Related
Gentlemen,
Please I updated my note 10.1 2012 GT-N8000 to kitkat 4.4.2 without rooting or usb debugging enable, then during charging it, i forget it around four hours it restarted, and all the time in download mode, i used odin, failed to open Com port, i tried to enter to recovery, failed. i tried to enter to bootloader, i thing it is locked, also when i tried to use odin, it tells that no PIT is found, any suggestion? (changed usb cable, uninstall kies and install usb samsung drivers, used different versions of odin with CSC,Bootloader, PIT ,PDA,modem, files etc... ) all are failing, seems that it is just locking itself... the only place i can enter, is when i enter press power button, and - volume (Volume downn), it would take me to ODIN MODE , Product name: GT-N8000, Currnet Binary: Custom, System Status: Official, RP SWREV: A2 and it is all the time Downloading Do not turn off target, even i tried to uninstall the battery for sometime, and i put it again... and if just insert it to the usb it would start directly to Firmware upgrade encountered an issue, please select recovery mode (which i can't enter to it, failed to enter by power + volume up) in kies & try again, also the initialization of kies is not supported, if used...
What are you trying to flash with Odin? Try official
And if the device actually pops up in Odin and the COM port is through then the cable and the hardware is all fine.
raedzahr said:
Gentlemen,
Please I updated my note 10.1 2012 GT-N8000 to kitkat 4.4.2 without rooting or usb debugging enable, then during charging it, i forget it around four hours it restarted, and all the time in download mode, i used odin, failed to open Com port, i tried to enter to recovery, failed. i tried to enter to bootloader, i thing it is locked, also when i tried to use odin, it tells that no PIT is found, any suggestion? (changed usb cable, uninstall kies and install usb samsung drivers, used different versions of odin with CSC,Bootloader, PIT ,PDA,modem, files etc... ) all are failing, seems that it is just locking itself... the only place i can enter, is when i enter press power button, and - volume (Volume downn), it would take me to ODIN MODE , Product name: GT-N8000, Currnet Binary: Custom, System Status: Official, RP SWREV: A2 and it is all the time Downloading Do not turn off target, even i tried to uninstall the battery for sometime, and i put it again... and if just insert it to the usb it would start directly to Firmware upgrade encountered an issue, please select recovery mode (which i can't enter to it, failed to enter by power + volume up) in kies & try again, also the initialization of kies is not supported, if used...
Click to expand...
Click to collapse
Download a N8000 firmware which comes packed in zip
extract it and then select it with AP in odin,
flash and wait until you're done
and if it is struggling with the port try another one
Download the official firmware for your model number regardless of the region (that is if you're ok with it otherwise use your own region's)
Then use the appropriate Odin version to flash the firmware to your device while in download mode. Put the Firmware file into PDA/AP.
Make sure Reartition is not ticked otherwise your device will be bricked. (Lol it rhymes)
Make sure the cable connection is stable and don't disconnect the connection until the process of flashing is done.
Not advertising but you can find your firmware at Sammobile. It tells you which Odin version to use too. I'm not sure if Odin version matters but let's play safe.
Hope this helps.
Sent from my SM-A300F using XDA Free mobile app
bernardwu said:
Download the official firmware for your model number regardless of the region (that is if you're ok with it otherwise use your own region's)
Then use the appropriate Odin version to flash the firmware to your device while in download mode. Put the Firmware file into PDA/AP.
Make sure Reartition is not ticked otherwise your device will be bricked. (Lol it rhymes)
Make sure the cable connection is stable and don't disconnect the connection until the process of flashing is done.
Not advertising but you can find your firmware at Sammobile. It tells you which Odin version to use too. I'm not sure if Odin version matters but let's play safe.
Hope this helps.
Sent from my SM-A300F using XDA Free mobile app
Click to expand...
Click to collapse
My phone was on a 4.4.2 custom rom when the same incident as the op happened. Where can I find the official firmware for 4.4.2?
Previously, I've talked about how I bricked my G920T by using an apk to try to root my phone.
Then I tried to do a factory reset with the stock recovery but it wouldn't even go into the stock recovery. So I flashed TWRP and wiped the whole phone including the system partition.
Then I tried to flash a stock 6.0.1 firmware to the phone but doing so did not improve the situation as my phone still won't boot. Even worse, when I power my phone, all I see is the blue LED indicator, no Samsung logo, nothing.
Then I tried to flash a custom ROM like XtreStoLite but that didn't fix anything either.
When I use TWRP or the stock recovery, the error "failed to mount /efs (invalid argument)" comes up on the log. I tried using the ADB method to fix it but my phone would not get recognized by ADB probably because USB debugging isn't on by default.
I cannot shut down the phone without having it charged to a power source then holding down PWR+DOWN VOLUME+HOME until the screen shuts off.
When I enter download mode, I don't see the warning screen, I enter the download mode directly.
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
yasteellutch said:
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
Click to expand...
Click to collapse
It doesn't warn me when I enter download mode, that's one of the problems.
I tried flashing the official ROM using ODIN, it still won't boot because of the efs error.
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Orginator said:
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
Click to expand...
Click to collapse
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
brenner650 said:
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Click to expand...
Click to collapse
How can someone with a box help me remotely?
zheyizhu said:
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
Click to expand...
Click to collapse
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
zheyizhu said:
How can someone with a box help me remotely?
Click to expand...
Click to collapse
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
brenner650 said:
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
Click to expand...
Click to collapse
The S/N sticker on the back of the phone is long gone, is there any other way I can find it besides from going into settings because I can't do that?
EDIT: I am able to borrow a friend's serial and got the firmware installed.
The Samsung boot logo is back now, however, the device still won't boot. The efs error is still there but the download mode warning sign came back.
EDIT #2: Okay, I flashed TWRP now and ADB is working once again. Can I utilize this to fix the efs error?
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Hello all,
So I finally got the dreaded FRP lock error when trying to reboot my phone.
Things I've tried to do:
1. Install Smart Switch and enter my model number + S/N and I get an error "This model number cannot be initialized"
2. Install Samsung Kiss update the drivers etc
3. Download stock firmware and try flash through Odin "Device wont recognize on PC or Odin" (But with another phone it will, so USB is fine)
4. Went into the recovery menu, wiped device/cleared cache etc
So the problem is the device is not recognizing on my on Windows 10 + Windows 7 - If I can get the device to recognize i will be able to flash stock firmware and my issue will be resolved.
If anyone has a bypass, or has resolved their issue please let me know - because I have tried everything.
Hi all,
I've got a Galaxy S6 SM-G920I which will boot to : An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I've installed the latest Samsung USB drivers to my PC.
I've installed smart switch and it says my device is " Unsupported Device " . I also updated smart switch to latest version and that made no difference.
I recently deleted 2 important video files by mistake.
A call to Samsung reveiled that there is no way to recovery deleted data from phones internal storage...
A bit of googling lead me to believe the data is still there, its just not visible. Here : https://howtorecover.me/data-recovery-internal-storage-android-phone-guide
So i'm following this guide and get stuck at the > su command. a bit more research reveals I need to root my device.
So I followed a guide on this forum to install latest version of twrp, odin, and magisk.
I reboot and I have root access to the phone.
I continue the guide and fail to proceed after the command > fdisk -l
So I install busybox, and grant it root access.
Command runs but has no output....
At this stage I decide to give up and initiate a system recovery from my phones settings.
Which lead to an endless boot cycle showing the Samsung logo.
More internet research lead me to believe downloading a stock firmware from sammobile might help.
So I downloaded G920IDVU4FRH2_G920ITEL4FRI1_TEL firmware and discovered the instructions on that webpage do not match the extracted content...
So I think that what I feed into odin was the wrong stuff and I've bricked my phone.
I can also access my phones download boot option, and thats all at the moment.
Comments and suggestions welcome
Found the solution here : https://www.reddit.com/r/GalaxyS8/comments/6nb51r/galaxy_s8_odin_flash_fail_softbrick/dk94krm/
Open Odin, place all the necessary files into their slots.
Go the the options tab, make sure "Auto Reboot" IS ticked.
Press "start", but as soon as you do, hold down Vol down+Bix+Power on your phone. Odin will fail and your phone will reboot into download mode again. Now press "Start" in Odin again, and your phone should flash without a problem. This might take a few attempts to get right, but I hope it helps.
At all flash new rom