!!! DEPRECATED. TAKE A LOOK HERE INSTEAD !!!
GravityMod - custom ROM for THL W8
Version 1.0
Hey!
This is my custom ROM for THL W8 that's based on Eastcom W1 stock Android 4.1.2 ROM, which
I find better than the THL's stock one.
It's a pure stock with some of my mods on top of it and it's flashable via recovery (CWM or TWRP).
My recommendation is to use TWRP recovery since everything is tested with that one. I don't
test update zips on CWM because I am too lazy to reflash recovery every time.
(For installing ClockworkMod or TeamWin recovery, refer to this thread )
Credits
- maniak555 and akim14 for giving a tip regarding compatible Eastcom W1 rom.
Main features
- Deodexed
- Rooted
- Busybox
- Sysinit support (init.d scripts)
- AOSP lockscreen
- Additional languages
- Power menu - reboot to recovery
- Volume key cursor control
- Automatic hide of signal icons for empty SIM slots
- Better camera picture quality at default settings
- Internet calls support (SIP)
- Faster UI ( still locked at 30FPS, though )
- Updated Google apps
- Google Now included
- Stock launcher replaced with Nova Launcher
- Stock browser replaced with Google Chrome
- Chinese apps removed
- Update Kitchen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USE AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE CAUSED TO YOUR DEVICE.
Download
http://tinyw.in/vdEa
(MD5 checksum: c73b72f8c719c93e1f764a149ece2d72)
Installation instructions
1) Download ROM zip and put in on SD card
2) Reboot to recovery (cwm or twrp). Turn off signature verification if it's on (ZIP is not signed)
3) Backup your current ROM (optional, but highly recommended)
4) Perform factory reset (wipe data, cache, dalvik cache)
5) Install ROM zip downloaded in step 1)
6) Reboot. Patience required - first boot takes a while
7) Visit Update Kitchen to update or customize GravityMod
ATTENTION:
Kernel (boot image) that comes with this ROM is not compatible with the stock ROM, nor other custom ROMs (probably).
When returning back to stock rom/other rom, you should flash stock kernel afterwards (e.g. using SP Flash Tool) .
Otherwise device won't boot. I will provide a ZIP package with stock kernel soon.
reserved
10x will try it now
thank you for the work you make C3C076.
Could you please upload more screencaps to see how the ROM looks ?
It looks just like the stock one. The only visual difference is the lock screen.
C3C076 said:
It looks just like the stock one. The only visual difference is the lock screen.
Click to expand...
Click to collapse
OK, thx
just noticed that phone speaker isn't working with your rom
Well, this must be your local issue. Or do you think I would release the ROM with such essential thing not working?
I'm on this ROM for almost a week and haven't come across a single issue yet.
What about some CM circle battery?
C3C076 said:
What about some CM circle battery?
Click to expand...
Click to collapse
nice
C3C076 said:
Well, this must be your local issue. Or do you think I would release the ROM with such essential thing not working?
I'm on this ROM for almost a week and haven't come across a single issue yet.
Click to expand...
Click to collapse
somehow, after 10 hours speaker got back to life...
10x
I have launched the initial version of GravityMod Update Kitchen
You can use it to customize the ROM.
http://gravity.ceco.sk.eu.org/
Does anyone get FC while using Face Unlock?
Yes. I'll take a look at it...
I hope that with official android 4.2 there will not be a fps limit
enricogiovamazing said:
I hope that with official android 4.2 there will not be a fps limit
Click to expand...
Click to collapse
depends on the kernel
:laugh: :laugh: :laugh:
Thanks for your update ! Is it possible to have the home button for wake up phone screen
C3C076 said:
:laugh: :laugh: :laugh:
View attachment 1908419
View attachment 1908420
Click to expand...
Click to collapse
AWSOME
is this the entire system of the W1 on the W8?
Yep.
Finally found a way to flash it correctly. What I was missing was the uboot partition. Flashing boot and system from different device was not enough.
Looks really promising since everything seems to be working great. Guys, you haven't seen such a smooth UI as this one has Really awsome.
I also find a way how to make a 4.2 rom zip to be flashed from recovery. But there is one thing that needs to be resolved.
After flashing new rom, recovery won't work anymore. It has to be reflashed with one built with new kernel image. Recovery flashing can be part of an update zip. The bad thing is that since new kernel image is about 200kb bigger than the older one, TWRP recovery can't fit our 6MB limit. CWM still fits OK. This means, after flashing rom via recovery you will end up with CWM.
I still need some time to iron out everything to release some initial release (pure stock, without any mods)
Related
to all:
I've decided to re-star from "0" with this ROM using KPC firmware instead of KQN.
So this will take some time, my suggestion is to no use this ROM for the moment.
INTRODUCTION
This is my second ROM, finally I can say MY because I've made it from a full stock ROM.
(Obviously, this was possible thanks guides made by some true developpers )
______________________________
SPECIFICATIONS
Based on KQN
KQN Kernel
TW4 launcher with 5 Icons on Doc (This is the fixed KPC Chinese TW4 Launcher, I've add multilanguage support and 5 icons mod)
Removed bloatwares
Removed all apps can be retrieved from the market
Added Nofrill CPU
Added CPU spy
Added Root Browser (free edition)
TWEAKS
Deodexed
Rooted
Build Prop Tweaks
Zipalign
Enhanced I/O
SD card Speed
I8150 3d driver
TunderBolt
init.d support
Russian lanquage and keyboard
Arabic Support (Keyboard not icluded)
Special Functions
UI :
SGS3 Icons
Extended Power Menu with screnshot capability
Quickpanel with 14 selectable toggles (Flashlight is bugged dont'use and disable it on quickpanel settings)
Swipe to remove notification
Removed Swipe to unlock message from lock screen
SGS3 style dialer tab
Phone :
Non-Increasing Ringtone
enhance outgoing call vibration
Videocamera :
Focus and shot with power button
No 15% battery alert
Music Player :
No 10% battery alert
Video Player :
No 10% battery alert
FM Radio :
No 10% battery alert
INSTALLATION
- Copy the file on your SD memory card
- Reboot in recovery mode (Use cwm/CWM Touch or TWRP)
- Install DeepSky_1.0_Signed.zip file
- Restart the device
Note: installation does not do any wipe, so do wipe cache and davilkcache manually before restarting.
If you come from another ROM, full wipe/factory reset is suggested.
Download links
Download Removed
Note: This ROM is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Changelog
v. 1.0: 03/Jan/2013
- Initial release
Addons, Fixes and updates
See 2nd post
Thanks
- Texten for inspiration and tweaks
- Broodplank for tutorials
- Lidroid
- Gō Nagai for platt logo
- All developpers on XDA
- Androidiani.com forums
- A lot people and their work
...
- Me
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
REMOVED APPS PACKAGE
1.Removed Google Apps <--- click to download
Google removed apps: like Talk, PlusOne, Street... etc... (Install package from recovery)
2.Removed Samsung Apps <--- click to download
Samsung removed apps: like Kies Air, Infoalarm, Animated Wallpapers... etc... (Install package from recovery)
reserve 2
I like your ROM's and I want to test this one, but I really don't want to make sys. wipe.
Can it be installed over Ginger Revenge 1.1.5 without system wipe?
PS: And I would love to see "HoneyComb" lockscreen from Ginger Revenge in this ROM.
will i will think about this one cuz gigabread+ is driving me crazy
apkfox said:
Can it be installed over Ginger Revenge 1.1.5 without system wipe?
Click to expand...
Click to collapse
The installation process wipes and replace only system files (and all tweaks you're applied manually to gingerrevenge)
Personal data and apps is retainend if you dont wipe it manually.
in any case make a backup before flashing
Doesn't work on my phone...
Made factory reset, cleaned cache, davlick.
Installed without error messages, but after boot animation it just stays on blinking "S" logo and screen sometimes flashes with white light. Tried to fix permissions and reinstall - result is the same.
Reverted back to Ginger revenge.
PS: CWM 6.0.1.2 non-touch
I've tested with CWM 6.0.1.9 and with TWRP 2.2.1 successfully.
starting also from a non clean base... maybe try to download again the zip file
hiej said:
I've tested with CWM 6.0.1.9 and with TWRP 2.2.1 successfully.
starting also from a non clean base... maybe try to download again the zip file
Click to expand...
Click to collapse
Tried with TWRP 2.2.1 - same problem. But I fixed it by formatting internal SD card. Don't know what exactly was wrong with it...
So far everything works fine.
One little advice, change the starting message language to English (see screenshot).
I'll try to fix in eay that it startd with right language for every country.
btw, russian language works fine?
Yep, it works as it should. Big thanks for that. :good:
works as well, but sometimes my phone just freeze, i dont know why, on 1.3 1.5 roms also, and i must remove battery for restart phone
somebody have same problem as me?
Does this also has "17 lockscreen with music widget" ?
Can you make odin package? because I want to instal modem too, because my wifi doesn't work.
I installed this rom from cwm recovery, but I think that only rom was installed, without modem etc.
The modem will never been changed by flashing a rom.
You can flash it by yourself: forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
AndroidiusMaximus said:
The modem will never been changed by flashing a rom.
You can flash it by yourself: forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
Click to expand...
Click to collapse
Yep, sorry I forget about it. Thanks anyway! =)
btw. this ROM is stable? because I'm installing it on my fathers smartphone.
Waiting for the confirmation of presence of "17 lockscreen", I am eager to install this rom...
The ROM download link is not working for me...whereas the removed google and samsung apps are working..please help..
lontu said:
Waiting for the confirmation of presence of "17 lockscreen", I am eager to install this rom...
The ROM download link is not working for me...whereas the removed google and samsung apps are working..please help..
Click to expand...
Click to collapse
I can download it
lontu said:
Waiting for the confirmation of presence of "17 lockscreen", I am eager to install this rom...
The ROM download link is not working for me...whereas the removed google and samsung apps are working..please help..
Click to expand...
Click to collapse
If you check his signature you will see (In vacation.... Finally!). So we have to wait for him but why not to try flashing till then??? and see your self all the details??
No...not accessible from my network...can anybody already downloaded please upload to some other locations..
NEWEST - N915TUVU2COK2 - DEODEXED - STOCK - FOR DEV's / END USER
- DEVELOPERS CAN USE IT AS A BASE / PLEASE REPLACE UPDATER-SCRIPT / CREDIT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- ROOTED
- DEODEXED
- BASEBAND FREE (Use it with any Modem) - New features *might* require latest baseband.
- STOCK
- NO MODIFICATIONS
N915T_NE_5.1.1_URv0_COK2_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087009542
Build.prop edit for the included Kernel (Wifi Passwords not sticking)
N915T_NE_5.1.1_URv0_COK2_build.prop_Edit_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087012484
Keeping the Note Edge alive...
ENJOY
TEKHD
Dev Area-2
Dev Area-3
Dev Area-4
Dev Area-5
Dev Area-6
This guy doesn't take a break! You rock dude!
Sent from my SM-N910T3 using Tapatalk
been so long since i flash anything.
Is this a update.zip via recovery or is it a odin?
Also knox trip correct?
Thank you sooooo much
@TEKHD can you add a recovery flashable OK2 baseband too please.
Edit - WiFi password not sticking on reboot.
Awesome! Thank you!
Can't wait for a bloat ware removed version.
Ditto on the flash able baseband
WOW that was FAST!
Many thanks for that.
Might you be willing to upload an odexed version? I don't care about theming so the vanilla setup is just fine. Cheers.
This ROM is AMAZING! Thanks so much for breathing life in our phones
Feature wake up the edge screen when phone locked (swipe the Edge green left then right) is dead.
AS I understand from other threads...
Little-Fish said:
Feature wake up the edge screen when phone locked (swipe the Edge green left then right) is dead.
Click to expand...
Click to collapse
That has been removed by T-Mobile/Sammy in this 5.1.1 - not something about this particular ROM
bert269 said:
That has been removed by T-Mobile/Sammy in this 5.1.1 - not something about this particular ROM
Click to expand...
Click to collapse
I'm stock and on the last T-Mobile update, and I still have the ability to do that, I don't think either T-Mobile or Samsung removed that from the software.
Sorry, then I'm mistaken...
parusia said:
I'm stock and on the last T-Mobile update, and I still have the ability to do that, I don't think either T-Mobile or Samsung removed that from the software.
Click to expand...
Click to collapse
As I said - i just saw in another thread that someone was also complaining about the 'Edge unlock feature' that has been removed by this rom. (" http://forum.xda-developers.com/showpost.php?p=64130770&postcount=14 ")
Then I guess it HAS something to do with this modified ROM.
I will anyway spend time this weekend installing this modified ROM and test and report back.
I am also planning to flash the SAMmy stock rom, root and report back on that.
Sorry if I created confusion.
TEKHD said:
NEWEST - N915TUVU2COK2 - DEODEXED - STOCK - FOR DEV's / END USER
- DEVELOPERS CAN USE IT AS A BASE / PLEASE REPLACE UPDATER-SCRIPT / CREDIT
- ROOTED
- DEODEXED
- BASEBAND FREE (Use it with any Modem) - New features *might* require latest baseband.
- STOCK
- NO MODIFICATIONS
N915T_NE_5.1.1_URv0_COK2_TEKHD.zip
https://www.androidfilehost.com/?fid=24269982087009542
Keeping the Note Edge alive...
ENJOY
TEKHD
Click to expand...
Click to collapse
I wipe: system, data and cache before I flashed with TWRP 2.8.7.0
I got a "zip signature verification failed 1" error.
Nothing wrong with the zip, I can open it and extract the contents.
Did I miss anything pre-required?
Thanks
bert269 said:
I wipe: system, data and cache before I flashed with TWRP 2.8.7.0
I got a "zip signature verification failed 1" error.
Nothing wrong with the zip, I can open it and extract the contents.
Did I miss anything pre-required?
Thanks
Click to expand...
Click to collapse
I just flashed it. Coming from the Note 4 port. I did factory reset 3 times then flashed. Nothing else. First thing I tried was video call and it worked.
Seems pretty smooth but I haven't downloaded all my personal bloat yet. lol
EDIT: Well I was on it this version long enough to play memory game and tiny burgers on the edge. Backed it up in case I need an edge game fix and am back on the Note 4 port elite!
Still get the Error "Zip signature verification failed"
mscion said:
I just flashed it. Coming from the Note 4 port. I did factory reset 3 times then flashed. Nothing else. First thing I tried was video call and it worked.
Seems pretty smooth but I haven't downloaded all my personal bloat yet. lol
EDIT: Well I was on it this version long enough to play memory game and tiny burgers on the edge. Backed it up in case I need an edge game fix and am back on the Note 4 port elite!
Click to expand...
Click to collapse
I re-downloaded the file and check the MD5 values on the SD-card - they match. There is nothing wrong with this status of .zip file.
What are you using to falsh it with?. As I said - I used TWRP 2.8.7.0 - maybe that is the problem??
Ideas are welcome, as I would HATE to goto the stock rom and not have root.....
FEATURES
Based on Vanir by mkaluza.
Installation script edited in order to avoid any type of error.
Gapps included.
Most of system apps removed.
Ringtones removed.
Stagefright 2.0 vulnerability fixed.
Screen tearing fixed.
Gesture typing fixed.
Android Marshmallow boot animation.
SCREENSHOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FILES
Vanir.zip (MD5: b2a8128d88b0a1464967dc83e1de2b63)
update.zip (MD5: 46462d594027bc82e0a18025c7916e0c)
I9070P.zip (MD5: 61dab6926ba5680fc0087d4e2d62921e)
WARNING
Not compatible with Gingerbread.
INSTALLATION WITH CUSTOM RECOVERY
Do a factory reset.
Install Vanir.zip.
If you have an I9070P, install I9070P.zip.
INSTALLATION WITH SAMSUNG RECOVERY
Download Vanir.zip and update.zip.
If you have an I9070P, download I9070P.zip.
The files must be placed on microSD.
Boot your phone to recovery.
apply update from external storage
update.zip
wipe data/factory reset
Yes -- delete all user data
install zip from sdcard
choose zip from sdcard
Vanir.zip
Yes - Install Vanir.zip
If you have an I9070P, continue with:
choose zip from sdcard
I9070P.zip
Yes - Install I9070P.zip
Touch the Back soft key.
reboot system now
CREDITS
Modded by Gargaros: http://www.androidiani.com/forum/mo...9070-p-kk-4-4-4-vanir-gargaros-s-advance.html
Nice!!!
Do I need to root before installation?
Yes, root is needed.
What recovery is in update.zip?
EDIT: It contains CWM v.6.0.2.8
Armando84 said:
Do I need to root before installation?
Click to expand...
Click to collapse
Root is not needed. Just follow the installation's steps, this rom is the easiest to install!
You were right, no need for root, installation was a breeze. Thanks for sharing this rom, it's very fast!:good: Another question: can you recommend me a good music player app?
https://play.google.com/store/apps/details?id=com.kabouzeid.gramophone
Finallu I van considee janice is not dead there are some legendery people who are still keeping it alive .Big thanks to the devloper
Sorry for my bad english:-[
True, they are legends and thanks to them our phone still works decently.
While we wait for Epirex's CyanogenMod 13, I'm more then happy with this rom.
Cassiusss said:
FEATURES
Based off CyanogenMod 11 by Team Canjica.
Most of system apps removed (you can find better alternatives on Play Store).
Stagefright vulnerability fixed.
SystemUpdateService wakelock fixed.
Call recording enabled for all regions.
Nova Launcher as default launcher.
MK Kernel included.
Gapps included.
Android Marshmallow boot animation.
FILES
CM11.zip (MD5: 8ecb0a1f34684c11d085702c1e2583e8)
teeI9070P.zip (MD5: 0ec6f4681d13362f026d317a66ac96db)
update.zip (MD5: 46462d594027bc82e0a18025c7916e0c)
WARNING
Not compatible with Gingerbread.
INSTALLATION WITH CUSTOM RECOVERY
Do a factory reset.
Install CM11.zip.
If you have an I9070P, install teeI9070P.zip.
INSTALLATION WITH SAMSUNG RECOVERY
Download CM11.zip and update.zip.
If you have an I9070P, download teeI9070P.zip.
The files must be placed on microSD.
Boot your phone to recovery.
apply update from external storage
update.zip
wipe data/factory reset
Yes -- delete all user data
install zip from sdcard
choose zip from sdcard
CM11.zip
Yes - Install CM11.zip
If you have an I9070P, continue with:
choose zip from sdcard
teeI9070P.zip
Yes - Install teeI9070P.zip
Touch the Back soft key.
reboot system now
CREDITS
Full credits to Team Canjica, mkaluza and Shaaan.
Modded by Gargaros.
Click to expand...
Click to collapse
Send me some screenshots
This rom looks like any other CyanogenMod 11: the modder hasn't made aesthetic changes (except boot animation). But if you still want to see something in particular then let me know and I'll provide you screenshots.
Cassiusss said:
This rom looks like any other CyanogenMod 11: the modder hasn't made aesthetic changes (except boot animation). But if you still want to see something in particular then let me know and I'll provide you screenshots.
Click to expand...
Click to collapse
I want some screenshots
Well... since you don't have any particular request, here some random screenshots:
http://imgur.com/I4e2A9V
http://imgur.com/O9t4yZV
http://imgur.com/UWppK0b
May I know default recovery that is embedded in Rom Mods above? Is that still the CWM or the latest vers of TWRP? Thanks In Advnc.
Still the CWM.
Cassiusss said:
store/apps/details?id=com.kodarkooperativet.blackplayerfree
Click to expand...
Click to collapse
Great one, thank you so much!:highfive:
how much is the RAM with this one ?
Ram usage at the bottom of the screenshot:
Hi, my friend. Is this ROM compatible with f2fs? Thanks in advance
Sent from my GT-I9070 using XDA Free mobile app
THIS IS AN OS WHICH I AM USING FOR DAILY USES AND NOW I AM SHARING WITH YOU GUYS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
Code:
/*
*
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support
DotExtras !!
CLEAN FLASH :
USE TWRP TO FLASH
Download the latest build and GApps
Reboot to recovery
Make TWRP backup (EFS and MODEM partaion Necessary if SIM not Detected)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !
Download ROM:http://www.mediafire.com/file/rn4e6jj13343to5/DOT-N-v1.2-20180411-n7100-UNOFFICIAL.zip
Download Gapps:
Note : Pico or Nano Gapps are recommended. We Don't prefer STOCK/HEAVY Gapps
OpenGApps
DO NOT EDIT OR MODIFY THIS ROMThank you. Hope you like it until I develop an oreo ROM.
XDA:DevDB Information
[ROM][7.1.2_r29] dotOS-v1.2 [N7100][28-12-2074], ROM for the Samsung Galaxy Note II
Contributors
santosh61
Source Code: https://github.com/DotOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LOS
Version Information
Status: Nightly
Created 2018-04-11
Last Updated 2018-04-11
Screenshots:
Downloading, will try it now
Upd. Flashed it abd the speed of system, animations is so incredible! I can just say one thing "WOW" ! nice work Santosh:victory:
Awesome work! @santosh61
Fantastic bro @santosh61, will download it and give you my feedback, and waiting for oreo, good luck dude
Keep going ??
Nice work !! @santosh61
Any bugs we have to know?
Standard nougat ones?
I got first problem with systemUI. Attached logcat. :silly:
Deleted
Downloading now. I hope this will last rom I will install
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Yes same with me.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Dxnxsh said:
Yes same with me.
Click to expand...
Click to collapse
Same here guys. I attached logcat file on previous page.
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
AL-Hasani said:
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
Click to expand...
Click to collapse
if you look in the OP (first post made by the developer) you will see this:
'''Make TWRP backup (EFS and MODEM partition Necessary if SIM not Detected)''
what does it mean?
Have you made a EFS and Modem backup with TWRP before flash the rom?
Then reboot to recovery and flash the back up back , because your EFS and Modem partition has been corrupted and you cannt be registerd to your mobile network.
if you dont have a EFS and Modem back up, the only way(s) I know to restore that are:
1. Reflash a known working rom that you previous had in your phone
after flash rom reboot in recovery and see if then you can take back your EFS and modem.
IF YOU DO, then your problem is solved. But if NOT,
2. FLASH STOCK ROM with odin, let it boot once and see if your sim card is recognized and you can registered to your network. If yes, flash TWRP with odin again.
Reboot in recovery, BACKUP your EFS and Modem partition, save it in 2-3 positions (ext sdcard, PC, cloud) and then continiue your custom rom flashing.
If in any of these need some help, just ask for more details
GOOD LUCK my friend
logosA said:
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Click to expand...
Click to collapse
I'm using lineage su add-on.
nNeFeroN said:
I'm using lineage su add-on.
Click to expand...
Click to collapse
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
logosA said:
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
Click to expand...
Click to collapse
Everything is stock. Nothing has been change in system except installing su add-on.
I reflashed ROM, everything worked. But after few hours QS tiles settings started to crash again.
Maybe it is lineaguSu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to RAGUX ROM! This rom is a new rom that is made for SM-G9250!! (zeroltechn)
This project is a rom that wants to give you a S7 Experience, smooth, gaming, and happy experience for you
BASED on lastest firmware of s6 edgeG9250ZTU2ERF1
Pre-Rooted ROM!!! with super SU
Stock S6 kernel
With S7 Application
New S7 Edge Camera
New android 8.0 Boot animation
Known Bug and Problems
- if Install on G925I it Will not working
- Sometimes the camera app will be closed strangely
- Super SU sometimes will show up no root detected (fixed)
- (You tell me :/ )
Downloads
Gdrive (release v1.1)
(note: Because of release v1.2 cannot boot into the system, so the download link have been deleted immediately!)
Gdrive (release v2.0)
released for S7E, ONE UI Rom, check s7e for snapdragon android development
Special Thanks:
You
Changelog:
v0.1 beta:
Stock S6 kernel
With S7 Application
New S7 Edge Camera
New android 8.0 Boot animation
Rooted with SU
v1.0 first release
(broken download link)
version 1.1 (2022/01/28)
Fixed download link broken
*change boot from black to white
V1.2 (2022/02/18)
*Fixed camera cannot open error
*Stuck on the booting screen
*Bugs and error fixed
V2.0 (Will be a small important release) planned*
*Will be update the old camera app
*Change the white boot animation to dark
(will keep the android 8 boot animation)
*Will check bugs and errors!
Notes: the v2.0 changelog are not the final feature! it is still in a (thinking) progress!
Extras
Twrp download link:
https://forum.xda-developers.com/t/...8-7-0-recovery-for-s6-edge-hk-version.4381675
Must be downgraded to android 5.0.2/5.1.1 before flash
Hello, I tried your twrp 2.8.7.0, I want to it, but I saw a twrp 3.2 image that is in img formatted, how can I flash it?
NuPower2021 said:
Hello, I tried your twrp 2.8.7.0, I want to it, but I saw a twrp 3.2 image that is in img formatted, how can I flash it?
Click to expand...
Click to collapse
um, thanks for installing my rom, but I don't know what you want to, maybe you want to know how to flash it? here is the solution
1. boot into twrp2.8.7.0
2. press install and press 鏡像包
3. put the img file from your PC to your s6 edge
4. press the img file on s6 edge
5.press recovery and flash
不知道您能不能看懂中文，您的链接里找不到rom，并且之前TWRP的帖子里也没用TWRP3.2的IMG文件
Translated by GT: I don’t know if you can read Chinese, you can’t find the rom in your link, and the TWRP3.2 IMG file is not used in the previous TWRP post.
Mahaihe said:
不知道您能不能看懂中文，您的链接里找不到rom，并且之前TWRP的帖子里也没用TWRP3.2的IMG
Click to expand...
Click to collapse
可能我弄錯了小小東西，我會很快修正的。。
Translated by GT: Maybe I made a mistake on a little thing, and I will fix it soon. .
@Mahaihe Thanks for reporting the problem. the download link have been posted
Nice Rom! But the S7 camera is the old build.. can you restore the camera build to the latest version? I cannot update it! thanks a lot1
(EVIL RYU) said:
um, thanks for installing my rom, but I don't know what you want to, maybe you want to know how to flash it? here is the solution
1. boot into twrp2.8.7.0
2. press install and press 鏡像包
3. put the img file from your PC to your s6 edge
4. press the img file on s6 edge
5.press recovery and flash
Click to expand...
Click to collapse
And about the twrp recovery, it said like (E:\ failed to mount) , Is there any way to fix it? thank you again!
UserStrange said:
Nice Rom! But the S7 camera is the old build.. can you restore the camera build to the latest version? I cannot update it! thanks a lot1
Click to expand...
Click to collapse
UserStrange said:
And about the twrp recovery, it said like (E:\ failed to mount) , Is there any way to fix it? thank you again!
Click to expand...
Click to collapse
Hello! About the old s7 camera app problem, thanks for reporting it! This feature will be added in the V2.0 small feature update build! and the twrp recovery error, you can try these steps to fix it:
Method that will be working:
1. goto your twrp 2.8 recovery menu, press wipe
2. then it will prompt a screen that tell you to swipe to factory reset, don't swipe it!, press the format data
3. Then swipe to do it!
4. after all, reboot to recovery again, and follow the step again
5. your twrp 3.2 recovery will be working again!