Related
I9505GUEUBMG8
Info:
AP: I9505GUEUBMG8
CP: I9505GUEUBMG8
CSC: I9505GXARBMG8
Where is the development?
In my pants...
Thanks going to check it out
is this another 4.3 leak?
I made a flashable zip for you guys. Install through recovery. If you are not on i9505, flash loki-doki afterwards. Enjoy!:
Thread HERE
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
broodplank1337 said:
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
Click to expand...
Click to collapse
Hi broodplank1337, give you thanks for your really good job and colaboration with your kernel, ROM and info posted across threads.
I want ask you if you tried both new 4.3 leaked firmwares. Are the same? Any differences? Would be possible use new PIT file uploaded to manage those Gb loosed on a GT-i9505 International without reboots or semi-bricked status?
Thanks again! :good:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Febby said:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Easton999GS said:
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Click to expand...
Click to collapse
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Febby said:
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Easton999GS said:
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Click to expand...
Click to collapse
I'll have to leave that to the more experienced to create a zip or odin tar. I'm happy with my MF3 modem and non MF3 boot loader. Maybe my buddy @garwynn can comment on this modem deal because I don't know how non hlos works but it shouldn't prevent the baseband from showing. The sound and wifi both worked without issue, just the MF8 baseband didn't show so hlos in my experience didn't affect the sound or wifi.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Request for re-upload
Guys,
Can someone re-upload the ODIN files.. The link is invalid.
Did Samsung request to remove this?
Where is the link?
sent by me!
+1 for the Odin mirror
DJ_Jedi said:
+1 for the Odin mirror
Click to expand...
Click to collapse
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
MichelN said:
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
Click to expand...
Click to collapse
Thanks, downloading now, let you know if it's Odin flashable.
DJ_Jedi said:
Thanks, downloading now, let you know if it's Odin flashable.
Click to expand...
Click to collapse
From what i have seen in the zip file it is. I only don't know what that pit file is for.
Are you trying to flash it on a i9505 or i9505G ?
Yes it's the Odin version, the PIT is to repartition the device to the G table, but it's not accepted by the i9505 bootloader.
Of course im gonna flash it on the standard i9505, but i have to find a way to keep my Candy Crush savedata lol, Helium is not working that way, maybe Facebook sync?
UPDATED 4-08-2015 with NEW ATT MODEM OC3 5.0.1 Modem
A NOTE TO CLARIFY MODEMS AND FLASHING THEM: Your Modem is your BASEBAND. Flashing a Modem will UPDATE your BASEBAND.
Flashing a Modem and Updating your BASEBAND does NOT change or lock down your bootloader at all/any further than it already is.
The BOOTLOADER is what determines how locked down your phone is and WHICH root/recovery method can be used.
IF you are on MDB or MDL BOOTLOADERS then flashing these modems will NOT effect your ability to flash anything or change your bootloader.
If you are on MF3 or Newer bootloader then you can use SAFESTRAP to have its recovery and flash compatible Roms AND these modems.
If you are on MK2 bootloader you can use MK2's version of Safestrap and flash compatible Roms and Any of these modems.
To VERIFY "WHICH BOOTLOADER" you have on your phone you can follow these basic instructions.
1. Get "Terminal Emulator" from the play store.
2. Open Terminal Emulator and then type "su" without the quotation marks.
3. Hit the "x" and close Terminal Emulator once you have granted it Root Permission
4. Open Terminal Emulator app, type "su" without the quotes
5. Type getprop ro.bootloader
6. Look at the first line that shows up which is the installed bootloader. It should read "something like"
I337UCUAMDB/ I337UCUAMDL/ I337***MK2/ etc. etc.
I have put the other ATT Modems here as well for users to find the ATT specific modems in one place or in case you need/want to go back to your previous modem. Flashable in CWM/TWRP Recoveries.
Android File Host Links to ALL MODEMS https://www.androidfilehost.com/?w=files&flid=28808
ATT OC3 5.0.1 MODEM
4-08-2015
Thanks to Muniz_ri for posting his stock partition file which I grabbed the modem from.
https://www.androidfilehost.com/?fid=95916177934552752
ATT NJ4 4.4.4 Modem
11-14-2014
Thanks to Muniz_ri for uploading a stock rooted ROM from the .cfg 4.4.4 firmware update. Pulled modem from his rom.
http://d-h.st/V7Oi
ATT NI1 KK MODEM
9-18-2014
THANKS to Venom0642 for providing the modem and Muniz_ri for the firmware dump.
http://d-h.st/zqT
ATT NC1 OFFICIAL UPDATE KK MODEM
4-24-2014
THANKS to Jeboo for providing it
http://d-h.st/6th
Jeboos Link
http://d-h.st/4Xi
ATT NB1 OFFICIAL KK MODEM 2-26-2014
THANKS to Jeboo for making it for us...
http://d-h.st/4p8
ATT FMLD LEAKED KK MODEM 1-26-2014
THANKS to Shoman for extracting the modem for us!!!
http://d-h.st/OSt
ATT MK2 MODEM11-28-2013 http://d-h.st/2S0
ATT MJ9 MODEM 11-14-2013
http://d-h.st/Lam
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
ATT LEAKED MJ6 MODEM
10-24-2013
http://d-h.st/Bot
ATT MF3 MODEM 7-9-2013
http://d-h.st/ReU
ATT MDL MODEM MARCH 2013
http://d-h.st/6j8
ATT MDB MODEM MARCH? 2013 Came with Release of phone
http://d-h.st/Qei
FOR SAFESTRAP MF3 and NEWER USERS
This is what a tester DeadlySin9 did. He flashed the MJ6 Modem and it worked fine. He then tested going back to the MF3 modem. So if your signal becomes worse you CAN flash back to MF3 Modem but IF you have problems you may need to follow his advice below.You can see his comments here:
DeadlySin9 said:
Baseband is back on MF3 after flashing. Interestingly enough it's booted into stock and safestrap isn't loading. SuperSU is loaded and giving toast notifications and even let me grant to TiBu. Will try reinstalling SS and/or rerooting and see what works.
Back into my Safestrap slot, modem stuck across reboot. Rerooting was necessary, although root wasn't lost (go figure). Data and service are enabled just fine. Will try going back to MJ6 modem
Click to expand...
Click to collapse
So give DeadlySin9 a Thanks for testing.
FOR MK2 SAFESTRAP USERS
THANKS to Churapa for letting us know these DO work for the newer safestrap as well. Here is his comments and how he did it.
churapa said:
I can confirm that the modems work on Safestrap 3.71, I am running in the Stock strap the ROM SHostock v3.0 which is MK2 v4.3 and flashed the MJ6 modem from OP and my signal reception increased dramatically for the best.
Click to expand...
Click to collapse
I am putting these ATT I337 16GB and 32GB pit file here as a repository for anyone that may need it in the future. Please use at your OWN RISK and KNOW WHAT your doing and WHEN to use these to save your phones life. PLEASE do your research before using these to flash with Odin. They CAN ruin your device if used wrong or use the wrong one.
I337 ATT 32 GB PIT FILE REPOSITORY (Pulled from my 32GB I337)
DOWNLOAD LINK http://d-h.st/le3
I337 ATT 16GB PIT FILE REPOSITORY
DOWNLOAD LINK http://d-h.st/zxW
Thanks to "mbonus" and "Beast330" for getting us the 16GB pit files.
I am thinking there is no difference between the 16GB and 32GB pit file as they are exactly the same size and have the same exact md5 even though pulled from different phones.
Any difference over mf3? Is it worth flashing?
Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
In my experience modems can be better or worse. It all depends on where your located in the country. What works good for one person may not work good for another. The choice of having more modems to flash can increase or decrease your data speeds/call quality.
It does not hurt to try out modems and find which one works best for you in your particular region.
You can always flash back just as easy with the exact same modem you had if it doesn't work better for you.
Sent from My Spiderman Themed I337
I believe this will also help out with all the ATT users getting data drops on 4.3 with earlier modems. Trying this out now with echoe rom
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
How about sending mms/sms...any issues?
Calls, LTE, SMS, MMS, etc. all working for me.
This modem does seem a bit better, but I'll have to try it for a few days to be sure.
Venom0642 said:
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Click to expand...
Click to collapse
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
RockRatt said:
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
I extracted the modem and put it into a flashable zip to be used in cwm/twrp recoveries.
Link to Dev Host http://d-h.st/Bot
Link to dropbox https://db.tt/jM6yALXs
EDIT: I flashed it on Vision MJ5 Rom Firmware version 4.3 and so far so good. Then I flashed back to MF3 firmware ROM ShoStock 4.2.2 and flashed it and it worked on 4.2.2 as well.
Sent From My Spiderman Themed I337
Click to expand...
Click to collapse
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
mrnovanova said:
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
Click to expand...
Click to collapse
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
trueking7 said:
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
Click to expand...
Click to collapse
Facepalm makes sense
Carried by a Raven
rfb813 said:
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
Click to expand...
Click to collapse
Yes I do but they also can be found on the modem thread in the dev section. There is MDL/mdb/and mf3 if I remember correctly. If you need them send me a PM
Sent from My Spiderman Themed I337
I couldn't get the aws mod to work on this modem. keeps giving error of invalid command after it gets to 5%.
Can anyone else confirm?
While I didn't notice a difference when I switched from mdl to mf3, I do think mj6 shows an improvement in signal. Time will tell but so far it seems better.
Thanks, RockRatt.
Sent from my SGH-I337 using xda premium
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
sk8trix said:
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
See OP...it says it works on 4.2.2
sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
Lol oh wow sorry damn party foul
sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
That would entail reading a whole page back
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
p1gp3n said:
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
Click to expand...
Click to collapse
Good to hear. This is why I always try new modems. Then if they don't work out for me I can always flash back to the previous one that worked better
Sent From My Spiderman Themed I337
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
buhohitr said:
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
Click to expand...
Click to collapse
4.3
bennyboy2120 said:
4.3
Click to expand...
Click to collapse
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
Are you the same user that just posted in the Xposed framework thread about not being able to install Xposed?
Sent from my SCH-I535 using Tapatalk 4
Unfortunate. This confirms what I was worried about. :/
Sent from my Ñ£×Ú$ 5
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
naikoo said:
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
Click to expand...
Click to collapse
You're stuck on 4.3 now, your bootloader is locked. Using Odin to load a stock 4.3 firmware is the exact same thing.
You should've odin'd a stock 4.1.2 firmware, but it's too late now.
Sent from my SCH-I535 using Tapatalk 2
Safestrap Help
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Ahartless3 said:
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Click to expand...
Click to collapse
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
S3 Safestrap
buhohitr said:
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
I hear good word from users on old&slow tw rom over on Android development section
Sent from my unknown using Tapatalk
Ahartless3 said:
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
Click to expand...
Click to collapse
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
landshark68 said:
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
Click to expand...
Click to collapse
Perfect! Thanks for the info! I'm downloading Wicked Sensations for ML1 right now. Hopefully that works out.
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
android-incredible said:
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
Click to expand...
Click to collapse
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
SlimSnoopOS said:
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
Click to expand...
Click to collapse
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
android-incredible said:
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
Click to expand...
Click to collapse
Great. Now if they accidentally or intentionally take the 4.3 VRUCML1 OTA, using EZ Unlock will cause a bootloader hard brick. Please make sure your friend understands this.
Sent from my SCH-I535 using Tapatalk 4
Hey guys, just did a ton of searching but can't find much on rooting the S3 whiile its on 4.3 with NC1. Could anyone here help me out or get me in the right direction? Thanks in advance.
will.bates94 said:
Hey guys, just did a ton of searching but can't find much on rooting the S3 whiile its on 4.3 with NC1. Could anyone here help me out or get me in the right direction? Thanks in advance.
Click to expand...
Click to collapse
Easiest way right now would be to Odin back to ml1.
ThePagel said:
Easiest way right now would be to Odin back to ml1.
Click to expand...
Click to collapse
Okay, and then I would be able to root ml1 and install safestrap? I thought you couldnt odin back to older basebands?
will.bates94 said:
Okay, and then I would be able to roost ml1 and install safestrap? I thought you couldnt odin back to older basebands?
Click to expand...
Click to collapse
I think its because ml1 and nc1 are almost the exact same build.
ThePagel said:
I think its because ml1 and nc1 are almost the exact same build.
Click to expand...
Click to collapse
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
will.bates94 said:
Okay, and then I would be able to root ml1 and install safestrap? I thought you couldnt odin back to older basebands?
Click to expand...
Click to collapse
You simply cannot Odin flash back to pre-4.3 firmware. 4.3 to 4.3 is fine like @ThePagel posted.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You simply cannot Odin flash back to pre-4.3 firmware. 4.3 to 4.3 is fine like @ThePagel posted.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
will.bates94 said:
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2589314
---------- Post added at 12:53 PM ---------- Previous post was at 12:48 PM ----------
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
The kernel has been changed so saferoot will not work. I'm sure there are root methods for after the update but they won't be one click root. When I get home tonight I'll make a custom tar pre rooted for people who want to be on the newest build.
will.bates94 said:
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
Click to expand...
Click to collapse
So I do not confuse you, you're referring to another file that is for those of us who have an unlocked bootloader. It is the VRUCML1 modem-ONLY zip, this is something that is useless to you on 4.3 but is useful to those of us with an unlocked bootloader.
Edit: this modem-ONLY zip is roughly 20 MBs in size. Completely different thing than what ThePagel has supplied with a link. Basically, forget what you read about VRUCML1 being unavailable because the specific file is of no use to you.
ThePagel posted the Odin flashable, stock image tar that is readily available. That has always been available and will continue to be so. That 1.2+ GB tar file is to return to fresh, out of the box factory settings.
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
Yes, they are the same. I was simply agreeing with ThePagel. VRUCML1 and VRUCNC1 are both 4.3. You can not flash anything pre-4.3, so nothing that starts with VRA** or VRB***. Those are off limits for you.
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
Since you are already locked into 4.3, once you ODIN back to ML1, your only options are saferoot, safestrap, and safestrap compliant ROMs which are pretty much all the 4.3 touchwiz ROMs. You can read all about them in these threads:
http://forum.xda-developers.com/showthread.php?t=2639337
http://forum.xda-developers.com/showthread.php?t=2605648
landshark68 said:
Since you are already locked into 4.3, once you ODIN back to ML1, your only options are saferoot, safestrap, and safestrap compliant ROMs which are pretty much all the 4.3 touchwiz ROMs. You can read all about them in these threads:
http://forum.xda-developers.com/showthread.php?t=2639337
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Does it matter what version of odin I use?
@ThePagel Rooted on ml1, any rom suggestions since hyperdrive is a 4.1.2 based rom? which breaks my heart
will.bates94 said:
@ThePagel Rooted on ml1, any rom suggestions since hyperdrive is a 4.1.2 based rom? which breaks my heart
Click to expand...
Click to collapse
Old and slows ROM is probably the cleanest most stable 4.3 tw rom out there.
ThePagel said:
Old and slows ROM is probably the cleanest most stable 4.3 tw rom out there.
Click to expand...
Click to collapse
I don't see old and slows rom. http://forum.xda-developers.com/showthread.php?p=30640131 checked that index and I also did a search. Any pointers? Im normally pretty good with finding **** like this lol.
Here's a 4.3 specific list
http://forum.xda-developers.com/showthread.php?t=2653902
Hello all
whether there is someone who can help me? how to downgrade the version 4.4.2 to version 4.1.2? Can it? This is now my device was installed Superlite rom (using safestrap). but I also want to use another rom. like rom LP or MM. What can be installed using safestrap? someone please help me. thank you
ElevenSide said:
Hello all
whether there is someone who can help me? how to downgrade the version 4.4.2 to version 4.1.2? Can it? This is now my device was installed Superlite rom (using safestrap). but I also want to use another rom. like rom LP or MM. What can be installed using safestrap? someone please help me. thank you
Click to expand...
Click to collapse
3 Roms, Superlite, stock and Paul Pizz. You cannot and it's nearly impossible to downgrade. A jtag is the only option. Attempting to downgrade will brick your device
Sent from my Nexus 6
ShapesBlue said:
3 Roms, Superlite, stock and Paul Pizz. You cannot and it's nearly impossible to downgrade. A jtag is the only option. Attempting to downgrade will brick your device
Sent from my Nexus 6
Click to expand...
Click to collapse
Where do you think is better between Superlite and Paulpizz? and how do I check the IMEI and test mode on my device?
ElevenSide said:
Where do you think is better between Superlite and Paulpizz? and how do I check the IMEI and test mode on my device?
Click to expand...
Click to collapse
Honestly I wouldn't know. I have an unlocked bootloader. You'd have to ask someone else on that one. There are apps in the play store to check the IMEI. Unsure what you would even need the test mode for as they have disabled most of the testing on the S3 models
Sent from my Nexus 6
ShapesBlue said:
Honestly I wouldn't know. I have an unlocked bootloader. You'd have to ask someone else on that one. There are apps in the play store to check the IMEI. Unsure what you would even need the test mode for as they have disabled most of the testing on the S3 models
Sent from my Nexus 6
Click to expand...
Click to collapse
ok. thank you for your responses to all my questions. Now I so understand. Goodjob And Goodluck
Superlite imo is better
XxD34THxX said:
Superlite imo is better
Click to expand...
Click to collapse
ok. thanks
Do you know what that means? (on picture). how can we know the device is already unlocked bootloader?
That means nothing much, only that knox/firmware knows that you flashed odin or another ROM.
Go into the stock recovery and post a picture of that.
If it DOES NOT SAY NE1, your bootloader can be unlocked AFAIK.
If it DOES SAY NE1, JTAG is your only hope to downgrade(and it isn't worth it on a device this old imo)
XxD34THxX said:
That means nothing much, only that knox/firmware knows that you flashed odin or another ROM.
Go into the stock recovery and post a picture of that.
If it DOES NOT SAY NE1, your bootloader can be unlocked AFAIK.
If it DOES SAY NE1, JTAG is your only hope to downgrade(and it isn't worth it on a device this old imo)
Click to expand...
Click to collapse
Go into stock recovery? But i use safestrap
*edit
ElevenSide said:
Go into recovery? But i use safestrap
Click to expand...
Click to collapse
Safestrap is a version of a recovery
Sent from my Nexus 6