my bricked micromax A110 is almost dead. - Micromax A110

non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro

Try to flash stock rom through sp tool
Sent from my CINK KING using Tapatalk

Related

regarding celkon A85

i rooted my celkon A85 with z4root which i downloaded from xda and uninstalled certain system apps.I also uninstalled my default launcher and made launcher 8 as a system app using system/appmover.I installed pimp my rom and i did something which i dont remeber ..may be i changed few settings..then it asked for rebbot and i pressed ok...then it never started and it also heated up a little bit on the battery side..
Not knowing what to do i had somehow managed to do factory reset using android multitool..now it is not starting..the startup logo celkon mobiles comes and nothings happens..it is in bootloop i think..the logo comes on and goes off repeatedly
can anyone help me out..the sad thing is i could not find a recovery for my phone (celkon A85).
any suggestions are welcome..please help me out ..
Please post stock recovery or cwm recovery for my celkon a40 with explaination
Sent from my TA-FONE A37 HD using XDA Premium 4 mobile app
Flash your phone with Ur Stock ROM with SP flash tool
Sent from my A24 using XDA Premium 4 mobile app
vithlani2 said:
Flash your phone with Ur Stock ROM with SP flash tool
Sent from my A24 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i tried with it but could not flash.. could you explain little bit of how to use that tool and if possible provide stock rom
I hadnt use this tool for ur device but I had flashed many device with this tool, so I can't explain u step by step, but I will help u when u can't understand what to do....

[Q] unable to flash custom Rom and update cwm

Dear Devs.
My MMX A110Q plus(stock v2) is unable to flash any custom ROM. My device is rooted and CWM v5.5.0.4 is running. I have tried updating recovery to v6.0.1.2 and v6.0.4.7 by mobile uncle tools and SP flash tools v3.1312. In both cases updation or flash is success but it always fails too boot on recovery mode. After selecting recovery mode, Canvas boot logo will blink twice and will boot normally to system.
Fashing of custom ROM like CanvaS4, suvi v16 or Miui 5 will get success but while booting, Canvas boot image will keep booting.
plz help.....help.
Gune Soram said:
Dear Devs.
My MMX A110Q plus(stock v2) is unable to flash any custom ROM. My device is rooted and CWM v5.5.0.4 is running. I have tried updating recovery to v6.0.1.2 and v6.0.4.7 by mobile uncle tools and SP flash tools v3.1312. In both cases updation or flash is success but it always fails too boot on recovery mode. After selecting recovery mode, Canvas boot logo will blink twice and will boot normally to system.
Fashing of custom ROM like CanvaS4, suvi v16 or Miui 5 will get success but while booting, Canvas boot image will keep booting.
plz help.....help.
Click to expand...
Click to collapse
You seem to have flashed canvas 2's CWM and roms. These two are very different phones. Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
you are using different canvas rom your phone Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
Adil Rishi said:
you are using different canvas rom your phone Flash cwm of canvas 2 plus and roms of only this device available in android development section in the forum.
Click to expand...
Click to collapse
Why are you repeating the solutions? trying to get 10 posts or what ? :|
My frnd was installing a rom @ 5% battery... n it completed but suddenly went off...... now its dead I cant even reach t recovery mode .. tried charging t battery on othr phones but still doesnt respond. Pls help me.. my id is [email protected]m
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
My frnd was installing a rom @ 5% battery... n it completed but suddenly went off...... now its dead I cant even reach t recovery mode .. tried charging t battery on othr phones but still doesnt respond. Pls help me.. my id is [email protected]
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Now that's just stupid... the instructions clearly say you must have more than 70% battery to flash a rom.... use sp flash tools to flash original rom (see the unbrick method)
I managed to put t stock rom.. now he has a new problem... it says imei invalid.. On his canvas 2 plus..n no sims r getting detected because of that.... wat 2 do???
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
I managed to put t stock rom.. now he has a new problem... it says imei invalid.. On his canvas 2 plus..n no sims r getting detected because of that.... wat 2 do???
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Check out the procedure for permanent imei fix or use mtk tools as a temporary solution.
Sent from my C2305 using XDA Premium 4 mobile app
I tried that.. it finishes ... says ok but still it shows imei invalid... ?? donno what to do...
Sent from my GT-N7100 using XDA Free mobile app
gahan0035 said:
I tried that.. it finishes ... says ok but still it shows imei invalid... ?? donno what to do...
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Check if your device has a baseband in about phone.
Nooo it shows unknown......
Sent from my GT-N7100 using XDA Free mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 02:47 AM ----------
Baseband is unknown..
Sent from my GT-N7100 using XDA Free mobile app
I sorted it out!! Thanks fr all the help:thumbup:
Sent from my GT-N7100 using XDA Free mobile app

Firmware corrupt when battery Re-inserted

my micromax A110 firmware corrupted whenever battery removed and re-inserted.
just logo appear then hang.
it is again working after recovery flash (i kept rom.zip always in sd-card)
i m using ultimate galaxy s4 rom
pls advice whether it is hardware or software problem?
thx in advance
Use other ROM ..
Sent from my CINK KING using Tapatalk

[Bricked] [help] want to get back to stock rom

I was using spice mi-515
I don't know what to do, my device was showing unknown error in Chinese lang. I tried reinstalling ROM, but ended up breaking my recovery now the device boots till the spice logo,
Can anyone tell me how do I bring it back to life, maybe if I can somehow change my recovery to stock...
Please, I'll be really thankful of you guys
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app
Your phone is MTK so you can reinstall the stock firmware using SP-flashtool.
Try this: http://free-mobile-solutions.blogspot.it/2015/09/how-to-flash-spice-mi-515-mtk.html?m=1
I have got it in hard brick now
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app
Have you flashed the correct firmware?
I flashed two custom Roms, and one stock, so many times
They time I flash a ROM the device format the /system /data /cache before Even booting up
And now , I can't even see the charge animation, boot logo
One guy said it's hard bricked
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app
If the PC recognize it is recoverable. So search on internet your STOCK FIRMWARE and not a stock ROM or custom ROM
Okay, its sometimes getting recognized and sometimes not.. Hehe
I'll look up for the firmware
Is firmware and ROM are different things?
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app
For firmware I mean the SP flash tool flashable firmware that is different from a ROM. The SP flash tool flashable firmware is the firmware that the manufacturer use in the recovery center.
ash cutie said:
Okay, its sometimes getting recognized and sometimes not.. Hehe
I'll look up for the firmware
Is firmware and ROM are different things?
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app
Click to expand...
Click to collapse
OK, when is it being recognized and what is it being recognized as?
Is it recognizing it and then not recognizing it even though you haven't disconnected? Is it doing that while connected the whole time?
What are you doing different from when its recognized and when it isn't?
Sent from my SCH-I535 using Tapatalk
The thing that is recognized probably is the preloader. If yes you are able to flash the stock firmware with SP flash tool
I have been trying the method which includes soldering "gnd" and "colo/kolo/ckolo"
And my pc still recognize the phone but it recognizes it as "mobistel DA USB VCOM Port (COM16)
and is shown in ports
I think i should be able to re-flash it by forcing it into download mode by soldering points
Thanks for your help, I'm still hoping for this phone to revive
Sent from my Coolpad 2 Mi-496 using XDA Free mobile app

Help! stuck at bootloop

i have micromax canvas juice 2 (aq5001). i was trying to unlock my bootloader, after unlocking my bootloader my phone got stuck in bootloop. help please how can i recover from it. i don't have stock rom or any backup too.
sparksthedev said:
i have micromax canvas juice 2 (aq5001). i was trying to unlock my bootloader, after unlocking my bootloader my phone got stuck in bootloop. help please how can i recover from it. i don't have stock rom or any backup too.
Click to expand...
Click to collapse
Bro flash your stock rom or flash any costume rom of micromax juice 2 .
You can find costume ROMs for your device in XDA & www.costumromworld.blogspot.com
Sent from my AQ5001 Canvas Power using XDA Premium 4 mobile app
hpsabb said:
Bro flash your stock rom or flash any costume rom of micromax juice 2 .
You can find costume ROMs for your device in XDA & www.costumromworld.blogspot.com
Sent from my AQ5001 Canvas Power using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thx! for the help bro but problem was solved next day of the issue. somehow from stock recovery clearing cache or something like that (i tried all options), problem got fixed.
flashing rom was not possible because i didn't had custom recovery neither my phone was bootable so that i can flash recovery through mobile uncle tool apk. i got stuck in that problem because in those days i was trying to make one custom for that phone myself .
i checked your website, you are doing amazing work, i hope you will produce more stable roms for this phone in future. i am still using this phone and i really regret buying it, stock rom sucks. if you got some time teach me as well to make one custom rom especially for this one phone.

Categories

Resources