Related
DO NOT FLASH THIS UPDATE UNTIL YOU HEAR FROM THE BIG GUNS OR RISK LOSING YOUR ROOT!
Please Be Patient!!!!
Sprint is pushing out a system update this morning with a size 21.43mb
Update Download Links:
http://www.mediafire.com/file/2myavzqygir/OTA_Supersonic_1.47.651.1-1.32.651.6_releaseq2wpcb5jl7uowah9.zip Thanks Calkulin!
http://www.sdx-downloads.com/sdx/evo/stock/OTA_Supersonic_1.47.651.1-1.32.651.6_release.zip Thanks Joeykrim!
Firmware Version
2.1-update1
Baseband Version
2.05.00.06.10
Kernel Version
2.6.29-789bf291
[email protected] #1
PRI Version 1.40_003
PRL Version 60667
Thank you joeykrim for the following:
RADIO - the radio is updated through a radio.diff.
SYSTEM - no system/app files are changed
it appears this OTA is much more extensive than the previous OTA.
this one appears to apply small patches to every application in /system/app. a few are large in size, but most are very small.
it also appears to patch:
16 files in system/bin
etc/wimax/
etc/firmware/fw_bcm4329.bin and (ap)
31 files in framework
28 files in lib
2 files in lib/modules - bcm4329.ko and sequans_sdio.ko
SYSTEM updated files (might be more, researching now):
wifi module - BCM4329B1_002.002.023.0396.0402.hcd
android.hardware.camera.flash-autofocus.xml
android.hardware.telephony.cdma.xml
ton of framework files
libCamera_donut.so
libCamera_eclair.so
Fixes & Bugs:
From user npace: (I extracted and fastboot flashed the kernel zImage. Here's a rundown of the issues that I tested for fixes
1. Touch input lag -- fixed -- tried with multitouch visualizer 2
2. Improperly grounded touchscreen -- fixed -- tried on multiple surfaces
3. 30 fps cap -- still there
same radio by your title?
Appears to be. I am waiting for it to finish downloading and I will attempt to upload.
This thread will probably be moved / deleted but I was just letting everyone know. Personally I am going to wait to hear from the Dev's on this download before even touching it.
is this breaking root access.. some unrevoked users via face book saying unrevoked is no longer working.. i guess they should have went all out and did the full root
danon.brown said:
is this breaking root access.. some unrevoked users via face book saying unrevoked is no longer working.. i guess they should have went all out and did the full root
Click to expand...
Click to collapse
Even if you rooted via toasts method, i would not update until a custom ROM is put out with the update included. You could lose root ability forever.
Anyone know the location of system updates are stored on the phone? I am trying to locate using the adb shell but have had no luck finding the download yet.
huoter said:
Appears to be. I am waiting for it to finish downloading and I will attempt to upload.
This thread will probably be moved / deleted but I was just letting everyone know. Personally I am going to wait to hear from the Dev's on this download before even touching it.
Click to expand...
Click to collapse
can you post this OTA .zip?
joeykrim said:
can you post this OTA .zip?
Click to expand...
Click to collapse
Its done downloading, just trying to find the darn file right now. Any ideas?
Awaiting an update zip
Here's the untouched update zip for those that want it. If you want to put it in the OP, feel free to
OTA_Supersonic_1.47.651.1-1.32.651.6_releaseq2wpcb5jl7uowah9.zip
huoter said:
Its done downloading, just trying to find the darn file right now. Any ideas?
Click to expand...
Click to collapse
i didn't look into the last one and this is my first HTC phone so im not familiar with their OTA process.
perhaps try /cache? or any type of temp directory on /data or /sdcard?
we know it won't be on /system.
We install this from recovery, right?
herzzreh said:
We install this from recovery, right?
Click to expand...
Click to collapse
Don't install anything until some devs have had a look around--they'll make a package to flash when it's safe.
herzzreh said:
We install this from recovery, right?
Click to expand...
Click to collapse
I'd recommend not installing it at all until the devs here have had a chance to go through it and release it themselves. You risk loosing your root if you don't. Then follow their release instructions to apply it.
Btw the radio is 2.05.00.06.10 with this update.
Sent from my EVO using Tapatalk
Shidell said:
Don't install anything until some devs have had a look around--they'll make a package to flash when it's safe.
Click to expand...
Click to collapse
I don't care if I lose root. I assume this update doesn't reinstall Sprint junk, so I'm good to go. That was the only reason why I wanted root access...
donatom3 said:
Btw the radio is 2.05.00.06.10 with this update.
Sent from my EVO using Tapatalk
Click to expand...
Click to collapse
if you've applied this, can you take a screenshot of the about phone -> software versions or manually type all the info up on here?
im wondering about the PRI ...
herzzreh said:
I don't care if I lose root. I assume this update doesn't reinstall Sprint junk, so I'm good to go. That was the only reason why I wanted root access...
Click to expand...
Click to collapse
No, looks like just about all the preloaded APK's are in there, including the Sprint crap. I assume if you apply it as stock you'll get them back, but I could be wrong.
herzzreh said:
I don't care if I lose root. I assume this update doesn't reinstall Sprint junk, so I'm good to go. That was the only reason why I wanted root access...
Click to expand...
Click to collapse
The official froyo release from HTC / Sprint will definitely contain all the "Sprint Junk" and if you've given up root to one of these updates and go to apply that it will all come back. You may never get root again in order to re - clean it up once you apply froyo.
Be patient. It won't take the devs here long to cook up an update for us. Flipz had the rooted .6 update rom out in 24 hours or so...
.....
Just took a look inside the zip file. All the apk files are there, including the sprint junk...
Just installed....all is well with root...
This is MIUI For the ONE S C2, It is based on bilal_liberty's CM10 Rom so expect similar performance and bugs. You will be running Android 4.1.2 With MIUI For Jelly Bean. It is currently not tested so make a full backup before you flash it, also do a logcat and post it if you can so we fix the issue if you have one.
Notice - This Rom has currently not been tested so use at your own risk, this is why it is labelled TEST.
Download - Soon
How To - To install this ROM just follow the usual way, Back up, Flash Rom, Clear Cache and everything and then boot.img.
V1.3 - Flashes, Boots but force closes and not stable, will release soon.
V1.2 - Re worked Port added, Not sure if issue has been fixed, you tell me.
V1.1 Test - Flashable .ZIP available but issues with flashing.
V1 Test - Launch
[removed]
clewis said:
Hmmm so there is already a miui rom....
But about my rom, i got an error on flash, it did start booting with the boot animation but got stuck.
Click to expand...
Click to collapse
use logcat to see whats going wrong
adb logcat > logcat.txt
http://forum.xda-developers.com/showthread.php?t=1726238 for more info
bilal_liberty said:
use logcat to see whats going wrong
adb logcat > logcat.txt
http://forum.xda-developers.com/showthread.php?t=1726238 for more info
Click to expand...
Click to collapse
I am doing a new build at this time i think i did something wrong the first time, so im going to add another unsigned file in a minute if you or someone else could make it a flashable zip and do a logcat when you do to save time would be good help, ill edit this page when it goes live on dropbox.
BTW this is how im trying to port it if anyone else wants a go - http://forum.xda-developers.com/showthread.php?t=1994503
For making flashable zip just select meta-inf folder system folder and boot.img and add them archieve, there is nothing extra to do.
bilal_liberty said:
For making flashable zip just select meta-inf folder system folder and boot.img and add them archieve, there is nothing extra to do.
Click to expand...
Click to collapse
Alright mate i have taken other one down and put a flashable zip on dropbox its going up now i can't try it myself as i dont have a usb cable that works to flash the boot.img so could someone else test it when it is uploaded.
clewis said:
Alright mate i have taken other one down and put a flashable zip on dropbox its going up now i can't try it myself as i dont have a usb cable that works to flash the boot.img so could someone else test it when it is uploaded.
Click to expand...
Click to collapse
Updated Flashable .Zip - https://www.dropbox.com/s/umsohpgmn1hh2z2/miui_unsigned.zip
Again use at your own risk, this has not been tested also everyone that does give it a try do a logcat so we can see if there is any problems.
Installation failed.
"set_perm: some changes failed"
"E:Error in /sdcard/miui_unsigned.zip"
work for old hboot??
DeanderDean said:
Installation failed.
"set_perm: some changes failed"
"E:Error in /sdcard/miui_unsigned.zip"
Click to expand...
Click to collapse
There is problem in updater script.try fixing permissions in updater script
u can use updater script from this to solve flash problems:
http://pan.baidu.com/share/link?shareid=341288&uk=4112589721 by jswei521
Great Work Man!!
Thanks for the port. I will test soon.
Sent from my HTC One S using xda app-developers app
bilal_liberty said:
u can use updater script from this to solve flash problems:
http://pan.baidu.com/share/link?shareid=341288&uk=4112589721 by jswei521
Click to expand...
Click to collapse
This rom from the above links works well, ive tried it.
Is old hboot 2.09 supported ?
can we flash this over 4.0.3 or do we need 4.0.4 as base ?
Paint in more detail information on ROM.
From what device port that was done, lay out screenshots, competently issue a post, write the detailed instruction. That works that doesn't work.
Thanks.
bilal_liberty said:
This rom from the above links works well, ive tried it.
Click to expand...
Click to collapse
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Paint in more detail information on ROM.
From what device port that was done, lay out screenshots, competently issue a post, write the detailed instruction. That works that doesn't work.
Thanks.
Click to expand...
Click to collapse
Dont worry i will when i get it all up and running, its only a test version at this time. I have never made a ROM before and i have only published it this earlier because i need help in development which i am getting .
clewis said:
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Dont worry i will when i get it all up and running, its only a test version at this time. I have never made a ROM before and i have only published it this earlier because i need help in development which i am getting .
Click to expand...
Click to collapse
Well, we wait for registration and the instruction, it will exclude many questions.
LeiManPRO said:
Well, we wait for registration and the instruction, it will exclude many questions.
Click to expand...
Click to collapse
I have registered and replied to a the original thread, got the download link and when i go to it i get an error, it's not there for me, if anyone has it please send the update script to me, i can't fix anything without that file.
clewis said:
Im getting an error?type=1 link when i go to that page, if you could attach the updater script so i could just switch them would be a big help.
Click to expand...
Click to collapse
Here u go best of luck
Edit: if you want some files from that rom here it is: http://www.mediafire.com/?mb04ljce767sd8m
bilal_liberty said:
Here u go best of luck
Edit: if you want some files from that rom here it is: http://www.mediafire.com/?mb04ljce767sd8m
Click to expand...
Click to collapse
Awesome mate, doing edits tonight will upload later.
Is it possible to insert the SuperSU Pro Key to flashable SuperSU (maybe with a little bit modification in the script?) so whenever I flash it, it is in Pro version automatically? No need for separate installation...
Odlanyer22 said:
Is it possible to insert the SuperSU Pro Key to flashable SuperSU (maybe with a little bit modification in the script?) so whenever I flash it, it is in Pro version automatically? No need for separate installation...
Click to expand...
Click to collapse
Why do you want pro.... You can enable all pro feature with out having pro key..... Check settings... It has an option for this...
Killwish said:
Why do you want pro.... You can enable all pro feature with out having pro key..... Check settings... It has an option for this...
Click to expand...
Click to collapse
So true sir...
There's no reason to answer why would I go to pro when I can enable pro features for free,,, when I have already the key.
What really matter for now is, if it possible to flash 2 apk in just 1 flashable zip.
I think its possible (somehow)... but I don't know how to create flashable zip. Moreover, I really don't know how to create additional script (or what script to be added) needed to be used in order for key be installed too while SuperSU is being flashed.
Seems like, I what to learn on how to create script that will command to install SuperSU then the key afterwards.
If I'm not mistaken (as I am not a developer or what but a totally noob)... commands/scripts in a flashable zip are written in .sh file?
Odlanyer22 said:
So true sir...
There's no reason to answer why would I go to pro when I can enable pro features for free,,, when I have already the key.
What really matter for now is, if it possible to flash 2 apk in just 1 flashable zip.
I think its possible (somehow)... but I don't know how to create flashable zip. Moreover, I really don't know how to create additional script (or what script to be added) needed to be used in order for key be installed too while SuperSU is being flashed.
Seems like, I what to learn on how to create script that will command to install SuperSU then the key afterwards.
If I'm not mistaken (as I am not a developer or what but a totally noob)... commands/scripts in a flashable zip are written in .sh file?
Click to expand...
Click to collapse
There is no ne to do this...... Just select any apk file abd put it to /system/app folder and restart your device
Would like to further understand something from this too
(i do have linux background)
Technically speaking, what is a rooted device? Is it having the su binary available? Is that what it means?
But then, supersu says that it needs a 'rooted device'.. this is quite rather confusing. doesnt supersu provide root access to apps?
couldnt you combine the key and the app using lucky patcher or a diffrent method?
My device:
Samsung Galaxy S2 Skyrocket (rooted)
Rom:AOSP
Carrier:At&t
Dont forget to thank me if i helped
Killwish said:
There is no ne to do this...... Just select any apk file abd put it to /system/app folder and restart your device
Click to expand...
Click to collapse
No luck... I flashed the SuperSU then push the key to system/app but the key didnt install itself.
That is why I am trying to fig.out how can I insert the key from the flashable zip.
biatche said:
Would like to further understand something from this too
(i do have linux background)
Technically speaking, what is a rooted device? Is it having the su binary available? Is that what it means?
But then, supersu says that it needs a 'rooted device'.. this is quite rather confusing. doesnt supersu provide root access to apps?
Click to expand...
Click to collapse
Not so sure, but a rooted device means having both the su binary and the root access manager (supersu)...?
shadowcreeper_1 said:
couldnt you combine the key and the app using lucky patcher or a diffrent method?
My device:
Samsung Galaxy S2 Skyrocket (rooted)
Rom:AOSP
Carrier:At&t
Dont forget to thank me if i helped
Click to expand...
Click to collapse
I'll thank you if you could give me the procedure on how to combine the key. (Or if I searched for it for giving me an idea)... I havent used Lucky Patcher before. If I am able to combine the two in just 1 apk, then I might just replace the existing apk from the flashable zip so when I flashed it, its in pro version automatically.
Odlanyer22 said:
No luck... I flashed the SuperSU then push the key to system/app but the key didnt install itself.
That is why I am trying to fig.out how can I insert the key from the flashable zip.
Not so sure, but a rooted device means having both the su binary and the root access manager (supersu)...?
I'll thank you if you could give me the procedure on how to combine the key. (Or if I searched for it for giving me an idea)... I havent used Lucky Patcher before. If I am able to combine the two in just 1 apk, then I might just replace the existing apk from the flashable zip so when I flashed it, its in pro version automatically.
Click to expand...
Click to collapse
ill do a little research on that, never attempted it myself but i hear you can and ive seen it happen
My device:
Samsung Galaxy S2 Skyrocket (rooted)
Rom:AOSP
Carrier:At&t
Dont forget to thank me if i helped
shadowcreeper_1 said:
ill do a little research on that, never attempted it myself but i hear you can and ive seen it happen
My device:
Samsung Galaxy S2 Skyrocket (rooted)
Rom:AOSP
Carrier:At&t
Dont forget to thank me if i helped
Click to expand...
Click to collapse
Ah no problem...
Let me research for that by myself.
So far, giving me an idea nearest to what I want to happen is a big help.
I'll give thanks, then.
UPDATE:
According to chelpus(DOT)defcon5(DOT)biz ...that was an exception to the capability of Lucky Patcher. It cannot be patched when the apps are in two parts (apk and pro key)... Btw, still thanks to everyone who effort to helped me.
Waiting for one who can really help me out for what I want.
Odlanyer22 said:
Ah no problem...
Let me research for that by myself.
So far, giving me an idea nearest to what I want to happen is a big help.
I'll give thanks, then.
UPDATE:
According to chelpus(DOT)defcon5(DOT)biz ...that was an exception to the capability of Lucky Patcher. It cannot be patched when the apps are in two parts (apk and pro key)... Btw, still thanks to everyone who effort to helped me.
Waiting for one who can really help me out for what I want.
Click to expand...
Click to collapse
Brother I tried this and it works for me.... You have to restart after putting apk file to system/app folder
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
Odlanyer22 said:
No luck... I flashed the SuperSU then push the key to system/app but the key didnt install itself.
That is why I am trying to fig.out how can I insert the key from the flashable zip.
Not so sure, but a rooted device means having both the su binary and the root access manager (supersu)...?
I'll thank you if you could give me the procedure on how to combine the key. (Or if I searched for it for giving me an idea)... I havent used Lucky Patcher before. If I am able to combine the two in just 1 apk, then I might just replace the existing apk from the flashable zip so when I flashed it, its in pro version automatically.
Click to expand...
Click to collapse
Restart your device after putting apk to system /app folder
nthsfrn cels
Killwish said:
Brother I tried this and it works for me.... You have to restart after putting apk file to system/app folder
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
Click to expand...
Click to collapse
Are you really pertaining to "pro key" apk too or other apk file?
It works for other apk but didn't work for pro key apk (in my case)...
AND I am wrong for my term "push" when I did not actually push it, but rather flashed it...
I flashed it right after flashing flashable SuperSU.
I placed the pro key inside a zip file>system>app (Idk where that zip file originated)... then flashed it
(all via cwm recovery).
(Btw, that zip file is really meant to flash apk to system/app or system/framework if you are afraid to push.)
Then after that, "reboot system now".
Viola! Nothings happen, but to go to system/app (look for the pro key) then install it there then restart.
(It works after that.)
..
Killwish said:
OK bro I have made flashable zip supersu.
Its here
View attachment 2841612
It is super user 2.01 pro
Flash it with any custom recovery
Click to expand...
Click to collapse
downloading and will try it later:good:
Killwish said:
OK bro I have made flashable zip supersu.
Its here
View attachment 2841612
It is super user 2.01 pro
Flash it with any custom recovery
Click to expand...
Click to collapse
OMG!
Downloading and try it ASAP...
FEEDBACK:
It doesn't work. Maybe you just put the pro key inside the zip and you didn't even bother to modify the script so its useless.
Only free version will going to install in the end.
Odlanyer22 said:
OMG!
Downloading and try it ASAP...
FEEDBACK:
It doesn't work. Maybe you just put the pro key inside the zip and you didn't even bother to modify the script so its useless.
Only free version will going to install in the end.
Click to expand...
Click to collapse
Not just copy pasted...... Sorry for that but now i updated file again...
Download again that file
this time 100% working
Killwish said:
Not just copy pasted...... Sorry for that but now i updated file again...
Download again that file
this time 100% working
Click to expand...
Click to collapse
Sorry!
Ok, I'll try to redownload...
Btw, thank you very much for the effort sir!
Killwish said:
OK bro I have made flashable zip
Its here
UPDATED
It is super user 2.01 pro
View attachment 2841940
Flash it with any custom recovery
Click to expand...
Click to collapse
Maybe you're unaware of this but i think you should remove this download immediately, you're givivg away the pro version for free
respawn
harrymason37 said:
Maybe you're unaware of this but i think you should remove this download immediately, you're givivg away the pro version for free
respawn
Click to expand...
Click to collapse
Okk ... I'll ... thank you sir
biatche said:
Would like to further understand something from this too
(i do have linux background)
Technically speaking, what is a rooted device? Is it having the su binary available? Is that what it means?
But then, supersu says that it needs a 'rooted device'.. this is quite rather confusing. doesnt supersu provide root access to apps?
Click to expand...
Click to collapse
Yes, exactly.
The problem is that people have adopted the term rooted to also mean access to the root of the filesystems, iow, the / directory. ("Just place this file on the root of your SD card," being the most common example of that usage.)
Anyway, with / access you can remount /system to rw instead of ro, and from there you can install the su binary (either in /system/bin or /system/xbin depending on how the dev made the installer).
The apk is simply the front end (user facing) management layer.
And then toss in the common Linux misunderstanding that's bled over to Android that su stands for super user. It doesn't, it stands for set user, but without arguments (the way most people have seen it) defaults to setting you to the root user.
As a Linux user, it might be just as well to think of the apk as your sudo access assistant, and to think of the grant/deny popup as analogous to confirming access with your password.
If you haven't already, install a good busybox (I prefer this one) -
Check out "BusyBox"
https://play.google.com/store/apps/details?id=stericson.busybox
And then Terminal Emulator and look around just as you would on Linux.
Your filesystem layout will make more sense one you use the df and mount commands there.
Hope this helps.
PS - Also, a thank you for taking down the pro download.
harrymason37 said:
Maybe you're unaware of this but i think you should remove this download immediately, you're givivg away the pro version for free
respawn
Click to expand...
Click to collapse
Let me be the one to apologize sir.
He just helping me out. But I do understand it too...
I really sorry!
And finally, it works 100%
All I want to know now is how did he insert the pro key. XD
So I can do it by myself anytime.
[CASE CLOSED]
As we have all seen with this latest STOCK G935U [BQD2] Firmware for T-Mobile indeed it runs smooth and personally I have experienced better performance without all those carrier-bloat applications by default. Dating a week ago, I tried to root this build version and for some reason I experienced infinite bootloops after my device boots up. So I did some research as to what system apps could be causing this I still I can't believe that a network-related system application was causing this issue.
I am talking about com.samsung.sprint.chameleon as mentioned by @qwewqa here -> https://forum.xda-developers.com/tmobile-s7-edge/how-to/4-28-t-mobile-935-firmware-t3597866/page10
I will not go in-depth about what this is but this relates to a network configuration. I will post a reference on this if you guys feel like checking out...
https://community.sprint.com/t5/Archives/Chameleon/td-p/654097
FAST & STABLE ROOT METHOD FOR THE G935U under T-Mobile // S7 EDGE
1 - Download & Flash Via Odin the latest Firmware provided on this post. Thanks to @justda
https://forum.xda-developers.com/tmobile-s7-edge/how-to/4-28-t-mobile-935-firmware-t3597866
------------ HERE COMES THE MOST IMPORTANT STEP ON THIS GUIDE ----------​
2 - Install Package Disabler Pro from OSPolice. Play Store link ...
https://play.google.com/store/apps/details?id=com.ospolice.packagedisablerpro&hl=es
3 - Open the application, activate Device Administrator, just hit next or ok or just follow through the setup and once the apps list loads up look for the system app with the name of: com.samsung.sprint.chameleon. Go ahead clear data and DISABLE it. After you are done disabling this system app, you are now safe and good to follow through the root method below.
4 - I suggest that you use the root.bat file provided by @Quickvic30 on this thread to root your device
https://forum.xda-developers.com/tmobile-s7-edge/how-to/heres-how-rooted-nougat-s7-edge-g935t-t3567502
IF YOU HAVE SUCCESSFULLY BOOTED UP YOUR DEVICE PAST THE SAMSUNG SCREEN WITHOUT ENDING UP IN BOOTLOOPS (Bootloops may occur within 30 seconds after booting up from the Samsung Screen) THATS IT, YOU ARE DONE!
### Post-Root Suggestions ###
Applications to Install:
Titanium Backup
Kernel Adiutor
L-Speed
SD Maid
THE FOLLOWING XML DEBLOAT PACKAGE IS FOR THOSE WHO ARE LOOKING INTO DISABLING THE MOST PACKAGES INCLUDING SOME STOCK APKS. PLEASE CAREFULLY GO OVER THE LIST ATTACHED AND JUST CONTINUE ON TO MAKE ANY MODIFICATIONS TO FIT YOUR NEEDS
### DEBLOATER FOR PACKAGE DISABLER PRO - SAFE TO DISABLE APPS & SYSTEM APPS [~1950 MB RAM FREE - SOMETIMES 2000 MB's] ###
Attached is the xml file for Package Disabler Pro that will free ~ 2 GB RAM on your device.
Since I don't see any mention of using the engineering kernel should I assume this method does not work for US models?
So basically you take qwewqa's discovery, make no mention of him, then pass it off as your own. Then copy and paste some steps from other people, and submit it as your work?
markmain2. 0 said:
Since I don't see any mention of using the engineering kernel should I assume this method does not work for US models?
Click to expand...
Click to collapse
As referred in the procedure section. The main and original root method goes to the forum thread linked above. As I briefly specified in the background info section, this is just a quick fix in performance and stability when applying root to this build.
tofu- said:
So basically you take qwewqa's discovery, make no mention of him, then pass it off as your own. Then copy and paste some steps from other people, and submit it as your work?
Click to expand...
Click to collapse
I didn't copy nor plagiarize any information from their respective owners. Credits are given, very briefly detailed information on the steps as to the main reason of this thread is just giving the list and proceed with the order of steps to successfully achieve root. The link that I attached in regards to the conflicting system app that where I noticed the issue with other models.
I didn't look into @qwewqa thread comment regarding this, and I apologize and edited to credit him on this finding.
The debloat list provided is extremely aggresive. It removes the stock gallery, stock calender, lock screen wallpaper, stock contacts, Bluetooth, and all google back up services.
Your list is great for the hardcore folks BUT you have to go back through the lost and re-enable the apps and clear the data then re disable them.
Sent from my SM-G935U using XDA Premium HD app
Brian,
Thanks for bringing it all together. I am currently rooted on T-Mobile QC1. I wanted to go to the U firmware wanted a tested way to root first.
Pat
Thank you kindly. Going to try this out right now
gonna give this a try, Any kernel tweak recommendations? how smooth/fast is it or does it lag like a bunch
any fix for the finger print sensor?
Im think the eng is conflicting with a app killing the fingerprint sensor
patcal said:
Brian,
Thanks for bringing it all together. I am currently rooted on T-Mobile QC1. I wanted to go to the U firmware wanted a tested way to root first.
Pat
Click to expand...
Click to collapse
Hey Pat,
In fact there is a way to root the U Firmware and achieve functionality and administration. All thanks to their devs for their work
black96ss said:
gonna give this a try, Any kernel tweak recommendations? how smooth/fast is it or does it lag like a bunch
Click to expand...
Click to collapse
As a matter of fact, the root.bat from @Quickvic30 does all the jobs needed. I strongly suggest running his method. No L Speed, no Kernel Adiutor. Just Titanium Backup to freeze/uninstall bloatware.
black96ss said:
gonna give this a try, Any kernel tweak recommendations? how smooth/fast is it or does it lag like a bunch
Click to expand...
Click to collapse
black96ss said:
any fix for the finger print sensor?
Click to expand...
Click to collapse
Hmmm...to be honest I didn't have any issues regarding the fingerprint sensor. Have you solved your issue by now?
Broken Fingerprint Sensor
purotijuana said:
Hmmm...to be honest I didn't have any issues regarding the fingerprint sensor. Have you solved your issue by now?
Click to expand...
Click to collapse
Yes, I also have the same problem. The fingerprint sensor has stopped working after flashing the Eng Bootloader.
Found the fix: Credits to qwewqa
Link
Dexolit said:
Yes, I also have the same problem. The fingerprint sensor has stopped working after flashing the Eng Bootloader.
Found the fix: Credits to qwewqa
Link
Click to expand...
Click to collapse
I tried to use this method but my phone won't let me change permissions. It pops up with a message that says "changing permissions was not successful. Please note that some file systems do not allow permission changes." Is there something special I need to do to enable permission changes?
Also I am using root browser to do this.
nickp22127 said:
I tried to use this method but my phone won't let me change permissions. It pops up with a message that says "changing permissions was not successful. Please note that some file systems do not allow permission changes." Is there something special I need to do to enable permission changes?
Also I am using root browser to do this.
Click to expand...
Click to collapse
Try another file browser. Root Explorer is what I have always used.
patcal said:
Try another file browser. Root Explorer is what I have always used.
Click to expand...
Click to collapse
Awesome man it worked! Thanks a lot. Root explorer seems pretty legit by the way. I've only ever used root browser.
nickp22127 said:
Awesome man it worked! Thanks a lot. Root explorer seems pretty legit by the way. I've only ever used root browser.
Click to expand...
Click to collapse
Glad it worked. I have been using Root Explorer for as long as I have been using & rooting android phones.
nickp22127 said:
I tried to use this method but my phone won't let me change permissions. It pops up with a message that says "changing permissions was not successful. Please note that some file systems do not allow permission changes." Is there something special I need to do to enable permission changes?
Also I am using root browser to do this.
Click to expand...
Click to collapse
I also had that problem too. Just extract the libs and overwrite them in /system/lib and /lib64, then change the permissions to rw-r--r--. Apparently, it only worked after overwriting the files.
Well although I planned to unlock bootloader after a few months I decided to grab the opportunity when unlock page started working and with the ultimatum by Huawei about providing unlock codes, but ever since I unlocked and fixed multiple boot loops I noticed few apps and features are now missing such as
HiFi Huawei sounds in Settings is gone
Unable to change or apply themes
smart remote Control is now gone,
Phone no longer stay awake while looking at it
There might be more stuff missing which I haven't noticed
I mean it feels absurd I just unlocked bootloader why are these stuffs missing this makes no sense to me, all I did is installed twrp, installed magisk no modules nothing, in fact, my favorite mods are giving boot loops anyway but that aside I do need the above things back please help out a friend, anyone else faced this ?
I have a theory like Miui had a "region" option and apps changes according to regions set. So does something like this happens in EMUI as well, I don't remember exactly but I believe I set region/language as the UK while completing the setup, if so how can I change it back(PS: I live in India)
or its the side effect of root perhaps?
PHONE: HONOR VIEW 10
Current EMUI ver:8.0
Varient:BKL-09(C675D2)
Current Version of Update:8.0.0.140
(--light--) said:
Well although I planned to unlock bootloader after a few months I decided to grab the opportunity when unlock page started working and with the ultimatum by Huawei about providing unlock codes, but ever since I unlocked and fixed multiple boot loops I noticed few apps and features are now missing such as
HiFi Huawei sounds in Settings is gone
Unable to change or apply themes
smart remote Control is now gone,
Phone no longer stay awake while looking at it
There might be more stuff missing which I haven't noticed
I mean it feels absurd I just unlocked bootloader why are these stuffs missing this makes no sense to me, all I did is installed twrp, installed magisk no modules nothing, in fact, my favorite mods are giving boot loops anyway but that aside I do need the above things back please help out a friend, anyone else faced this ?
I have a theory like Miui had a "region" option and apps changes according to regions set. So does something like this happens in EMUI as well, I don't remember exactly but I believe I set region/language as the UK while completing the setup, if so how can I change it back(PS: I live in India)
or its the side effect of root perhaps?
PHONE: HONOR VIEW 10
Current EMUI ver:8.0
Varient:BKL-09(C675D2)
Current Version of Update:8.0.0.140
Click to expand...
Click to collapse
Wow well I expected a better response from the community or some response for sure.. Well turns out these all apks were in data partition, so they got removed when phone storage was formatted, makes sense now
Extracted the apks and pushed them myself... Features are back
(--light--) said:
Wow well I expected a better response from the community or some response for sure.. Well turns out these all apks were in data partition, so they got removed when phone storage was formatted, makes sense now
Extracted the apks and pushed them myself... Features are back
Click to expand...
Click to collapse
No idea what kind of issues you had, but none of those vanished after unlocking my bootloader.
I've been able to use themes just like before, the display stays on when I look at it and those Huawei sounds in settings are still there as well. No idea about the remote since I never used it anyway.
So idk what went wrong on your phone but it doesn't look like that's anything "normal"
Help please !
Bro, can you please please please extract upload C675 system.img stock so that I can come back on stock?
(--light--) said:
Wow well I expected a better response from the community or some response for sure.. Well turns out these all apks were in data partition, so they got removed when phone storage was formatted, makes sense now
Extracted the apks and pushed them myself... Features are back
Click to expand...
Click to collapse
oreopie said:
Bro, can you please please please extract upload C675 system.img stock so that I can come back on stock?
Click to expand...
Click to collapse
c675 firmware is now available in firmware finder , but if u still need it let me know , i'll try upload it
Nimueh said:
No idea what kind of issues you had, but none of those vanished after unlocking my bootloader.
I've been able to use themes just like before, the display stays on when I look at it and those Huawei sounds in settings are still there as well. No idea about the remote since I never used it anyway.
So idk what went wrong on your phone but it doesn't look like that's anything "normal"
Click to expand...
Click to collapse
I am guessing it as per different variant, perhaps in mine these apk were in the data partition, Microsoft translator was missing as well
I pushed those apks extracting from firmware to the system partition and its back to normal
You are a savior then !
Yes bro, please upload it. It would be a pleasure for me and several others. I'm dying to get that.
(--light--) said:
c675 firmware is now available in firmware finder , but if u still need it let me know , i'll try upload it
Click to expand...
Click to collapse
oreopie said:
Yes bro, please upload it. It would be a pleasure for me and several others. I'm dying to get that.
Click to expand...
Click to collapse
I just realized the firmware on firmware finder seems rather incomplete, update.app is just 300 MB or so, no way it contains full system.img
so am gonna have to take twrp backup b ready for 3gb download, anything else u want other than the system?
From LOS to Stock
Thats not a problem bro, have a 50mbps 250gb monthly plan in broadband. Wanted you to know that I am coming from LOS to stock as much as I know it would require only system.img. But if you think anything else would be required, then please upload that too, as I have only the stock recovery and nothing else.
Thanks for your help !
oreopie said:
Thats not a problem bro, have a 50mbps 250gb monthly plan in broadband. Wanted you to know that I am coming from LOS to stock as much as I know it would require only system.img. But if you think anything else would be required, then please upload that too, as I have only the stock recovery and nothing else.
Thanks for your help !
Click to expand...
Click to collapse
https://drive.google.com/open?id=1_Boc9uk2CwrHzBgE-ljexntxuac9GOs0
here you go, its rar5 with high compression so PC is recommended for unzipping,
after unzip paste in twrp folder and restore
So i have to flash system image in fastboot i'm not wrong.. ? How to flash this zip ? Should i extract image from this ??
(--light--) said:
https://drive.google.com/open?id=1_Boc9uk2CwrHzBgE-ljexntxuac9GOs0
here you go, its rar5 with high compression so PC is recommended for unzipping,
after unzip paste in twrp folder and restore
Click to expand...
Click to collapse
oreopie said:
So i have to flash system image in fastboot i'm not wrong.. ? How to flash this zip ? Should i extract image from this ??
Click to expand...
Click to collapse
it is not flashable, just extract the content of the zip,
paste it in the twrp folder of the phone and use restore option of twrp
(--light--) said:
https://drive.google.com/open?id=1_Boc9uk2CwrHzBgE-ljexntxuac9GOs0
Click to expand...
Click to collapse
Mate, thank you for this upload. I am also having the same problems(C675). You are a life saver.
1. Could you please elaborate the steps in detail, where to place system.img in twrp folder(In Internal or sd card)?
2. Also what is the version u have uploaded mate(8.0.0.140/8.0.0.151)?
3. Also can you upload ramdisk, kernel, stock recovery also?
4. Is there any way to get FULLOTA-MF for India as provided in other regions?
Thank you.
I flashed it bro but no network.
I think I need radio/modem files.
Could you please upload? I'm waiting.
oreopie said:
So i have to flash system image in fastboot i'm not wrong.. ? How to flash this zip ? Should i extract image from this ??
Click to expand...
Click to collapse
oreopie said:
I flashed it bro but no network.
I think I need radio/modem files.
Could you please upload? I'm waiting.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1CzhlQcv6Ck-gzTTmk55D1NUUc0241EKi/view?usp=sharing
here you go , rest of the partitions
Do the same unzip in PC- Copy all these files inside twrp backup folder, go to twrp and use restore option hopefully it will work
this is 140 update backup I haven't received 151 officially due to unknown reasons, but I had made changes to my system partition so it contains almost all new features and fixes of 151 except the 3D creator cam,
3D creator is in my data partition which i did not backup
Hey, Are you sure taking restore of this one alongwith previous one will do the job ? I guess imei resides in efs partition which I cannot see here. Can you confirm this once please ?
and thanks for your time and effort bro
(--light--) said:
https://drive.google.com/file/d/1CzhlQcv6Ck-gzTTmk55D1NUUc0241EKi/view?usp=sharing
here you go , rest of the partitions
Do the same unzip in PC- Copy all these files inside twrp backup folder, go to twrp and use restore option hopefully it will work
this is 140 update backup I haven't received 151 officially due to unknown reasons, but I had made changes to my system partition so it contains almost all new features and fixes of 151 except the 3D creator cam,
3D creator is in my data partition which i did not backup
Click to expand...
Click to collapse
(--light--) said:
Wow well I expected a better response from the community or some response for sure.. Well turns out these all apks were in data partition, so they got removed when phone storage was formatted, makes sense now
Extracted the apks and pushed them myself... Features are back
Click to expand...
Click to collapse
Hey, could you share how did you manage to extract the apks? I downloaded the firmware using the Firmware Finder and found the HwRemoteController.apk but when I try to install it via adb I get a signature failure.
Mate, thank you for this upload.
1. Is there any way to get FULLOTA-MF for India as provided in other regions?
2. How to install the latest update with root?. Is there any solution available?
Jorooo87 said:
Hey, could you share how did you manage to extract the apks? I downloaded the firmware using the Firmware Finder and found the HwRemoteController.apk but when I try to install it via adb I get a signature failure.
Click to expand...
Click to collapse
U need to place them directly in /system/app
Or /data/apps and give permission rw-r--r--
Or try signing the apk it should work I guess if libs are not there
oreopie said:
Hey, Are you sure taking restore of this one alongwith previous one will do the job ? I guess imei resides in efs partition which I cannot see here. Can you confirm this once please ?
and thanks for your time and effort bro
Click to expand...
Click to collapse
Take your own backup first... Try installing only one partition at time... To be honest this EMUI is very new to me... Dont know y they made so many different partitions
Or maybe it's a kirin's thing... I should have just gone with Op5t like rest of the world... Its just chaos and confusion here