Hello,
I have a Sprint Note Edge (SM-N915P) and I honestly don't like this lollipop update. I tried flashing with Odin back to KitKat but no luck and research on google says bootloader is the problem. Can anyone help me ? Any information on how to unlock this bootloader or just any method on how to downgrade back to kitkat.
I still need help!! Please anyone?
Thanks in Advance.
kezzmo said:
Hello,
I have a Sprint Note Edge (SM-N915P) and I honestly don't like this lollipop update. I tried flashing with Odin back to KitKat but no luck and research on google says bootloader is the problem. Can anyone help me ? Any information on how to unlock this bootloader or just any method on how to downgrade back to kitkat.
Thanks in Advance.
Click to expand...
Click to collapse
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
kain1979 said:
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
Click to expand...
Click to collapse
Hello, Thanks for this information. I have the 4.4.4 Firmware for SM-915P downloaded but when flashing with Odin i normally use AP or PDA to flash, i never thought of using BL(bootloader) to flash the firmware. I'm gonna try using your suggested method once i get back home and i would post a reply back to you. I truly appreciate it.
kezzmo said:
Hello, Thanks for this information. I have the 4.4.4 Firmware for SM-915P downloaded but when flashing with Odin i normally use AP or PDA to flash, i never thought of using BL(bootloader) to flash the firmware. I'm gonna try using your suggested method once i get back home and i would post a reply back to you. I truly appreciate it.
Click to expand...
Click to collapse
NO YOU SHOULDNT. Dude you gotta flash the BOOTLOADER FIRST or it's NOT GOING TO WORK. Open your firmware with WINRAR or sth like that, find the bootloader, boot.img or sth flash through BL and THEN flash firmware through AP / PDA. You had it right all along, but you need to flash KITKAT Bootloader first
kain1979 said:
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
Click to expand...
Click to collapse
Hello again, I tried exactly what you told me to do but still says failed. I downloaded stock kitkat (4.4.4) Firmware, then in Odin > BL > and selected the 4.4.4 firmware. I've attached a picture.
But if you're just talking about just only SM-915P "bootloader" file for kitkat and not the actual full firmware, then it is not present on sammobile.com or on any place with google search. The only bootloader file i found was for the international version (SM-915F) http://forum.xda-developers.com/note-edge/development/n915f-kitkat4-4-4bootloader-tar-unlock-t3063928http://forum.xda-developers.com/not...15f-kitkat4-4-4bootloader-tar-unlock-t3063928, even XDA website don't have the bootloader for SM-915P. :crying:
I've been trying for weeks, trust me. And i feel like i've reached a dead end and stuck with lollipop OS that i don't like.
kain1979 said:
NO YOU SHOULDNT. Dude you gotta flash the BOOTLOADER FIRST or it's NOT GOING TO WORK. Open your firmware with WINRAR or sth like that, find the bootloader, boot.img or sth flash through BL and THEN flash firmware through AP / PDA. You had it right all along, but you need to flash KITKAT Bootloader first
Click to expand...
Click to collapse
Yes, i opened the firmware with WINRAR and no bootloader file present. I downloaded it from sammobile.com. Even after extraction no boot.img present in the file. Picture below.
You gotta go deeper...
kezzmo said:
Yes, i opened the firmware with WINRAR and no bootloader file present. I downloaded it from sammobile.com. Even after extraction no boot.img present in the file. Picture below.
Click to expand...
Click to collapse
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND (among others):
* aboot.mbn
* NON-HLOS.bin
* rpm.mbn
* sbl1.mbn
* sdi.mbn
* tz.mbn
Extract all of the above files >
compress them in a .tar file using 7zip or another program >
flash ONLY THIS FILE through Odin | BL >
when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
kain1979 said:
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND boot.img. Extract just this file > flash ONLY THIS FILE through Odin | BL > when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
Click to expand...
Click to collapse
I was so impatient that i opened up a new thread on how to extract a file with winrar. I feel so stupid now. I should have waited for a reply from you first. I guess we still learn everyday. I appreciate the time and effort you're putting in this thread to walk me through. I'm forever grateful and thank you so much. I will do exactly what you mentioned and post a reply afterwards on the result. Thanks again.
kain1979 said:
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND (among others):
* aboot.mbn
* NON-HLOS.bin
* rpm.mbn
* sbl1.mbn
* sdi.mbn
* tz.mbn
Extract all of the above files >
compress them in a .tar file using 7zip or another program >
flash ONLY THIS FILE through Odin | BL >
when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
Click to expand...
Click to collapse
Hello, OK, i did everything step by step as you instructed but it failed to flash the bootloader. I've attached a picture below to see everything. Am i missing anything?
kezzmo said:
Hello, OK, i did everything step by step as you instructed but it failed to flash the bootloader. I've attached a picture below to see everything. Am i missing anything?
Click to expand...
Click to collapse
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
kain1979 said:
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
Click to expand...
Click to collapse
Oh ok. i will try it again.
kain1979 said:
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
Click to expand...
Click to collapse
Now it says "ABOOT" . Is that right?
kezzmo said:
Now it says "ABOOT" . Is that right?
Click to expand...
Click to collapse
does it get stuck there? doesnt it go any further???
kain1979 said:
does it get stuck there? doesnt it go any further???
Click to expand...
Click to collapse
Just stuck there and wouldn't do anything.
kain1979 said:
does it get stuck there? doesnt it go any further???
Click to expand...
Click to collapse
Do you have any suggestions? Or can you link me to a kitkat bootloader i can download, like the one you use for yourself. I don't know if this is a Sprint note edge issue because all other variants of the note edge seems to downgrade back to kitkat.
Lollipop just have too many issues like the one you also posted about the phone heating up badly, that happens to my note edge too. Battery draining like no tomorrow, it's just ridiculous.
I just wanna go back to kitkat.
Thanks again.
hey guys,
i wanted to update my s5 from pb1 to pd1 but i dont have root access and do not want to either(too lazy)so is the stock .tar available for me to update via odin?if yes please post the link. thanks in advance.
Sammobile.com has all available tar files
Hi. How can i get and how to install new modem and bootloader for galaxy s6 edge G925F? I downloaded last stock firmware and extract tar getting img files but i dont know what next? Can someone help
Anyone have the bootloader and modem for Marshmallow in Odin? I'd really be able to flash the zipped rom TEK rom then odin flash the two proper files to make it work than do a full odin flash, then odin recovery and root and then flash the zipped rom.
I have a SM-J327T from tmobile and I have an idea for root but I need the stock sboot and stock system files in an odin flashable format.
MillieBaby said:
I have a SM-J327T from tmobile and I have an idea for root but I need the stock sboot and stock system files in an odin flashable format.
Click to expand...
Click to collapse
Goto sammobile and download them
You do it?
MillieBaby said:
I have a SM-J327T from tmobile and I have an idea for root but I need the stock sboot and stock system files in an odin flashable format.
Click to expand...
Click to collapse
Tell me you do it please ?