Firmware corrupt when battery Re-inserted - Micromax A110

my micromax A110 firmware corrupted whenever battery removed and re-inserted.
just logo appear then hang.
it is again working after recovery flash (i kept rom.zip always in sd-card)
i m using ultimate galaxy s4 rom
pls advice whether it is hardware or software problem?
thx in advance

Use other ROM ..
Sent from my CINK KING using Tapatalk

Related

[Q] Need Help Unbricking Micromax A110

Hi Guys,
I need help with unbricking my A110, i was trying to flash few roms and i ended up bricking it.
I tried various flash tools(Smart Phone Flash Tools) but all useless.
please help me to bring it to its former glory.
Cannot install new rom it says aborted installing cannot open zip.
ans2007kumar said:
Hi Guys,
I need help with unbricking my A110, i was trying to flash few roms and i ended up bricking it.
I tried various flash tools(Smart Phone Flash Tools) but all useless.
please help me to bring it to its former glory.
Cannot install new rom it says aborted installing cannot open zip.
Click to expand...
Click to collapse
Please search in the Main Thread http://forum.xda-developers.com/showthread.php?t=1960080
1.Take battery Out of phone.
2. Charge battery with Universal charger(search ebay ) for 5 to 10 mins. Ensure both the Red and blinking lights of universal charger glows/blinks well during this time.
3. Put back battery in phone. If possible keep the phone in power off mode.
4. Plug the charger wait for sometime and see your battery starts charging up.
Connect the phone switched off mode and flash the V2 ROm
ans2007kumar said:
Hi Guys,
I need help with unbricking my A110, i was trying to flash few roms and i ended up bricking it.
I tried various flash tools(Smart Phone Flash Tools) but all useless.
please help me to bring it to its former glory.
Cannot install new rom it says aborted installing cannot open zip.
Click to expand...
Click to collapse
Can u give me more details like have u flashed a custom recovery and if yes which one and some more details which would be helpful?
IT HAPPNED TO ME ALSO TRY FLASHING ADT ROM USING ADT
android download tool
Thankx friend for reply i got out of that mess by flashing DrBhokali JB ROM by mujahidali
DEVS PLS HELP ME... I WANT TO KNW HOW TO GET INTO STOCK SO THAT I CAN GET BAK MY WARANTY FOR SECURITY...
PLS GV ME A LINK HOW TO GET STOCK????
PLS PLS PLS
Sent from my Samsung GT-S9081 using xda app-developers app
Sent from my Samsung GT-S9081 using xda app-developers app
coolpartha said:
DEVS PLS HELP ME... I WANT TO KNW HOW TO GET INTO STOCK SO THAT I CAN GET BAK MY WARANTY FOR SECURITY...
PLS GV ME A LINK HOW TO GET STOCK????
PLS PLS PLS
Sent from my Samsung GT-S9081 using xda app-developers app
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Just flash stock v2 Rom..
Sent from my Micromax A110 using xda premium

Acer A1-810 boot loop

Hi All
Sorry if this has been answered before but I couldn't find it. I initially rooted my device successfully, then recently restarted and is now in a bootloop.
I'm not exactly clear on what the process is to fix this, so any help would be appreciated. I've tried holding the volume key and power button to get into the boot menu. But not really sure what files I need or what to do next.
Thanks in advance
Bro u should try to boot into recovery and do factory reset and it will solve ur problem
if further exist then u should have custom rom or original rom or firmware to came ur mobile back 2 life
Sent from my Micromax A110Q using XDA Premium 4 mobile app
[email protected] said:
Bro u should try to boot into recovery and do factory reset and it will solve ur problem
if further exist then u should have custom rom or original rom or firmware to came ur mobile back 2 life
Sent from my Micromax A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your reply. I have tried factory reset and still stuck in boot loop.
Where can I download the rom or firmware for a1-810? I've tried searching everywhere, only one I found on http://forum.xda-developers.com/showthread.php?t=2240029 was for RV07RC01_PA_CUS1 version and didn't work. The acer website does not contain them.
Does anyone have a link to RV18RC07_WW_GEN1 firmware update?
Guys, anyone know where I can download Acer firmware files? Surely, they must exist somewhere and someone must know? No luck on the main website, there was a link in this forum for RV18RC07 but the link appears to be dead.
Bro u have installed cwm if yes then u can backup ur stock rom and then restore it.
Sorry I don't have firmware link or file
Sent from my Micromax A110Q using XDA Premium 4 mobile app
Fix a1-810 bootloop
Check if this thread helps
community.acer.com/t5/Tablets/Help-me-acer-iconia-a1-810-bootloop/td-p/132007

[Q] unable to flash custom Rom and update cwm

Dear Devs.
My MMX A110Q plus(stock v2) is unable to flash any custom ROM. My device is rooted and CWM v5.5.0.4 is running. I have tried updating recovery to v6.0.1.2 and v6.0.4.7 by mobile uncle tools and SP flash tools v3.1312. In both cases updation or flash is success but it always fails too boot on recovery mode. After selecting recovery mode, Canvas boot logo will blink twice and will boot normally to system.
Fashing of custom ROM like CanvaS4, suvi v16 or Miui 5 will get success but while booting, Canvas boot image will keep booting.
plz help.....help.
Gune Soram said:
Dear Devs.
My MMX A110Q plus(stock v2) is unable to flash any custom ROM. My device is rooted and CWM v5.5.0.4 is running. I have tried updating recovery to v6.0.1.2 and v6.0.4.7 by mobile uncle tools and SP flash tools v3.1312. In both cases updation or flash is success but it always fails too boot on recovery mode. After selecting recovery mode, Canvas boot logo will blink twice and will boot normally to system.
Fashing of custom ROM like CanvaS4, suvi v16 or Miui 5 will get success but while booting, Canvas boot image will keep booting.
plz help.....help.
Click to expand...
Click to collapse
You seem to have flashed canvas 2's CWM and roms. These two are very different phones. Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
you are using different canvas rom your phone Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
Adil Rishi said:
you are using different canvas rom your phone Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
Click to expand...
Click to collapse
Why are you repeating the solutions? trying to get 10 posts or what ? :|
My frnd was installing a rom @ 5% battery... n it completed but suddenly went off...... now its dead I cant even reach t recovery mode .. tried charging t battery on othr phones but still doesnt respond. Pls help me.. my id is [email protected]m
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
My frnd was installing a rom @ 5% battery... n it completed but suddenly went off...... now its dead I cant even reach t recovery mode .. tried charging t battery on othr phones but still doesnt respond. Pls help me.. my id is [email protected]
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Now that's just stupid... the instructions clearly say you must have more than 70% battery to flash a rom.... use sp flash tools to flash original rom (see the unbrick method)
I managed to put t stock rom.. now he has a new problem... it says imei invalid.. On his canvas 2 plus..n no sims r getting detected because of that.... wat 2 do???
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
I managed to put t stock rom.. now he has a new problem... it says imei invalid.. On his canvas 2 plus..n no sims r getting detected because of that.... wat 2 do???
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Check out the procedure for permanent imei fix or use mtk tools as a temporary solution.
Sent from my C2305 using XDA Premium 4 mobile app
I tried that.. it finishes ... says ok but still it shows imei invalid... ?? donno what to do...
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
I tried that.. it finishes ... says ok but still it shows imei invalid... ?? donno what to do...
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Check if your device has a baseband in about phone.
Nooo it shows unknown......
Sent from my GT-N7100 using XDA Free mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 02:47 AM ----------
Baseband is unknown..
Sent from my GT-N7100 using XDA Free mobile app
I sorted it out!! Thanks fr all the help:thumbup:
Sent from my GT-N7100 using XDA Free mobile app

my bricked micromax A110 is almost dead.

non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
Try to flash stock rom through sp tool
Sent from my CINK KING using Tapatalk

Help! stuck at bootloop

i have micromax canvas juice 2 (aq5001). i was trying to unlock my bootloader, after unlocking my bootloader my phone got stuck in bootloop. help please how can i recover from it. i don't have stock rom or any backup too.
sparksthedev said:
i have micromax canvas juice 2 (aq5001). i was trying to unlock my bootloader, after unlocking my bootloader my phone got stuck in bootloop. help please how can i recover from it. i don't have stock rom or any backup too.
Click to expand...
Click to collapse
Bro flash your stock rom or flash any costume rom of micromax juice 2 .
You can find costume ROMs for your device in XDA & www.costumromworld.blogspot.com
Sent from my AQ5001 Canvas Power using XDA Premium 4 mobile app
hpsabb said:
Bro flash your stock rom or flash any costume rom of micromax juice 2 .
You can find costume ROMs for your device in XDA & www.costumromworld.blogspot.com
Sent from my AQ5001 Canvas Power using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thx! for the help bro but problem was solved next day of the issue. somehow from stock recovery clearing cache or something like that (i tried all options), problem got fixed.
flashing rom was not possible because i didn't had custom recovery neither my phone was bootable so that i can flash recovery through mobile uncle tool apk. i got stuck in that problem because in those days i was trying to make one custom for that phone myself .
i checked your website, you are doing amazing work, i hope you will produce more stable roms for this phone in future. i am still using this phone and i really regret buying it, stock rom sucks. if you got some time teach me as well to make one custom rom especially for this one phone.

Categories

Resources