[Completed] Infocus m350 bricked.. - XDA Assist

i got this infocus m350 phone which got boot looped during an update for lollipop, i tried flashing it with both the stock rom and lollipop update somehow along the way it seems i did something wrong, now my phone screen is black but i can still get into fastboot mode which i think someone here will be able to guide me on making my phone come back. i have tried fastboot boot.img recovery.img and nothing seems to work.. all i can see is a black screen even i flash it with boot and recovery. Please Help:crying:

Hi,
I can't find a relevant thread for your device and issue. You can ask for help here though,
Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Good luck!

Related

[Completed] [Q] ATT LG G2 stuck in boot loop help please :(

I'm rooted, but never got around to installing any ROMs or recoveries. There was an update that force installed after I held off on doing it for a while, but not my phone is stuck no boot loop. I tried doing a hard reset but it didn't work and I tried download mode but the I got an error message when driver installation started. Is there anything else I can do/anything I've done wrong?
help
Hi,
I suggest you do have a custom recovery, no? Otherwise how did you root? And yes, taking an OTA with a custom recovery will usually end badly.
You could try the procedure in this thread,
> LG G2 > G2 Android Development > [FIX] Installed TWRP and now you're stuck after OTA?
If that doesn't help, you can ask for help here,
> LG G2 > G2 Q&A, Help & Troubleshooting > [HELP THREAD][Noob Friendly] LG G2 Ask any question
Good luck!
Thank you. Thread closed.

[Completed] Broken fastboot & recovery

Hello there,
I'm new here but I really need help with my phone, I broke the recovery by flashing the wrong version of the recovery, and I did the big mistake of rebooting before flashing a good version on top of it.
Now I can't access either fastboot or recovery, and the flash_image program that can be used by adb does not work and tells me that there was an error searching partitions...
I can boot in the installed rom just fine, so if adb is needed I can use it, but I don't have anything else than that. The phone is a Huawei G510-0100 (u8951)
I don't know what to do anymore...
EDIT: after using the application ROM Installer from here: http://forum.xda-developers.com/showthread.php?t=2480034 I was able to get a usable recovery but with corrupted screen and in that recovery I flashed the right version so everything is back to order.
Hi,
This is all I could find.... There's really no feedback on the thread, so flash anything at your own risk as always...
> General discussion > Upgrading, Modifying and Unlocking > reverting your huawei g510-200 back to factory stock
If you need help, you can try asking in that thread.... Otherwise for this or any other questions, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Recovery Menu Blank Screen, Can't Wipe Device

So I don't know what happened, I have my rooted RIV R55 II (Relatively unknown device, running Android 4.4 KitKat), and I tried loading a Lollipop ROM onto the device using the update from ADB function in the recovery menu. It didn't go through, said signature verification failed. I went to turn off signing in the developer settings, and went back to recovery, but it's now a blank screen. Can't figure out why. Can no longer wipe the device either, as the wipe function goes through recovery and just goes blank screen when attempting to wipe. Help?
Hi!
I hope you tried to flash something made for your exact device make and model? If not... You may be bricked. Unfortunately I can't find anything relevant on XDA for your device..... But you could try asking for help here,
Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
And again, only flash anything that is made for your device.
Good luck!

[Completed] lenovo a6000plus/problem with bootloader

hi, I have rooted my device by kingroot was successfully. but my phone firmware was crashed due to this I can't go on boot menu. and trying to install twrp recovery from flashify was successed. Now I restart my phone shows blank sceen i.e( only brand lenovo name shows). I can't go on recovery mode .. . plz assit me to run device....:
Hi,
Thanks for writing to us at XDA Assist. I can't find anything related to your question on XDA, please ask here:
Android Q&A, Help & Troubleshooting
Good luck!

[Completed] brom error (2005), device powers up too early

Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.
FinnTheHuman. said:
Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version in vain. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
Click to expand...
Click to collapse
I didn't back up the EFS stuff at first place, that's why I think it's a permanant issue. In fact, I would have done a full backup after I had rooted the device but, unfortunately, it seemed that NANDroid, CMW and such custom recoveries were not compatible with it.
Thanks anyway. you did a good job

Categories

Resources