Hello all.
I'd like to know if there's any custom roms for Karbonn A2+. I'm already guessing the answer is a "No" so I'd like to know if/how I can port any rom with JB firmware and any CWM to my device (Please tell me what rom should I take to port
The device runs on 4.0.4 ICS, with 1ghz 256mb ram, and a 4" WVGA capacitive touch screen. I've rooted it via Framaroot and am using an additional 1gb of swapped ram.
Thanks in advance.
Bump, is there anyone who can point me to the correct guide to follow?
Your phone?
What is your phone?
I mean what phone are you using?
the model and the brand?
I'm facing the same problem.
hardware config.of a2+are- mt6575 with kernel 3.0.13
brand- alps , model- A2+
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
shantz said:
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
Click to expand...
Click to collapse
Interesting, could you please dump the rom?
"Jellyfish"?
Root & cwm for karbonn a2+
It is a simple procedure, but it took long time for me to make it work.
Points to consider
a. After flashing my phone didn’t boot. I just flashed only the recovery, I think that would caused the problem, later I re-flashed the stock rom boot img separately).worked !
b. Instead of backup copy I tried with the stock rom imgs, It worked for me. If you don’t want to lose any data please use your phone backup copy img files.
c. I am not a developer & don’t know how the stuffs work inside the mobile, with the help of XDA contributors & developers forum messages, I was able to do something.
d. Please do read the rooting & flashing guides thoroughly.
e. Please don’t panic if something goes wrong. Stock rom is available, flash it & you get your mobile back.
ROOTING & BACK UP
1.Frama root will give you the root rights ! - http://forum.xda-developers.com/showthread.php?t=2130276
Download & Install - open it choose install super user, then click "boromir" success message will appear, click ok and reboot your phone. You can see a message "android is updating" after you reboot your phone.
2. Dowload MTKdroid lastest version (older version also fine)-sorry I couldn’t find any working links
Backup your stock rom using MTK droid tool, before making any changes to the stock OS. MTK droid tool may ask you to root again. Please read rooting and flashing instructions thoroughly before doing any changes.
a. Install MTKdroid tool in your pc & open it, If the tool asks you to root, click root, in couple sec or mins yellow signal will turn green.
b. Click on the “Root,backup,recovery & then click backup – Please wait till the process completes
If the message says “end with error” – The backup copy will not help us to re-flash the OS
(I tried many times, but I am not able to flash the backup copy with SP flash tool, gives me some error.
(for making CWM the above copy is fine, because I hope there won’t be any error when the software creates a backup for boot.img & recovery.img)
c. Ok assuming that there is no error, the next step is Click on the button “To prepare blocks for Flash tool” – wait till it completes. This process will gives us the entire copy of the rom to flash it with SP flash tool – Can find the backups in MTKdroid tools /backups/ Karbonn-A2+_number _date_backup_ folder/file to flash tool. (MTKdroid tool is required to create CWM, so don’t close the MTKdroid tool)
d. No stock roms were available when I was testing that time, so I ended up with the service center. Thanks to XDA member “Forever Alone”. Now working stock rom is available.
3.CWM CREATING & PORTING
a. Select “To choose the boot.img file & click recovery & boot. Software will ask you to select the boot.img. Select the boot.img from the backup copy in MTKdroid tools /backups/Karbonn-A2+_ _backup_ /file to flash tool.
b. Click Yes - To make CWM automaticllay
C. Click yes - If phone isn't loaded, it is ness to flash this file...to phone? Software may show a write error, just leave it for now.
e. Click NO - Install created recovery to phone ?
Copy of the recovery & boot img will be in MTKdroid tools /recovery
Now CWM has been created & that needs to flashed via SP flash tool
4. Flashing CWM recovery
Download SP flashtool - http://forum.xda-developers.com/showthread.php?t=1982576
Copy the scatter file from Mtkdroid backup folder to mtkdroid recovery folder to avoid confusion in selecting the image files.
Open SP flashtool – Select the scatter file from mtkdroid recovery folder & flash it. You are done. Now you can see the auto made CWM instead of stock recovery
attachment has screen shots-please refere that to this section
5.Download the stock rom from - http://forum.xda-developers.com/showthread.php?t=2520719
Extract the files & store it in separate folder.
Any custom rom for karbonn a2+
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
hi.. im using karbonn a2+ mtk 6575 device .i downlaod lewa os for karbonn a11 as same specification of karbonn a2+. but installed that succefully. but stuck in boot logo..but im not ported this rom.i just change boot image only.. what is the problem??
hi bro im mtk developer. we can port rom for a2+
Sent from my Karbonn A2+ using XDA Free mobile app
hi
Sent from my Karbonn A2+ using XDA Free mobile app
i ported two roms
ViKtory36 said:
Bump, is there anyone who can point me to the correct guide to follow?
Click to expand...
Click to collapse
hii
Custom ROM
Guys I found an awesome website for Getting custom ROMs for almost all karbonn and celkon devices try it..................
h t t p://androcustomroms.com/
Can you tell me step by step how to gain root access to karbonn A2?
Sent from my HTC Desire 616 dual sim using XDA Free mobile app
[email protected] said:
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
Click to expand...
Click to collapse
can you please post here the cwm recovery image for karbonn a2+ here..
My karbonn a2+ show this while installing
E:signature verification failed
Installation aborted.
what to do now?
It doesn't work with any ROM.
ROOT
Root Celkon q42
Download king root apk 2.3.5
Enable USB debugging
Open app click on root
Wait for 2-3 minutes
It says done then reboot
U successfully rooted ur phone
http://www.kingroot.net/down#rootPc
STOCK ROM
flash files and drivers
http://www.mediafire.com/download/xt1olbaadgq3op6/Q+42+final+software.rar
CUSTOM RECOVERY
PHILZ TOUCH
https://drive.google.com/file/d/0B-5wxQr-tTyWOS1YekpGdV9kQUU/view?usp=sharing
TWRP
https://drive.google.com/file/d/0B-5wxQr-tTyWc0pCT0lXQlczblU/view?usp=sharing
A BIG THANKS TO MY BRO
DAUD SHAH KHAN
and
yuweng for the port tool
how to install recovery
your phone should be rooted
install mobile uncle tools
place recovery.img in root of your internal sd
select recovery and flash
100% working
https://drive.google.com/file/d/0B-5wxQr-tTyWVnZwUHUwRUNKNE0/view?usp=sharing
custom roms soon
roms
Please do something about 'custom roms ' for it . #sudhansu bro.
Here are some Custom Recovery for cloudfone geo 402q
for any devs who want to improve this phone I'll help you
but from now on (coz I'm busy )
I'll help you to provide some of custom recoveries available for this phone
Click to expand...
Click to collapse
Requirments :
0. Rooted phone
1. Flashify from Playstore or mobile uncle tools
2. Custom recovery
Procedure :
1. Download my custom recovery
2. Back up your current stock recovery using flashify
3. Put the custom recovery file in your sd card
4. Then flash it using flashify or mobile uncle tools
TWRP 2.8.2
TWRP 2.8.1
TWRP 2.7.1
CWM
Carliv
Philz Recovery
give me a feedback or any comments it it worked thanks
YOU'RE ALL WELCOME
hi there guys!..
I have a problem, I have cloudfone next and i need to root it.. please help guys...
Hi XDA i want to install cy 12.1 Lolipop 5.1.1 os in my Samsung galaxy grand || 7102 so my issue is i don't have a computer( it was a break) so i How can i install CWM recovery in my device? help me i need much!
If you want to install cwm recovery and flash cm 12.1 without pc ,i will guide you.
I think it is better to install T.W.RP instead C.W.M
HERE YOU GO :-
1)Root your device using kingroot orfarmroot.One of these apps should work for ur device.
If you dont know how to use these apps then ask me
2)Now lets say your device is Rooted,You have to install T.W.R.P.
Download image file of TWRP :- http://forum.xda-developers.com/showpost.php?p=65199538&postcount=69
Flash the image file by Rashr orFlashify app.
If you don't know how to use these apps then ask me
3)Now T.W.R.P is installed on ur phone.Now you are ready to flash a custom rom like CM 12.1
4) Dowload the ROM you want to and put it in external sd card.
5)Go to T.W.R.P recovery by hardare key combo.
Vo up +Power+Home
6)Take backup of your current ROM.
If some thing goes wrong ,then you can restore your stock ROM
7)Flash the ROM as instructed by the ROM devs.
Hoping it will help you.
thanx bro i install cwm with rasherflash tool nd i install properly cm12.1 on my grand 2 but i face issue about 2nd sim colling voice didn't come i set up both sim as a 3G network but still no voice from 2nd sim calling i need much help
raymond_bqg said:
If you want to install cwm recovery and flash cm 12.1 without pc ,i will guide you.
I think it is better to install T.W.RP instead C.W.M
HERE YOU GO :-
1)Root your device using kingroot orfarmroot.One of these apps should work for ur device.
If you dont know how to use these apps then ask me
2)Now lets say your device is Rooted,You have to install T.W.R.P.
Download image file of TWRP :- http://forum.xda-developers.com/showpost.php?p=65199538&postcount=69
Flash the image file by Rashr orFlashify app.
If you don't know how to use these apps then ask me
3)Now T.W.R.P is installed on ur phone.Now you are ready to flash a custom rom like CM 12.1
4) Dowload the ROM you want to and put it in external sd card.
5)Go to T.W.R.P recovery by hardare key combo.
Vo up +Power+Home
6)Take backup of your current ROM.
If some thing goes wrong ,then you can restore your stock ROM
7)Flash the ROM as instructed by the ROM devs.
Hoping it will help you.
Click to expand...
Click to collapse
Brother i facing big issue and issue was wifi drop i set as a never off wifi on sleep but when my device go to sleep mode downloding stop plz help me
mahu patel said:
Brother i facing big issue and issue was wifi drop i set as a never off wifi on sleep but when my device go to sleep mode downloding stop plz help me
Click to expand...
Click to collapse
On my cm 12.1 os grand 2
hei there, i just bought a new mi4c. and it has been a week.
So i want to share my step on installing custom rom right away from stock.
the step is :
1. Install kingiroot
2. Root your phone using kingiroot
3. Install flashify from playstore
4. grant root for flashify and flash twrp custom recovery to mi4c
5. install reboot recovery from playstore and use the app to enter recovery mode
6. Flash custom recovery from your desired ROM. (in my case, i install custom recovery from xiaomi.eu
7. Install your ROM through the custom recovery
Done.
I've already installed Custom Rom 8.2.1.0 miui.eu Everything work well excepet edge tap (edge control).
do i miss something on my flashing step?
or do i need some later ROM as baseband before installing my desired custom ROM?
For anyone following this, if you want to flash a not miui based custom rom you have to unlock the bootloader with the official tool, otherwise you will brick the device.
If you brick the device flash the oldest firmware you can find(I already had this problem before).
I used Kingo to root my Mi4c and it worked well.
Does not work anymore if you run with Android 7.0
Note: my AV detected Kingo Link as trojan...