Hi,
I recently tried installing Twrp on my LG F60. It rebooted and now i always encounter a black screen with text after the LG logo.
[710] fastboot.init()
[710] Error: allocating memory for ssd buffer
[810] USB init ept @ 0x8f1ec000
[830] udc_start()
[9170] -- reset --
[9170] -- portchange --
[9320] fastboot: processing commands
More text is generated when i plug out and plug back in my usb cable. Soo i can't really boot up and i can't use the LGMobile Support Tool to fix my phone. Please help me, thank you!
HyperTsunaz said:
Hi,
I recently tried installing Twrp on my LG F60. It rebooted and now i always encounter a black screen with text after the LG logo.
[710] fastboot.init()
[710] Error: allocating memory for ssd buffer
[810] USB init ept @ 0x8f1ec000
[830] udc_start()
[9170] -- reset --
[9170] -- portchange --
[9320] fastboot: processing commands
More text is generated when i plug out and plug back in my usb cable. Soo i can't really boot up and i can't use the LGMobile Support Tool to fix my phone. Please help me, thank you!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I suggest you to head over here, you may find a good answer.
Good luck!
Related
Hi,
I was installing recovery on my phone but my phone LG P350 (Optimus Me) got stock to "Fastboot mode started" when it tries to reboot itself. Now I cant even use my phone.
When I plugged my USB it says:
Fastboot mode started
udc_start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTOR 128 6 1006 0 10
-- reset --
-- portchange --
-- reset --
-- portchange --
I was on this thread for p500, did the intructions and replaced files from p500 - p350.
link: http://forum.xda-developers.com/showthread.php?t=1088046
But when I tried keying cmd command and typed "fastboot erase recovery", it just says "waiting for device". I really hope someone can help me on this one. Thanks a lot in advance
/sob... T_T I really hope someone would help me out on this problem.
Same problem happened with my P500 today.. I resolved it by flashing KDZ through Emergency mode.
There was no other way. The "fastboot erase recovery" command would stop at "waiting for devices".
Hope so, u resolved the problem since its long back this thread was posted.
If u are still stuck at fastboot mode and no other method works.. Then, kdz may be only way if Emergency Mode can be accessed.
that far i found the same solution, but the weird thing is, everybody is writing to use KDZ_FW_UPD.RAR LG flash utility, but it is nowhere to be found for downloading???
I too face the same problem..the kds shows "device not connected"...i installed the latest drivers for lg p350 but still it shows no response...i read somewhere to open the mob in emergency mod but on doing so also no result...someone pls help me
Hi, first time i am sorry for my bad english.
I have problem with my LG optimus ONE P500. I want to root this phone, so i used manual from link:
http://forum.xda-developers.com/showpost.php?p=15217609&postcount=3
First step, I enabled debubing mode in my phone settings and I connected this phone to notebook over USB cable. I followed steps from manual. After click Download button in LGMDP, phone reboot to emergency mode (green screen) and start. LGMDP recovered and restored NV2 backup and then started upload modificate NV2 to photo (with text something like - burning, but I not sure). After 20 min LGMDP show text: TIMEOUT. Next step I wait a few minutes and disconnected my phone from notebook and manualy rebooted him. If I turn on my phone, Android OS started and worked normaly.
Next step I turn off my phone and use three-button combinatio (home + vol down + power) and phone booted to „fastboot“ mode with text:
Fastboot mode started
udc_start()
Click to expand...
Click to collapse
After connection phone to notebook, display show next lines:
-- suspens --
-- reset --
-- portchange --
-- reset --
-- portchange --
fastboot: processing commands
Click to expand...
Click to collapse
I can´t turn on phone normaly. So I searched manual how to revive a bricked P500 on fastboot mode (link on manual http://forum.xda-developers.com/showthread.php?t=1088046)
But when i write command in windows command line „fastboot erase recovery“ i get message < waiting for device >
Now I trying find and instal a lot of drivers for P500. Windows device manager normal show connected device under Android Phone - USB Modem Phone ADB port. I used LGMobile Support Tool for download driver too. I tried Windows XP and Windows 7, but the same problem. Command line still show <wainting for device>.
I don´t know how to deal problem with communication between phone and notebook. I spend 10 hours with searching how to solve this problem, but all attempts have failed.
Please can you help me?
- Follow the steps mentioned in this Thread :good:
http://forum.xda-developers.com/showthread.php?t=1827723
Phone :- LG Optimus One
Current ROM :- Paranoid Android 2.52 by ByteCode
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
bkpaokfc said:
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally there isn't device forum for your mentioned device so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
Today I got a message that I could update my telephone. So downloaded it, restarted and just near the end of the update install it gave an error.
I tried to restart but didn't get past the boot screen. I can get into the selection menu of recovery mode/ factory mode.
But when I choose factory mode I don' t get past the boot screen and in recovery mode I get a "dead android with: no command" and there is nothing I can do. (I wiped the cache etc. but nothing helped) (ALPS.KK1.MP3.V1)
And I can' t apply an update from ADB because when I connect it to my PC (windows 10) I get the message its not recognized.
Device manager gives this error: Unknown USB device (Device Descriptor Request Failed) Error Code 43.
If I connect my telephone via USB using ubuntu (15.10) it isn' t recognized at all not even when i check with the lsusb command.
I hope someone has an idea to steer me on the right way!
solved
Well.. seems like trying a different cable, trying many usb drivers and reading a bit better also helps! So if you read this and have the same problem: keep trying/ searching/ reading!
Hello everyone.
I'm having trouble fixing my bricked LG G2 (D801/T-Mobile).
The current situation is as follows...
I am able to partially enter download mode within the "DemiGod Crash Handler" screen, I can confirm this by the fact that Windows detects the device the following...
Modems > LGE AndroidNet USB Modem
Ports (COM & LPT) > LGE AndroidNet USB Serial Port (COM41) ( Please note: I changed port in attempt to connect the device to LG Flash Tool v1.8.6.527).
However when I plug the device into the computer and launch LG Flash Tool v1.8.6.527, it begins to flash, then errors out with a "Model Information Check Fail" message.
I did try the KDZ flash method with LG Flash Tool 2014, but that method didn't work because it errored out in "Problems communicating phone and PC". (Please note: I did not modify any COM ports for the device before trying this method. I left it at the default COM3 port).
Anyways... This is my dilemma and I hope someone out there can help me.
SIncerely,
~ Android
EDIT: When attempting to flash using LG Mobile Support Tool, it once again errors out with "Upgrade halted due to lack of battery power" even though I've sat the device in various charging modes for going on 7 days...
AndroidHacker99 said:
EDIT: When attempting to flash using LG Mobile Support Tool, it once again errors out with "Upgrade halted due to lack of battery power" even though I've sat the device in various charging modes for going on 7 days...
Click to expand...
Click to collapse
can you get the device to recovery mode
No, I cannot. It just boots into the DemiGod critical error screen.
No solution has been found. I've since scrapped the device. It's gone now. Thanks everyone for the help. Rest in peace, LG G2 (D801).