia near the icon hdmi, i can see an blue arrow just when i plug my tf.
this arrow disappear when i unplug the tf, then this cable is good but the screen is
always black !!!!!
somebody have a solution ?
Your problem is basically what this thread turned into:
http://forum.xda-developers.com/showthread.php?t=1111672
We're looking into it but it looks like it may be a problem in the kernel.
Well I have Brawia W5500 and also my HDMI does not work...
I have an off brand Auria tv but it works great with all my devices. I can't get hdmi out through my receiver or directly to the TV. The TF shows the mini hdmi connected and blacks the screen. I see on another thread there is a known issue with some TVs and ASUS has acknowledged it.
I have a Z4500, the HDMI from the TF works. But the picture is not great quality, the upscaling of the TF from SD to 720p is very poor.
Also trying to find out if HDMI supports dual display output? has anyone had any luck?
So still nothing?
Hi there, I've seen some issues reported with wifi and HDMI, however, none that seem to match the symptoms I've got. Famous last words...
I have two Asus eeePad Transformers. One is at 3.2 and the other recently updated to 3.2.1
I have a mini-HDMi to HDmi cable plugged into my HP monitor via an HDMi hub as follows:
- initially a direct attach to the monitor gets a cable fault on the monitor
- via the hub and nothing else activated, HDMI "bounces" between connected and not
- Powering on my DVD player into the hub, gets HDMI working a treat.
From looking at other posts, maybe I need a different cable, anyway that;s not the issue here, just history.
One of my TF101's was updated to 3.2.1 Now that device has issues with HDMI connected. It took me ages to debug this too:
- If HDMI cable in use, WiFi "stalls/stops". e.g. web pages don't load, WiFianalyser shows no signals etc.
- When screen saver kicks in and HDMI turns off web page loads complete
Other TF101 on 3.2 is still fine.
TF101 at level 3.2.1 was connected to the charger with no difference.
Any help greatly appreciated as I have to fiddle quite a lot to use HDMI now
No problem on my TF with WiFi when HDMI connected. I watch Netflix all the time while connected to TV via HDMI cable. I have a B60 model on 3.2.1 .
Thanks nonpaq, seems like I need to know more about the level of support with the cable etc. Good to know it's not a solid problem.
Problem with hdmi and wifi
hello,
i have same isuue when hdmi connected.... wifi go away, not all the time, but its happen specially when whatch youtube movies .....
I have the same problem. I Use the revolver-rom (3.7).
I had the same problem , and i had change the canal of the wifi , and all ok
I'm on the stock ROM and have the same issue on 3.2.1. Seems to be intermittent - Works some of the time. I have noticed that the Wi-Fi signal always looks strong but web pages won't load either. Other posts seem to suggest that you need a 1.3 HDMI cable. I have a 1.3a (whatever that means)
Hdmi disables wifi
Same here. Have a Tf101. Updated to ICS two weeks ago. A week ago i bought new headphones noticed the left earphone not working. Tested with other headseats same issue. Did a factory reset, same issue. This week whenever i plug in the HDMI the internet connection slows to unusable.
I think its all hardware related. Time to send it back to the manufacturer and pick up that IPAD 2 I was offered today.
hi all,
Since the Search button isn't working atm i make a new threat... ('Search is temporarily unavailable. We apologize for the inconvenience.')
So my question is:
Does anyone has connected the TF300T Tab to a external screen ? is the resolution good? when i want to play Dead Trigger , would i have a lot of benefit with a external screen?
I have a 21" monitor with VGA and DVI , i found online a Micro HDMI to VGA cable , so that should work right ?
Aslo would external USB hub's work on the USB-port on the TF300T ?
Thank you
yes you can use hubs but they won't do you really no good if you have a dock
Tf300t cm10
Hi Everybody,
When connecting my LG Optimus G (CM 11) to my Asus 1440×900 screen through 1) an MHL adapter 2) an HDMI cable and 3) an HDMI->DVI converter, I keep getting a 640px x 480px output regardless of the resolution set. I've already tried three of the resolution changer programs available on google play. When setting different resolutions, changes take effect on the screen of my mobile, but the image of the secondary screen is always fitted into a 640×480 "frame". Then this is stretched on the monitor.
When I connect my mobile to an HDMI-capable monitor through the MHL adapter and an HDMI cable, the phone can recognise the resolution of the monitor, and no such problems occur.
When I connect my computer to my Asus monitor through the setup described above (MHL adapter, HDMI cable, HDMI/DVI converter), resolution is fine.
Do you think this problem is software-related? Can I somehow force the MHL output to the resolution of my monitor?
Thank you for your help in advance.
Please post in Freaking Annoying Questions (aka FAQ)- LG Optimus G(Intl) so that one the experts for your device may be of help.
It is needed to use Android smarthone (Mate 8) for checking HDMI inputs and outputs (check for working in/out)
I know that is the possible to use MHL adapter as HDMI output.
There is something else solutions to check that HDMI IN and HDMI OUT are working ? For use Mate 8 as portable HDMI monitor and/or signal AV HDMI source ?