Related
Unfortunately, I've bricked my Acer Tablet after trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=1994294
The installscript finished the flash successfully, but after reboot, the bootloader only shows the message "Boot image verified failed" No booting and no CWM Recovery is available no more. I've tried several times to get into the fastboot mode with pressing the Power Button and Volume Button with the two knobs, but nothing helps. Neither switching the screenlock switch on and off. I figured out by trying, how to get into APX mode, but I don't know, if and how that could help me, solving my problem :/
Before I've tried to flash the ROM, I had CM10 with the Stock Bootloader in Unlocked Mode and CWM 6.0.2.3 Touch installed, but the Aroma Installer seems to have destroyed the CWM and locked my Bootloader again. Is there any way to unbrick the tablet now? Any help would be appreciated
V4lk0 said:
Unfortunately, I've bricked my Acer Tablet after trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=1994294
The installscript finished the flash successfully, but after reboot, the bootloader only shows the message "Boot image verified failed" No booting and no CWM Recovery is available no more. I've tried several times to get into the fastboot mode with pressing the Power Button and Volume Button with the two knobs, but nothing helps. Neither switching the screenlock switch on and off. I figured out by trying, how to get into APX mode, but I don't know, if and how that could help me, solving my problem :/
Before I've tried to flash the ROM, I had CM10 with the Stock Bootloader in Unlocked Mode and CWM 6.0.2.3 Touch installed, but the Aroma Installer seems to have destroyed the CWM and locked my Bootloader again. Is there any way to unbrick the tablet now? Any help would be appreciated
Click to expand...
Click to collapse
Just let the battery run dry. Then let it boot up normally without pressing any buttons when the battery runs out by connecting it to your charger. Hope it works!
Thanks for the reply. I tried that, but nothing happens, just the indicator LED on the power button turns on orange. The tablet does not boot on itself, if I connect the charger. I have to press the power button, but this results again in "Boot image verified failed"
Edit: Update. I figured out how to get into fastboot. I read something on google, with switching the screenlock switch on and off. That doesnt worked for me: The thing was, to hold the power button AND the volume button with the two knobs, then the tablet starts, to release the power button and THEN, while still HOLDING the volume button pressed, to switch on and off the screenlock button. Then the bootloader starts into fastboot mode, going into androidsdk and typed in cmd "fastboot oem unlock" solved the problem. The ROM starts and everything is fine
Why you don't write into the mentioned thread? There seems to come the issues from then ask there, sorry can't understand why opening new thread instead asking there.
Also the first time heard sucha thing, I also change the rooms from cm10 to Jacobus, back to stock, on cool one and to cm and back, to test everything and try something out.
Never had issues buy this ways
Gesendet von meinem GT-N7000 mit Tapatalk 2
I don't have the right to post in the proper thread, so I opened up a new one.
In order to install a JB based ROM, you need the JB compatible CWM. The version of CWM you used is apparently for ICS, so I am a little surprised it worked to install CM10. Where did this 6.0.2.3 come from? Use 6.0.1.5 from pawitp. I've used it and swapped/flashed ROMs at least ten times. Never encountered that issue (or any issue). As a matter of fact, I would just run Vorbeth's EasyRoot as it does all the grunt work for you. I've used it twice and it worked flawlessly.
It is just too late... bad luck for me today, I fullbricked the tablet, after performing a restore with CWM 6.0.1.4. Not bootloader, nothing. Just APX Mode.
V4lk0 said:
It is just too late... bad luck for me today, I fullbricked the tablet, after performing a restore with CWM 6.0.1.4. Not bootloader, nothing. Just APX Mode.
Click to expand...
Click to collapse
Hi I had the same issue after flashing from CM10.1 to CoolOne. However I fixed it by unlocking the bootloader => reinstalling recovery => flashing CM 10.1 back.
Did you have any luck recovering from APX?
Gullinbursti said:
Did you have any luck recovering from APX?
Click to expand...
Click to collapse
No, unfortunately not. I gave my tablet 2 weeks ago to the acer repair service and got it back today. The support said, that they have changed the mainboard and flashed the latest android on the tablet, but they did that on guarantee, so I didn't had to pay something ^^ Now it is running Android 4.1.1 Stock ROM from Acer.
Exact same problem
I am having the exact same problem. I am able to boot into recovery mode but then I get the android laying down with with the red triangle, question mark. My bootloader is unlocked but aftrer the update my screen is stucked on the ICONIA TAB startup screen.
I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!
I suggest that a mod moves this to the General section
pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon
timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??
Thank god for this thread omg, saved my life
Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!
Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers
hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it
Hey there, I'm currently possesed a THL 2015, chiense phone, with firmare kitkat 4.4.4, Rooted.
Ok, today i was trying to change my Bootanimation (which i've changed several times already), but i've encountred a huge problem.
My phone has stucked on On/Off loops at the first time after i've changed the bootanimation...
Well i've tried to enter Recovery Mode.. but.. hmm.. how should i put it... My phone got stuck on it aswell..
My phone is looping in Recovery mode (i know that because there is the logo with the "No command thing"),
The device is turning off, then back on every 7~15 seconds after enerting automaticly into Recovery mode..
I've tried every single key pressing on the On/off key and Volume keys.. but in failure.. the Recovery mode won't goes out, and the device still loops.
Okay... now What i've tried also.
I've tried to connect my device into my computer trying to getting a shell trough ADB. but in failure, cause of the device loops in Recovery Mode, adb and the computer won't recongnizing my device.
Ok.. Flashing?
So i've tried to download SP_Flash_tool for flashing into stocked downloaded rom, but also in failure, non of the roms i've downloaded for my Device were recognized in the SP flash tool, (the scatter).
I've downloaded it from several sites in them were this site: needrom/com/download/thl-2015.
Tried every rom, still not recognizing.
Well i've failured in everything i've tried, so im here asking for help.
My main goal is getting a shell for my device, for me deleting the bootanimation i've tried to install.
ok.. i've talked too much..
Thank's for helping.
azsd979 said:
Hey there, I'm currently possesed a THL 2015, chiense phone, with firmare kitkat 4.4.4, Rooted.
Ok, today i was trying to change my Bootanimation (which i've changed several times already), but i've encountred a huge problem.
My phone has stucked on On/Off loops at the first time after i've changed the bootanimation...
Well i've tried to enter Recovery Mode.. but.. hmm.. how should i put it... My phone got stuck on it aswell..
My phone is looping in Recovery mode (i know that because there is the logo with the "No command thing"),
The device is turning off, then back on every 7~15 seconds after enerting automaticly into Recovery mode..
I've tried every single key pressing on the On/off key and Volume keys.. but in failure.. the Recovery mode won't goes out, and the device still loops.
Okay... now What i've tried also.
I've tried to connect my device into my computer trying to getting a shell trough ADB. but in failure, cause of the device loops in Recovery Mode, adb and the computer won't recongnizing my device.
Ok.. Flashing?
So i've tried to download SP_Flash_tool for flashing into stocked downloaded rom, but also in failure, non of the roms i've downloaded for my Device were recognized in the SP flash tool, (the scatter).
I've downloaded it from several sites in them were this site: needrom/com/download/thl-2015.
Tried every rom, still not recognizing.
Well i've failured in everything i've tried, so im here asking for help.
My main goal is getting a shell for my device, for me deleting the bootanimation i've tried to install.
ok.. i've talked too much..
Thank's for helping.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
There are no forums that are specific to your device on XDA, however you can post your questions here:
Android Q&A, Help and Troubleshooting
You'll receive expert advice there. Good luck!
Hi everybody, I am experiencing trouble with my tf101 S/N B70 after I tried to install a custom ROM.
I am not able to boot properly as it seems I have deleted the ROM before trying to install a new recovery. The result is the tablet is stuck on ASUS logo and it is not possible to boot, recover, wipe, basically anything.
I tried PERI, Easy flasher, but none of them seem to work.
If I plug the tablet on a PC running win7 but I cannot install the drivers.
Any idea or suggestion on what to do?
Up for help...
Any news here? Would somebody please answer this call for help?
Even if someone would tell me to just throw it in the garbage can...it would be appreciated!
I had the same problem. I was stuck on the logo too.
I discovered I was only able to cold boot by vol down and power like recovery but when the text appear, you wait 10 sec.
Do you have access to APX mode ?
Hope that will help
espad0n said:
I had the same problem. I was stuck on the logo too.
I discovered I was only able to cold boot by vol down and power like recovery but when the text appear, you wait 10 sec.
Do you have access to APX mode ?
Hope that will help
Click to expand...
Click to collapse
I have the same problem and your solution doesn't work. I see the text but restarting runs to same screen as before.
Research and learn look up ADB mode on this site.
These fine gentlemen do not have the time to repeat themselves day after day.
If you look for information as to how to use ADB and find the software you will succeed.
It really is easier if you find and fix. I am not trying to be a a hole.
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
try charging the phone for a few hours
se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.
sounds like u need a new battery
ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.
@bmark240
help please
se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.
kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os
THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.
i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.