My buddy gave me a tablet to look at. It is the Asus Memo Pad 10 Model K00F (ME102A). The problem is it is stuck at the Asus logo on start up. I got into the recovery menu through the Power and Vol+ button and tried to wipe data/factory reset. That does its thing but still wont boot. I have gone through Asus' site and downloaded the latest update and with ADB tried to "apply update from ADB" from the recovery console using the sideload command. On the latest files (3.11 from the Asus support site) it sends to the tablet but then fails after "verifying update package... Installation aborted." I have tried with both the US and the WW versions of the firmware. I managed to find the 3.9 firmware from an older Asus site. I tried both the US and WW versions and it gets to installing update but then fails with this error. :"assert failed: !less+than_int(1381952086, getprop("ro.build.date.utc")) installation aborted." Now my best guess is that the update that broke it was the update between 3.9 and 3.11 hence the 3.9 has problems with dates while 3.11 doesn't have something correct for it to verify.
Any suggestions on what we can do with this? Asus does provide source code for the Kernels at all revision numbers so if there was a way to compile and flash something we can go from there. Please help or point me in the correct direction. Thank you,
h4mm3r0g0d
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Related
I saw a system update in my phone and I pressed the update icon. After updating my Huawei Honor Holly-U19V100R001C567B105 reboots and got stuck in the recovery options screen. I tried all the available option in the recovery menu but the phone still reboots into the recovery menu.
I downloaded a custom ROM and tried installing but got this message.
Signature Verification failed.
System have been root.
Can anyone give me a link to the right ROM for my phone.
Huawei Honor Holly-U19V100R001C567B105
Hello,
Welcome to XDA.
I'm finding the thread linked below but the build number is different than yours, try posting in that thread and ask if it will work for you, if not, the members there may be able to tell you where you can get the right one.
http://forum.xda-developers.com/android/general/guide-huawei-honor-holly-stock-rom-t3031466
I hope this helps. Good luck.
Hi,
I just purchased a manufacturer refurbished ASUS Memopad HD7 ME173X tablet running on Android 4.2.2. I believe it was functioning perfectly at the time I purchased it. However, I manually checked for update through settings and followed instructions to install. During installation reboot it is now stuck on "Installing System Update" for at least 5 hours. When pressing power button a message "patching remaining system files appears". I cannot access the recovery menu/bootloader using the button combination.
I believe that the tablet was not rooted etc. However I really need your help to help get this tablet back?!
Hi,
Try posting your question here:
http://forum.xda-developers.com/showthread.php?t=2503668
The experts there may be able to help.
Good luck!
Hi
my fe170cg(k012) was soft bricked..so i downgraded it to v4.3,then I download update files from asus website and updated firmware to 4.4 manuelli In the following
I kept update it to v.5 with ota this time after downloading completed My tab restart to install firmware but it takes much time & i was scared so i turned of tab during installing new firmware & then turned it on & firmware was installed,,
but problem start here,I cant connet my tab to pc via usb(MTP OR SYNC)..i tried pc link also installing usb drivers & adbs manuelli but pc cant even recognize it:crying: also i tried 2 other pc but the same.
Its a problem for many users but not solved...please help me I'M FROM IRAN and the asus official service center is weak alitle HERE SO i got to sent it to capital about 2000km away
please help me
rosy1996 said:
Hi
my fe170cg(k012) was soft bricked..so i downgraded it to v4.3,then I download update files from asus website and updated firmware to 4.4 manuelli In the following
I kept update it to v.5 with ota this time after downloading completed My tab restart to install firmware but it takes much time & i was scared so i turned of tab during installing new firmware & then turned it on & firmware was installed,,
but problem start here,I cant connet my tab to pc via usb(MTP OR SYNC)..i tried pc link also installing usb drivers & adbs manuelli but pc cant even recognize it:crying: also i tried 2 other pc but the same.
Its a problem for many users but not solved...please help me I'M FROM IRAN and the asus official service center is weak alitle HERE SO i got to sent it to capital about 2000km away
please help me
Click to expand...
Click to collapse
Hi rosy1996
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
I have Asus Zenfone 2 ZE550ML (Z008). My device is not rooted. Asus started rolling out marshmallow update for zenfone 2 series phones long ago. But no matter how many times I tap 'check update' from settings, nothing happens. I atleast waited 1 month but still didn't recieve OTA.
Then by following several instructions from different websites, I became interested in manual upgrade to M. I downloaded Asus's official marshmallow rom (.zip) for ZE550ml and then I took preparation of upgrading via ADB sideload.
I openend command window, typed adb sideload command, it was going fine, then suddenly my phone showed status 7 error and installation aborted. :'(
Then I deleted 'asssert....;' lines from update-script (of .zip file) according to a tutorial. then I finally fixed status 7 error.
but most unfortunately, it is now showing 'signature verification failed error' and installation aborted . :'(
AM I THE MOST UNFORTUNATE IN THIS WORLD?
can any of you help me about this?
THANX IN ADVANCE
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section:
ZenFone 2 Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hi everyone,
I own a Motorola Moto G2 (XT1068, dual sim) that came used with Android 6.0 on it.
I installed TWRP (twrp-3.0.2-3-titan.img) on it but failed to root Android 6.0 as well as 5.0 for whatever not yet understood reason. I don't do Android development for a living but I'm an IT professional, so handling adb and fastboot as well as reading and understanding instructions isn't a problem.
I flashed stock Android 4.4.4 (RETDEALL_XT1068_4.4.4_KXB21.85-14) which I successfully rooted by installing SuperSU via TWRP.
Next I updated SuperSU, verified that root access is indeed working and installed FlashFire, which I hoped to use to install OS upgrades, possibly without losing root. FlashFire is new to me (as of yesterday), everything else mentioned up to here is not.
I used the "Flash ZIP or OTA" action from within FlashFire and the previously downloaded update file in the /cache directory. I can't reproduce the file name since the phone is currently unusable and I didn't write the file name down prior to using FlashFire.
The state of the phone after this unsuccessful attempt was that of a broken USB device, i.e. unable to even register as whatever type of USB device. I learned that this can be fixed by holding the power button down for more than one minute, after which I managed to
get the phone to be shown as working "RELINK HS-USB QDLoader 9008" USB serial device in Windows 7 device manager.
I used the information in these two threads:
http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Since I started with Android 4.4.4 trying to upgrade to 5.0, I had hoped that the blank flash package for one of these Android versions would help fix my problem, but as of now, this doesn't seem to be the case. At the end of the blank flashing process, I get the message
FAILED <blank-flash:sdl-transfer-image:sdl-hello: error sending packet>
After that, the phone still has a black screen and cannot boot into anything. Repeating blank flash works after resetting whatever part of it is still working by holding the power button down for about 30+ seconds.
Is there anything obvious (or maybe even not so obvious) that I missed?
Thanks for reading and any help and/or pointers in the right direction.
Hello and thank you for using XDA Assist,
please create an account and post your question in our Android Q&A section:
G 2014 Q&A, HELP & TROUBLESHOOTING
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist