Database Info

[ROM] THL W8 GravityMod

!!! DEPRECATED. TAKE A LOOK HERE INSTEAD !!!
GravityMod - custom ROM for THL W8
Version 1.0
Hey!
This is my custom ROM for THL W8 that's based on Eastcom W1 stock Android 4.1.2 ROM, which
I find better than the THL's stock one.
It's a pure stock with some of my mods on top of it and it's flashable via recovery (CWM or TWRP).
My recommendation is to use TWRP recovery since everything is tested with that one. I don't
test update zips on CWM because I am too lazy to reflash recovery every time.
(For installing ClockworkMod or TeamWin recovery, refer to this thread )
Credits
- maniak555 and akim14 for giving a tip regarding compatible Eastcom W1 rom.
Main features
- Deodexed
- Rooted
- Busybox
- Sysinit support (init.d scripts)
- AOSP lockscreen
- Additional languages
- Power menu - reboot to recovery
- Volume key cursor control
- Automatic hide of signal icons for empty SIM slots
- Better camera picture quality at default settings
- Internet calls support (SIP)
- Faster UI ( still locked at 30FPS, though )
- Updated Google apps
- Google Now included
- Stock launcher replaced with Nova Launcher
- Stock browser replaced with Google Chrome
- Chinese apps removed
- Update Kitchen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USE AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE CAUSED TO YOUR DEVICE.
Download
http://tinyw.in/vdEa
(MD5 checksum: c73b72f8c719c93e1f764a149ece2d72)
Installation instructions
1) Download ROM zip and put in on SD card
2) Reboot to recovery (cwm or twrp). Turn off signature verification if it's on (ZIP is not signed)
3) Backup your current ROM (optional, but highly recommended)
4) Perform factory reset (wipe data, cache, dalvik cache)
5) Install ROM zip downloaded in step 1)
6) Reboot. Patience required - first boot takes a while
7) Visit Update Kitchen to update or customize GravityMod
ATTENTION:
Kernel (boot image) that comes with this ROM is not compatible with the stock ROM, nor other custom ROMs (probably).
When returning back to stock rom/other rom, you should flash stock kernel afterwards (e.g. using SP Flash Tool) .
Otherwise device won't boot. I will provide a ZIP package with stock kernel soon.

reserved

10x will try it now

thank you for the work you make C3C076.
Could you please upload more screencaps to see how the ROM looks ?

It looks just like the stock one. The only visual difference is the lock screen.

C3C076 said:
It looks just like the stock one. The only visual difference is the lock screen.
Click to expand...
Click to collapse
OK, thx

just noticed that phone speaker isn't working with your rom

Well, this must be your local issue. Or do you think I would release the ROM with such essential thing not working?
I'm on this ROM for almost a week and haven't come across a single issue yet.

What about some CM circle battery?

C3C076 said:
What about some CM circle battery?
Click to expand...
Click to collapse
nice

C3C076 said:
Well, this must be your local issue. Or do you think I would release the ROM with such essential thing not working?
I'm on this ROM for almost a week and haven't come across a single issue yet.
Click to expand...
Click to collapse
somehow, after 10 hours speaker got back to life...
10x

I have launched the initial version of GravityMod Update Kitchen
You can use it to customize the ROM.
http://gravity.ceco.sk.eu.org/

Does anyone get FC while using Face Unlock?

Yes. I'll take a look at it...

I hope that with official android 4.2 there will not be a fps limit

enricogiovamazing said:
I hope that with official android 4.2 there will not be a fps limit
Click to expand...
Click to collapse
depends on the kernel

:laugh: :laugh: :laugh:

Thanks for your update ! Is it possible to have the home button for wake up phone screen

C3C076 said:
:laugh: :laugh: :laugh:
View attachment 1908419
View attachment 1908420
Click to expand...
Click to collapse
AWSOME
is this the entire system of the W1 on the W8?

Yep.
Finally found a way to flash it correctly. What I was missing was the uboot partition. Flashing boot and system from different device was not enough.
Looks really promising since everything seems to be working great. Guys, you haven't seen such a smooth UI as this one has Really awsome.
I also find a way how to make a 4.2 rom zip to be flashed from recovery. But there is one thing that needs to be resolved.
After flashing new rom, recovery won't work anymore. It has to be reflashed with one built with new kernel image. Recovery flashing can be part of an update zip. The bad thing is that since new kernel image is about 200kb bigger than the older one, TWRP recovery can't fit our 6MB limit. CWM still fits OK. This means, after flashing rom via recovery you will end up with CWM.
I still need some time to iron out everything to release some initial release (pure stock, without any mods)

[Q] What is the Best App or Way to Keep Root after Flashing Zip?

I love Custom ROMs and Kernels and I'm sure you all do too. It seems that every time I flash my favorite CM ROM which has a built in CM SuperUser found within Settings and then after flashing my favorite kernel, I simply lose root for the ROM and the SuperUser stops working. I want to know how to get the CM SuperUser working again after flashing the zip in recovery.
Here is where my problem seems to be different than others. I can get root back by installing SuperSU and then going to settings and telling it to "Ignore CM Root Settings" and then rebooting, then root access works with SuperSU and the system thinks its doing its job too...but then when I uninstall SuperSU the entire problem comes back.
So my question is, is there a solid method to keeping the built in CM SuperUser found in Settings working as it did before flashing that zip that broke the ROMs root in the first place?
Any help is greatly appreciated! Thanks so much in advance!

I think you are experiencing a similar problem like I did ( http://forum.xda-developers.com/showthread.php?t=2602670 ). Am I right?
My root in CM11 is not working properly. So every time I flash CM11 with TWRP, I have to flash SuperSU right after CM11 and my kernel.
My personal explanation is, that SELinux (enforcing) doesn't work well with CM11 yet.

Cloonix said:
I think you are experiencing a similar problem like I did ( http://forum.xda-developers.com/showthread.php?t=2602670 ). Am I right?
My root in CM11 is not working properly. So every time I flash CM11 with TWRP, I have to flash SuperSU right after CM11 and my kernel.
My personal explanation is, that SELinux (enforcing) doesn't work well with CM11 yet.
Click to expand...
Click to collapse
Yeah, I'm pretty sure we are having the exact same problem seeing that it's CM and you flashed a kernel which broke your built-in root.
Isn't there an update for the built-in SuperUser or something? CM is really popular so I know some people have liked it enough to want to keep the built in SuperUser and not use a halfa$$ workaround. Don't get me wrong, SuperSU is LEGIT, but I want the built-in SuperUser this time because I don't want it sitting in the Settings for no purpose.
Anyone? Thank you in advance!

superuser updated today and fixed the CM breaking root deal.
What's New
- New -cn/--context parameter for su binary (devs: see How-To SU update)
- Handle mksh being switched out for sh
- Daemon forces new session immediately at launch (moved up)
- Fixed reading dynamic properties on 4.4 (update ASAP if 4.4 user)
- Fixed issue where root wasn't granted on CM
- Add support for Samsung 4.4
- Update copyright notices to 2014
- Updated language files
Additional information
Updated
January 20, 2014

I think the latest version of SuperSU (1.91) is supposed to fix that.

mistahseller said:
superuser updated today and fixed the CM breaking root deal.
What's New
- New -cn/--context parameter for su binary (devs: see How-To SU update)
- Handle mksh being switched out for sh
- Daemon forces new session immediately at launch (moved up)
- Fixed reading dynamic properties on 4.4 (update ASAP if 4.4 user)
- Fixed issue where root wasn't granted on CM
- Add support for Samsung 4.4
- Update copyright notices to 2014
- Updated language files
Additional information
Updated
January 20, 2014
Click to expand...
Click to collapse
The problem is imho the built-in superuser by CM (https://play.google.com/store/apps/details?id=com.noshufou.android.su&hl=en or https://play.google.com/store/apps/details?id=com.koushikdutta.superuser&hl=en) not SuperSU. Actually I'm not really sure which one is used in CM.

Cloonix said:
The problem is imho the built-in superuser by CM (https://play.google.com/store/apps/details?id=com.noshufou.android.su&hl=en or https://play.google.com/store/apps/details?id=com.koushikdutta.superuser&hl=en) not SuperSU. Actually I'm not really sure which one is used in CM.
Click to expand...
Click to collapse
cm uses superuser. flashing supersu fixes the issue and rids cm of everything superuser related.

It looks like, at least from all the research I did today, that there actually might be a fix for all this by possibly updating the actual ROMs built-in version of SuperUser.
If you look at this version of the SuperUser app by ClockworkMod on Google Play, you can see in one of the screenshots it shows an app requesting permission from what looks like the exact UI as the built-in SuperUser we see in our CM-based ROMs.
CM Built-In SuperUser App on Google Play:
https://play.google.com/store/apps/details?id=com.koushikdutta.superuser
Screenshot of SuperUser found on Google Play:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will report back if I can find a solution or fix!

xnickfx said:
It looks like, at least from all the research I did today, that there actually might be a fix for all this by possibly updating the actual ROMs built-in version of SuperUser.
If you look at this version of the SuperUser app by ClockworkMod on Google Play, you can see in one of the screenshots it shows an app requesting permission from what looks like the exact UI as the built-in SuperUser we see in our CM-based ROMs.
CM Built-In SuperUser App on Google Play:
https://play.google.com/store/apps/details?id=com.koushikdutta.superuser
Screenshot of SuperUser found on Google Play:
I will report back if I can find a solution or fix!
Click to expand...
Click to collapse
You could try to get the .apk of SuperSU or CM's superuser and put it in the "app" or "priv-app" folder of your CM-ROM .zip-file.
I tried to simply replace the su-binary in the xbin folder... Stupid idea though. Didn't work out

Bummer, so I didn't find a solution / fix, but I did find some possibly helpful links.
These are options that I researched very deeply in any and every way possible. Notes for found possibilities are noted below the option, if any.
Opt-1 .) Locate where the files or code for the built-in SuperUser are located within ROM and update / replace them with newest version of SuperUser, and also gain root when re-root is needed.
Opt-2 .) Replace SuperUser found in CM-based ROM's Settings with newest version of SuperSU by either deleting from ROM's Settings somehow or keep it and have SuperSU built in ROM's Settings same as current SuperUser.
I do believe that somewhat of Option #2 might be possible. I don't really know for sure yet, but I found these other 2 links that look pretty interesting.
http://forum.xda-developers.com/showthread.php?t=2033590
http://forum.xda-developers.com/showthread.php?t=1539711
I know you can install SuperSU and pretty much ditch SuperUser for good, but then you still have it sitting in the ROMs settings for no reason at all.
You can remove and hide SuperUser from the ROMs settings but in order to do that you have to completely disable root. You can remove it by going to Developer Options or SuperUser settings and choosing "disable" for SuperUser Access. Unfortunately when doing this SuperSU immediately stops working even when open and closes the first chance it gets.
If anyone else can shed any light at all on the subject, it would be VERY MUCH appreciated! Thank you!

[UTIL][WIN]I Don't Want You! || Get rid of unwanted mods || No data loss || No backup

Hi guys,
Have you ever installed a mod without making a backup before? Did the mod break your system or was not working the way you expected? The only way to recover the system to the previous state was to restore an old backup and loose all new data.
Thanks to my mod, this won't happen again! I present to you "I Don't Want You!".
It means NO NEED TO ALWAYS MAKE BACKUP BEFORE INSTALLING A MOD!
How it works?
It creates update.zip containing apps changed by mod in comparison to stock system and deleting files added by the mod to our system.
What it does?
-creates update.zip
-signs the zip
-Additionally: pulls /system from the device (using adb) (you need to do that once before installing mods instead of unpacking system manually form FTF/.zip file)
Requirements:
-Windows
-.NET Framework 4.5 or higher
-files installed/changed by mod (the content of mod's .zip file without META-INF)
-Recovery installed on your Android device
-Rooted android device
-Java
Compatibility:
Every device and every Android build!
It does not fully support mods with AROMA Installer
Currently It works only with mods influencing /system.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
[MIRROR]
Be aware that I am a real beginner in programming and some bugs may occur, so I would be very thankful if you could tell me how my work could be improved and what to fix
Please leave a feedback below!
Do not mirror my files! Ask for permission before posting my work anywhere!​

CHANGELOG:
2.1(25.06.2015)
-fixed bug "zip not found"
2.0 (17.06.2015)
-now the update-binary will be taken from mod's zip file so the mod should be compatible with EVERY device
-added ability to extract the mod's zip file so you don't have to extract it by yourself
-no need to write the path now! just drag and drop the folder or file to the program's window!
1.6 (31.12.2014)
-fixed bug when there were no files to delete
-fixed permission
-should be signed now
1.5 (27.12.2014)
-FIXED CRASH DURING CLEANING UP
1.4 (27.12.2014)
-no need to give path to pulled system!
-fixed little bug when there are no files changed by the mod
1.3
-fixed icon
-fixed temp folder bug
BUGS:
-icon bugs
-some users experience ADB bugs if someone could help me with this one, I will be really grateful​

Maciek602 said:
[place for changelog&bugs]
Click to expand...
Click to collapse
This looks handy. Thanks for sharing. Hopefully I'll be able to test it in the next few days after switching roms.

Looks really handy...been looking for this

Too soon to ask for, but I will stick around for a Linux version to come out
Cheers till then.
Happy Holidays

Saatvik Shukla said:
Too soon to ask for, but I will stick around for a Linux version to come out
Cheers till then.
Happy Holidays
Click to expand...
Click to collapse
Would you like a port of it?

Can the update.zip be flashed with stock recovery?
(Probably not, but I don't have my PC around to check )
Sent from my D620r [Stock 4.4.2]

Vagelis1608 said:
Can the update.zip be flashed with stock recovery?
(Probably not, but I don't have my PC around to check )
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
Update.zip made by my tool should work on all recoverys using edify language. Please provide me an example of flashable zip for your recovery and I will check.
If It comes to porting the tool for linux, I need help in that matter as far as I am not using Linux and I haven't made any program for that system yet. Of course I will provide source code. Please contact me via PM. However you can try opening the tool with Wine. The ADB wont work but you can copy your /system manually and provide path to it in program.

Maciek602 said:
Update.zip made by my tool should work on all recoverys using edify language. Please provide me an example of flashable zip for your recovery and I will check.
Click to expand...
Click to collapse
Update.zip (attached) : http://forum.xda-developers.com/showthread.php?p=52214999
Sent from my D620r [Stock 4.4.2]

This doesn't also back up the modem/radio, does it?

Such a nice tool .....
Sent from my Moto G using XDA Free mobile app

Great job man!
Would you mind to put up kind of a noob tutorial with a brief description/explanation of what each option would exactly do?
...dont need to explain what the option "EXIT" will do though! Lol

RMarques said:
Great job man!
Would you mind to put up kind of a noob tutorial with a brief description/explanation of what each option would exactly do?
...dont need to explain what the option "EXIT" will do though! Lol
Click to expand...
Click to collapse
+1

Crashed
Looks like it copied /system but then failed at the last minute

Like jshare, crashed in last minute!

crashes during cleaning up process.....maybe add code to kill ADB and restart it before cleaning

@Vagelis1608
It should work
@ChazzMatt
Of course it doesn't! Currently it works only with /system mods.
@RMarques
The only options you need is:
1. For pulling system from your phone
2. To make update.zip (all other options are included in this one)
@jshare @Limac @Manvindar
Yeah, I forgot to add line for killing "adb" process in latest version, because I slightly rearranged whole code. I will upload fixed version in 10 min
UPDATE
I have uploaded fixed version!

Maciek602 said:
@Vagelis1608
It should work
@ChazzMatt
Of course it doesn't! Currently it works only with /system mods.
@RMarques
The only options you need is:
1. For pulling system from your phone
2. To make update.zip (all other options are included in this one)
@jshare @Limac @Manvindar
Yeah, I forgot to add line for killing "adb" process in latest version, because I slightly rearranged whole code. I will upload fixed version in 10 min
UPDATE
I have uploaded fixed version!
Click to expand...
Click to collapse
Backing up modem would be a neat feature.

There is a message saying "This app cannot be executed on your PC".
Im running Windows 8.1 64bits

Do you have .Net framework 4.5?

[ABANDONED] MatrixROM for G900V

Matrix ROM for Samsung Galaxy S5 (Verizon)
Have you joined the Matrix?
Features:
-ROM Control with Nexus and Sammy SystemUIs, and 3 included BitSyko layers themes (Tangerine, Blue Mist, and Clear), and the option to remove bloat
-OTA Updater, for easy updates (no need to check XDA twice a day for updates)
-Matrix Boot animation
-Init.d support
-Build.prop tweaks
-Based off the latest Verizon Lollipop release (BOD5)
-Deodexed
-Zipaligned
To-Do:
1) FIX BUGS
2) Add more themes to ROM control
3) Make OTA updates flash automatically (somehow...? any devs know how...?)
4) Make themes more diverse
5) Add launcher toggle in ROM Control
6) Add more debloating options to ROM Control
Bugs:
-Nexus UI crashes upon reboot (clicking "OK" fixes it instantly)
-Default wallpaper doesn't apply on first boot
-I think ants are also bugs
-You tell me
DOWNLOADS:
-> Matrix ROM v1.4
-> OD5 Firmware Tar
INSTALLING:
Must be on any rooted rom or stock rom beforehand
1) Install FlashFire
2) Use it to wipe everything (optional), install the firmware package OD5, and install the rom zip
3) Wait for install to complete (first boot on deodexed lollipop takes >15 minutes, be patient)
4) Profit
this thread is pretty short, ain't it?
XDA:DevDB Information
[ROM] [ROM CONTROL] [OD5] [OTA Updater] [THEMES] Matrix ROM, ROM for the Verizon Samsung Galaxy S 5
Contributors
Nandr0idC0nsumer, Nandr0idC0nsumer
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OD5 firmware
Version Information
Status: Alpha
Created 2015-06-30
Last Updated 2015-06-30

Reserved

Reserved

Reserved

Nice to see you up and running.

Can we see some screenshots ?

Thorkle said:
Can we see some screenshots ?
Click to expand...
Click to collapse
Uploading them after dinner.

I used Safe Strap and I started 19:10- 19:21 start to finished Very Cool Boot animation and most of all i love the lock screen. Far out man
Edit 1.) I tryed the Debloat apps that you have on here and. It had not uninstalled them at this time. just FYI
Edit 2.) I just installed Wanam Installer and Xposed installer both working fine.

Try this one:
http://repo.xposed.info/module/com.serajr.blurred.system.ui

Snoopy679 said:
I used Safe Strap and I started 19:10- 19:21 start to finished Very Cool Boot animation and most of all i love the lock screen. Far out man
Edit 1.) I tryed the Debloat apps that you have on here and. It had not uninstalled them at this time. just FYI
Edit 2.) I just installed Wanam Installer and Xposed installer both working fine.
Click to expand...
Click to collapse
Can you use SuperSU to get the logs from "MatrixROM configuration" and send them to me? This is an issue that was the reason it took me so long to make the ROM, so seeing it not working is a real bummer

blair.sadewitz said:
Try this one:
http://repo.xposed.info/module/com.serajr.blurred.system.ui
Click to expand...
Click to collapse
I tried this on KitKat, doesn't work on Sammy ROMs
or does it?
what if this is all a lie?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If we're flashing over from Plasma do you recommend that we still wipe or is a dirty flash safe?

ajmilliron said:
If we're flashing over from Plasma do you recommend that we still wipe or is a dirty flash safe?
Click to expand...
Click to collapse
dirty is fine but if u have issues than try wiping

Nandr0idC0nsumer said:
Can you use SuperSU to get the logs from "MatrixROM configuration" and send them to me? This is an issue that was the reason it took me so long to make the ROM, so seeing it not working is a real bummer
Click to expand...
Click to collapse
I don't know how to get them or even send them to you. do you know how i can get them and be able to send them to you? Standby I have to load Su Pro to get it brb

Snoopy679 said:
I don't know how to get them or even send them to you. do you know how i can get them and be able to send them to you? Standby I have to load Su Pro to get it brb
Click to expand...
Click to collapse
Load SU pro, go into matrixrom config, then do the thing you said was not working. After the reboot, go into SuperSU, then logs, then click the latest log (the one at the top) and send me what it says.

Righteous, @Nandr0idC0nsumer :]
Flashing this immediately! and I'll be sure to report back with some feedback.. thanks for your work.
I'm sure I'll figure it out very soon ..hard way or not...but do other RRO layers themes get along with this rom?

I am running Serjar Blurred SystemUI right now--ON FREEDOMROM, THE SPAWN OF YOUR NOW-ARCH-NEMESIS!!!11

MatrixRom Configurations @ 06/30 09:08PM
(This is in all Black colors below
mount -o rw,remount /system
sh /system/MatrixMods/Bloat/unistall_verizon.sh
sh /system/MatrizMods/reboot.sh
(This is in all RED below
sh: /system/matrixMods/Bloat/unistall_verizon.sh: No such file or directory
(This is in all Black colors below
Rebooting....

quantumqweef said:
Righteous, @Nandr0idC0nsumer :]
Flashing this immediately! and I'll be sure to report back with some feedback.. thanks for your work.
I'm sure I'll figure it out very soon ..hard way or not...but do other RRO layers themes get along with this rom?
Click to expand...
Click to collapse
Yep.
Just need to push them to /system/vendor/overlay (create the directory if it isn't there) and reboot

Snoopy679 said:
(This is in all Black colors below
mount -o rw,remount /system
sh /system/MatrixMods/Bloat/unistall_verizon.sh
sh /system/MatrizMods/reboot.sh
(This is in all RED below
sh: /system/matrixMods/Bloat/unistall_verizon.sh: No such file or directory
(This is in all Black colors below
Rebooting....
Click to expand...
Click to collapse
I see the issue... fix should be coming in an OTA soon.

[COK2-N915T] DEODEXED - STOCK - ROOTED URv0 VIRGIN - LOLLIPOP 5.1.1 -> TEKHDway!*!

NEWEST - N915TUVU2COK2 - DEODEXED - STOCK - FOR DEV's / END USER
- DEVELOPERS CAN USE IT AS A BASE / PLEASE REPLACE UPDATER-SCRIPT / CREDIT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- ROOTED
- DEODEXED
- BASEBAND FREE (Use it with any Modem) - New features *might* require latest baseband.
- STOCK
- NO MODIFICATIONS
N915T_NE_5.1.1_URv0_COK2_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087009542
Build.prop edit for the included Kernel (Wifi Passwords not sticking)
N915T_NE_5.1.1_URv0_COK2_build.prop_Edit_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087012484
Keeping the Note Edge alive...
ENJOY
TEKHD

Dev Area-2

Dev Area-3

Dev Area-4

Dev Area-5

Dev Area-6

This guy doesn't take a break! You rock dude!
Sent from my SM-N910T3 using Tapatalk

been so long since i flash anything.
Is this a update.zip via recovery or is it a odin?
Also knox trip correct?

Thank you sooooo much

@TEKHD can you add a recovery flashable OK2 baseband too please.
Edit - WiFi password not sticking on reboot.

Awesome! Thank you!
Can't wait for a bloat ware removed version.
Ditto on the flash able baseband

WOW that was FAST!
Many thanks for that.
Might you be willing to upload an odexed version? I don't care about theming so the vanilla setup is just fine. Cheers.

This ROM is AMAZING! Thanks so much for breathing life in our phones

Feature wake up the edge screen when phone locked (swipe the Edge green left then right) is dead.

AS I understand from other threads...
Little-Fish said:
Feature wake up the edge screen when phone locked (swipe the Edge green left then right) is dead.
Click to expand...
Click to collapse
That has been removed by T-Mobile/Sammy in this 5.1.1 - not something about this particular ROM

bert269 said:
That has been removed by T-Mobile/Sammy in this 5.1.1 - not something about this particular ROM
Click to expand...
Click to collapse
I'm stock and on the last T-Mobile update, and I still have the ability to do that, I don't think either T-Mobile or Samsung removed that from the software.

Sorry, then I'm mistaken...
parusia said:
I'm stock and on the last T-Mobile update, and I still have the ability to do that, I don't think either T-Mobile or Samsung removed that from the software.
Click to expand...
Click to collapse
As I said - i just saw in another thread that someone was also complaining about the 'Edge unlock feature' that has been removed by this rom. (" http://forum.xda-developers.com/showpost.php?p=64130770&postcount=14 ")
Then I guess it HAS something to do with this modified ROM.
I will anyway spend time this weekend installing this modified ROM and test and report back.
I am also planning to flash the SAMmy stock rom, root and report back on that.
Sorry if I created confusion.

TEKHD said:
NEWEST - N915TUVU2COK2 - DEODEXED - STOCK - FOR DEV's / END USER
- DEVELOPERS CAN USE IT AS A BASE / PLEASE REPLACE UPDATER-SCRIPT / CREDIT
- ROOTED
- DEODEXED
- BASEBAND FREE (Use it with any Modem) - New features *might* require latest baseband.
- STOCK
- NO MODIFICATIONS
N915T_NE_5.1.1_URv0_COK2_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087009542
Keeping the Note Edge alive...
ENJOY
TEKHD
Click to expand...
Click to collapse
I wipe: system, data and cache before I flashed with TWRP 2.8.7.0
I got a "zip signature verification failed 1" error.
Nothing wrong with the zip, I can open it and extract the contents.
Did I miss anything pre-required?
Thanks

bert269 said:
I wipe: system, data and cache before I flashed with TWRP 2.8.7.0
I got a "zip signature verification failed 1" error.
Nothing wrong with the zip, I can open it and extract the contents.
Did I miss anything pre-required?
Thanks
Click to expand...
Click to collapse
I just flashed it. Coming from the Note 4 port. I did factory reset 3 times then flashed. Nothing else. First thing I tried was video call and it worked.
Seems pretty smooth but I haven't downloaded all my personal bloat yet. lol
EDIT: Well I was on it this version long enough to play memory game and tiny burgers on the edge. Backed it up in case I need an edge game fix and am back on the Note 4 port elite!

Still get the Error "Zip signature verification failed"
mscion said:
I just flashed it. Coming from the Note 4 port. I did factory reset 3 times then flashed. Nothing else. First thing I tried was video call and it worked.
Seems pretty smooth but I haven't downloaded all my personal bloat yet. lol
EDIT: Well I was on it this version long enough to play memory game and tiny burgers on the edge. Backed it up in case I need an edge game fix and am back on the Note 4 port elite!
Click to expand...
Click to collapse
I re-downloaded the file and check the MD5 values on the SD-card - they match. There is nothing wrong with this status of .zip file.
What are you using to falsh it with?. As I said - I used TWRP 2.8.7.0 - maybe that is the problem??
Ideas are welcome, as I would HATE to goto the stock rom and not have root.....